ASMA question.
Hi,
I am working on a simple File to File interface without design objects i.e. tunneling interface. The intension of the scenario is to pick up a file from source and put it in the target directory. My question is do we have to use Adapter specific Message Attributes in the Sender and Receiver communication channel.
As per my understanding these ASMA is used when you want file name, directory name and soon from the source and do some manipulation and send the file name to target system.
Can some clear me the question please?
Thanks in advance.
Azias
Hi Azias,
No v dont need to use ASMA for simple picking and posting of a file. Your understandjing s correct. ASMA is used when you need some of the adapter specific attributes such as file name, Directory path etc. Then only do v need to select the option in the communication channel.
Thanks and Regards,
Sanjeev.
Similar Messages
-
Access to ASMA FileName in a own module in a scenario without IR
Hi experts,
I have a scenario with only ID (no IR) in which I get a PDF file from file system and put it on a SFTP server with a SFTP module created for this reason.
So scenario has a sender CC for polling and a receiver CC with module SFTP for putting the file.
Obviously filename placed in SFTP server must be the same of filename get from file system (in fact is the same file), so I have flagged ASMA FileName parameter.
My problem is that I must pass ASMA FileName to my module.
My question is:
Is possible to read the value of ASMA FileName in my own SFTP module? or to pass it like a variable?
Thanks
Fabiodo go thru this - how to access Adapter Specific Message Attribute in my own adapter module
you can indeed access ASMA in the module - /people/daniel.graversen/blog/2006/10/05/dynamic-configuration-in-adapter-modules -
Questions Working with Mail receiver Adapter..!!
Hi,
Mail adapter connection is working now when I downloaded the xsd and executed in the mapping as described in the blog.
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
Connection is working fine now, but im getting the below payload.
<?xml version="1.0" encoding="UTF-8" ?>
- <ns1:Mail xmlns:ns1="http://sap.com/xi/XI/Mail/30">
<Subject>TESTING</Subject>
<From>deepthi at testing.com</From>
<To>deepthi at testing.com</To>
<Content>Testing purpose</Content>
</ns1:Mail>
The question is how to get my actual message which looks like below. this is the Idoc to file map and the resultant output file looks like below
<?xml version="1.0" encoding="UTF-8"?>
<ns0:order xmlns:ns0="http://testing/xi/OrderProcessing">
<document_type>ZU</document_type>
<vendor_number>200000</vendor_number>
<vendor_email_address/>
<vendor_address_line_1>XXXXXX</vendor_address_line_1>
<vendor_address_line_2>XXXXXXXXX</vendor_address_line_2>
<vendor_address_line_3>123242343244566</vendor_address_line_3>
<vendor_address_line_4>US</vendor_address_line_4>
<delivery_address_line_1>1433</delivery_address_line_1>
<delivery_address_line_2>test</delivery_address_line_2>
</ns0:order>
How to send this file as email attachment using mail adapter. Do I need to use 2 maps?
looks like Mail adapter is working only when we use the xsd which is given above and by providing the required details.
Kindly help me if anyone worked on mail adapters.
Thanks
Deepthi,Hi,
Always ASMA overides the Basic Config.
Now in mapping create a Udf and set the value of THeaderSUBJECT as u want... the subject line will change accordingly..
Now to change the name of file dynamaically we have 2 ways as per my knowlwdge...
1. Go for Java mapping and in the mapping u set the file name dynamically.
Please go through /people/stefan.grube/blog/2007/04/17/xi-mail-adapter-an-approach-for-sending-emails-with-attachment-with-help-of-java-mapping
2. Using an adapter module. (Of course a small code required here, but if you are developing adapter module first time.. try to avoid it)
I guess Java mapping is best option...
Babu -
Target Directory & File Name parameters in Receiver File Adapter with ASMA
Hi Experts..
I have the following question....
What am I suppose to inform in the Target Directory & File Name obligatory parameters in Receiver File Adapter if I am using ASMA to fill it? Is it any dummy value?
Also, if you have any step by step guide/blog to forward on how to use ASMA in file adapter I will be greatful.
Thanks in advance,
DanielaYou can give any dummy value in dir and file name... Just go through these blogs
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
/people/madanmohan.agrawal/blog/2009/05/20/combining-three-different-aspects-of-pi-asma-af-module-and-variable-substitution-in-one-shot -
Modify the ASMA without defining the Sender and Receiver Interface
Hi All,
I am developing a scenario where I am picking files from NFS and putting in FTP.
