+ASM1 and +ASM2 Metric Collection ERRO

My database targets in my GRID are OK, but my ASM instance have Metric Collection Erro. Someone know what can i do?
In database, i just ADD then manually and after CONFIGURE including the PASSWORD for DBSNMP and it works.
Cheers,
Elber Portugal

I configure in GRID ALL TARGET with user SYS, but nothing hapens.
I alredy insert the CREDENTIAL for ASM instance in my Automatic Storage Management Preferred Credentials .
I think in REMOVE and put the again just to see if works, any other idea?
Tks,
Elber

Similar Messages

Grid Control EMC Clariion Metric Collection Error

Hi,
I just deployed the EMC Clariion plugin and I get a metric collection error:
Storage Processor Configuration Collection Failure
Can't call method "che_freemem" on un undefined value at /<agent_path/sysman/admin/scripts/emx/emc_clariion_storage/emc_clariion_processor.pl line 127.
Anyone got any idea?
Cheers,
Olivier

It could be a parsing error due to unstrucured format of the navicli out put.
other metrics and reports should work fine.
Not a consistent error . Not seen on other deployments.

Do I need to restart agent when metric collection was disabled ?

Hi,
I've got OMS 10.2.0.4 and disabled some metrics. Do I need to restart agent to make him stop collecting that metric.
Regards.
Greg

Well,
I used browser , connected to OMS (Enterprice Manager) and in 'Metric and Policy Settings' for our SQLServer target I disabled collection of
'Event Severity' .
But to be honest I think that we need to disable (entries from MGMT_METRICS):
TARGET_TYPE     TYPE_META_VER     CATEGORY_PROP_1     CATEGORY_PROP_2     CATEGORY_PROP_3     CATEGORY_PROP_4     CATEGORY_PROP_5     METRIC_NAME     METRIC_TYPE     USAGE_TYPE     METRIC_GUID     METRIC_COLUMN     COLUMN_LABEL     COLUMN_LABEL_NLSID     METRIC_LABEL     METRIC_LABEL_NLSID     KEY_COLUMN     KEY_ORDER     NUM_KEYS     DESCRIPTION     DESCRIPTION_NLSID     UNIT     UNIT_NLSID     SHORT_NAME     SHORT_NAME_NLSID     IS_FOR_SUMMARY     KEYS_FROM_MULT_COLLS     STATEFULL     IS_REPOSITORY     AUTHOR     SOURCE_TYPE     SOURCE     LOAD_TIMESTAMP     IS_TRANSPOSED     IS_TEST_METRIC     HAS_PUSH     HAS_PULL     REMOTE     REPO_TIMING_ENABLED     NON_THRESHOLDED_ALERTS     KEYONLY_THRESHOLDS     IS_LONG_RUNNING     IS_RENDERABLE     EVAL_FUNC
microsoft_sqlserver_database     4.6                                   MSSQL_ErrorLogEntry_2005     1     0     00D9055D06020E299DA4E9D7364E60A1     categorystring     Category     ms_sqlserver_eventlog_categorystring     Event Log Entry          logfile;recordnumber     0     2                         Category          0     0     1     0     ORACLE     0          2009-02-04 10:51:35     0     0     0     1     0     0     0     0     0     1
microsoft_sqlserver_database     4.6                                   MSSQL_ErrorLogEntry_2005     1     0     6129D1142145998ACFEBF9254A28BA7C     timegenerated     Date-Time     ms_sqlserver_eventlog_timegenerated     Event Log Entry          logfile;recordnumber     0     2                         Date-Time          0     0     1     0     ORACLE     0          2009-02-04 10:51:35     0     0     0     1     0     0     0     0     0     0
microsoft_sqlserver_database     4.6                                   MSSQL_ErrorLogEntry_2005     1     0     85E9698C488EC0254B1AFB3A414E11E3     type     Event Severity     ms_sqlserver_eventlog_type     Event Log Entry          logfile;recordnumber     0     2                         Event Severity          0     0     0     0     ORACLE     0          2009-02-04 10:51:35     0     0     0     1     0     0     0     0     0     1
microsoft_sqlserver_database     4.6                                   MSSQL_ErrorLogEntry_2005     1     0     9EB6E523B593FE7F8DE93B81496657D7     message     Description     ms_sqlserver_eventlog_text     Event Log Entry          logfile;recordnumber     0     2                         Description          0     0     1     0     ORACLE     0          2009-02-04 10:51:35     0     0     0     1     0     0     0     0     0     1     there was a lot of entries like that 'Login succeeded for user ....' , moreover those metrics are filling our MGMT_STRING_METRIC_HISTORY
table with 400 000 entries per 24h .
I'm not sure where can I disable that :).
Regards.
Greg

