+ASM spfile default location of Oracle 11g RAC Linux

Is anybody now the default location of +ASM spfile at Oracle 11g RAC Linux.

ITs there if you dont have the Database installed yet ! +DATA/asm/asmparameterfile/registry.253.725983597

Similar Messages

Oracle 11g RAC installation on windows 2008 64 bit

Hello Everyone,
can i get some details regarding Oracle 11g RAC installation on windows 2008,
minimum Hardware Requirement
Will windows support ASM
Can i get a documentation regarding the RAC installation on windows. we were planning to have 11.5 on windows 2008.
please send me some docs regarding os requirements, installation and ASM details.
Thank you

Hi Everyone,
I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull crs_state -t executed successfully.
Bt the machine got crashed ,when executed a select query with 100 sessions( For performance evaluation using TG). A blue screen is appeared on two nodes. So i am not able to evaluate the performance.
Can you please tell any suggesstions to solve this issue? Is our hardware is not sufficient? Or any software settings has to be done?. I tried most of hte technique ,bt the problem still exists.
The following machine configuration is used for Oracle RAC setup
Intel Core 2 Duo 2.66 GHz,
Ram :4GB.
OS : windows 2008 Server 64 Bit
Oracle RAC , Clusterware 11g R2 64 Bit.

Oracle 11g RAC on RHEL 4.0, error on 1 Node while running ./root.sh for CRS

Hi,
I am trying to install Oracle 11g RAC on RHEL 4.0 on Vmware and at the end of CRS installation when installer asks to run the two scripts (orainstRoot.sh and root.sh) on one node (on the node where runInstaller is started) throws following error
[root@LRAC1 crs]# ./root.sh
WARNING: directory '/xhdd/u01/crs/oracle/product/11.1.0' is not owned by root
WARNING: directory '/xhdd/u01/crs/oracle/product' is not owned by root
WARNING: directory '/xhdd/u01/crs/oracle' is not owned by root
WARNING: directory '/xhdd/u01/crs' is not owned by root
WARNING: directory '/xhdd/u01' is not owned by root
WARNING: directory '/xhdd' is not owned by root
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up Network socket directories
/xhdd/u01/crs/oracle/product/11.1.0/crs/bin/ocrconfig: line 78: /xhdd/u01/crs/oracle/product/11.1.0/crs/bin/ocrconfig.bin: cannot execute binary file
/xhdd/u01/crs/oracle/product/11.1.0/crs/bin/ocrconfig: line 78: /xhdd/u01/crs/oracle/product/11.1.0/crs/bin/ocrconfig.bin: Success
Failed to upgrade Oracle Cluster Registry configuration
[root@LRAC1 crs]#
While on the second node the root.sh script does not give any errors, here the output
[root@LRAC2 crs]# ./root.sh
WARNING: directory '/xhdd/u01/crs/oracle/product/11.1.0' is not owned by root
WARNING: directory '/xhdd/u01/crs/oracle/product' is not owned by root
WARNING: directory '/xhdd/u01/crs/oracle' is not owned by root
WARNING: directory '/xhdd/u01/crs' is not owned by root
WARNING: directory '/xhdd/u01' is not owned by root
WARNING: directory '/xhdd' is not owned by root
Checking to see if Oracle CRS stack is already configured
/etc/oracle does not exist. Creating it now.
Setting the permissions on OCR backup directory
Setting up Network socket directories
Oracle Cluster Registry configuration upgraded successfully
The directory '/xhdd/u01/crs/oracle/product/11.1.0' is not owned by root. Changing owner to root
The directory '/xhdd/u01/crs/oracle/product' is not owned by root. Changing owner to root
The directory '/xhdd/u01/crs/oracle' is not owned by root. Changing owner to root
The directory '/xhdd/u01/crs' is not owned by root. Changing owner to root
The directory '/xhdd/u01' is not owned by root. Changing owner to root
The directory '/xhdd' is not owned by root. Changing owner to root
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: lrac1 lrac1-priv lrac1
node 2: lrac2 lrac2-priv lrac2
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Now formatting voting device: /dev/sdd1
Format of 1 voting devices complete.
Startup will be queued to init within 30 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
Cluster Synchronization Services is active on these nodes.
lrac2
Cluster Synchronization Services is inactive on these nodes.
lrac1
Local node checking complete. Run root.sh on remaining nodes to start CRS daemons.
Any ideas to solve this issue.
Thanks in advance,
Sameer