For this I am using only the ID and no IR content.
So far so good.
But Now we have a requirement to dynamically extract the target folder names from the File name.
e.g
Sourc File: ABC_FN_PQR
Folder name shouild be FN
For this the solution would be UDF.
But now my question is that where do i put this UDF as there is no IR at all.
Please suggest.
regards,
PiyushHi,
Just ASMA setting will do the needful. Are you planning to rename your target file name. If yes then only you will require UDF.
Update: Since your directory name will be taken from source file name then you have to use mapping for this, else it will not be possible.
I don't know if creating a new module for this will help you solve the issue, but in that case rather creating adapter module, mapping will be easier.
Regards,
Sarvesh
Edited by: Sarvesh Singh on Dec 7, 2009 3:04 PM -
Questions on Print Quote report
Hi,
I'm fairly new to Oracle Quoting and trying to get familiar with it. I have a few questions and would appreciate if anyone answers them
1) We have a requirement to customize the Print Quote report. I searched these forums and found that this report can be defined either as a XML Publisher report or an Oracle Reports report depending on a profile option. Can you please let me know what the name of the profile option is?
2) When I select the 'Print Quote' option from the Actions drop down in the quoting page and click Submit I get the report printed and see the following URL in my browser.
http://<host>:<port>/dev60cgi/rwcgi60?PROJ03_APPS+report=/proj3/app/appltop/aso/11.5.0/reports/US/ASOPQTEL.rdf+DESTYPE=CACHE+P_TCK_ID=23731428+P_EXECUTABLE=N+P_SHOW_CHARGES=N+P_SHOW_CATG_TOT=N+P_SHOW_PRICE_ADJ=Y+P_SESSION_ID=c-RAuP8LOvdnv30grRzKqUQs:S+P_SHOW_HDR_ATTACH=N+P_SHOW_LINE_ATTACH=N+P_SHOW_HDR_SALESUPP=N+P_SHOW_LN_SALESUPP=N+TOLERANCE=0+DESFORMAT=RTF+DESNAME=Quote.rtf
Does it mean that the profile in our case is set to call the rdf since it has reference to ASOPQTEL.rdf in the above url?
3) When you click on submit button do we have something like this in the jsp code: On click call ASOPQTEL.rdf. Is the report called using a concurrent program? I want to know how the report is getting invoked?
4) If we want to customize the jsp pages can you please let me know the steps involved in making the customizations and testing them.
Thanks and Appreciate your patience
-PC1) We have a requirement to customize the Print Quote report. I searched these forums and found that this report can be defined either as a XML Publisher report or an Oracle Reports report depending on a profile option. Can you please let me know what the name of the profile option is?
I think I posted it in one of the threads2) When I select the 'Print Quote' option from the Actions drop down in the quoting page and click Submit I get the report printed and see the following URL in my browser.
http://<host>:<port>/dev60cgi/rwcgi60?PROJ03_APPS+report=/proj3/app/appltop/aso/11.5.0/reports/US/ASOPQTEL.rdf+DESTYPE=CACHE+P_TCK_ID=23731428+P_EXECUTABLE=N+P_SHOW_CHARGES=N+P_SHOW_CATG_TOT=N+P_SHOW_PRICE_ADJ=Y+P_SESSION_ID=c-RAuP8LOvdnv30grRzKqUQs:S+P_SHOW_HDR_ATTACH=N+P_SHOW_LINE_ATTACH=N+P_SHOW_HDR_SALESUPP=N+P_SHOW_LN_SALESUPP=N+TOLERANCE=0+DESFORMAT=RTF+DESNAME=Quote.rtf
Does it mean that the profile in our case is set to call the rdf since it has reference to ASOPQTEL.rdf in the above url?
Yes, your understanding is correct.3) When you click on submit button do we have something like this in the jsp code: On click call ASOPQTEL.rdf. Is the report called using a concurrent program? I want to know how the report is getting invoked?
No, there is no conc program getting called, you can directly call a report in a browser window, Oracle reports server will execute the report and send the HTTP response to the browser.4) If we want to customize the jsp pages can you please let me know the steps involved in making the customizations and testing them.
This is detailed in many threads.Thanks
Tapash -
Satellite P300D-10v - Question about warranty
HI EVERYBODY
I have these overheating problems with my laptop Satellite P300D-10v.
