ASM with multiple databases

I need to create lots of databases on a single server for development/testing work but am not sure if I should create a single ASM instance to serve all of them, or one ASM instance per database. I need all databases to use different disk groups anyway, so is there a "best" way?
Would this change if the databases are for production use?

>>>>I should create a single ASM instance to serve all of them, or one ASM instance per database.
You can have only one ASM instance per server..
I need all databases to use different disk groups anyway, so is there a "best" way?
You can create one ASM instance and then create different Diskgroups and have each instance use a different diskgroup.
HTH
Thanks
-Chandra Pabba

Similar Messages

How to investigate high io in a RAC with multiple databases?

how to investigate high io in a RAC with multiple databases?

RAC is saying that a single server lacks the processing capacity needed for databaseA. So additional databaseA instances on additional servers are needed in order to meet the processing demands for databaseA. Thus RAC is required.
Multiple databases on a single server says that the server has spare processing capacity and that it can not only deal with databaseA processing demands, but also with the processing load of databaseB.
So how does your statement about running multiple database RAC instances on the same RAC server node, make sense? And does your I/O issue not immediately point to the fact that no, RAC server1 cannot deal with the I/O resources required by both databaseA and databaseB?
After all, how is I/O scaled on RAC? How is ANYTHING scaled on RAC? By adding more databases to a RAC server node? Of course NOT!!
RAC scales by adding more servers (with a new database instance each) to a physical database in order to scale processing capacity and I/O. By adding more I/O channels to access the SAN/shared storage. By adding more CPUs to increase processing capacity.
Bluntly put - multiple RAC database instances on a single RAC server node is kind of an idiotic approach to scalability in my view....

Can we link one application instance with multiple databases ?

We have R12.1.1 and db is 11.1.0.7 on redhat 5.3 ( 64 bit).
Can we link one application instance ( apps / , inst / ) with multiple database ( db / ),
is this possible ?
if yes how ?

>
Can we link one application instance ( apps / , inst / ) with multiple database ( db / ),
is this possible ?
No. You cant link application tier with more than one database.
Similar query already answered by Hussein in detail in the forum :Re: Multiple instances, single Apps tier Please check that for more details
-Rk

RAC with multiple databases

hi,
we are evaluating a design for the configuration of 3 databases in 10g RAC in linux
Available HW: 2 servers each with 32 gb ram
No of databases need to be configured :3
what would be the effective configuration?
the options we think are,
1) One 2 Node RAC with 3 databases or
2) Three 2 Node RAC each with 1 database each
what would be the licencing cost in different options
please help
tia,
newbie
Edited by: user570138 on May 26, 2009 11:29 PM

user570138 wrote:
hi,
sorry, am new to RAC.
heard about one implementation wherein with a h/w of 2 servers,
1) 2 node cluster for one database
2) single node cluster for the second database in one of the servers.
is it possible to configure multiple clusters on the same machines?
here in our case, we have 3 databases that need to part of RAC configuration.A single node cluster? A "cluster" implies two or more servers.
If you have two servers, you can create two node cluster for any number of RAC database(s).
Also you can create stand-alone database(s) on either server.
If you use VM, you can cluster as many VM machines as you have configured.

ASM managing multiple databases

Our db is 10.2.0.3 and server is MS 2003. Storage for databases is EMC.
We have one ASM instance which is used for managing multiple databases. When I logon to one database and query v$asm_diskgroup I can see all diskgroups in the ASM which means that I can see diskgroups which belong to other databases. Is this correct? We have experienced some temp data files corruptions so I am wondering if these two are related.
Thanks for your inputs and have a great weekend!
Shirley

We have one ASM instance which is used for managing
multiple databases. When I logon to one database and
query v$asm_diskgroup I can see all diskgroups in the
ASM which means that I can see diskgroups which
belong to other databases. Diskgroups do not belong to any database, files within diskgroups belong to databases, but diskgroups belong to ASM, which is a separate instance, and can exist without any database.
We have experienced some temp data files corruptions
so I am wondering if these two are related.I don't think so...