I tried reinstalling again and it worked on Vmware Server.Some oracle products are certified on Oracle VM , but not RAC at the moment.
You can download Oracle VM from otn.oracle.com
Check ML Note:464754.1 for details about Certified Software on Oracle VM.
- Virag Sharma
http://virag.sharma.googlepages.com/

Upgrade Oracle 10g RAC - Oracle 11g RAC on Linux Environment

We are planning to Upgrade our databases to Oracle 10g RAC - Oracle 11g RAC which is Linux Environment. Kindly suggest me the best option for migration. Our production database size is 80GB.
- Frest installation of oracle 11g using export/iimport dumps
- Migration
- Upgrade process
Any information regarding this will be appreciated.

Pl identify exact versions of "10g" and "11g", along with the exact OS versions.
Pl see the upgrade doc - http://docs.oracle.com/cd/E11882_01/server.112/e23633/toc.htm
HTH
Srini

Upgrade oracle 9i RAC to Oracle 11g RAC

Hi all,
db version:oracle 9.2.0.5 RAC
OS:Linux
My project team and client is planning to upgrade oracle 9i RAC to Oracle 11g RAC.
please suggest any MOS notes any links.
thanks,
Visu.
Edited by: visu996253 on Apr 8, 2013 5:30 AM

db version:oracle 9.2.0.5 RAC
OS:Linux
My project team and client is planning to upgrade oracle 9i RAC to Oracle 11g RAC.
please suggest any MOS notes any links.Master Note For Oracle Database Upgrades and Migrations [ID 1152016.1]
http://www.oracle.com/technetwork/products/upgrade/index-088044.html
785351.1 - Oracle 11g Upgrade Companion
http://download.oracle.com/docs/cd/E11882_01/server.112/e17222.pdf - Oracle® Database Upgrade Guide 11g Release 2 (11.2) E10819-02
Edited by: KR10822864 on Apr 8, 2013 5:52 AM
added more info.

Which one is best option RAC 10g or oracle 11g RAC for certifiction point ?

hi ,
which one is best option RAC 10g or oracle 11g RAC for certifiction point of view?
can any one detail difference between above 2 options?
Regards,
A.Anwar

A. Anwar wrote:
hi ,
which one is best option RAC 10g or oracle 11g RAC for certifiction point of view?
can any one detail difference between above 2 options?The main difference is: Oracle Lifetime Support
Premier Support Ends
Oracle 10g R2 - Jul 2010
Oracle 11g R2 - Jan 2015
Extended Support Ends
Oracle 10g R2 - Jul 2013
Oracle 11g R2 - Jan 2018
http://www.oracle.com/us/support/library/lifetime-support-technology-069183.pdf
Oracle 10g R2 is getting unsupported.

Best practice for installation oracle 11g rac on windows 2008 server x64

hello!
can somebody tell me a good book or an other kind of literature regarding "best practice for installation oracle 11g rac on windows 2008 server x64"? thx in advance!
best regards,
christian

Hi Christian,
Check this on MOS
*RAC Assurance Support Team: RAC Starter Kit and Best Practices (Windows) [ID 811271.1]*
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=BULLETIN&id=811271.1
DOC Modified: 14-DEC-2010
Regards,
Levi Pereira

Install Oracle 11G, RAC with VMWare, APPS R12, and OBIEE on one server?

Dear Experts,
I'm looking to upgrade my skills, and want to learn more of:
Oracle 11G, RAC, VMWare, APPS R12, and OBIEE
My server has two quad cores (8 CPU altogether) and 16 gigs of RAM.
Years ago, I took a shots at installing RAC on multiple servers and firewire.
One thing I remember was that after I installed RAC, I was not able to use the database unless I enabled all the RAC processes on the server. So, I was not able to just boot the database and use it in the traditional single server manner.
Which I will also want to do.
1) Does this symptom/aspect/characteristic of RAC install still exist?
2) Is it realistic to install all this software on one server?
If so, what is the order of operations for the install?
3) If I have to prioritize, I'd like to install
Oracle 11G, OBIEE, and APPS R12,
Would installing R12 and OBIEE on the same server present any conflicts or issues?
If not, what is the order of operations for the install?
11G, R12, then OBIEE?
Thanks a lot!

