ASM Software pack on oracle 10.2

Hi all,
an oracle consultant from germany trying to push us to install an ASM 11.1 ( Oracle Home ) Software for using an Oracle 10.2g database.
Does anyone can confirm that is a good way ?
Are any issues known with this configuration ?
$ORACLE_BASE/product/10.2 <-- for Oracle 10.2g database
$ORACLE_BASE/product/11.1 <-- for the Oracle ASM component.
Thanks
*T

tbrinkmann wrote:
Hi all,
an oracle consultant from germany trying to push us to install an ASM 11.1 ( Oracle Home ) Software for using an Oracle 10.2g database.
Does anyone can confirm that is a good way ?
Are any issues known with this configuration ?
$ORACLE_BASE/product/10.2 <-- for Oracle 10.2g database
$ORACLE_BASE/product/11.1 <-- for the Oracle ASM component.
Thanks
*TIf you are using Oracle Database 10gR2 (database files) in Oracle Software 11.1.
2. choice
1. Upgrade Oracle Database 10gR2 to 11gR1
2. Install different Locations while Oracle ASM and Oracle Database
However, you are storing Oracle database file (10gR2) on Oracle ASM 11gR1, Make sure your ASM DISK GRoup compatibility with rdbms 10.1
Example:
SQL> select name, compatibility, database_compatibility from v$asm_diskgroup;
NAME COMPATIBILITY DATABASE_COMPATIBILITY
DISK01 10.1.0.0.0 10.1.0.0.0
DISK02 10.1.0.0.0 10.1.0.0.0

Similar Messages

How can I install ASM instance in another oracle home?

Hello:
I have installed Oracle 10 g R2 software at a oracle home,and have create a database with an instance named ocafs withou ASM,now I want to install ASM instance and create a new database using ASM,how can I insure that the ASM is installed in it's own oracle home by using dbca or some other tools? And can I specify the instance name of the ASM?
Thank you very much!

Use the oui.exe (Universal Installer), it checks for existing homes. Based on what you want to do (create a new db with ASM), OUI is smart in that in will not let you create it in an existing home. It will prompt for a different location if you try to use an existing home.
Good luck

Bad Software Update: Creative Media Explorer 6.21.08 Software Pack for

I've just tried installing the 9 April update for the Zen Vision:M 30GB - the Creative Media Explorer 6.2.08 Software Pack for the Zen Vision:M30 and 60 GB. This is supposed to run under Vista. Well, it launches fine, but someone forgot to put the install dialogue as the top-level window in the installshield. The dialogue is hopelessly trapped behind the snazzy Creative background screen - it's not a separate application, so there's no way to switch it to the front. If you kill off the upgrade in task manager, you can see the dialogue for a few seconds, then it dies as well. Creative - can you please pull this back and repackage it so that it actually works? Thanks!

Hi,
I have a similar problem with my 8gb?zen. On installation of the sen media explorer I get the error message "Microsoft(C) Register Server has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." Installation completes but media explorer is not installed. As mentioned it doesnt mean the end of the player but it's nice to have full functionality from your new product. The price paid for these players, I think the least we can expect is a working suite of software. Actually, customer service gave up on me and said it is a Vista issue and they have not heard of such a problem before. Hmmmm, unlikely, unless my Vista 32bit (recently installed) configuration is unique.... and you don't exist.?I think they only way to get a solution is if others who have a similar issue post here. Hopefully some genius will figure it out, or Creative will address the issue. Mat

What Features are provided by Software Packs 8.6.1, 2 and 3

We have a UC560 customer with Software Pack 8.2 installed and they are wondering what, if any advantages there are if they upgrade to Software Pack 8.6.2.
I thought there was a good feature Matrix published at one time, but I have been unable to find this. I googled CUE 8.6.5 and Software Pack 8.6.2 but it is as if it vanished from the face of the earth.
Anybody know where I might come up with this?
Thanks in advance.