Metric collection error for Oracle 10g(10.2.0.4) database.

Hi,
i just confirured OEM11G(11.1.0.1) on my client test machine and installed 11.1.0.1 agent on one target where 10.2.0.4 database is running. OS is windows 2003 R2.
after installing the agent, i am able to see the database name in the oem --> database tab. but its status is "metric collection error" how ever i am able to see the details about datafiles etc..but in the status sheet it is showing as "metric collection error". i checked the dbsnmp user name and pasword. both are working. i tried to reconfigure the databae manually. it is erroring out with the following error.
oracle.sysman.emSDK.emd.comm.CommException: IOException in sending Request :: Connection refused: connect
Can any body help me to take it forward.
REgards
DBA.

I would check the agent trace file (<AGENT_HOME>\sysman\log\emagent.trc) to see if this gives you any information. To give the Log on as batch privilege will not help (to what user?) I think. It will if you start patching using Grid Control.
Are you sure the target db is 10.2.0.4? Because it was a issue in 10.2.0.3 and cursor_sharing=similar
Eric

Metric Collection Errors against Application Server 10.1.3.1

Hi,
I'm getting metric collection errors like below :
Target midtier_2.mn224_HTTP Server
Type Oracle HTTP Server
Metric Resource Usage
Collection Timestamp 06-Dec-2007 14:12:22
Error Type Collection Failure
Message Missing Properties : [version]
I'm running Oracle Enterprise Manager 10g Release 3 Grid Control 10.2.0.3.0.
The version of the midtier Application Server installation is 10.1.3.1.0
Can anyone help me with this ?

Save yourself some heartburn and upgrade to 10.2.0.3...

Re-schedule metric collection in EM Gc 10g

Hi all,
I installed OEM/GD 10gR3 on my Linux box and I configured it to monitor 7 databases.
I configured all the credentials to gather metric information, and every night at around 10.20pm, all the metric collection of the 7 databases start in the same time. As a result, all collection falls into errors:
myrl04db Database Instance Dec 5, 2008 10:52:49 PM PST Target has encountered metric evaluation errors.
prod02db Database Instance Dec 5, 2008 10:36:09 PM PST Target has encountered metric evaluation errors.
dev01db Database Instance Dec 5, 2008 10:31:58 PM PST Target has encountered metric evaluation errors.
totyr32db Database Instance Dec 5, 2008 10:28:54 PM PST Target has encountered metric evaluation errors.
And I have to reconfigure the databases to start collecting/monitoring again. Otherwise, I cannot see/operate the database. So every morning I have to go through the pannel to reconfigure it:
This database is not configured -> Configure Database Instance: Properties -> Next -> Finish
It takes few minutes every day :'(
My OMS machine is pretty slow, and I would like to change these jobs to not run in parallel as it is now (~10.30pm).
The documentation is not very clear on this point. Has somebody already done this ? Where could i find the information ?

Metrics are gathered all the time according to metric and policy settings. Is there a job in the repository scheduled for that time of day? Did you pursue looking at all of the log files to see what was running at that time? More info would be helpful.

