ASMM - sga dynamic components and standby
Are SGA dynamic modifications "transferred" from the primary to the standby?
i.e: if __shared_pool is resized in primary will this also trigger standby?
Trying to determine if dynamic pools may somehow end up being different upon switchover/failover or if it's possible that upon switchover standby's dynamic shared_pool size results smaller than that of former primary
Absolutely, yet there are some things DG broker does upon switch over. Was wondering if somehow standby would be "updated" upon switcher...
But then again, it's SGA as a hole may be smaller to begin with...
Were you to tell if the following is true or false:
"After activation standby database may have a SGA configuration different than that of primary"
what would you say?
Hole intention here is to determine whether after a switch over it's possible to start getting ORA-04031 on account of dynamic pools being different
and oracle struggling to re-size them...
Suppose we have a 6Gb SGA... primary has been working full steam for say 2 months and dynamic pools are set by oracle in the following way:
shared_pool...3Gb
cache...3Gb
Now if standby has not acknowledged those dynamic changes, it may be using values of it's own... maybe a larger cache... say
shared_pool...1Gb
cache...5Gb
Now we switch-over and if sga settings are not "synced", then new primary will have 2Gb less of shared pool...
Application kicks in, shared pool runs low... Oracle will have to move 1 or 2Gbs from cache to shared pool, this will cause serious latching and most likely ORA-04031
so is that likely to happen?
Similar Messages
-
Dynamic Structure and Components Issue
Hi,
I have a requirement of creating an inbound idoc program and populating dynamic structures. The program for the dynamic structure creation is as follows: ( I have been referencing Heilmans Blog ): The part for the inbound idoc creation works fine. The data will come in a flat file with Table name and 15 characterstcis. The table name is known at runtime. I need to create the dynamic table, find out the components and then populate the custom table with the dynamically created structures.
Custom table: 4 components
Internal table from file: 15 components with value.
There could be more than one table in the flat file and not all components or char in the flat file is mapped to the table.
I have been able to code the part where the components in the structure and the file components are in the same order. The problem is if the components in the structure and the file components are not in the same order. I would appreciate some inputs in this issue.
The part that has to be worked out is:
IF NOT L_TABNAME IS INITIAL.
perform get_structure.
perform create_dynamic_itab.
perform get_data.
ENDIF.
*& Report /FACTGLB/GTDMI_VARTAB_IDOCS02 *
PROGRAM DESCRIPTION: Variant Table and Content Upload Interface.
DEVELOPER: Aveek Ghose
CREATION DATE: 2008-07-02
RDD NUMBER: DCDD027
TRANSPORT NUMBER(S): RD2K902769
*-- REVISION HISTORY -
DEVELOPER:
DATE APPLIED: YYYY-MM-DD
SCR NUMBER: <Scope Change Request ID>
RDD NUMBER: <Toolset Object ID>
TRANSPORT NUMBER(S):
DESCRIPTION:
REPORT ZGTDMI_VARTAB_IDOCS_DYNAMIC
NO STANDARD PAGE HEADING
LINE-SIZE 150
LINE-COUNT 55
MESSAGE-ID zfactglb.
**Include for Global Data Declaration
*INCLUDE /FACTGLB/GTDMI_VARTAB_TOP02.
**Include for Selection Screen
*INCLUDE /FACTGLB/GTDMI_VARTAB_SEL02.
**Include for Sub Routines
*INCLUDE /FACTGLB/GTDMI_VARTAB_FORMS02.
*& Include /FACTGLB/GTDMI_VARTAB_TOP02 *
*& Include /FACTGLB/GTDMI_VARTAB_TOP02 *
*& Include /FACTGLB/GTDMI_VARTAB_TOP
*& Include /FACTGLB/GTDMI_VARTAB_TOP
PROGRAM DESCRIPTION: Variant Table and Content Upload Interface.
DEVELOPER: Aveek Ghose
CREATION DATE: 2008-07-02
RDD NUMBER: DCDD027
TRANSPORT NUMBER(S): RD2K902769
*-- REVISION HISTORY -
DEVELOPER:
DATE APPLIED: YYYY-MM-DD
SCR NUMBER: <Scope Change Request ID>
RDD NUMBER: <Toolset Object ID>
TRANSPORT NUMBER(S):
DESCRIPTION:
TYPE POOLS
*Type declaration for ALV display
TYPE-POOLS : slis.
Include .
type-pools: col, "#EC *
icon, "#EC *
sym, "#EC *
abap. "#EC *
Target structure definitions
tables:
E1CUVTM, "#EC *
E1DATEM, "#EC *
E1CUV1M, "#EC *
edp21, "#EC *
edi_dc40, "#EC *
edi_dd40, "#EC *
edi_ds40. "#EC *
GLOBAL TYPES
TYPES : BEGIN OF ty_vartab.
include structure E1CUVTM.
TYPES: END OF ty_vartab.
TYPES : BEGIN OF ty_vartabdate.
INCLUDE STRUCTURE E1DATEM.
TYPES : END OF ty_vartabdate.
*Structure for data retreived
TYPES : BEGIN OF ty_vardetails.
INCLUDE STRUCTURE E1CUV1M.
TYPES : END OF ty_vardetails.
*Structure for data retreived from table tabinput.
TYPES : BEGIN OF ty_tabinput,
lines type string,
END OF ty_tabinput.
*Structure for data retreived from Table dsn_input.
TYPES : BEGIN OF ty_dsninput, "#EC *
LINE(101) type c,
END OF ty_dsninput.
*Structure for data retreived from Table dsn_input.
TYPES : BEGIN OF ty_newinput, "#EC *
LINE(101) type c,
flag(1) type c,
END OF ty_newinput.
*Structure for keeping the values of all the custom tables
TYPES : BEGIN OF ty_custom_tabs,
matnr TYPE matnr, "Material Number
werks TYPE werks_d, "Plant
lgort TYPE lgort_d, "Storage Location
qunty TYPE P DECIMALS 2, "Standard Order Quantity
det_loc TYPE CHAR6, "Detail Location
class TYPE CHAR2, "Class
rate TYPE P DECIMALS 2, "Rate
END OF ty_custom_tabs.
*Type declared for the internal table and work area which will store
*fields for error log
TYPES : BEGIN OF ty_error_log,
matnr TYPE matnr, "Material Number
mtart TYPE mtart, "Material Type
sel_data TYPE char10, "No of selectyed data
END OF ty_error_log.
*Structure for keeping the output data
TYPES : BEGIN OF ty_final,
VTNAM(018) type C,
CHAR1(030) type C,
CHAR2(030) type C,
CHAR3(030) type C,
CHAR4(030) type C,
CHAR5(030) type C,
CHAR6(030) type C,
CHAR7(030) type C,
CHAR8(030) type C,
CHAR9(030) type C,
CHAR10(030) type C,
CHAR11(030) type C,
CHAR12(030) type C,
CHAR13(030) type C,
CHAR14(030) type C,
CHAR15(030) type C,
FLAG(001) type C,
END OF ty_final.
TYPES: begin of TY_CONTENTHD,
VTNAM(018) type C,
FLAG(001) type C,
end of TY_CONTENTHD.
TYPES: begin of TY_CONTENT,
VTNAM(018) type C,
CHAR1(030) type C,
CHAR2(030) type C,
CHAR3(030) type C,
CHAR4(030) type C,
CHAR5(030) type C,
CHAR6(030) type C,
CHAR7(030) type C,
CHAR8(030) type C,
CHAR9(030) type C,
CHAR10(030) type C,
CHAR11(030) type C,
CHAR12(030) type C,
CHAR13(030) type C,
CHAR14(030) type C,
CHAR15(030) type C,
FLAG(001) type C,
Z_VARCOND TYPE VARCOND.
TYPES: end of TY_CONTENT.
TYPES: begin of TY_CONTENTTAB,
VTNAM(018) type C,
COMP1(30) TYPE C,
CHAR1(030) type C,
COMP2(30) TYPE C,
CHAR2(030) type C,
COMP3(30) TYPE C,
CHAR3(030) type C,
COMP4(30) TYPE C,
CHAR4(030) type C,
COMP5(30) TYPE C,
CHAR5(030) type C,
COMP6(30) TYPE C,
CHAR6(030) type C,
COMP7(30) TYPE C,
CHAR7(030) type C,
COMP8(30) TYPE C,
CHAR8(030) type C,
COMP9(30) TYPE C,
CHAR9(030) type C,
COMP10(30) TYPE C,
CHAR10(030) type C,
COMP11(30) TYPE C,
CHAR11(030) type C,
COMP12(30) TYPE C,
CHAR12(030) type C,
COMP13(30) TYPE C,
CHAR13(030) type C,
COMP14(30) TYPE C,
CHAR14(030) type C,
COMP15(30) TYPE C,
CHAR15(030) type C,
FLAG(001) type C.