I did everything I could do to fix it without any success..
I get the latest update of the bios from Toshiba. I cleaned my lap with compressed air first and then disassembled it all and cleaned it better.(it was really clean insight though...)
BUT unfortunately the problem still exists...
So i made a research on the internet and I found out that most of Toshiba owners have the same exactly problem with their laptop.
Well i guess this is a Toshiba bug for many years now.
Its a really nice lap, cool sound (the best in laptop ever) BUT......
So I wanted to make a question. As i am still under warranty, can i return this laptop and get my money back or change it with a different one????
If any body knows PLS let me know.
chears
Thanks in advanceHi
I have already found you other threads.
Regarding the warranty question;
If there is something wrong with the hardware then the ASP in your country should be able to help you.
The warranty should cover every reparation or replacement.
But I read that you have disasembled the laptop at your own hand... hmmm if you have disasembled the notebook then your warrany is not valid anymore :(
I think this should be clear for you that you can lose the warrany if you disasemble the laptop!
By the way: you have to speak with the notebook dealer where you have purchased this notebook if you want to return the notebook
The Toshiba ASP can repair and fix the notebook but you will not get money from ASP.
Greets -
Question regarding NULL and forms
Hi all, i have a survey that im working on that will be sent via email.
I'm having an issue though. if i have a multiple choice question, and the user only selects one of the choices, all the unselected choices return as NULL. is there a way i can filter out anytihng that says "NULL" so it only shows the selected options?
thanks.
here is the page that retrieves all the data. thanks
<body>
<p>1) Is this your first visit to xxxxxxx? <b><%=request.getParameter("stepone") %></b>
</p>
<p> </p>
<p>2) How did You Learn About xxxxxxx?</p>
<p><b><%=request.getParameter("steptwoOne") %></b>
<br>
<b><%=request.getParameter("steptwoTwo") %></b>
<br>
<b><%=request.getParameter("steptwoThree") %></b>
<br>
<b><%=request.getParameter("steptwoFour") %></b>
<br>
<b><%=request.getParameter("steptwoOther") %></b>
</p>
<p> </p>
<p>3) What was your main reason for visiting xxxxx?</p>
<p><b><%=request.getParameter("stepthreeOne") %></b>
<br>
<b><%=request.getParameter("stepthreeTwo") %></b>
<br>
<b><%=request.getParameter("stepthreeThree") %></b>
<br>
<b><%=request.getParameter("stepthreeFour") %></b>
<br>
<b><%=request.getParameter("stepthreeOther") %></b>
</p>
<p>4) did you find the information you were looking for on this site?</p>
<p><b><%=request.getParameter("stepfour") %>
<br>
<b><%=request.getParameter("stepfourOther") %></b>
</b></p>
<p>5) Do you plan on using this website in the future?</p>
<p><b><%=request.getParameter("stepfive") %></b></p>
<p>6) What is your gender</p>
<p><b><%=request.getParameter("stepsix") %></b></p>
<p>7) What is your age group</p>
<p><b><%=request.getParameter("stepseven") %></b></p>
8) Would you like to take a moment and tell us how we can improve your experience on xxxxxxxxxx?
<p><b><%=request.getParameter("stepeightFeedback") %></b></p>i was messing around and came up with this. it doesnt remove the null, but if it is null it adds ABC beside it. so i think i might be getting close. i just need to figure out how to replace the null.
code]
<b><%=request.getParameter("steptwoFour") %></b>
<% if (request.getParameter("steptwoFour") == null ) {
%>
<% out.print("abc"); %>
<% }
%> -
How do I remove Overdrive books from the library that were downloaded onto my computer then transferred to my iphone? The problem is that they do not show up in iTunes.
I see this question asked a lot when I google, but they always give answers that assumes you can find the books in iTunes either under the books tab, or the audio books tab or in the music. They do not show up anywhere for me. They do not remove from the app like the ones I downloaded directly onto my iphone.the related archived article does not answer it either. I even asked a guy working at an apple store and he could not help either. Anybody...?
Thanks!there is an app called daisydisk on mac app store which will help you see exactly where the memory is focused and consumed try using that app and see which folders are using more memory
-
Hello, i have a basic question. if i have defined 2 fields in a cube or a dso:
Name Quantity
and from the external flat file i get some characters for my quantity field. would my load fail? for standard dso and for write optimized?