Hi,
1) Does this symptom/aspect/characteristic of RAC install still exist?No.
2) Is it realistic to install all this software on one server?
If so, what is the order of operations for the install?For learning/traning/demonstration purpose you can Install all these software on same machine.
3) If I have to prioritize, I'd like to install
Oracle 11G, OBIEE, and APPS R12,
Would installing R12 and OBIEE on the same server present any conflicts or issues?
If not, what is the order of operations for the install?
11G, R12, then OBIEE?There will not be any conflicts. I would suggest you to select vmware or virtual box in order to configure all these sw's.
I have done such a configuration on my laptop with i7 Quad processor, 16GB RAM and 640 GB HDD.
I have Installed 2 node RAC, 2 Node ERP and all are running smoothly without any issues.
Refer:
http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
thanks,
X A H E E R

Add a node to Oracle 11g RAC

Good Morning.
Can somebody give a short and good guide to add a node to Oracle 11g RAC running on Suse Linux 10.?
Thanks

Hi,
Please find the below demo from oracle,
http://st-curriculum.oracle.com/demos/db/11g/r2/grid_rac/04_clusterware_add_node/clusterware_add_node.swf
Hope this helps.
Regards,
Anand.

Migrating MySQL database to Oracle 11g RAC

Hi,
I would like to migrate an entire database from MySQL to my new Oracle 11g RAC. How do I do it?

Hi Turloch,
I was able to configure SQLDeveloper to connect to Oracle and MySQL.
I am having a hard time migrating data from mysql maybe due to table size. I got mysql tables with more than 20M and the PC am running the sqldeveloper is running out of memory every time I try to migrate the tables.
Can you share some experience migrating from MySQL to Oracle?
Thank You.

Install Oracle 11g RAC on Solaris 10

Hello,
I'm new joined DBA in my organization.
There is a requirement from a client to install Oracle 11g RAC on Solaris 10 env.
Can anybody please guide me with some doc or pdf for the steps.
Till now, i've install Oracle 11g DB on Solaris, but i'm pretty new to RAC env.
Note:
I've to do installation via commands, No GUI.
Thanks for your help.
Regards,
Gags

Hi,
Q) Can Oracle 11g Release 2 RAC be installed on Solaris (x86)??yes, you can Install it on Solaris X86
Q) Can the links of Oracle RAC installation over Unix and Linux be taken as base?? As i haven't seen any doc for installing 11g RAC on Solaris, where as it was provided in Oracle 10g.yes, you need to consider Oracle RAC installation over Unix and Linux be taken as base as base document.
http://download.oracle.com/docs/cd/E11882_01/install.112/e17214/toc.htm
In addition Refer:
http://www.oraclemasters.in/?p=963
thanks,
X A H E E R

Oracle 11g RAC health check

Hi All,
oracle 11g R2
RHEL5
can anyone please suggest how to do oracle 11g RAC database health check?suggest any link or metalink notes if any?
thanks,
Mike.

Hi,
You can use RACcheck tool for monitoring can download from here :RACcheck - RAC Configuration Audit Tool (Doc ID 1268927.1)
HTH

Siebel database migration from Sql Server 2005 to Oracle 11g RAC.

Hi,
We would like to migrate our Siebel database from Sql Server 2005 to Oracle 11g RAC. Can you suggest the best way to do that ?
The current configurations are:
Application : Siebel
database : SQL Server 2005
The hardware can be changed if needed. Can you please suggest the best approach ?
Thanks,
Naveen.
Edited by: Naveen Kumar C on Mar 18, 2011 9:10 PM
Edited by: Naveen Kumar C on Mar 18, 2011 11:44 PM