Working with multiple databases

Suppose I have a large project that follows the formal "SDLC" model for software development; it has various stages, environments, development, integration testing, system testing, UAT, etc. Each of these environments is on its own dedicated Oracle database.
An query-only Apex application is built as a testing aid for the various environments to quickly see reports, test data conditions, etc. This application is deployed to all the environments.
With other web development technologies (PHP, ASP/.NET, etc) which live outside Oracle and access Oracle using a userid/connect string. If some aspect of the application needs to be changed, it is done in 1 place (the application) and the new/modified functionality is available for use against all the enviroments (just change the connect string in the URL or some config file to access different environments).
With Apex, the change to the application has to be done in all the 4 environments. This seems like a case where the Apex architecture (all app metadata in Oracle) is a disadvantage.
Comments? Thanks

That would be that case if you are only talking about only moving through the SDLC with your database changes yes? In many cases, you make changes both to the underlying database structure/code and the application (PHP, ASP, etc) so your application would "follow" your database code wouldn't it?
chet
*Disclaimer: I have not worked in such an environment in about 2 years, so I'm a bit rusty.

How to Connect crystal report with multiple databases?

I Think my question is really clear
I ask this because i think i already used every way logic in my head
ConnectionInfo
IConnectionInfo
PropertyBag
DataDefModel
Etc
i found Ludek's post about "Ras Connection Info Code" i think this will solve my case but still no luck
Dear Ludek i try your suggestion from here Until the "Ras Connection Info Code" give an Error
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.IndexOutOfRangeException: Index was outside the bounds of the array.
   at CodeBuilder_RasConnectionInfo.frmRasConnectionInfo.VBConnectionCode(ReportDocument boReportDocument) in C:\Reza\Development\CodeBuilder-RasConnectionInfo\Form1.vb:line 183
   at CodeBuilder_RasConnectionInfo.frmRasConnectionInfo.btnLoadReport_Click(Object sender, EventArgs e) in C:\Reza\Development\CodeBuilder-RasConnectionInfo\Form1.vb:line 16
   at System.Windows.Forms.Control.OnClick(EventArgs e)
   at System.Windows.Forms.Button.OnClick(EventArgs e)
   at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
   at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ButtonBase.WndProc(Message& m)
   at System.Windows.Forms.Button.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
    CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
CodeBuilder-RasConnectionInfo
    Assembly Version: 1.0.0.0
    Win32 Version: 1.0.0.0
    CodeBase: file:///C:/Reza/Development/CodeBuilder-RasConnectionInfo/bin/Debug/CodeBuilder-RasConnectionInfo.exe
Microsoft.VisualBasic
    Assembly Version: 8.0.0.0
    Win32 Version: 8.0.50727.4927 (NetFXspW7.050727-4900)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.VisualBasic/8.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
System
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
System.Windows.Forms
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
System.Drawing
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
System.Configuration
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
System.Xml
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
System.Runtime.Remoting
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Runtime.Remoting/2.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
CrystalDecisions.CrystalReports.Engine
    Assembly Version: 13.0.2000.0
    Win32 Version: 13.0.0.99
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.CrystalReports.Engine/13.0.2000.0__692fbea5521e1304/CrystalDecisions.CrystalReports.Engine.dll
CrystalDecisions.Shared
    Assembly Version: 13.0.2000.0
    Win32 Version: 13.0.0.99
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.Shared/13.0.2000.0__692fbea5521e1304/CrystalDecisions.Shared.dll
CrystalDecisions.ReportAppServer.CommLayer
    Assembly Version: 13.0.2000.0
    Win32 Version: 13.0.0.99
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.ReportAppServer.CommLayer/13.0.2000.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.CommLayer.dll
CrystalDecisions.ReportAppServer.ClientDoc
    Assembly Version: 13.0.2000.0
    Win32 Version: 13.0.0.99
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.ReportAppServer.ClientDoc/13.0.2000.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.ClientDoc.dll
System.Data
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
    CodeBase: file:///C:/Windows/assembly/GAC_32/System.Data/2.0.0.0__b77a5c561934e089/System.Data.dll
CrystalDecisions.ReportAppServer.Controllers
    Assembly Version: 13.0.2000.0
    Win32 Version: 13.0.0.99
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.ReportAppServer.Controllers/13.0.2000.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.Controllers.dll
CrystalDecisions.ReportAppServer.DataDefModel
    Assembly Version: 13.0.2000.0
    Win32 Version: 13.0.0.99
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.ReportAppServer.DataDefModel/13.0.2000.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.DataDefModel.dll
CrystalDecisions.ReportAppServer.DataSetConversion
    Assembly Version: 13.0.2000.0
    Win32 Version: 13.0.0.99
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.ReportAppServer.DataSetConversion/13.0.2000.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.DataSetConversion.dll
CrystalDecisions.ReportAppServer.CubeDefModel
    Assembly Version: 13.0.2000.0
    Win32 Version: 13.0.0.99
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.ReportAppServer.CubeDefModel/13.0.2000.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.CubeDefModel.dll
CrystalDecisions.ReportAppServer.ReportDefModel
    Assembly Version: 13.0.2000.0
    Win32 Version: 13.0.0.99
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.ReportAppServer.ReportDefModel/13.0.2000.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.ReportDefModel.dll
log4net
    Assembly Version: 1.2.10.0
    Win32 Version: 1.2.10.0
    CodeBase: file:///C:/Windows/assembly/GAC_32/log4net/1.2.10.0__692fbea5521e1304/log4net.dll
System.Web
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
    CodeBase: file:///C:/Windows/assembly/GAC_32/System.Web/2.0.0.0__b03f5f7f11d50a3a/System.Web.dll
CustomMarshalers
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
    CodeBase: file:///C:/Windows/assembly/GAC_32/CustomMarshalers/2.0.0.0__b03f5f7f11d50a3a/CustomMarshalers.dll
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
    <system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
i don't know what happen
is there any way to solve my case??
actually i only need 3 databases connected in my report
in each databases i insert about 3 - 8 command
i'm using VS2010 Ultimate
CR Version=13.0.2000.0 (ASP.Net)
SQL Server Standard Edition 10.50.2500.0
and
SQL Server Standard Edition 10.50.1600.1 to test move the datasources
can someone give me an enlightment about my case
every suggestion would be great
Thanks
Zeal