TYPES: end of TY_CONTENTTAB.
TYPES: BEGIN OF TY_E1CUVTM,
MSGFN TYPE MSGFN,
VAR_TAB TYPE APITABL,
STATUS TYPE RCUTBST,
VTGROUP TYPE RCUTBGR,
AUTHSTRUC TYPE RCUTBBE,
AUTHENTRY TYPE RCUFNBI,
FLDELETE TYPE FLLKENZ,
DBTABNAME TYPE TABNAME16,
DBCONACTIVE TYPE DBCON_ACTI,
PRESDEC TYPE VTDCT,
END OF TY_E1CUVTM.
TYPES: BEGIN OF TY_E1CUV1M,
MSGFN TYPE MSGFN,
VTLINENO TYPE VTLINENO,
VTCHARACT TYPE ATNAM,
ATWRT TYPE ATWRT,
ATFLV TYPE ATFLV,
ATAWE TYPE MSEHI,
ATFLB TYPE ATFLB,
ATAW1 TYPE MSEHI,
ATCOD TYPE ATCOD,
ATTLV TYPE ATTLV,
ATTLB TYPE ATTLB,
ATPRZ TYPE ATPRZ,
ATINC TYPE ATINC,
VTLINENO5 TYPE VTLINENO5,
END OF TY_E1CUV1M.
TYPES: BEGIN OF TY_E1DATEM,
MSGFN TYPE MSGFN,
KEY_DATE TYPE SYDATUM,
AENNR TYPE AENNR,
EFFECTIVITY TYPE CC_MTEFF,
END OF TY_E1DATEM.
TYPES: BEGIN OF ty_vtnam,
vtint TYPE vtint, " Internal number of variant table
vtnam TYPE vtnam, " Name of variant table
dbtab_name type tabname16, "Custom table Name
error TYPE char1, " Indicates error in data format
reas TYPE char50, " Reason for failure
END OF ty_vtnam.
Get data type for characteristic
TYPES: BEGIN OF ty_cabn,
atinn TYPE atinn, "Internal characteristic
atnam TYPE atnam, "Characteristic Name
atfor TYPE atfor, "Data type of characteristic
atson TYPE atson, "Indicator: Additional Values
atprt TYPE atprt, "Check table
atprr TYPE atprr, "Name of Check Report Program
atprf TYPE atprf, "Function Module for Checking Values
anzdz TYPE anzdz, "Number of Decimal Places
check TYPE char1, "Indicates check required or not
END OF ty_cabn.
Get field names of variant table
TYPES: BEGIN OF ty_cuvtab_fld,
vtint TYPE vtint, " Internal number of variant table
atinn TYPE atinn, " Internal characteristic
vtpos TYPE vtpos, " Item number of characteristic in variant
*mod-012
DBFLD type NAME_FELD,
*mod-012
exist TYPE char1, " X Indictaes characteristic is part of fil
END OF ty_cuvtab_fld.
Store all data in internal table
TYPES: BEGIN OF ty_file,
vtnam TYPE vtnam,
char1 TYPE atwrt,
char2 TYPE atwrt,
char3 TYPE atwrt,
char4 TYPE atwrt,
char5 TYPE atwrt,
char6 TYPE atwrt,
char7 TYPE atwrt,
char8 TYPE atwrt,
char9 TYPE atwrt,
char10 TYPE atwrt,
char11 TYPE atwrt,
char12 TYPE atwrt,
char13 TYPE atwrt,
char14 TYPE atwrt,
char15 TYPE atwrt,
flag TYPE char1,
error TYPE char50,
END OF ty_file.
To check for duplicates
TYPES: BEGIN OF ty_dupl,
vtnam TYPE vtnam,
char1 TYPE atwrt,
char2 TYPE atwrt,
char3 TYPE atwrt,
char4 TYPE atwrt,
char5 TYPE atwrt,
char6 TYPE atwrt,
char7 TYPE atwrt,
char8 TYPE atwrt,
char9 TYPE atwrt,
char10 TYPE atwrt,
char11 TYPE atwrt,
char12 TYPE atwrt,
char13 TYPE atwrt,
char14 TYPE atwrt,
char15 TYPE atwrt,
slnid TYPE slnid,
END OF ty_dupl.
Get previously loaded characteristic values for internal table (CHAR)
TYPES: BEGIN OF ty_cuvtab_valc,
vtint TYPE vtint, " Internal number of variant table
slnid TYPE slnid, " Key for value combination in variant tab
atinn TYPE atinn, " Internal characteristic
valc TYPE atwrt, " Characteristic Value
END OF ty_cuvtab_valc.
Get previously loaded characteristic values for internal table (NUM)
TYPES: BEGIN OF ty_cuvtab_valn,
vtint TYPE vtint, " Internal number of variant table
slnid TYPE slnid, " Key for value combination in variant tab
atinn TYPE atinn, " Internal characteristic
val_from TYPE atflv, " Internal floating point from
END OF ty_cuvtab_valn.
Store column positions of characteristics
TYPES: BEGIN OF ty_col_pos,
vtint TYPE vtint, " Internal number of variant table
vtnam TYPE vtnam, " Variant table name
atinn TYPE atinn, "Internal characteristic
atnam TYPE atnam, "Characteristic Name
field TYPE fieldname, "Field name
req TYPE char1, " Required or not
vtpos TYPE vtpos, " Item number of characteristics
DBFLD type NAME_FELD, " Field Name of Custom table.
END OF ty_col_pos.
Store valid values for characteristics
TYPES: BEGIN OF ty_cawn,
atinn TYPE atinn, " Internal characteristic
atzhl TYPE atzhl, " Int counter
atwrt TYPE atwrt, " Characteristic Value
atflv TYPE atflv, " Internal floating point from
lkenz TYPE lkenz, " Deletion indicator
END OF ty_cawn.
Store error messages for individual lines
TYPES: BEGIN OF ty_error,
vtnam TYPE vtnam, " Variant table name
fname TYPE fieldname, " Fieldname
atnam TYPE atnam, " Characteristic name
atwrt TYPE atwrt, " Characteristic value
row TYPE char5, " Row id
END OF ty_error.
Begin TPR# 4618
To store unique number for variant
TYPES: BEGIN OF ty_vnt_ma,
vtnam TYPE vtnam,
unique_no TYPE ZGTDM_UNQN,
no_chr TYPE ZGTDM_NO_CHR,
END OF ty_vnt_ma.
TYPES: BEGIN OF ty_dbtab,
vtint TYPE vtint,
vtnam TYPE vtnam,
DBTAB_NAME TYPE TABNAME16,
END OF ty_dbtab.
To find out concatenated number for
TYPES: BEGIN OF ty_split,
f1 TYPE char6,
END OF ty_split.
TYPES: BEGIN OF ty_charval,
char TYPE char30,
END OF ty_charval.
TYPES: BEGIN OF TY_DATA,
name TYPE string,
value(15) type c,
END OF TY_DATA.
DATA: I_DATATAB TYPE STANDARD TABLE OF TY_DATA.
TYPES:
TUMLS_MESSTYPE type /SAPDMC/LS_MESSTYPE,
TUMLS_MESSTYPETXT type EDI_TEXT60,
TUMLS_MESSCODE type EDIPMESCOD.
TYPES:
TUMLS_TABNAME TYPE TABNAME, "#EC *
TUMLS_SEGMENT TYPE TABNAME. "#EC *
TYPES:
TUMLS_PATHFILE TYPE /SAPDMC/LS_FILENAME,
TUMLS_FILENAME TYPE /SAPDMC/LS_FILENAME,
TUMLS_FILETEXT TYPE /SAPDMC/LS_FILETEXT.
TYPES:
BEGIN OF type_errorline,
msgty type SYMSGTY,
id type SYMSGID,
msgno type symsgno,
par1 type symsgv,
par2 type symsgv,
par3 type symsgv,
par4 type symsgv,
END OF type_errorline.