NOTE: quantity field is a keyfigure defined as numeric.
and the load coming in has "VIKPATEL" for Quantity field and not numbers.
thanksHi Vik,
Yes, the load will fail.
May be you coud first load this data into BW (into PSA) and set both fields as characters fields. Then you can create DSO, do transformation from this PSA to the DSO, and put your logic as to what do you want to do with those Quantity that is not number (e.g. convert to 0, or 'Not assgined', etc).
You can use transfer rule, or a clean up ABAP code in the start routine.
Hope this helps. -
Mid 2010 15" i5 Battery Calibration Questions
Hi, I have a mid 2010 15" MacBook Pro 2.4GHz i5.
Question 1: I didn't calibrate my battery when I first got my MacBook Pro (it didn't say in the manual that I had to). I've had it for about a month and am doing a calibration today, is that okay? I hope I haven't damaged my battery? The calibration is only to help the battery meter provide an accurate reading of how much life it has remaining, right?
Question 2: After reading Apple's calibration guide, I decided to set the MacBook Pro to never go to sleep (in Energy Saver System Preference) and leave it on overnight so it would run out of power and go to sleep, then I'd leave it in that state for at least 5 hours before charging it. When I woke up, the light on the front wasn't illuminated. It usually pulsates when in Sleep. Expectedly, it wouldn't wake when pressing buttons on the keyboard. So, what's happened? Is this Safe Sleep? I didn't see any "Your Mac is on reserve battery and will shut down" dialogues or anything similar, as I was asleep! I've left it in this state while I'm at work and will charge it this afternoon. Was my described method okay for calibration or should I have done something different?
Question 3: Does it matter how quickly you drain your battery when doing a calibration? i.e is it okay to drain it quickly (by running HD video, Photo Booth with effects etc) or slowly (by leaving it idle or running light apps)?
Thanks.
Message was edited by: Fresh JFresh J:
A1. You're fine calibrating the battery now. You might have gotten more accurate readings during the first month if you'd done it sooner, but no harm has been done.
A2. Your machine has NOT shut down; it has done exactly what it was supposed to do. When the power became critically low, it first wrote the contents of RAM to the hard drive, then went to sleep. When the battery was completely drained some time later, the MBP went into hibernation and the slepp light stopped pulsing and turned off. In that state the machine was using no power at all, but the contents of your RAM were still saved. Once the AC adapter was connected, a press of the power button would cause those contents to be reloaded, and the machine would pick up again exactly where you left off. It is not necessary to wait for the battery to be fully charged before using the machine on AC power, but do leave the AC adapter connected for at least two hours after the battery is fully charged. Nothing that you say you've done was wrong, and nothing that you say has happened was wrong.
A3. No, it does not matter. -
Jabber/WebEx Connect SSO Questions
I've got a few questions around exactly what needs to be done to get SAML working for our Connect accounts to successfully authenticate from Jabber for Windows, Mac, iPhone, and Android.
We have both a Meeting Center and Connect account under WebEx using Loose Coupled Integration. Just this past week I enabled SAML for our Meeting Center accounts which went off without a hitch with the exception of Meeting Center integration with Jabber, which is now broken with a message about SSO enabled Meeting Sites not being supported (I think this would maybe be fixed if we had Tight Coupled Integration with our two account?).
Anyway, my questions are...
For Windows, I understand all clients will need to be reinstalled with the MSI argument for the SSO_ORG_DOMAIN switch I've read about, is that correct? Are there any other switches needed for the reinstall?
How will this work with the Mac and mobile clients? There's obviously no command line options to specify for the installations here, will they just know to kick over to my IdP for authentication once they see an email address that falls under an org with SSO enabled? If so, why does the Windows client need to be completely reinstalled and not just know to find the IdP from the Cloud Connect service like Meeting Center does with the Productivity Tools?
We're just doing this for our Connect Web IM accounts, not attempting any sort of SSO with the phone accounts/UC integration yet.
Any ideas on getting the Meeting Center integration into Jabber working again?I'd suggest posting your question over on the Jabber Pilot forum, as this forum is specific to Jabber Guest questions:
https://supportforums.cisco.com/community/4551/jabber-pilot-support
-jim -
Every time I try to download an app it tells me I need to update my security questions, but once I click to make the questions the box goes white. So I'm not sure how to fix it
The new questions show on your account on http://appleid.apple.com ? If they do then try logging out and back into your account on your phone (assuming that is where you are trying to purchase from) and see if the new questions then show on it.