Hi Paolo,
I have opened a Cisco TAC case to get this resolved. However it seems that the phone can be seen as a CDP neighbour but it is not getting an IP address and is sitting at the Cisco upgrade splash screen.
Thanks
Brian

How to download language pack for Oracle E-Business Suite 12.1

Hi,
I want to download Portuguese language pack for Oracle E-Business Suite 12.1.
However on Oracle E-Delivery, I could not find any language pack for downloading (as it was available for OEBS 11i)
Is there any change in installing language pack on Oracle E-Business Suite 12/12.1 as compared to 11i.
Should i download complete Oracle E-Buisiness Suite installer by selecting the Portuguese language on first page of Oracle E-Delivery?
Please guide.
Thanks,
Rohit

Hi rohit;
I want to download Portuguese language pack for Oracle E-Business Suite 12.1.
However on Oracle E-Delivery, I could not find any language pack for downloading (as it was available for OEBS 11i)
Is there any change in installing language pack on Oracle E-Business Suite 12/12.1 as compared to 11i.
Should i download complete Oracle E-Buisiness Suite installer by selecting the Portuguese language on first page of Oracle E-Delivery?What is your OS? I checked for linux, In e-delivery if you choose :
Oracle E-Business Suite Release 12.1.1 (with NLS Supplement) Media Pack for Linux x86
You will see:
Oracle E-Business Suite NLS Release 12.1.1 - Portuguese V16178-01 681M
Its avaliable there
Hope it helps
Regard
Helios

Harware & software requirements of Oracle 11i &10.7

I'm doing a research in apps 10.7 and 11i . I would
like to have hardware and software equirements for the upgrades and/or
installs.
I would also like to know the forms versions supported by
10.7 and 11 & 11i
Does 11i support forms 9i

Hi Susmitha,
I am not sure abt 10.7 but yes 11i support Form 9i.11i also supports Form 6i.
and there is no predefined hardware and software requirements for oracle apps.
it depeneds on various factor like the instance you want to install, no of concurrent servers, no of users etc.
you can get an idea about the requirments from
installation docs and upgradation docs.
hope this ll help you.
-Yogi

[Blog] Using VMware vROPs to monitor Oracle Database and WebLogic. Management Pack for Oracle EM, Hyperic Plugins, or Both?

This blog post provides a suggested methodology for helping users of VMware vROps/vCOps decide which of the existing solutions, the vROps Management Pack for Oracle EM and the VMware vROps Hyperic Plugins for Oracle, should be used to monitor their Oracle workloads.
It’s been a nearly a year since VMware transferred the vCOps Adapter for Oracle Enterprise Manager (OEM) to Blue Medora and since that transfer Blue Medora has released a number of major updates as well as rebranded it the Blue Medora vROps Management Pack for Oracle EM. Over that same period of time VMware has continued to evolve their Oracle-focused (Oracle Database and WebLogic J2EE) Hyperic agent-based plugins culminating most recently with a October 2014 update to the Oracle Database plugin that provides support for Oracle Database 12c.
vROps for Oracle Database - Management Pack vs Hyperic comparison
Read the rest here.

can you also post 28,000 more lines? I'm sure this will be helpful....

Application Integration Architecture Foundation Pack on Oracle Service Bus

The paper on the Oracle web site from December 2008 titled "Application Integration Architecture Foundation Pack on Oracle Service Bus" is an interesting read. The technology roadmap makes it clear the OSB is the future and current "old" ESB supported by AIA is going on the scrap heap. Now I know the OSB is not a supported platform for even the latest foundation pack so I wonder about why this paper was published. Is Oracle indicating foundation pack v 2.2.x support on OSB? Is it published as a "this is something to look forward to" type document? I honestly wonder since there are some pretty specific instructions on how to get it working and the authors are senior thought leaders for the AIA product.
RICH
2/04/08 Update - I see that with the AIA 2.3 release that Oracle Service Bus did not make the list of supported technology.
Edited by: Rich Naszcyniec on Feb 4, 2009 12:38 PM

Check out this link :
http://steffensinsights.blogspot.com/2012/03/osb-access-to-salesforcecom-part-1.html
in detail info on how you can connect to salesforce alongwith the code sample

Problem installing stuff from software pack N95, m...

Hi,
I bought a Nokia N95 few days ago.
I have success fully installed PC suite.
But,
when I try to install stuff from the "Software Pack CD" it gives me error about missing "MSVCR80.dll".
Can some one tell me how to fix.
I went back to the shop and got the CD changed, but it didn't help.
Also please tell me how can I use Navigation on N95. Do I have to buy the liscence from nokia or there is some other way.