TYPES:
type_errortab TYPE SORTED TABLE
OF type_errorline
WITH NON-UNIQUE KEY id msgno par1 par2 par3 par4.
DATA:
LV_INDEX TYPE SY-INDEX,
LV_INDEX2 TYPE SYINDEX,
LV_TABLE1 TYPE REF TO DATA,
LV_TABLE2 TYPE REF TO DATA,
LV_TABLE3 TYPE REF TO DATA,
LV_TABLE4 TYPE REF TO DATA,
LV_LINE1 TYPE REF TO DATA,
LV_LINE2 TYPE REF TO DATA,
LV_LINE3 TYPE REF TO DATA,
LV_LINE4 TYPE REF TO DATA,
LV_OFFSET1 TYPE SYTABIX,
ST_IS_LAYOUT_ALV TYPE SLIS_LAYOUT_ALV,
L_IT_FCATLOG_ALV TYPE SLIS_T_FIELDCAT_ALV,
L_IT_FLDCAT TYPE LVC_T_FCAT.
GLOBAL INTERNAL TABLES
DATA : i_newinput TYPE STANDARD TABLE OF ty_newinput INITIAL SIZE 0."#EC *
DATA : i_contentheader1 TYPE STANDARD TABLE OF ty_contenthd INITIAL SIZE 0."#EC *
DATA : i_contenttab1 TYPE STANDARD TABLE OF ty_content INITIAL SIZE 0."#EC *
DATA : i_contenttab2 TYPE STANDARD TABLE OF ty_content INITIAL SIZE 0."#EC *
DATA : i_contenttab3 TYPE STANDARD TABLE OF ty_content INITIAL SIZE 0."#EC *
DATA : i_contenttab4 TYPE STANDARD TABLE OF ty_content INITIAL SIZE 0."#EC *
DATA : i_contenttab5 TYPE STANDARD TABLE OF ty_contenttab INITIAL SIZE 0."#EC *
DATA : i_E1CUV1M TYPE STANDARD TABLE OF E1CUV1M INITIAL SIZE 0."#EC *
DATA : i_errortab TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0."#EC *
GLOBAL WORK AREAS
**Internal Table for the structure TY_T001L
DATA : wa_vartab TYPE ty_vartab. "#EC *
DATA : wa_vartabdate TYPE ty_vartabdate. "#EC *
DATA : wa_vardetails TYPE ty_vardetails. "#EC *
DATA : wa_tabinput TYPE ty_tabinput. "#EC *
DATA : wa_dsninput TYPE ty_dsninput. "#EC *
DATA : wa_newinput TYPE ty_newinput. "#EC *
DATA : wa_gnewinput TYPE ty_newinput. "#EC *
DATA : wa_ginput_data TYPE ty_newinput. "#EC *
DATA : wa_final TYPE ty_final. "#EC *
DATA : wa_content TYPE ty_content. "#EC *
DATA : wa_contenthd TYPE ty_contenthd. "#EC *
DATA : wa_contentheader type ty_contenthd. "#EC *
DATA : wa_contenttab TYPE ty_content. "#EC *
DATA : wa_content1 TYPE ty_content. "#EC *
DATA : wa_contenthd1 TYPE ty_contenthd. "#EC *
DATA : wa_contentheader1 type ty_contenthd. "#EC *
DATA : wa_contenttab1 TYPE ty_content. "#EC *
DATA : wa_contenttab2 TYPE ty_content. "#EC *'
DATA : wa_contenttab3 TYPE ty_content. "#EC *
DATA : wa_contenttab4 TYPE ty_content. "#EC *
DATA : wa_contenttab5 TYPE ty_contentTAB. "#EC *
DATA : wa_E1CUVTM TYPE E1CUVTM. "#EC *
DATA : wa_E1CUV1M TYPE E1CUV1M. "#EC *
DATA : wa_E1DATEM TYPE E1DATEM. "#EC *
DATA : wa_error_tab TYPE solisti1. "#EC *
INTERNAL TABLES AND WORK AREAS FOR BDC
*Internal Table to store the data to display the error message
DATA : i_errormsg TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0."#EC *
*Internal Table to store the data to display the error message
DATA : i_error TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0."#EC *
DATA : itab_error TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0."#EC *
**Work area to store the data to display the error message
DATA : wa_errormsg TYPE solisti1. "#EC *
**Internal table which will store data for the error log
DATA:i_error_log TYPE STANDARD TABLE OF ty_error_log INITIAL SIZE 0."#EC *
GLOBAL VARIABLES
DATA: G_FILE TYPE string. "#EC *
DATA : g_ctr_input_recs(5) type c. "#EC *
DATA: g_ctr_output_recs(5) type p. "#EC *
data : g_msg(100) type c. "#EC *
data: g_struct_file TYPE string. "#EC *
data: g_login type FILEINTERN. "#EC *
data: g_phyin type string. "#EC *
DATA: g_lprnt type RSPOPSHORT. "#EC *
DATA: g_FNAME1 TYPE STRING. "#EC *
DATA : g_repid TYPE repid, "#EC *
g_exit(1) TYPE C, "#EC *
gx_variant type disvariant. "#EC *
DATA : g_lines TYPE i . "#EC *
data : g_save(1) type c. "#EC *
DATA : g_splid TYPE rspoid . "#EC *
data: p_login type FILEINTERN. "#EC *
data: p_phyin type string. "#EC *
DATA:
go_table TYPE REF TO cl_salv_table,
go_sdescr TYPE REF TO cl_abap_structdescr,
go_tdescr TYPE REF TO cl_abap_tabledescr,
gdo_data TYPE REF TO data,
gdo_handle TYPE REF TO data,
gs_comp TYPE abap_componentdescr,
gt_components TYPE abap_component_tab.
FIELD-SYMBOLS:
TYPE table.
GLOBAL CONSTANTS
CONSTANTS c_msgar TYPE rslgarea VALUE 'F8'. "#EC *
CONSTANTS c_msgid TYPE rslgsubid VALUE 'E'. "#EC *
CONSTANTS c_urgnc TYPE char04 VALUE 'HIGH'. "#EC *
CONSTANTS C_X(1) TYPE C VALUE 'X'. "#EC *
CONSTANTS C_Y(1) TYPE C VALUE 'Y'. "#EC *
CONSTANTS C_Z(1) TYPE C VALUE 'Z'. "#EC *
CONSTANTS C_E(1) TYPE C VALUE 'E'. "#EC *
CONSTANTS C_SAP(3) TYPE C VALUE 'SAP'. "#EC *
CONSTANTS C_MOD(3) TYPE C VALUE 'MOD'. "#EC *
CONSTANTS C_MD1(3) TYPE C VALUE 'MD1'. "#EC *
CONSTANTS C_MD2(3) TYPE C VALUE 'MD2'. "#EC *
CONSTANTS C_MD3(3) TYPE C VALUE 'MD3'. "#EC *
CONSTANTS C_MD4(3) TYPE C VALUE 'MD4'. "#EC *
CONSTANTS C_MD5(3) TYPE C VALUE 'MD5'. "#EC *
constants: c_000001(6) type c value '000001', "#EC *
c_e1cuv1m(7) type c value 'E1CUV1M', "#EC *
c_02(2) type c value '02', "#EC *
c_009(3) type c value '009', "#EC *
c_0001(4) type c value '0001'. "#EC *
constants: c_e1datem(7) type c value 'E1DATEM'. "#EC *
constants: c_e1cuvtm(7) type c value 'E1CUVTM'. "#EC *
GLOBAL INTERNAL TABLES FOR ALV DISPLAY
*Internal tables for ALV Field cat
DATA :
i_fieldcat_ov TYPE STANDARD TABLE OF slis_fieldcat_alv INITIAL SIZE 0,"#EC *
i_fieldcat_dtl TYPE STANDARD TABLE OF slis_fieldcat_alv INITIAL SIZE 0,"#EC *
i_fieldcat_ov1 TYPE lvc_t_fcat, "#EC *
i_events TYPE slis_t_event. "#EC *
GLOBAL WORK AREAS FOR ALV DISPLAY
*Work area for ALV Field layout
