Asmcmd "lsdsk -I" doesn't show disks with non-default asm_diskstring

Hi,
I'm testing Oracle 11.1.0.6 on RHEL5 with ASM. It's working well and I'm trying to use the ASM new features but I have the following problem :
- When ASM instance is running, I can use "lsdsk" and it shows the disks
- When ASM instance is down and if I use lsdsk (i.e lsdsk -I), it doesn't show them
My guess is that it comes from the fact my devices are not in the default asm_diskstring and I had to change it to discover them. Because the instance is down, it cannot discover the disks.
The reason for this guess is that if I create a link in /dev/raw/raw1 to my device, "lsdsk -I" is working as you can see below : ASMCMD> lsdsk -I -k
Total_MB  Name       Failgroup  Path
    1529  DATA_0000  DATA_0000  /dev/raw/raw1
ASMCMD> lsdsk -I -t
Create_Date           Mount_Date            Path
Sep 16 08:14:48 2007  Sep 16 12:26:00 2007  /dev/raw/raw1Do you know if there is a variable I could use to change "lsdsk -I" search pattern from the default to my own ?
Best Regards,
Gregory

"I had installed ASM initially on the same CRS, but due to some error during the installation"
This statement means: I had installed ASM on the clusterware, but due to time synchronization error, it didn't got copied on to the 2nd node, and hence I had to uninstall the ASM software.
But the clusterware is still up and running.
Amit.

Similar Messages

  • HT2589 What if I have an iPhone and its sends/recieves messages with our apple id which is my moms email? How do I fix that so that when I text my friends it doesn't show up with my moms email but my number?

    What if I have an iPhone and its sends/recieves messages with our apple id which is my moms email? How do I fix that so that when I text my friends it doesn't show up with my moms email but my number?

    Hi lfeddrix,
    You can send and receive Messages from the Apple IDs and phone numbers signed in to your iMessage section in the settings of your phone. We have an article that explains a little bit about this, and it can be found here:
    iOS: Using Messages
    http://support.apple.com/kb/ht3529
    This section is the most appropriate for your situation:
    You can change the address that new iMessage conversations are started with in Settings > Messages > Send & Receive > Start new conversations from:. Note that this setting applies only to new conversations. If you would like to change the address from which messages are sent, first change this setting, and then delete the existing conversation and start a new one.
    iMessage responses will be sent from the address the recipient most recently messaged. For example, a friend sends you a message to your Apple ID. Responses in this conversation will be sent from your Apple ID, even if you've selected new conversations to start from your phone number.
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • Configuring IPIB with non-default partition key

    Hello
    I want to put IB HCA port into non-default partition to create separate network on my IB fabric. On IB switch (Voltaire ISR9096) I created network with non-default partition key 0x7ffe and add HCA port to this partition.
    But this IB-VPPA was displayed as unconfigured on Solaris host
    ib::3BA0001004181,ffff,ipib    IB-VPPA      connected    configured   ok
    ib::3BA0001004182,fffe,ipib    IB-VPPA      connected    unconfigured unknown
    ib::3BA0001004182,ffff,ipib    IB-VPPA      connected    configured   okConfiguration of new VPPA with cfgadm was unsuccessful:
    # cfgadm -c configure ib::3BA0001004182,fffe,ipib
    Configure the device: /devices/ib:fabric::3BA0001004182,fffe,ipib
    This operation will suspend activity on the IB device
    Continue (yes/no)? yes
    cfgadm: Hardware specific failure: configure operation failed ap_id: /devices/ib:fabric::3BA0001004182,fffe,ipibI unconfigured VPPA with default partition key (0xffff) on HCA port 0x3BA0001004182 and issued cfgadm for VPPA with pkey 0xfffe again - the same effect.
    I tried this on Solaris 10 8/07 and OpenSolaris b72 with the same result - no success ;)
    Is it possible to configure VPPA with non-default pkey on Solaris ?
    Is it possible to configure more than 1 IPIB VPPA on single HCA port ?
    How to perform these configurations ?
    Thanks in advance.
    Regards,
    Denis

    hi
    I was able to setup the listener to serve both databases using netmgr, thanks. Apparently I was trying to use the wrong tool for this previously.
    Now i'm able to access the EM Database Control and it seems to be working fine though i get the following error message
    Logged in As SYS
    Error
    java.lang.Exception: Number of responses does not match queries
    Database Instance: devel.foo.bar
    Now, i'd like to be able to use EM for administering two separate databases (running on the same host). Do i need to migrate the database control somehow to grid control? How do i do that?
    What about security? I'd like to use SSL and limit connections to selected clients only.
    regards,
    aspa

  • Making a slide-show disk with music self-playable

    I have burned a slideshow disk with music through Keynote. In "Inspector", I made sure that zI selected "self-playable" before recording and saving it. However, when I put the disk in my iMac, the icon appears on my desktop, I click on the icon, a window pops up with the file on it, and I click on the file. Then Keynote opens up with the slideshow showing in "Navigator" and I have to press or select play for the slideshow to play.
    What must I do to have the slideshow play as soon as the disk is loaded or at least when I click on the icon of the disk on my desktop?
    Thanks for your help.
    Vernon

    Place the individual music files into a new iTunes playlist. Choose it (not the individual files) by hitting the OK button.