Hi lafanter
Is your Windows NET 2.0 or 3.0 Framework OK?
Happy to have helped forum in a small way with a Support Ratio = 37.0

I need XMANAGER SOFTWARE FOR INSTALLING ORACLE IN SERVER

I NEED XMANAGER SOFTWARE FOR INSTALLING ORACLE IN SERVER.
UR HELP REALLY APPRICATED.

Please get Cygwin, or (Real)VNC, or putty (all free), or eXceed (not free, but free demo),
but do not SHOUT.
Sybrand Bakker
Senior Oracle DBA

What is the difference between free download oracle software and buying oracle???

Dear all,
I am really not understand the question. what is the difference between the free download oracle software and paid oracle software? the free download software can really do sth such as create database, develop some applications.? PLease answer, Thanks firstly!!!
Best regards!
zhw

Learn Step by Step , How to become Oracle Apps DBA completely free at
http://becomeappsdba.blogspot.com
or
http://teachmeoracle.com
Please pass on this to other budding DBA's & Expand Apps DBA community, all content is free only need your feedback & content so I can put it at single place .
Oracle Apps DBA

Software Pack 8.1.0 install fails "Phone Firmware Install failed"

Hello-
I have a brand new UC540 that I am trying to install the latest software pack on (8.1.0) using CCA 3.0.(1). I have gone straight into Maintenance>Software Upgrade and tried to run the update, but it fails with "Software Pack Installation failed, reason = Phone Firmware Install failed". I try to run the Software Pack install without any phone loads selected and the same thing happens. Also tried wiping the system to factory defaults, but it says the current factory default configuration is missing and I must download the version of the software package.
Not sure where to go from here, any suggestions?
Thanks,
Derek

Hi
In addition to David's excellent post make sure you configured the UC's IP Address as default gateway. In my case I had the exactly same problem. After a closer look I noticed that the UC used a different IP address for some tftp requests than the one from the directly connected network.
Connection received from 10.1.10.2 on port 55103 [30/07 12:04:17.989]
Read request for file . Mode octet [30/07 12:04:17.989]
Using local port 65031 [30/07 12:04:17.990]
Peer returns ERROR -> aborting transfer [30/07 12:04:18.007]
Vlan1                      unassigned      YES NVRAM up                    up
Vlan100                    unassigned      YES NVRAM up                    up
NVI0                       10.1.10.2       YES unset up                    up
BVI1                       192.168.10.1    YES NVRAM up                    up
BVI100                     10.1.1.1        YES NVRAM up                    up
Loopback0                  10.1.10.2       YES NVRAM up                    up
It looks like the UC used the Loopback0 IP address which was unknown because of the lack of a route/default gw. after i configured the 192.168.10.1 as default gw, the CCA update run trough like a charm

How to check which software pack I am running on UC560?

I need to figure out if my UC560 needs a software pack upgrade. The show version on the device console shows following. What software pack does it map to?
Cisco IOS Software, UC500 Software (UC500-ADVIPSERVICESK9-M), Version 15.1(4)M5, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 04-Sep-12 20:45 by prod_rel_team
ROM: System Bootstrap, Version 15.0(1r)XA3, RELEASE SOFTWARE (fc1)
dcVAST-UC560 uptime is 6 weeks, 3 days, 14 hours, 56 minutes
System returned to ROM by power-on
System restarted at 17:32:32 CST Thu Feb 20 2014
System image file is "flash:/uc500-advipservicesk9-mz.151-4.M5"
Last reload type: Normal Reload
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected]
Cisco UC560-T1E1-K9 (MPC8378) processor (revision 0x100) with 497664K/26624K bytes of memory.
Processor board ID <Removed>
MPC8378 CPU Rev: Part Number 0x80C4, Revision ID 0x21
64 User Licenses
4 Gigabit Ethernet interfaces
24 Serial interfaces
2 terminal lines
1 Channelized T1/PRI port
1 Virtual Private Network (VPN) Module
4 Voice FXO interfaces
4 Voice FXS interfaces
1 Voice MoH interface
1 cisco service engine(s)
256K bytes of non-volatile configuration memory.
250880K bytes of ATA CompactFlash (Read/Write)

Refer to this: https://supportforums.cisco.com/document/36746/uc-500-software-packs
You are one software pack behind up to date.