DATA : wa_layout TYPE slis_layout_alv. "#EC *
*Work area for Field Cat. Table
DATA : wa_fieldcat TYPE slis_fieldcat_alv. "#EC *
GLOBAL VARIABLES FOR ALV DISPLAY
DATA : g_event TYPE slis_t_event. "#EC *
DATA : g_top_of_page TYPE slis_t_listheader. "#EC *
DATA : g_ok_code TYPE char4. "#EC *
DATA : g_variant type disvariant. "#EC *
GLOBAL CONSTANTS FOR ALV DISPLAY
BAL handling
data: iv_log_handle type BALLOGHNDL. "#EC *
data: is_log_header type bal_s_log. "#EC *
data: iv_object type bal_s_log-object value 'CAPI'. "#EC *
data: iv_subobject type bal_s_log-subobject value 'CAPI_LOG'."#EC *
data: iv_tcode type bal_s_log-altcode value 'SE38'. "#EC *
*MOD-005
RANGES:
R_MESTYP FOR EDIDC-MESTYP, "#EC *
R_CREDAT FOR EDIDC-CREDAT, "#EC *
R_CRETIM FOR EDIDC-CRETIM, "#EC *
R_SNDPRT FOR EDIDC-SNDPRT, "#EC *
R_SNDPRN FOR EDIDC-SNDPRN. "#EC *
DATA:
L_MESSTYPE TYPE TUMLS_MESSTYPE. "#EC *
*MOD-005
data: p_sndprn TYPE EDI_SNDPRN, "#EC *
p_sndprt TYPE EDI_SNDPRT, "#EC *
p_sndpor TYPE EDI_SNDPOR. "#EC *
data: p_rcvprn TYPE EDI_RCVPRN, "#EC *
p_rcvprt TYPE EDI_RCVPRT, "#EC *
p_rcvpor TYPE EDI_RCVPOR. "#EC *
data:
init_E1CUVTM type E1CUVTM, "#EC *
prev_E1CUVTM type E1CUVTM, "#EC *
init_E1DATEM type E1DATEM, "#EC *
prev_E1DATEM type E1DATEM, "#EC *
init_E1CUV1M type E1CUV1M, "#EC *
prev_E1CUV1M type E1CUV1M. "#EC *
Source structure definitions
data:
begin of LSMW_TAB_CONTENT, "#EC *
VTNAM(018) type C,
CHAR1(030) type C,
CHAR2(030) type C,
CHAR3(030) type C,
CHAR4(030) type C,
CHAR5(030) type C,
CHAR6(030) type C,
CHAR7(030) type C,
CHAR8(030) type C,
CHAR9(030) type C,
CHAR10(030) type C,
CHAR11(030) type C,
CHAR12(030) type C,
CHAR13(030) type C,
CHAR14(030) type C,
CHAR15(030) type C,
FLAG(001) type C,
end of LSMW_TAB_CONTENT.
Counters
data:
g_cnt_VAR_TAB type i, "#EC *
g_cnt_TAB_CONTENT type i. "#EC *
Counter ct_xxxxxxxxxx: number of transferred records
data:
ct_edi_dc40 type i, "#EC *
cs_edi_dc40 type i, "#EC *
ct_E1CUVTM type i, "#EC *
cs_E1CUVTM type i, "#EC *
ct_E1DATEM type i, "#EC *
cs_E1DATEM type i, "#EC *
ct_E1CUV1M type i, "#EC *
cs_E1CUV1M type i. "#EC *
Global data definitions and data declarations
DATA: wa_cabn TYPE ty_cabn,
wa_cawn TYPE ty_cawn,
wa_file TYPE ty_file,
wa_vtnam TYPE ty_vtnam,
wa_cuvtab_fld TYPE ty_cuvtab_fld,
wa_cuvtab_valn TYPE ty_cuvtab_valn,
wa_cuvtab_valc TYPE ty_cuvtab_valc,
wa_col_pos TYPE ty_col_pos,
wa_error TYPE ty_error,
wa_dupl TYPE ty_dupl,
wa_dupl_file TYPE ty_dupl.
DATA: wa_vnt_ma TYPE ty_vnt_ma,
wa_split TYPE ty_split.
DATA: wa_charval TYPE ty_charval. "#EC *
Internal table
DATA: i_cabn TYPE STANDARD TABLE OF ty_cabn, "#EC *
i_cabn_temp TYPE STANDARD TABLE OF ty_cabn, "#EC *
i_cabn_atinn TYPE STANDARD TABLE OF ty_cabn, "#EC *
i_file TYPE STANDARD TABLE OF ty_file, "#EC *
i_file_tmp TYPE STANDARD TABLE OF ty_file, "#EC *
i_vtnam TYPE STANDARD TABLE OF ty_vtnam, "#EC *
i_cuvtab TYPE STANDARD TABLE OF ty_vtnam, "#EC *
i_cuvtab_fld TYPE STANDARD TABLE OF ty_cuvtab_fld, "#EC *
i_cuvtab_valn TYPE STANDARD TABLE OF ty_cuvtab_valn, "#EC *
i_cuvtab_valc TYPE STANDARD TABLE OF ty_cuvtab_valc, "#EC *
i_col_pos TYPE STANDARD TABLE OF ty_col_pos, "#EC *
i_cawn TYPE STANDARD TABLE OF ty_cawn, "#EC *
i_cawn_n TYPE STANDARD TABLE OF ty_cawn, "#EC *
i_cawn_c TYPE STANDARD TABLE OF ty_cawn, "#EC *
i_cawn_i TYPE STANDARD TABLE OF ty_cawn, "#EC *
i_cuv_error TYPE STANDARD TABLE OF ty_vtnam, "#EC *
i_dupl TYPE STANDARD TABLE OF ty_dupl, "#EC *
i_dbtab TYPE STANDARD TABLE OF ty_dbtab. "#EC *
DATA: i_vnt_ma TYPE STANDARD TABLE OF ty_vnt_ma, "#EC *
i_split TYPE STANDARD TABLE OF ty_split. "#EC *
DATA: i_dupl_file TYPE STANDARD TABLE OF ty_dupl. "#EC *
DATA: i_charval TYPE STANDARD TABLE OF ty_charval. "#EC *
Constants
CONSTANTS: c_char TYPE atfor VALUE 'CHAR', "#EC *
c_date TYPE atfor VALUE 'DATE', "#EC *
c_time TYPE atfor VALUE 'TIME', "#EC *
c_varcond TYPE atnam VALUE 'Z_VARCOND'. "#EC *
Field Symbols
FIELD-SYMBOLS: TYPE ANY.
Variables
DATA: g_raw(500) TYPE c, "#EC *
g_invalid TYPE char1, "#EC *
g_error TYPE char1, "#EC *
g_message TYPE char50, "#EC *
g_slnid_c TYPE slnid, "#EC *
g_slnid_n TYPE slnid, "#EC *
g_row TYPE char5. "#EC *
DATA: g_varcond TYPE varcond, "Variant condition "#EC NEEDED
g_split_var TYPE i. "#EC *
Types: begin of ty_charname,
name type atnam,
end of ty_charname.
data: wa_charname type ty_charname, "#EC *
i_charname type standard table of ty_charname. "#EC *
data: cnt_i type i, "#EC *
g_tabix type char10. "#EC *
Types: begin of ty_itab_zedidc40.
include structure edi_dc40.
TYPES: end of ty_itab_zedidc40.
Types: begin of ty_itab_zedidd40.
include structure edi_dd40.
TYPES: end of ty_itab_zedidd40.
DATA: itab_zedidc40 type standard table of
ty_itab_zedidc40 initial size 0. "#EC *
DATA: itab_zedidd40 type standard table of
ty_itab_zedidd40 initial size 0. "#EC *
DATA: wa_itab_zedidc40 type ty_itab_zedidc40.
DATA: wa_itab_zedidd40 type ty_itab_zedidd40.
*MOD-009
data: itab_ze1cuvtm type e1cuvtm, "#EC *
itab_ze1datem type e1datem, "#EC *
itab_ze1cuv1m type e1cuv1m. "#EC *
data: wdocnum(16) type n value 0. "#EC *
data: wsegnum(6) type n value 0. "#EC *
data: witemno(10) type n value 0. "#EC *
data: witemno_new(10) type n value 0. "#EC *
data: witemno_gst(10) type n value 0. "#EC *
data: witemno_qst(10) type n value 0. "#EC *
TYPES: BEGIN OF ty_input_data1, "#EC *
line(560) type c,
flag(1) type c,
END OF ty_input_data1.