Just as an FYI. there is a utility that will actually write the code out for you. See KBA 1553921 - Is there a utility that would help in writing database logon code?
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Single Weblogic Process with multiple databases

Hi,
Presently we are working with two seperate weblogic processes with for two different
database schemes. The weblogic properties are defined differently in two weblogic.properties
files.
Is there a way to start weblogic in a single process so that it will work with
two different DB schemes at runtime?
Thanks,
Danny.

You have to use XA Driver which supports Distributed Transactions. This is
supported from 6.0.
Weblogic provides Type2 XA driver for Orcale and Oracle's Thin Driver
Version 817 supports
XA operations.
Go through these doc's for more info:
http://e-docs.bea.com/wls/docs61///adminguide/jdbc.html
http://e-docs.bea.com/wls/docs61/////jta/thirdpartytx.html
-krishna
"Daniel Gordon" <[email protected]> wrote in message
news:3b680f81$[email protected]..
>
Hi,
Presently we are working with two seperate weblogic processes with for twodifferent
database schemes. The weblogic properties are defined differently in twoweblogic.properties
files.
Is there a way to start weblogic in a single process so that it will workwith
two different DB schemes at runtime?
Thanks,
Danny.

Same sql query with multiple database links

Hi All,
i want to execute an sql query for a SELECT LIST Item. which should use database links in it's query.
i'm having a list of database links in the region. say :LOC which is having 10 items each linking to different databases.
i want to use following query for another item in same page.
select customer_name from working_lines@:LOC where
phone_no:phone_no
can i do this.
Thank you All.