How to create an asm instance manaually? oracle 11gr2.

env: oracle 11gr2 os: hpux or aix single machine , not rac.
question:how to create an asm instance manaually?? diskgroup,listener,db ,they can be resigistered to crs??
can anyone give me document about it?

Hi,
This is a simple answer:
Automatic Storage Management (ASM)
ASM was a new storage option introduced with Oracle Database 10gR1 that provides the services of a filesystem, logical volume manager, and software RAID in a platform-independent manner. ASM can stripe and mirror your disks, allow disks to be added or removed while the database is under load, and automatically balance I/O to remove "hot spots." It also supports direct and asynchronous I/O and implements the Oracle Data Manager API (simplified I/O system call interface) introduced in Oracle9i.
ASM is not a general-purpose filesystem and can be used only for Oracle data files, redo logs, and control files. Files in ASM can be created and named automatically by the database (by use of the Oracle Managed Files feature) or manually by the DBA. Because the files stored in ASM are not accessible to the operating system, the only way to perform backup and recovery operations on databases that use ASM files is through Recovery Manager (RMAN).
ASM is implemented as a separate Oracle instance that must be up if other databases are to be able to access it. Memory requirements for ASM are light: only 64 MB for most systems.
Installing ASM
On Linux platforms, ASM can use raw devices or devices managed via the ASMLib interface. Oracle recommends ASMLib over raw devices for ease-of-use and performance reasons. ASMLib 2.0 is available for free download from OTN. This section walks through the process of configuring a simple ASM instance by using ASMLib 2.0 and building a database that uses ASM for disk storage.
Determine Which Version of ASMLib You Need
ASMLib 2.0 is delivered as a set of three Linux packages:
* oracleasmlib-2.0 - the ASM libraries
* oracleasm-support-2.0 - utilities needed to administer ASMLib
* oracleasm - a kernel module for the ASM library
Each Linux distribution has its own set of ASMLib 2.0 packages, and within each distribution, each kernel version has a corresponding oracleasm package. The following paragraphs describe how to determine which set of packages you need.
First, determine which kernel you are using by logging in as root and running the following command:
uname -rm
Ex:
# uname -rm
2.6.9-22.ELsmp i686
The example shows that this is a 2.6.9-22 kernel for an SMP (multiprocessor) box using Intel i686 CPUs.
Use this information to find the correct ASMLib packages on OTN:
1. Point your Web browser to http://www.oracle.com/technology/tech/linux/asmlib/index.html
2. Select the link for your version of Linux.
3. Download the oracleasmlib and oracleasm-support packages for your version of Linux
4. Download the oracleasm package corresponding to your kernel. In the example above, the oracleasm-2.6.9-22.ELsmp-2.0.0-1.i686.rpm package was used.
Next, install the packages by executing the following command as root:
rpm -Uvh oracleasm-kernel_version-asmlib_version.cpu_type.rpm \
oracleasmlib-asmlib_version.cpu_type.rpm \
oracleasm-support-asmlib_version.cpu_type.rpm
Ex:
# rpm -Uvh \
> oracleasm-2.6.9-22.ELsmp-2.0.0-1.i686.rpm \
> oracleasmlib-2.0.1-1.i386.rpm \
> oracleasm-support-2.0.1-1.i386.rpm
Preparing... ########################################### [100%]
1:oracleasm-support ########################################### [ 33%]
2:oracleasm-2.6.9-22.ELsm########################################### [ 67%]
3:oracleasmlib ########################################### [100%]
Configuring ASMLib
Before using ASMLib, you must run a configuration script to prepare the driver. Run the following command as root, and answer the prompts as shown in the example below.
# /etc/init.d/oracleasm configure
Configuring the Oracle ASM library driver.
This will configure the on-boot properties of the Oracle ASM library
driver. The following questions will determine whether the driver is
loaded on boot and what permissions it will have. The current values
will be shown in brackets ('[]'). Hitting <ENTER> without typing an