-
Hi All
The question is pretty simple. I can successfully connect to my ASA 5505 firewall via cisco vpn client 64 bit , i can ping any ip address on the LAN behind ASA but none of the LAN computers can see or ping the IP Address which is assigned to my vpn client from the ASA VPN Pool.
The LAN behind ASA is 192.168.0.0 and the VPN Pool for the cisco vpn client is 192.168.30.0
I would appreciate some help pls
Here is the config:
ASA Version 7.2(4)
hostname ciscoasa
domain-name default.domain.invalid
enable password J7NxNd4NtVydfOsB encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
name 192.168.0.11 EXCHANGE
name x.x.x.x WAN
name 192.168.30.0 VPN_POOL2
interface Vlan1
nameif inside
security-level 100
ip address 192.168.0.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address WAN 255.255.255.252
interface Ethernet0/0
switchport access vlan 2
<--- More --->
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
boot system disk0:/asa724-k8.bin
ftp mode passive
clock timezone EEST 2
clock summer-time EEDT recurring last Sun Mar 3:00 last Sun Oct 4:00
dns server-group DefaultDNS
domain-name default.domain.invalid
object-group protocol TCPUDP
protocol-object udp
protocol-object tcp
access-list nk-acl extended permit tcp any interface outside eq smtp
access-list nk-acl extended permit tcp any interface outside eq https
access-list customerVPN_splitTunnelAcl standard permit 192.168.0.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.0.0 255.255.255.0 VPN_POOL2 255.255.255.0
access-list inside_access_in extended permit ip any any
access-list VPN_NAT extended permit ip VPN_POOL2 255.255.255.0 192.168.0.0 255.255.255.0
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool VPN_POOL2 192.168.30.10-192.168.30.90 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-524.bin
no asdm history enable
arp timeout 14400
global (inside) 10 interface
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
nat (outside) 10 access-list VPN_NAT outside
static (inside,outside) tcp interface smtp EXCHANGE smtp netmask 255.255.255.255
static (inside,outside) tcp interface https EXCHANGE https netmask 255.255.255.255
access-group inside_access_in in interface inside
access-group nk-acl in interface outside
route outside 0.0.0.0 0.0.0.0 x.x.x.x 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
aaa authentication enable console LOCAL
aaa authentication http console LOCAL
aaa authentication serial console LOCAL
aaa authentication ssh console LOCAL
aaa authentication telnet console LOCAL
aaa authorization command LOCAL
http server enable
http 192.168.0.0 255.255.255.0 inside
snmp-server host inside 192.168.0.16 community public
no snmp-server location
no snmp-server contact
snmp-server community public
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map outside_dyn_map 20 set pfs group1
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp nat-traversal 20
telnet 192.168.0.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
dhcp-client client-id interface outside
dhcpd dns 217.27.32.196
dhcpd address 192.168.0.100-192.168.0.200 inside
dhcpd dns 192.168.0.10 interface inside
dhcpd enable inside
group-policy DfltGrpPolicy attributes
banner none
wins-server none
dns-server none
dhcp-network-scope none
vpn-access-hours none
vpn-simultaneous-logins 3
vpn-idle-timeout 30
vpn-session-timeout none
vpn-filter none
vpn-tunnel-protocol IPSec l2tp-ipsec
password-storage disable
ip-comp disable
re-xauth disable
group-lock none
pfs disable
ipsec-udp disable
ipsec-udp-port 10000
split-tunnel-policy tunnelall
split-tunnel-network-list none
default-domain none
split-dns none
intercept-dhcp 255.255.255.255 disable
secure-unit-authentication disable
user-authentication disable
user-authentication-idle-timeout 30
ip-phone-bypass disable
leap-bypass disable
nem disable
backup-servers keep-client-config
msie-proxy server none
msie-proxy method no-modify
msie-proxy except-list none
msie-proxy local-bypass disable
nac disable
nac-sq-period 300
nac-reval-period 36000
nac-default-acl none
address-pools none
smartcard-removal-disconnect enable
client-firewall none
client-access-rule none
webvpn
functions url-entry
html-content-filter none
homepage none
keep-alive-ignore 4
http-comp gzip
filter none
url-list none
customization value DfltCustomization
port-forward none
port-forward-name value Application Access
sso-server none
svc none
svc keep-installer installed
svc keepalive none
svc rekey time none