  • Adobe Reader doesn't show letters with lengthening marks

    Hi,
    Just made a fresh W8.1 and Adobe Reader XI install, now I have some .pdf files that doesn't show these symbols - ē, ī, ū, ģ, ķ, ņ etc. However, in some files it shows them corectly. Where might be the problem here?
    BR,
    padodalu

    Do these PDFs have the appropriate fonts embedded?  If not, maybe you need to install the extended font pack http://www.adobe.com/support/downloads/detail.jsp?ftpID=5508

  • IDVD doesn't show menu with chapters

    DVD goes directly to 'play movie.. No scene selection is displayed. If I press 'menu' on the remote I can see all selections .  How can I get the selection splash screen to display upon insertion?

    Go into the Map mode of iDVD and check to see if there is any item in the far left bin, the Auto Play bin. If so drag it out and and redo the project.  I suggest you follow this workflow:
    Once you have the project as you want it save it as a disk image via the  File ➙ Save as Disk Image  menu option.  This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image and launch DVD Player and play it.  If it plays OK with DVD Player the encoding was good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    OT

  • Newsletter email campaign - Mailling list with non "default" email address

    Hi all.
    We need to implement a newsletter email campaign but, with standard campaign execution, SAP CRM gets the "default" email addressess of BPs.
    We have a malling list of newsletter that contains a list of emails of our Business Partners.
    This mails sholdn't be the standard ones of this BPs. BPs can has many email addressess (more than one) and they can be subscrited with a non default email (email without default flag in SAP CRM).
    When we try to execute a Marketing campaign with these BPs, SAP CRM uses the default mail address to send the campaing.
    Is possible to execute a Mailling campaign setting the email receivers?
    Thanks a lot.

    Hi Mauro.
    We already have tried to use CRM_MKT_ADR_SEARCH Badi. We have implemented CHANGE_SEARCH_RESULTS method but with this it's only possible to choice between diferent Addresses Numbers.
    But, we have the same Addr. Number with more than one email address in ADR6. All this email address are in the same Adrress Number and Person Number.
    About your question, we are storing the newsletter emails into a Z table. This email adresses are already in BP address.
    Thank you for your idea.
    Do you have another way?

  • I have made my entire Macbook Pro desktop larger.  The dock doesn't show along with the tool bar at the same time.  There's no room.  I cannot figure out what I did, so cannot undo this huge screen.  Any suggestions?

    I have made my entire Macbook Pro desktop larger and cannot reduce it back down to the original size.  I cannot view both my dock and toolbar at the same time because of this.  Suggestions?

    Go to the Apple menu >System Preferences > Universal Access and turn off Zoom.

  • My Indesign CC doesn't show any export options, defaults to PDF.

    When I go to export a document, there is no longer a drop-down bar with export options. I can save as a PDF, but not as an IDML or anything else. What am I missing?

    Version of InDesign? Computer platform?
    Try restoring your InDesign preferences:
    Trash, Replace, Reset, or Restore the application Preferences

  • HT1918 When I try to change my payment thing it doesn't come up with "None" I gave no option to change it unless it's another credit card.

    I go to my payment information and I can not change it none. But it will not let me download anything.

    bookyboo100 wrote:
    I go to my payment information and I can not change it none.
    None is not an option in all Countries and/or Regions.
    Suggest you Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • SC3.2/oracle service; adding a 2nd db instance with non default user

    Hi, I have a 3.2 Cluster configuration with oracle 9i working, now I want to add a 2nd instance to the cluster but I need to create a new resource group, because I'm using a different OS user and pass for this database I would like to know if I need to specify the OS user and password for the oracle server resource, so cluster can start the rs with the appropriate user for this new database.
    Filesystems and oracle sfw are in different directories/volumes, os user owns the fs and the db can start outside the cluster without problems, next step is to add everything into the cluster.
    I only found a user_env attribute at the moment of the creation of the resource, but it doesn't look like the option that I need.
    Any help is appreciated.