answer will keep that current value. Ctrl-C will abort.
Default user to own the driver interface []: oracle
Default group to own the driver interface []: dba
Start Oracle ASM library driver on boot (y/n) [n]: y
Fix permissions of Oracle ASM disks on boot (y/n) [y]: y
Writing Oracle ASM library driver configuration: [ OK ]
Creating /dev/oracleasm mount point: [ OK ]
Loading module "oracleasm": [ OK ]
Mounting ASMlib driver filesystem: [ OK ]
Scanning system for ASM disks: [ OK ]
Next you tell the ASM driver which disks you want it to use. Oracle recommends that each disk contain a single partition for the entire disk. See Partitioning the Disks at the beginning of this section for an example of creating disk partitions.
You mark disks for use by ASMLib by running the following command as root:
/etc/init.d/oracleasm createdisk DISK_NAME device_name
Tip: Enter the DISK_NAME in UPPERCASE letters.
Ex:
# /etc/init.d/oracleasm createdisk VOL1 /dev/sdb1
Marking disk "/dev/sdb1" as an ASM disk: [ OK ]
# /etc/init.d/oracleasm createdisk VOL1 /dev/sdc1
Marking disk "/dev/sdc1" as an ASM disk: [ OK ]
# /etc/init.d/oracleasm createdisk VOL1 /dev/sdd1
Marking disk "/dev/sdd1" as an ASM disk: [ OK ]
Verify that ASMLib has marked the disks:
# /etc/init.d/oracleasm listdisks
VOL1
VOL2
VOL3
Create the ASM Instance
ASM runs as a separate Oracle instance which can be created and configured using the Oracle Universal Installer. Now that ASMLib is installed and the disks are marked for use, you can create an ASM instance.
Log in as oracle and start runInstaller:
$ ./runInstaller
1. Select Installation Method
* Select Advanced Installation
* Click on Next
2. Specify Inventory Directory and Credentials
* Inventory Directory: /u01/app/oracle/oraInventory
* Operating System group name: oinstall
* Click on Next
3. Select Installation Type
* Select Enterprise Edition
* Click on Next
4. Specify Home Details
* Name: OraDB10gASM
* Path: /u01/app/oracle/product/10.2.0/asm
Note:Oracle recommends using a different ORACLE_HOME for ASM than the ORACLE_HOME used for the database for ease of administration.
* Click on Next
5. Product-specific Prerequisite Checks
* If you've been following the steps in this guide, all the checks should pass without difficulty. If one or more checks fail, correct the problem before proceeding.
* Click on Next
6. Select Configuration Option
* Select Configure Automatic Storage Management (ASM)
* Enter the ASM SYS password and confirm
* Click on Next
7. Configure Automatic Storage Management
* Disk Group Name: DATA
* Redundancy
- High mirrors data twice.
- Normal mirrors data once. This is the default.
- External does not mirror data within ASM. This is typically used if an external RAID array is providing redundancy.
* Add Disks
The disks you configured for use with ASMLib are listed as Candidate Disks. Select each disk you wish to include in the disk group.
* Click on Next
8. Summary
* A summary of the products being installed is presented.
* Click on Install.
9. Execute Configuration Scripts
* At the end of the installation, a pop up window will appear indicating scripts that need to be run as root. Login as root and run the indicated scripts.
* Click on OK when finished.
10. Configuration Assistants
* The Oracle Net, Oracle Database, and iSQL*Plus configuration assistants will run automatically
11. End of Installation
* Make note of the URLs presented in the summary, and click on Exit when ready.
12. Congratulations! Your new Oracle ASM Instance is up and ready for use.
Kind regards
Mohamed

Windows Server 2008 Service pack 2 - Oracle 10g release2 (10.0.4.0)

I got a question about the installation of oracle 10g release2.
Is there any issues installing oracle 10g release2 on a windows server 2008 with Service pack 2?
here the release
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10204_winx64_vista_win2k8.html
I checked quick start installation guide and I still don't know
please help
Thanks

Pl see if MOS Doc 740926.1 (Where can I find the Database / Client software to download for Microsoft Vista, or Windows 2008R1?) can help
HTH
Srini

ASM Software pack on oracle 10.2

Similar Messages

Maybe you are looking for