DATA: i_input_data type standard table of
ty_input_data1 initial size 0. "with header line.
DATA: i_input_data1 type standard table of
ty_input_data1 initial size 0. "with header line.
DATA: wa_input_data type ty_input_data1. "#EC *
DATA: g_cnt_input_recs type i. "#EC *
DATA: g_flg_error type c. "#EC *
DATA: l_lines type i. "#EC *
DATA: l_lines_varcond type i. "#EC *
DATA: l_lines1 type i. "#EC *
DATA: l_tabix type i. "#EC *
DATA: wa_input_data1 type ty_input_data1. "#EC *
DATA: FILE TYPE STRING.
Fields that are made available to the user:
DATA:
g_cnt_records_read TYPE i, "#EC *
g_cnt_records_transferred TYPE i, "#EC *
g_cnt_transactions_read TYPE i, "#EC *
g_cnt_transactions_transferred TYPE i, "#EC *
g_cnt_idocs_package TYPE i. "#EC *
data: v_log_handle type balloghndl. "#EC *
DATA: gt_curr_edi_dc40 TYPE STANDARD TABLE OF edi_dc40 initial size 0."#EC *
DATA: gt_curr_edi_dd40 TYPE STANDARD TABLE OF edi_dd40 initial size 0."#EC *
DATA: wa_curr_edi_dc40 TYPE edi_dc40. "#EC *
DATA: wa_curr_edi_dd40 TYPE edi_dd40. "#EC *
internal table for error messages during conversion
DATA: g_error_tab TYPE type_errortab, "#EC *
wa_errortab TYPE type_errorline. "#EC *
DATA: g_edidd_segnam type EDI4SEGNAM, "#EC *
g_edidd_hlevel type EDI4HLEVEC. "#EC *
DATA: g_segnum(6) TYPE n.
DATA: g_objecttype(2) type C.
DATA: P_FNAME(128) TYPE C VALUE '/usr/sap/trans/vartabheader'. " MODIF ID MD1 OBLIGATORY.
DATA: P_FNAME1(128) TYPE C VALUE '/usr/sap/trans/vartabcontent'. " MODIF ID MD1 OBLIGATORY.
DATA: alv_fldcat TYPE slis_t_fieldcat_alv,
it_fldcat TYPE lvc_t_fcat.
field-symbols: .
data: dy_table type ref to data,
dy_line type ref to data,
xfc type lvc_s_fcat,
ifc type lvc_t_fcat.
data: l_wa_data TYPE TY_CONTENT,
l_tabname TYPE tabname,
itab_data TYPE standard table of TY_CONTENT.
DATA: l_len_slnid TYPE i, "#EC NEEDED
l_len_varcond TYPE i, "#EC NEEDED
l_temp_slnid TYPE i, "#EC NEEDED
l_temp_slnc TYPE char5, "#EC NEEDED
l_temp_varcond TYPE varcond, "#EC NEEDED
l_sub_var TYPE i, "#EC NEEDED
l_val_split TYPE char10. "#EC NEEDED
DATA: l_invalid. "#EC NEEDED
DECLARATION FOR SELECTION SCREEN
*selection-screen skip 1.
*For all the input field entries
SELECTION-SCREEN BEGIN OF BLOCK bl1 WITH FRAME TITLE text-001.
*Parameter for Input File Name:
PARAMETERS: p_inpt TYPE RLGRAP-FILENAME MODIF ID MOD . " Presentation server File Variant table
PARAMETERS: p_inpt1 TYPE RLGRAP-FILENAME MODIF ID MOD . " Presentation server File variant Content
SELECTION-SCREEN END OF BLOCK bl1.
IDoc creation
selection-screen begin of block idocpars
with frame title text-006.
parameters:
p_trfcpt as checkbox default C_X MODIF ID MD3,
p_packge(5) type n default 1 MODIF ID MD3.
selection-screen end of block idocpars.
SELECTION-SCREEN BEGIN OF BLOCK bl5 WITH FRAME TITLE text-038.
Radio Buttons :
parameters:
rb_idocp RADIOBUTTON GROUP RB3 DEFAULT 'X' USER-COMMAND UCOM MODIF ID MD6,
rb_custt RADIOBUTTON GROUP RB3 MODIF ID MD6.
SELECTION-SCREEN END OF BLOCK bl5.
SELECTION-SCREEN BEGIN OF BLOCK bl3 WITH FRAME TITLE text-032.
Radio Buttons :
parameters:
rb_apsrv RADIOBUTTON GROUP RB1 DEFAULT 'X' USER-COMMAND UCOM MODIF ID MD4,
rb_convt RADIOBUTTON GROUP RB1 MODIF ID MD4,
rb_idoc RADIOBUTTON GROUP RB1 MODIF ID MD4,
rb_proc RADIOBUTTON GROUP RB1 MODIF ID MD4.
SELECTION-SCREEN END OF BLOCK bl3.
SELECTION-SCREEN BEGIN OF BLOCK bl4 WITH FRAME TITLE text-037.
Radio Buttons :
parameters:
rb_appct RADIOBUTTON GROUP RB2 DEFAULT 'X' USER-COMMAND UCOM MODIF ID MD5,
rb_conct RADIOBUTTON GROUP RB2 MODIF ID MD5,
rb_cust RADIOBUTTON GROUP RB2 MODIF ID MD5.
SELECTION-SCREEN END OF BLOCK bl4.
INITIALIZATION
INITIALIZATION.
Check selection-screen entries *
*AT SELECTION-SCREEN.
PERFORM sub_get_physical_file USING p_fpath p_fname.
PERFORM sub_get_physical_file1 USING p_fpath1 p_fname1.
AT SELECTION SCREEN
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fname.
PERFORM sub_get_file. " CHANGING p_fname. "#EC *
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fname1.
PERFORM sub_get_file1. " CHANGING p_fname1. "#EC *
AT SELECTIHi,
I now have a requirement for the following:
Duplicate VARCOND if I Use small letters and capital letters. Sequential number also duplicated.
Here is the code and would appreciate if someone could shed some light on the issue.
*& Report ZVARTABDYNFINAL
PROGRAM DESCRIPTION: Variant Table and Content Upload Interface.
DEVELOPER: Aveek Ghose
CREATION DATE: 2008-08-25
RDD NUMBER: DCDD027
TRANSPORT NUMBER(S): RD2K902769
*-- REVISION HISTORY -
DEVELOPER:
DATE APPLIED: YYYY-MM-DD
SCR NUMBER: <Scope Change Request ID>
RDD NUMBER: <Toolset Object ID>
TRANSPORT NUMBER(S):
DESCRIPTION:
REPORT ZVARTABDYNFINAL NO STANDARD PAGE HEADING
LINE-SIZE 150
LINE-COUNT 55
MESSAGE-ID /factglb/gta_custdev.
*& Include /FACTGLB/GTDMI_VARTAB_TOP02 *
*& Include /FACTGLB/GTDMI_VARTAB_TOP
*& Include /FACTGLB/GTDMI_VARTAB_TOP
PROGRAM DESCRIPTION: Variant Table and Content Upload Interface.
DEVELOPER: Aveek Ghose
CREATION DATE: 2008-08-25
RDD NUMBER: DCDD027
TRANSPORT NUMBER(S): RD2K902769
*-- REVISION HISTORY -
DEVELOPER:
DATE APPLIED: YYYY-MM-DD
SCR NUMBER: <Scope Change Request ID>
RDD NUMBER: <Toolset Object ID>
TRANSPORT NUMBER(S):
DESCRIPTION:
TYPE POOLS
TYPE POOLS
TYPE POOLS
*Type declaration for ALV display
TYPE-POOLS : slis.
Include <icon>.
type-pools: col, "#EC *
icon, "#EC *
sym, "#EC *
abap. "#EC *
Target structure definitions
tables:
E1CUVTM, "#EC *
E1DATEM, "#EC *
E1CUV1M, "#EC *
edp21, "#EC *
edi_dc40, "#EC *
edi_dd40, "#EC *
edi_ds40. "#EC *
GLOBAL TYPES
TYPES : BEGIN OF ty_vartab.
include structure E1CUVTM.
TYPES: END OF ty_vartab.
TYPES : BEGIN OF ty_vartabdate.
INCLUDE STRUCTURE E1DATEM.
TYPES : END OF ty_vartabdate.
*Structure for data retreived
TYPES : BEGIN OF ty_vardetails.