svc rekey method none
svc dpd-interval client none
svc dpd-interval gateway none
svc compression deflate
group-policy customerVPN internal
group-policy customerVPN attributes
dns-server value 192.168.0.10
vpn-tunnel-protocol IPSec
password-storage enable
split-tunnel-policy tunnelspecified
split-tunnel-network-list value customerVPN_splitTunnelAcl
default-domain value customer.local
username xxx password 8SYsAcRU4s6DpQP1 encrypted privilege 0
username xxx attributes
vpn-group-policy TUNNEL1
username xxx password C6M4Xy7t0VOLU3bS encrypted privilege 0
username xxx attributes
vpn-group-policy PAPAGROUP
username xxx password RU2zcsRqQAwCkglQ encrypted privilege 0
username xxx attributes
vpn-group-policy customerVPN
username xxx password zfP8z5lE6WK/sSjY encrypted privilege 15
tunnel-group customerVPN type ipsec-ra
tunnel-group customerVPN general-attributes
address-pool VPN_POOL2
default-group-policy customerVPN
tunnel-group customerVPN ipsec-attributes
pre-shared-key *
tunnel-group-map default-group DefaultL2LGroup
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
service-policy global_policy global
prompt hostname context
Cryptochecksum:a4dfbb82008f78756fe4c7d029871ec1
: end
ciscoasa#Well lots of new features have been hinted at for ASA 9.2 but I've not seen anything as far as an Engineering Commit or Customer Commit for that feature.
Site-site VPN in multiple context mode was added in 9.0(1) and I have customers have been asking for the remote access features as well.
I will remember to ask about that at Cisco Live next month. -
New to Apple, questions about using Windows, and other things
Hello all,
Today is my first day as an Apple owner. It's funny because I'm also a MCSE, MCSA, and MCP.
I purchased a 24" iMac, 2.8GHz, 4GB RAM, and 1TB Hard Drive.
I want to use Windows on my Mac so that I don't have to keep switching over to my PC. My main reason for using Windows is so that I can continue to enjoy my PC Games... mostly racing and D&D games.
So my question is... how does Windows run on bootcamp? Can I still use all of my USB controllers (like my steering wheels, joysticks, etc?)
I really havent even turned on my iMac... been too amazed at just looking at it for the first day (and also rearranging my home office).
I really just want to know from those of you who have PCs AND Macs, if you still find yourself having to go back to your PC because of incompatibilities or performance issues on the iMac?Using BootCamp, your Windows experience is no different than if running it on a similarly configured PC. If you went with a VM running under Mac OS X (like VMWare or Parallels), there are a number of differences. However, using BootCamp you have a Mac-branded PC.
I'd point out that people have been dual-booting operating systems in this fashion for decades. Windows has no obvious in-built support for doing so, but other operating systems (like Linux, FreeBSD, etc.) have always very clearly and explicitly supported dual-booting (on Macs and regular PCs) from the get go.
Maybe you are looking for
-
Bapi or user-exit to create warning in invoice
Hi, I was askes to create a warning whenever someone pushes delete within an invoice (mir7). The problem is that our users are not aware, that they are really going to delete not only the marked position within the invoice but the whole invoice. I´ve
-
If I buy an Ipad 2 in USA can I use 3G in Mexico?
I want to buy an Ipad 2 WiFi + 3G in California and I have red that the at&t version has a GSM type that works in many countries. Mexico in particular? I think it does but I want to be sure before buying it.
-
MOSS 2007 BOE Web Part is unable to connect to my Local BOE server.
Greetings I have the following items installed but the web part is unable to connect to my BOE. Anyone knows how to resolve this? 1, Business Objects XIR3.1 RTM 2, Business Objects XIR3.1 PIK for Sharepoint 2007 3, MOSS 2007 Another questio
-
Hi Gurus, I am having trouble with some BC datasources in the SRM system . Whenever I try to access the datasources via RSA6 I get the message "Extract structure is not valid" the long text help then tells me : You have tried to test the extraction o
-
Search and Replace on master pages
Is there a way to do Search and Replace on masterpages. Example: There are 30 files in a .book document. On those 20 files the header and footer must change. The header and footer are on the master pages. Can you p. e. change "Haeder1" to "Header1" w