What we have done before is to create a report based on a PL/SQL procedure that returns a SQL statement.
The PL/SQL code grabs the "selected" database link from :LOC and parses the SQL QUERY you want to execute replacing some token (like [LINK]) with '@DBNAME'.
Lets say your SQL statement is coded like this:
mySQL := 'SELECT cust_name FROM working_lines[LINK] where phone_no = :Phone;'
Then all you would have to do to replace '[LINK]' with the proper DB alias would be:
mySQL := REPLACE(mySQL, '[LINK]', '@'||:LOC);
and then return the new SQL ...
if :LOC has something like 'V10GPROD' your SQL would look like :
SELECT cust_name FROM working_lines@V10GPROD where phone_no = :Phone;
The beauty of this is that you can also include a "null" option that means the select statement will be executed on THIS database...
Doug

Possible to sync multiple phones with multiple database?

Forgive me if this has been covered, if so please point me to the right thread...
Ok, I have two phones and one pda. I'd like to keep different database (and yet be able to selective choose data from one database to another). Is this possible?
The reason for this setup is that I have one USA phone and one Taiwan phone and one PDA (with less dialed contacts). Obiviously, when I'm in Taiwan, I don't need any USA contacts in my Taiwan phones. (I know phones nowadays have enough memory to fit 100s of contacts, but I don't wan to scroll through a bunch of contacts that I don't need.)
Any solution to this using iSync?
Thanks!

It depends entirely upon your mobile handset. Generally speaking, you can choose to synchronize by Address Book group, and not synchronize your entire Address Book database with each device. This is certainly supported by iSync for Palm devices.
To determine the options for each handset and your PDA, select each one in iSync to drop down a configuration dialog specific to that device.

RMAN with multiple databases

Hi,
I need to define a mechanism with RMAN to backuptwo databases where information is copied from one to another by using Oracle Data Integrator CDC.
How can I backup and recover both databases and it still sync?
Thanks
Homero

Yes.
And that is why I said "If you create distributed transactions between two Oracle databases, a Global SCN is synchronised".
YOU CREATE distributed transactions.
Test it out.
Put two dummy tables in each database.
Have a database link configured.
Run some distributed transactions.
Check the SCNs.
Hemant K Chitale

3.1 upgrade with multiple databases

We have 3 Oracle databases (10g) with APEX on a server. Two databases run with APEX 3.0 & one still runs with APEX 2.
I want to upgrade to APEX 3.1. I ran the apexins script against the APEX 2 database, but now I'm faced with the step of copying the new 3.1 images over the old image file. My questions is what will happen to my existing 3.0 APEX installations if I copy the new image files?

Hello,
>> For some reason, I was able to run both APEX 2 & APEX 3 on the same server,…
By “on the same server” you probably mean the same HTTP server. This is a supported configuration. A single OHS can support more than one APEX instance, and they don’t have to be the same version. A single database can’t support more than one version of APEX.
>> … but I can't figure out why except to say that the 2.0 and 3.0 images were somehow compatiable …
New ‘images’ directory, for a newer version, usually add features – icons, themes, templates etc. – to the directory, and don’t delete old stuff. Even the built-in JavaScript library maintains backward compatibility. That means that early version of APEX, like 2.x, can find anything it needs in an ‘images’ directory from 3.x version.
>> But it looks to me like the 3.0 & 3.1 images are incompatible.
I’m not sure what you mean by compatible, but the 3.1 version of ‘images’ is quite different – content and structure wise - from the 3.1 version. Still, application that was built using 3.0 should run with the 3.1 ‘images’ version. The reverse direction is, of course, not possible.
Regards,
Arie.