INCLUDE STRUCTURE E1CUV1M.
TYPES : END OF ty_vardetails.
*Structure for data retreived from table tabinput.
TYPES : BEGIN OF ty_tabinput,
lines type string,
END OF ty_tabinput.
*Structure for data retreived from Table dsn_input.
TYPES : BEGIN OF ty_dsninput, "#EC *
LINE(101) type c,
END OF ty_dsninput.
*Structure for data retreived from Table dsn_input.
TYPES : BEGIN OF ty_newinput, "#EC *
LINE(101) type c,
flag(1) type c,
END OF ty_newinput.
*Structure for keeping the values of all the custom tables
TYPES : BEGIN OF ty_custom_tabs,
matnr TYPE matnr, "Material Number
werks TYPE werks_d, "Plant
lgort TYPE lgort_d, "Storage Location
qunty TYPE P DECIMALS 2, "Standard Order Quantity
det_loc TYPE CHAR6, "Detail Location
class TYPE CHAR2, "Class
rate TYPE P DECIMALS 2, "Rate
END OF ty_custom_tabs.
*Type declared for the internal table and work area which will store
*fields for error log
TYPES : BEGIN OF ty_error_log,
matnr TYPE matnr, "Material Number
mtart TYPE mtart, "Material Type
sel_data TYPE char10, "No of selectyed data
END OF ty_error_log.
*Structure for keeping the output data
TYPES : BEGIN OF ty_final,
VTNAM(018) type C,
CHAR1(030) type C,
CHAR2(030) type C,
CHAR3(030) type C,
CHAR4(030) type C,
CHAR5(030) type C,
CHAR6(030) type C,
CHAR7(030) type C,
CHAR8(030) type C,
CHAR9(030) type C,
CHAR10(030) type C,
CHAR11(030) type C,
CHAR12(030) type C,
CHAR13(030) type C,
CHAR14(030) type C,
CHAR15(030) type C,
FLAG(001) type C,
END OF ty_final.
TYPES: begin of TY_CONTENTHD,
VTNAM(018) type C,
FLAG(001) type C,
end of TY_CONTENTHD.
TYPES: begin of TY_CONTENT,
VTNAM(018) type C,
CHAR1(030) type C,
CHAR2(030) type C,
CHAR3(030) type C,
CHAR4(030) type C,
CHAR5(030) type C,
CHAR6(030) type C,
CHAR7(030) type C,
CHAR8(030) type C,
CHAR9(030) type C,
CHAR10(030) type C,
CHAR11(030) type C,
CHAR12(030) type C,
CHAR13(030) type C,
CHAR14(030) type C,
CHAR15(030) type C,
FLAG(001) type C,
Z_VARCOND type VARCOND.
TYPES: end of TY_CONTENT.
TYPES: begin of TY_CONTENTTAB,
VTNAM(018) type C,
COMP1(30) TYPE C,
CHAR1(030) type C,
COMP2(30) TYPE C,
CHAR2(030) type C,
COMP3(30) TYPE C,
CHAR3(030) type C,
COMP4(30) TYPE C,
CHAR4(030) type C,
COMP5(30) TYPE C,
CHAR5(030) type C,
COMP6(30) TYPE C,
CHAR6(030) type C,
COMP7(30) TYPE C,
CHAR7(030) type C,
COMP8(30) TYPE C,
CHAR8(030) type C,
COMP9(30) TYPE C,
CHAR9(030) type C,
COMP10(30) TYPE C,
CHAR10(030) type C,
COMP11(30) TYPE C,
CHAR11(030) type C,
COMP12(30) TYPE C,
CHAR12(030) type C,
COMP13(30) TYPE C,
CHAR13(030) type C,
COMP14(30) TYPE C,
CHAR14(030) type C,
COMP15(30) TYPE C,
CHAR15(030) type C,
FLAG(001) type C.
TYPES: end of TY_CONTENTTAB.
TYPES: BEGIN OF TY_E1CUVTM,
MSGFN TYPE MSGFN,
VAR_TAB TYPE APITABL,
STATUS TYPE RCUTBST,
VTGROUP TYPE RCUTBGR,
AUTHSTRUC TYPE RCUTBBE,
AUTHENTRY TYPE RCUFNBI,
FLDELETE TYPE FLLKENZ,
DBTABNAME TYPE TABNAME16,
DBCONACTIVE TYPE DBCON_ACTI,
PRESDEC TYPE VTDCT,
END OF TY_E1CUVTM.
TYPES: BEGIN OF TY_E1CUV1M,
MSGFN TYPE MSGFN,
VTLINENO TYPE VTLINENO,
VTCHARACT TYPE ATNAM,
ATWRT TYPE ATWRT,
ATFLV TYPE ATFLV,
ATAWE TYPE MSEHI,
ATFLB TYPE ATFLB,
ATAW1 TYPE MSEHI,
ATCOD TYPE ATCOD,
ATTLV TYPE ATTLV,
ATTLB TYPE ATTLB,
ATPRZ TYPE ATPRZ,
ATINC TYPE ATINC,
VTLINENO5 TYPE VTLINENO5,
END OF TY_E1CUV1M.
TYPES: BEGIN OF TY_E1DATEM,
MSGFN TYPE MSGFN,
KEY_DATE TYPE SYDATUM,
AENNR TYPE AENNR,
EFFECTIVITY TYPE CC_MTEFF,
END OF TY_E1DATEM.
TYPES: BEGIN OF ty_vtnam,
vtint TYPE vtint, " Internal number of variant table
vtnam TYPE vtnam, " Name of variant table
dbtab_name type tabname16, "Custom table Name
error TYPE char1, " Indicates error in data format
reas TYPE char50, " Reason for failure
END OF ty_vtnam.
Get data type for characteristic
TYPES: BEGIN OF ty_cabn,
atinn TYPE atinn, "Internal characteristic
atnam TYPE atnam, "Characteristic Name
atfor TYPE atfor, "Data type of characteristic
atson TYPE atson, "Indicator: Additional Values
atprt TYPE atprt, "Check table
atprr TYPE atprr, "Name of Check Report Program
atprf TYPE atprf, "Function Module for Checking Values
anzdz TYPE anzdz, "Number of Decimal Places
check TYPE char1, "Indicates check required or not
END OF ty_cabn.
Get field names of variant table
TYPES: BEGIN OF ty_cuvtab_fld,
vtint TYPE vtint, " Internal number of variant table
atinn TYPE atinn, " Internal characteristic
vtpos TYPE vtpos, " Item number of characteristic in variant
*mod-012
DBFLD type NAME_FELD,
*mod-012
exist TYPE char1, " X Indictaes characteristic is part of fil
END OF ty_cuvtab_fld.
Store all data in internal table
TYPES: BEGIN OF ty_file,
vtnam TYPE vtnam,
char1 TYPE atwrt,
char2 TYPE atwrt,
char3 TYPE atwrt,
char4 TYPE atwrt,
char5 TYPE atwrt,
char6 TYPE atwrt,
char7 TYPE atwrt,
char8 TYPE atwrt,
char9 TYPE atwrt,
char10 TYPE atwrt,
char11 TYPE atwrt,
char12 TYPE atwrt,
char13 TYPE atwrt,
char14 TYPE atwrt,
char15 TYPE atwrt,
flag TYPE char1,
error TYPE char50,
END OF ty_file.
To check for duplicates
TYPES: BEGIN OF ty_dupl,
vtnam TYPE vtnam,
char1 TYPE atwrt,
char2 TYPE atwrt,
char3 TYPE atwrt,
char4 TYPE atwrt,
char5 TYPE atwrt,
char6 TYPE atwrt,
char7 TYPE atwrt,
char8 TYPE atwrt,
char9 TYPE atwrt,
char10 TYPE atwrt,
char11 TYPE atwrt,
char12 TYPE atwrt,
char13 TYPE atwrt,
char14 TYPE atwrt,
char15 TYPE atwrt,
slnid TYPE slnid,
END OF ty_dupl.
Get previously loaded characteristic values for internal table (CHAR)
TYPES: BEGIN OF ty_cuvtab_valc,
vtint TYPE vtint, " Internal number of variant table
slnid TYPE slnid, " Key for value combination in variant tab
atinn TYPE atinn, " Internal characteristic
valc TYPE atwrt, " Characteristic Value
END OF ty_cuvtab_valc.