Metric Collection Errors

I am using a 10.2 OEM agent to monitor various database versions (8i,9i,10g). I understand that using a 10.2 agent on an 8i database is not supported.... from what I have seen, you must use a 10.1 OEM agent. However, we would like to upgrade our 8i databases and therefore do not want to lower our OEM agent version to accomodate something that will phase out soon. In the meantime, I am getting collection errors. Some I was able to fix since error message had perl line number in it.... I know this is unsupported, but hopefully Oracle could list it as a valid work-around. There are just a few messages left:
Target MYDB
Type Database Instance
Metric Data Base parameter collection, Remote Password File, Remote OS Roles and Authentication, DB Password Setting
Collection Timestamp May 18, 2007 6:02:57 AM
Error Type Collection Failure
Message ORA-00900: invalid SQL statement
This was really 4 different metric error messages. Does anyone have suggestions of how to clear these error messages? I am fine with not collecting this info for our v8 databases. I was wondering if I could delete from sysman.MGMT_CURRENT_METRIC_ERRORS?
Or if someone knows how to fix these last few errors, that would be even better.
Thanks.

No, all oracle8 dbs are at 8.1.7.4 (none at lower version).
References:
Metalink: WRONG SQL STATEMENTS IN ESAPRIVREPORTS.PL FOR 8.1.7.4 DATABASES (bug# 6130510)
Forum: Metric Collection Errors
Metalink: METRIC COLLECTION ERRORS AGAINST 8.1.7.4 DATABASES MONITORED BY GRID CONTROL (bug# 5921130)
Steps I have taken:
1. Used Note:373394.1 to grant appropriate privs
2. modified perl scripts until collection errors were resolved.
a) Ran the following statements on Oracle 8.1.7.4 database:
alter system set "_new_connect_by_enabled" = TRUE;
grant select on sysauth$ to dbsnmp;
3. have a handful (5 or 6) of errors left with no perl filenames, line numbers, etc. I would like to figure out how to either suppress these or resolve them so that I don't have to manually filter through metric errors trying to determine which are valid and which are not.
Thanks.

Exlucde mount point from host metric collection

Customer is using 10.2.0.3 GC, Can a mount point on a host be excluded from metric collection? If so how? Is it possible to specify multiple mount point to exclude from metric collection.

I have seen documentation that says to set the warning and critical thresholds to null. You can give that a try but it isn't working for me. Only difference is I am trying to exclude an UNDO TS.

SCCM Report for Applicable and Installed Updates Collection Wise

Hi All, I was looking for a report on Applicable and Installed Updates Collection Wise and got this below query on the Internet and want to create a SCCM report with this below query. How to make this query working in SCCM report?
Do I need to add prompts, if yes please guide me on adding prompts.
SELECT
DISTINCT
SYS.Name0
AS [Server Name], SIS.SMS_Installed_Sites0 AS [Site Code], UCS.Status AS [Patch Status Code],
CASE WHEN UCS.Status = '2' THEN 'Applicable' WHEN UCS.Status = '3' THEN 'Installed' ELSE '' END AS 'Patch Status', UI.BulletinID AS [Bulletin ID],
UI
.ArticleID AS [Article ID], UI.
Title
FROM
v_R_System AS SYS LEFT OUTER
JOIN
v_Update_ComplianceStatusAll
AS UCS ON SYS.ResourceID = UCS.ResourceID INNER
JOIN
v_UpdateInfo
AS UI ON UCS.CI_ID = UI.CI_ID INNER
JOIN
v_RA_System_SMSInstalledSites
AS SIS ON SYS.ResourceID = SIS.
ResourceID
WHERE
(UCS.Status IN ('2', '3')) AND (UI.ArticleID IN ('972270', '974392', '973904', '969947')) AND (SYS.Name0
IN
(SELECT DISTINCT v_FullCollectionMembership.
Name
FROM v_FullCollectionMembership INNER
JOIN
v_R_System
ON v_R_System.ResourceID = v_FullCollectionMembership.ResourceID AND v_R_System.Active0 = 1 AND
v_FullCollectionMembership
.CollectionID IN ('Collection ID'
ORDER
BY
[Patch Status Code]