Not able to work with multiple Databases using oracle.jdbc.driver.OracleDr

Hi all,
I am using the following Oracle Driver in Weblogic 6.1 sp 4
oracle.jdbc.driver.OracleDriver / jdbc:oracle:thin:
Driver. I am not able to select rows from two different table, which resides in two different Databases.
The Exception is :
SQL Exception Connection has already been created in this tx context for pool named CDPool. Illegal attempt to create connection
nother pool: MultiTransactionTest
Start server side stack trace:
java.sql.SQLException: Connection has already been created in this tx context for pool named CDPool. Illegal attempt to create c
on from another pool: MultiTransactionTest
at weblogic.jdbc.jts.Driver.getExistingConnection(Driver.java:288)
at weblogic.jdbc.jts.Driver.connect(Driver.java:123)
at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:214)
at weblogic.jdbc.common.internal.RmiDataSource_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:305)
at weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java:93)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:274)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:22)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
End server side stack trace
Can any one help me to fix this issue?
-Thanks & Regards,
Shamil.S

Shamil S wrote:
Hi all,
I am using the following Oracle Driver in Weblogic 6.1 sp 4
oracle.jdbc.driver.OracleDriver / jdbc:oracle:thin:
Driver. I am not able to select rows from two different table, which resides in two different Databases.
The Exception is :
SQL Exception Connection has already been created in this tx context for pool named CDPool. Illegal attempt to create connection
nother pool: MultiTransactionTestHi. You can't domultiple DBMSes in one transaction unless you use an XA driver and
an XA transaction. Your workarounds are:
1 - Use an XA driver, datasource, and tx
2 - If you're just reading, you can use non-transactional datasources. Do make sure you
always close your connections...
Joe
>
Start server side stack trace:
java.sql.SQLException: Connection has already been created in this tx context for pool named CDPool. Illegal attempt to create c
on from another pool: MultiTransactionTest
at weblogic.jdbc.jts.Driver.getExistingConnection(Driver.java:288)
at weblogic.jdbc.jts.Driver.connect(Driver.java:123)
at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:214)
at weblogic.jdbc.common.internal.RmiDataSource_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:305)
at weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java:93)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:274)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:22)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
End server side stack trace
Can any one help me to fix this issue?
-Thanks & Regards,
Shamil.S

Multiple Keyword Sets (For Multiple Databases)

I work with several different Lightroom databases and it would be nice to be able to have separate sets of keywords that go with each database.
In my specific case, I use one database for my personal photographic endeavors and another for an image library for our church. The keywords tags used for my Nature photography images and the tags used for the event photography shots for church are very different. Hence, there are lots of keywords in both libraries that have zero images attached to them.
It would be very useful in you could allow multiple keyword sets to track with multiple databases.
Dave Mayfield

There issues'Purge unused Keywords' option under Menu/Metadata.
Don't ya know.
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.9 & Win XP, Pentax *ist D
http://donricklin.blogspot.com/

Handling multiple database with 10g CONSOLE

Hello list,
How do we handle multiple databases with 10g Enterprise Console?
We are running Oracle 10.1.0.2.0 on Windows 2003 server. I have one database setup but I need to install more databases and am having difficulty accessing and managing the second database. thanks for your input.

may be you can try the following:
1) create a file named new_target.xml with the following:
<Target TYPE="oracle_database" NAME="DBAPV9.WORLD" DISPLAY_NAME="DBAPV9">
<Property NAME="OracleHome" VALUE="/opt/oracle/app/oraadm9i/product/9.2.0.4"/>
<Property NAME="UserName" VALUE="sys" ENCRYPTED="FALSE"/>
<Property NAME="password" VALUE="thepassword" ENCRYPTED="FALSE"/>
<Property NAME="Role" VALUE="sysdba"/>
<Property NAME="MachineName" VALUE="machine.domain"/>
<Property NAME="Port" VALUE="1521"/>
<Property NAME="SID" VALUE="DBAPV9"/>
</Target>
replace as appropriate
2) Execute emctl config agent addtarget new_target.xml
3) Execute emctl stop dbconsole
4) Execute emctl start dbconsole

ASM with multiple databases

Similar Messages

Maybe you are looking for