Get previously loaded characteristic values for internal table (NUM)
TYPES: BEGIN OF ty_cuvtab_valn,
vtint TYPE vtint, " Internal number of variant table
slnid TYPE slnid, " Key for value combination in variant tab
atinn TYPE atinn, " Internal characteristic
val_from TYPE atflv, " Internal floating point from
END OF ty_cuvtab_valn.
Store column positions of characteristics
TYPES: BEGIN OF ty_col_pos,
vtint TYPE vtint, " Internal number of variant table
vtnam TYPE vtnam, " Variant table name
atinn TYPE atinn, "Internal characteristic
atnam TYPE atnam, "Characteristic Name
field TYPE fieldname, "Field name
req TYPE char1, " Required or not
vtpos TYPE vtpos, " Item number of characteristics
END OF ty_col_pos.
Store valid values for characteristics
TYPES: BEGIN OF ty_cawn,
atinn TYPE atinn, " Internal characteristic
atzhl TYPE atzhl, " Int counter
atwrt TYPE atwrt, " Characteristic Value
atflv TYPE atflv, " Internal floating point from
lkenz TYPE lkenz, " Deletion indicator
END OF ty_cawn.
Store error messages for individual lines
TYPES: BEGIN OF ty_error,
vtnam TYPE vtnam, " Variant table name
fname TYPE fieldname, " Fieldname
atnam TYPE atnam, " Characteristic name
atwrt TYPE atwrt, " Characteristic value
row TYPE char5, " Row id
END OF ty_error.
Begin TPR# 4618
To store unique number for variant
TYPES: BEGIN OF ty_vnt_ma,
vtnam TYPE vtnam,
unique_no TYPE ZGTDM_UNQN,
no_chr TYPE ZGTDM_NO_CHR,
END OF ty_vnt_ma.
TYPES: BEGIN OF ty_dbtab,
vtint TYPE vtint,
vtnam TYPE vtnam,
DBTAB_NAME TYPE TABNAME16,
END OF ty_dbtab.
To find out concatenated number for
TYPES: BEGIN OF ty_split,
f1 TYPE char6,
END OF ty_split.
TYPES: BEGIN OF ty_charval,
char TYPE char30,
END OF ty_charval.
TYPES: BEGIN OF TY_DATA,
name TYPE string,
value(15) type c,
END OF TY_DATA.
DATA: I_DATATAB TYPE STANDARD TABLE OF TY_DATA. "#EC NEEDED
TYPES:
TUMLS_MESSTYPE type /SAPDMC/LS_MESSTYPE,
TUMLS_MESSTYPETXT type EDI_TEXT60,
TUMLS_MESSCODE type EDIPMESCOD.
TYPES:
TUMLS_TABNAME TYPE TABNAME, "#EC *
TUMLS_SEGMENT TYPE TABNAME. "#EC *
TYPES:
TUMLS_PATHFILE TYPE /SAPDMC/LS_FILENAME,
TUMLS_FILENAME TYPE /SAPDMC/LS_FILENAME,
TUMLS_FILETEXT TYPE /SAPDMC/LS_FILETEXT.
TYPES:
BEGIN OF type_errorline,
msgty type SYMSGTY,
id type SYMSGID,
msgno type symsgno,
par1 type symsgv,
par2 type symsgv,
par3 type symsgv,
par4 type symsgv,
END OF type_errorline.
TYPES:
type_errortab TYPE SORTED TABLE
OF type_errorline
WITH NON-UNIQUE KEY id msgno par1 par2 par3 par4.
DATA:
LV_LINE2 TYPE REF TO DATA.
GLOBAL INTERNAL TABLES
DATA : i_newinput TYPE STANDARD TABLE OF ty_newinput INITIAL SIZE 0."#EC *
DATA : i_contentheader1 TYPE STANDARD TABLE OF ty_contenthd INITIAL SIZE 0."#EC *
DATA : i_contenttab1 TYPE STANDARD TABLE OF ty_content INITIAL SIZE 0."#EC *
DATA : i_contenttab2 TYPE STANDARD TABLE OF ty_content INITIAL SIZE 0."#EC *
DATA : i_contenttab3 TYPE STANDARD TABLE OF ty_content INITIAL SIZE 0."#EC *
DATA : i_contenttab4 TYPE STANDARD TABLE OF ty_content INITIAL SIZE 0."#EC *
DATA : i_contenttab5 TYPE STANDARD TABLE OF ty_contenttab INITIAL SIZE 0."#EC *
DATA : i_E1CUV1M TYPE STANDARD TABLE OF E1CUV1M INITIAL SIZE 0."#EC *
DATA : i_errortab TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0."#EC *
GLOBAL WORK AREAS
**Internal Table for the structure TY_T001L
DATA : wa_vartab TYPE ty_vartab. "#EC *
DATA : wa_vartabdate TYPE ty_vartabdate. "#EC *
DATA : wa_vardetails TYPE ty_vardetails. "#EC *
DATA : wa_tabinput TYPE ty_tabinput. "#EC *
DATA : wa_dsninput TYPE ty_dsninput. "#EC *
DATA : wa_newinput TYPE ty_newinput. "#EC *
DATA : wa_gnewinput TYPE ty_newinput. "#EC *
DATA : wa_ginput_data TYPE ty_newinput. "#EC *
DATA : wa_final TYPE ty_final. "#EC *
DATA : wa_content TYPE ty_content. "#EC *
DATA : wa_contenthd TYPE ty_contenthd. "#EC *
DATA : wa_contentheader type ty_contenthd. "#EC *
DATA : wa_contenttab TYPE ty_content. "#EC *
DATA : wa_content1 TYPE ty_content. "#EC *
DATA : wa_contenthd1 TYPE ty_contenthd. "#EC *
DATA : wa_contentheader1 type ty_contenthd. "#EC *
DATA : wa_contenttab1 TYPE ty_content. "#EC *
DATA : wa_contenttab2 TYPE ty_content. "#EC *
DATA : wa_contenttab3 TYPE ty_content. "#EC *
DATA : wa_contenttab4 TYPE ty_content. "#EC *
DATA : wa_contenttab5 TYPE ty_contentTAB. "#EC *
DATA : wa_E1CUVTM TYPE E1CUVTM. "#EC *
DATA : wa_E1CUV1M TYPE E1CUV1M. "#EC *
DATA : wa_E1DATEM TYPE E1DATEM. "#EC *
DATA : wa_error_tab TYPE solisti1. "#EC *
INTERNAL TABLES AND WORK AREAS FOR BDC
*Internal Table to store the data to display the error message
DATA : i_errormsg TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0."#EC *
*Internal Table to store the data to display the error message
DATA : i_error TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0."#EC *
DATA : itab_error TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0."#EC *
**Work area to store the data to display the error message
DATA : wa_errormsg TYPE solisti1. "#EC *
**Internal table which will store data for the error log
DATA:i_error_log TYPE STANDARD TABLE OF ty_error_log INITIAL SIZE 0."#EC *
GLOBAL VARIABLES
DATA: G_FILE TYPE string. "#EC *
DATA : g_ctr_input_recs(5) type c. "#EC *
DATA: g_ctr_output_recs(5) type p. "#EC *
data : g_msg(100) type c. "#EC *
data: g_struct_file TYPE string. "#EC *
data: g_login type FILEINTERN. "#EC *
data: g_phyin type string. "#EC *
DATA: g_lprnt type RSPOPSHORT. "#EC *
DATA: g_FNAME1 TYPE STRING. "#EC *
DATA : g_repid TYPE repid, "#EC *
g_exit(1) TYPE C, "#EC *