    Do you mean a separate database (instance) rather than a 2nd instance, which might suggest a RAC deployment?
    If so, when you build the database you will need to follow the same procedure as in the manual. The database will have a monitoring user configured and this information is supplied in the Oracle resource properties. If the database runs from a different Oracle home, then the new Oracle (Solaris) user will be picked up from the uid of the oracle binary.
    Regards,
    Tim
    ---

  • Unresolved bug in adobe reader x with non-default windows zoom level

    This seems to have already been brought up here about a year ago: http://forums.adobe.com/thread/776060.
    I am using Windows 7 Professional 64-bit with Firefox 12.0 and Adobe Reader 10.1.3. Here is a description of the problem:
    Whenever I open any PDF file in a browser (firefox or IE) using the adobe reader I am unable to select text, save the file or interact with the content in any meaningful way because the plugin does not recognise my cursor position. If I click on some text in a PDF document, the reader will immediately highlight a region of text between where I clicked and where it thinks I started clicking from (above 20% of the screen above and to the left of where I actually clicked on the page). If I roll my mouse over the region where the dashboard normally appears, the dash does appear as intended and the cursor changes in response to hover over buttons, as if everything were working, but I am unable to click on anything (clicking does nothing). If I click and hold the dashboard when it appears, it immediately jumps to another region of the page, as if it thinks I moved the mouse (20% up and to the left again). I have recently reformatted and am now using a fresh install, and the issue remains. My desktop zoom level in windows is 150%. The problem appears only inside the browser; viewing PDFs directly in Acrobat Reader X works without issue.
    I can resolve the problem either of two ways:
    a) Reverting back to the default windows zoom level (125%).
    b) right-clicking on the Adobe Reader X icon, navigating to the compatibility tab and clicking "Disable Display Scaling on high DPI settings"
    The workaround is easy but it's disappointing that adobe hasn't fixed this. Please consider that it would mostly affect individuals who are vision impaired and might not have the know-how to resolve the problem or check for solutions online, let alone post comments such as this. As far as I can tell this problem severely impaires the functionality of adobe in any browser on any non-standard zoom windows installation.

    Please be sure to post your issue in the following Feature Request/Bug Report Form.

  • Automated Composite build/test not work with non-default version

    Hello,
    I have a BPEL composite and I am trying to setup maven and soapUI to build, deploy, test, and upon successful test, set it as the default version. The difficulty I am having is testing the composite before it becomes the default version. I am able to hit the endpoint using the full URL with the randomly generated ID in it using soapUI (see below), but not by using the shortened URL.
    Full URL: http://soabpm-vm:8001/soa-infra/services/default/Project1!0.0.12-SNAPSHOT*soa_13954572-b91f-480d-88d2-037e92083d72/bpelprocess1_client_ep
    Shortened URL: http://soabpm-vm:8001/soa-infra/services/default/Project1!0.0.12-SNAPSHOT/bpelprocess1_client_ep
    I tried hitting the shortened URL outside of the maven build, just using soapUI, and the response is empty. However, if I then mark this new version as default (through EM), and then mark a previous version as default (let's say 0.0.11), then the shortened URL for 0.0.12 can be successfully hit.
    It seems to me then that before the shortened URL above can be used, that specific version must have been set as the default version at some point. This would make an automated maven/soapUI test of new version (but not default) quite difficult, as it would have to somehow retrieve the full URL.
    Is this a bug or can it be fixed with a config setting change?
    Here are the steps in the process, maven build (using the Oracle provided ant sca files):
    1. Compile
    2. Package
    3. Deploy, not as default
    4. Test the new version (using soapUI plugin)
    5. If successful tests, mark new version as default
    The problem is with step 4, can't determine what the full URL is and the shortened URL does not work.
    Thanks
    Ben

    I found a similar issue in Oracle's support site, Patch 13774839 (based on bug 13569816). I will try that out and post the results here.

  • Xsd - java : create enumeration file with non default ordinals

    Hi,
    i'd like to create an XSD file which will create a java enumeration file.
    I successed to create the enums in the java file like this :
    RED,
    ORANGE,
    BLUE
    (with default ordinals - 0, 1, 2 ...)
    but i want this to look like :
    RED (1),
    ORANGE (3),
    BLUE (10)
    thanks in advance,
    nati

    I'm not sure that you understand my meaning.
    I want that my XSD file will create automaticlly an enum file (in Java).
    right now, my XSD file looks like that :
    <xsd:simpleType name="colors">
    <xsd:restriction base="xsd:string">
    <xsd:enumeration value="RED"/>
    <xsd:enumeration value="ORANGE"/>
    <xsd:enumeration value="BLUE"/>
    </xsd:restriction>
    </xsd:simpleType>
    and the java file which this XSD creates has the values above with the ordinals : RED - 0, ORANGE - 1, BLUE - 2.
    I'm asking if there is any way to control the ordinals of those values in the XSD file (NOT in the Java file) ?
    Thank you very much....

  • Initializing arrays with non-default values

    Hi,
    I have a large array (300+ elements) and want it to be filled with all -1 at the start and not with 0.
    A couple of (bad) ideas of mine:
    - using an expression "array[0] = -1, array[1] = -1, ..." (a lot of typing work)
    - using a for loop with an expression "array[Locals.k] = -1" (very slow)
    - getting the array from "somewhere else" like e.g. a LabVIEW VI (cumbersome)
    Is there some expression syntax I can use?

    You can use SetElements(Locals.d,-1)  where d is the array.

Maybe you are looking for