Hi Naveen,
We would like to migrate our Siebel database from Sql Server 2005 to Oracle 11g RAC. Can you suggest the best way to do that ?You will need much more which suggestions.
You will need a Siebel professional which has done this type of migration. Migrating the Database is not a task so hard, after migrating your environment should be functional and healthy it is usually the task problematic.
The hardware can be changed if needed. Can you please suggest the best approach ?We can recommend the minimum recommended, but this documentation already does, you need to do a analysis on your environment and ask a vendor Siebel tell the which is recommended for you and how to find the best "number" for you, in your case is very hard because everything changes.
Check this Step-by-Step
Migrating a Microsoft SQL Server Database to Oracle Database 11g
http://st-curriculum.oracle.com/obe/db/hol08/sqldev_migration/mssqlserver/migrate_microsoft_sqlserver_otn.htm
Regards,
Levi Pereira

Can Oracle 11g RAC support 2 separate databases?

1. Can Oracle 11g RAC support 2 separate databases given that it asks for SCAN ip for cluster with a single Listener port number?
2. Will the Oracle 11.2 database connections work successfully if I setup a mandatory DNS server within the Oracle RAC servers?
I'm leading a team for a 11g project and appreciate responses.
Thanks
Satish.

No Real Application Cluster technology has ever supported more than one database.Quite untrue.
I know that both you and Tom Kyte take the stand that a cluster should have only 1 instance per node.
That doesn't mean that it is not possible to have more than one database in a cluster -- i.e more than one instance in a node.
That doesn't mean that it must always be so. Installing a separate cluster and additional EE + RAC licences for a separate database can be quite expensive. Of course, your reply is "consolidate". That is another debate that has been going on for years.
A discussion on multiple databases on RAC is also at
http://www.freelists.org/post/oracle-l/multiple-databases-in-a-single-RAC-cluster
Hemant K Chitale
Edited by: Hemant K Chitale on Jan 12, 2010 11:15 AM

Ordered processing required from Oracle 11g on Linux to BizTalk Server

Need a viable solution enabling ordered processing (OP) of messages from Oracle 11g on Linux allowing for ordered delivery to subscribers in BizTalk over MSMQ.
We are currently running BizTalk 2010 (with Adapter Pack 2010) and are using ordered delivery for inbound messages to Oracle (received from msmq) but not for outbound messages since the Wcf-adapters doesn't support Ordered Processing in a receive port/location
(except for msmq). However, we do need to implement ordered processing for outbound messages also. It's a major drawback that the Wcf-adapters does not support ordered processing not even with restricted or limited functionality.
Our current implementation is polling Oracle using the Wcf-adapter calling PLSQL-package functions that handles all logic and returns a pre-built XML in a CLOB/string to BizTalk.
Since Oracle is hosted on Linux we can't switch the PLSQL-logic to use Oracle COM-automation and post XML directly into MSMQ which otherwise would have been a quick solution. Also no WebSphere MQ (MQSeries) exists on the premises ruling out that adapter.
Preferences:
- Stable and reliable message transfer with ordered processing from Oracle to BizTalk
- Messaging only pattern (generic) preferred over custom Orchestations (such as re-sequencing pattern)
- Products preferred over custom development (within reasonable price limits).
- Follow Microsoft best practices if possible
In-house development of a custom BizTalk adapter or a nt-service bridging from Oracle to MSMQ could be considered as an option.
regards
/Henrik
/Henrik

Thanks for the reply but it's not that easy I'm afraid, if it had then this post would never have been written.
We're retrieving one message at the time and with pollWhileDataFound=true so that's all good.
The problem is that the inner workings of the wcf-adapters are multithreaded and can not guarantee ordered delivery (which also has proven itself).
The answer why can be found in this post
http://blogs.msdn.com/b/paolos/archive/2009/11/17/customizing-and-extending-the-biztalk-wcf-adapters.aspx
Here's the crucial part: "The WCF Adapters create a separate ServiceHost and singleton service object of this class for each receive location to handle client requests for the lifetime of the BizTalk Host instance running WCF receive locations. The service
object uses multiple threads to process messages concurrently unless the WCF-NetMsmq receive locations are used with the Ordered processing property being selected"
(this is also why I'm wondering why Microsoft doesn't provide the option to run ordered delivery with other wcf-bindings than NetMsmq...)
The search for ordered processing out of Oracle continues...
regards
/Henrik

+ASM spfile default location of Oracle 11g RAC Linux

Similar Messages

Maybe you are looking for