Yes it can be done and please run the query which i have shared in the thread
I again pasted the query for you below..
SELECT DISTINCT
SYS.Name0 AS [Server Name], CASE WHEN UCS.Status = '2' THEN 'Applicable' WHEN UCS.Status = '3' THEN 'Installed' ELSE '' END AS 'Patch Status',
UI.BulletinID AS [Bulletin ID], UI.ArticleID AS [Article ID], UI.Title
FROM         v_R_System AS SYS LEFT OUTER JOIN
                      v_Update_ComplianceStatusAll
AS UCS ON SYS.ResourceID = UCS.ResourceID INNER JOIN
                      v_UpdateInfo AS UI ON UCS.CI_ID
= UI.CI_ID
WHERE     (UCS.Status IN ('2', '3')) AND (SYS.Name0 IN (SELECT DISTINCT v_FullCollectionMembership.Name
FROM v_FullCollectionMembership INNER JOIN
     v_R_System ON v_R_System.ResourceID = v_FullCollectionMembership.ResourceID AND v_R_System.Active0 = 1 AND
                                                   v_FullCollectionMembership.CollectionID
IN ('XXX00000')))
Kamala kannan.c| Please remember to click “Mark as Answer” or Vote as Helpful if its helpful for you. |Disclaimer: This posting is provided with no warranties and confers no rights

Help.......I moved my LR5 catalog to a new hard drive and lost my COLLECTIONS

I moved my LR5 catalog to a new hard drive and lost my COLLECTIONS. In the collections i get the messageI then locate the file in the new drive :
i locate the file and receive this message
How can i get the Collection to redirect to the new location?? I have about a LOT of missing pics in Collections.
Thank you! Jamie

Thank your for responding.......
To clarify....I moved LIGHTROOM to a new hard drive....including 1) Working catalogs, 2) Working exports, and 3) Working Originals. I now know i did not follow correct procedure for "moving a catalog". I dragged it to the new hard drive. Yikes!!
(I was at Imaging last week and spoke to Julianne Kost, she recommended that i use the FIND link....but this gave me the same result as i am speaking about above.)
To Clarify......The Collections are listed. The target path to the images did not change when i moved to the new hard drive.
There is an exclamation point in the right hand corner of the images in each collection. When i click on the exclamation mark i get the message....."“JK_120214_7782.NEF” could not be used because the original file could not be found. Would you like to locate it?" I then locate the file IN THE NEW current DRIVE...at which time i click on it and i receive the message.....
this file is associated with another photo in the catalog.... each file can only be associated with one photo. Then if i choose to show in library....it points to the image in the FOLDER tab...which is in fact where the image is located.
Up to this point, when i need one of these older collections i have had to recreate. i have manually gone to the original.....in the FOLDER tab, found the image and added to the Collections again. Then i go back and delete all the files with the ! ......a long and tedious task. I was hoping there was an easier way to recreate my "collections".
Initially i was going to just MOVE the entire library again ( the correct way) ....which i should've done i believe. Now i have imported more jobs and have created additional collections , so i'd love to find a short cut!
I hope this is a bit more clear!!
Thank you.

How to set security group as primary site collection admin and secondary site collection admin using powershell in sharepoint online site - office 365?

How to set security group as primary site collection admin and secondary site collection admin using powershell in sharepoint online site - office 365?

Hi,
According to your description, my understanding is that you want to set security group as admin of primary and secondary site collection using PowerShell command in office 365.
I suggest you can use the command below to set the group to site owner, then it will have the site collection admin permission.
Set-SPOSite -Identity https://contoso.sharepoint.com/sites/site1 -Owner [email protected] -NoWait
Here are some detailed articles for your reference:
https://technet.microsoft.com/en-us/library/fp161394(v=office.15)
http://blogs.realdolmen.com/experts/2013/08/16/managing-sharepoint-online-with-powershell/
Thanks
Best Regards
Jerry Guo
TechNet Community Support

Microsoft SQL Server Metric Collection Errors

Hi
I've installed the Microsoft SQL Server plugin.
I've added a SQL server for monitoring.
It only monitors / picks up Cache Hit Ratio.
Then i'm getting the following Metric Collection Errors:
Database Oct 31, 2006 2:35:45 PM Collection Failure Missing Properties : [pro...
[b]SQL Server Process Oct 31, 2006 2:35:45 PM Collection Failure Missing Properties : [pro...
[b]Processor Oct 31, 2006 2:35:45 PM Collection Failure /u/oracle10/OracleHomes/a...
Error Log Entry Oct 31, 2006 2:31:32 PM Collection Failure Missing Properties : [pro...
[b]MSSQL DatabaseFile Oct 31, 2006 2:31:32 PM Collection Failure Missing Properties : [pro...
[b]SQL Server Role Oct 31, 2006 2:31:32 PM Collection Failure Missing Properties : [pro...
[b]MSSQL Transaction Log Oct 31, 2006 2:31:32 PM Collection Failure Missing Properties : [pro...
[b]Database Parameter Oct 31, 2006 2:29:10 PM Collection Failure Missing Properties : [pro...
User Oct 31, 2006 2:29:10 PM Collection Failure Missing Properties : [pro...
[b]Integrated Security Setting Oct 31, 2006 2:29:10 PM Collection Failure Missing Properties : [pro...
[b]MSSQL FileGroup Oct 31, 2006 2:27:10 PM Collection Failure Missing Properties : [pro...
Login Oct 31, 2006 2:25:14 PM Collection Failure Missing Properties : [pro...
[b]Registry Setting Oct 31, 2006 2:24:21 PM Collection Failure Missing Properties : [pro...
[b]SQL Server Oct 31, 2006 2:24:21 PM Collection Failure Missing Properties : [pro...
[b]Database Setting Oct 31, 2006 2:24:21 PM Collection Failure Missing Properties : [pro...
Target <servername>.local
Type Microsoft SQL Server
Metric Database
Collection Timestamp Oct 31, 2006 2:35:45 PM
Error Type Collection Failure
Message [b]Missing Properties : [provided_host_os]
Thnx,
Kenneth

Not sure if you got the plug-in working. If not, read on...
The error is due to failure in internal computation of the SQL Server Host related information.
Ensure that
1. All pre-requisites (specified in SQL Server plug-in Installation Guide) are satisfied
2. Provided property values for discovery of the SQL Server target are correct
- JDBC URL has correct port number
- If you are using older version of SQL Server plug-in, the name of SQL Server
instance that you provided is correct

Authoring and Publishing site collection in SharePoint Online

Hi ,
Can we have multiple authoring and publishing site collection in SharePoint Online?
Thanks, Kaviya (Please remember to click “Mark as Answer” on the post that helps you)

Yes you can use SharePoint 2013 cross-site publishing feature in SharePoint Online to support 1:1 and 1:n set up of authoring : publishing site-collections in SharePoint Online. The catch is that it all needs to be within same tenant.
http://technet.microsoft.com/en-us/library/jj635883(v=office.15).aspx
http://blogs.msdn.com/b/richard_dizeregas_blog/archive/2013/04/01/cross-site-publishing-alternatives-in-sharepoint-online-office-365.aspx
Please mark the replies as answers if they help or unmark if not.

Both CS4 and CS5 Master Collections installed. Uninstall CS4?

I have both Adobe CS4 Master Collection and CS5 Master Collection installed on my mac OS X 10.6.6.
What is the proper uninstall procedure for my entire CS4 collection and do I have to take precautions so it does not interfere with my CS5 installation?

It's a company laptop and that is not an option. On my own computer, that would be my first choice.
My space is tight partly b/c of multiple virtual machines I have. I need to free up some space, simply put.
No other suggestion?

Having trouble Deactivating CS4 and CS5 Master Collection

I had the CS4 and CS5 Master Collection installed on my Macbook Pro and Mac Pro. I have recently reinstalled the OS and did not deactivate the software before I did this. How do I go about doing this so I can reinstall the software? The software serial number thinks that I already have the software installed because it has not been deactivated but I am just trying to reinstall it on the same computers since I wiped the hard drives.
Thank you!

If you're having problems reactivating your software, and have no way of deactivating its previous installation(s), then the only way to do it is to contact Adobe cust service / tech support, who with luck can work on it from their end.

+ASM1 and +ASM2 Metric Collection ERRO

Similar Messages

Maybe you are looking for