gx_variant type disvariant. "#EC *
DATA : g_lines TYPE i . "#EC *
data : g_save(1) type c. "#EC *
DATA : g_splid TYPE rspoid . "#EC *
data: p_login type FILEINTERN. "#EC *
data: p_phyin type string. "#EC *
GLOBAL CONSTANTS
CONSTANTS c_msgar TYPE rslgarea VALUE 'F8'. "#EC *
CONSTANTS c_msgid TYPE rslgsubid VALUE 'E'. "#EC *
CONSTANTS c_urgnc TYPE char04 VALUE 'HIGH'. "#EC *
CONSTANTS C_X(1) TYPE C VALUE 'X'. "#EC *
CONSTANTS C_Y(1) TYPE C VALUE 'Y'. "#EC *
CONSTANTS C_Z(1) TYPE C VALUE 'Z'. "#EC *
CONSTANTS C_E(1) TYPE C VALUE 'E'. "#EC *
CONSTANTS C_SAP(3) TYPE C VALUE 'SAP'. "#EC *
CONSTANTS C_MOD(3) TYPE C VALUE 'MOD'. "#EC *
CONSTANTS C_MD1(3) TYPE C VALUE 'MD1'. "#EC *
CONSTANTS C_MD2(3) TYPE C VALUE 'MD2'. "#EC *
CONSTANTS C_MD3(3) TYPE C VALUE 'MD3'. "#EC *
CONSTANTS C_MD4(3) TYPE C VALUE 'MD4'. "#EC *
CONSTANTS C_MD5(3) TYPE C VALUE 'MD5'. "#EC *
constants: c_000001(6) type c value '000001', "#EC *
c_e1cuv1m(7) type c value 'E1CUV1M', "#EC *
c_02(2) type c value '02', "#EC *
c_009(3) type c value '009', "#EC *
c_0001(4) type c value '0001'. "#EC *
constants: c_e1datem(7) type c value 'E1DATEM'. "#EC *
constants: c_e1cuvtm(7) type c value 'E1CUVTM'. "#EC *
GLOBAL INTERNAL TABLES FOR ALV DISPLAY
*Internal tables for ALV Field cat
DATA :
i_fieldcat_ov TYPE STANDARD TABLE OF slis_fieldcat_alv INITIAL SIZE 0,"#EC *
i_fieldcat_dtl TYPE STANDARD TABLE OF slis_fieldcat_alv INITIAL SIZE 0,"#EC *
i_fieldcat_ov1 TYPE lvc_t_fcat, "#EC *
i_events TYPE slis_t_event. "#EC *
GLOBAL WORK AREAS FOR ALV DISPLAY
*Work area for ALV Field layout
DATA : wa_layout TYPE slis_layout_alv. "#EC *
*Work area for Field Cat. Table
DATA : wa_fieldcat TYPE slis_fieldcat_alv. "#EC *
GLOBAL VARIABLES FOR ALV DISPLAY
DATA : g_event TYPE slis_t_event. "#EC *
DATA : g_top_of_page TYPE slis_t_listheader. "#EC *
DATA : g_ok_code TYPE char4. "#EC *
DATA : g_variant type disvariant. "#EC *
GLOBAL CONSTANTS FOR ALV DISPLAY
BAL handling
data: iv_log_handle type BALLOGHNDL. "#EC *
data: is_log_header type bal_s_log. "#EC *
data: iv_object type bal_s_log-object value 'CAPI'. "#EC *
data: iv_subobject type bal_s_log-subobject value 'CAPI_LOG'."#EC *
data: iv_tcode type bal_s_log-altcode value 'SE38'. "#EC *
*MOD-005
RANGES:
R_MESTYP FOR EDIDC-MESTYP, "#EC *
R_CREDAT FOR EDIDC-CREDAT, "#EC *
R_CRETIM FOR EDIDC-CRETIM, "#EC *
R_SNDPRT FOR EDIDC-SNDPRT, "#EC *
R_SNDPRN FOR EDIDC-SNDPRN. "#EC *
DATA:
L_MESSTYPE TYPE TUMLS_MESSTYPE. "#EC *
*MOD-005
data: p_sndprn TYPE EDI_SNDPRN, "#EC *
p_sndprt TYPE EDI_SNDPRT, "#EC *
p_sndpor TYPE EDI_SNDPOR. "#EC *
data: p_rcvprn TYPE EDI_RCVPRN, "#EC *
p_rcvprt TYPE EDI_RCVPRT, "#EC *
p_rcvpor TYPE EDI_RCVPOR. "#EC *
data:
init_E1CUVTM type E1CUVTM, "#EC *
prev_E1CUVTM type E1CUVTM, "#EC *
init_E1DATEM type E1DATEM, "#EC *
prev_E1DATEM type E1DATEM, "#EC *
init_E1CUV1M type E1CUV1M, "#EC *
prev_E1CUV1M type E1CUV1M. "#EC *
Source structure definitions
data:
begin of LSMW_TAB_CONTENT, "#EC *
VTNAM(018) type C,
CHAR1(030) type C,
CHAR2(030) type C,
CHAR3(030) type C,
CHAR4(030) type C,
CHAR5(030) type C,
CHAR6(030) type C,
CHAR7(030) type C,
CHAR8(030) type C,
CHAR9(030) type C,
CHAR10(030) type C,
CHAR11(030) type C,
CHAR12(030) type C,
CHAR13(030) type C,
CHAR14(030) type C,
CHAR15(030) type C,
FLAG(001) type C,
end of LSMW_TAB_CONTENT.
Counters
data:
g_cnt_VAR_TAB type i, "#EC *
g_cnt_TAB_CONTENT type i. "#EC *
Counter ct_xxxxxxxxxx: number of transferred records
data:
ct_edi_dc40 type i, "#EC *
cs_edi_dc40 type i, "#EC *
ct_E1CUVTM type i, "#EC *
cs_E1CUVTM type i, "#EC *
ct_E1DATEM type i, "#EC *
cs_E1DATEM type i, "#EC *
ct_E1CUV1M type i, "#EC *
cs_E1CUV1M type i. "#EC *
Global data definitions and data declarations
DATA: wa_cabn TYPE ty_cabn,
wa_cawn TYPE ty_cawn,
wa_file TYPE ty_file,
wa_vtnam TYPE ty_vtnam,
wa_cuvtab_fld TYPE ty_cuvtab_fld,
wa_cuvtab_valn TYPE ty_cuvtab_valn,
wa_cuvtab_valc TYPE ty_cuvtab_valc,
wa_col_pos TYPE ty_col_pos,
wa_error TYPE ty_error,
wa_dupl TYPE ty_dupl,
wa_dupl_file TYPE ty_dupl.
DATA: wa_vnt_ma TYPE ty_vnt_ma,
wa_split TYPE ty_split.
DATA: wa_charval TYPE ty_charval. "#EC *
Internal table
DATA: i_cabn TYPE STANDARD TABLE OF ty_cabn, "#EC *
i_cabn_temp TYPE STANDARD TABLE OF ty_cabn, "#EC *
i_cabn_atinn TYPE STANDARD TABLE OF ty_cabn, "#EC *
i_file TYPE STANDARD TABLE OF ty_file, "#EC *
i_file_tmp TYPE STANDARD TABLE OF ty_file, "#EC *
i_vtnam TYPE STANDARD TABLE OF ty_vtnam, "#EC *
i_cuvtab TYPE STANDARD TABLE OF ty_vtnam, "#EC *
i_cuvtab_fld TYPE STANDARD TABLE OF ty_cuvtab_fld, "#EC *
i_cuvtab_valn TYPE STANDARD TABLE OF ty_cuvtab_valn, "#EC *
i_cuvtab_valc TYPE STANDARD TABLE OF ty_cuvtab_valc, "#EC *
i_col_pos TYPE STANDARD TABLE OF ty_col_pos, "#EC *
i_cawn TYPE STANDARD TABLE OF ty_cawn, "#EC *
i_cawn_n TYPE STANDARD TABLE OF ty_cawn, "#EC *
i_cawn_c TYPE STANDARD TABLE OF ty_cawn, "#EC *
i_cawn_i TYPE STANDARD TABLE OF ty_cawn, "#EC *
i_cuv_error TYPE STANDARD TABLE OF ty_vtnam, "#EC *
i_dupl TYPE STANDARD TABLE OF ty_dupl, "#EC *
i_dbtab TYPE STANDARD TABLE OF ty_dbtab. "#EC *
DATA: i_vnt_ma TYPE STANDARD TABLE OF ty_vnt_ma, "#EC *
i_split TYPE STANDARD TABLE OF ty_split. "#EC *
DATA: i_dupl_file TYPE STANDARD TABLE OF ty_dupl. "#EC *
DATA: i_charval TYPE STANDARD TABLE OF ty_charval. "#EC *
Constants
CONSTANTS: c_char TYPE atfor VALUE 'CHAR', "#EC *
c_date TYPE atfor VALUE 'DATE', "#EC *
c_time TYPE atfor VALUE 'TIME', "#EC *
c_varcond TYPE atnam VALUE 'Z_VARCOND'. "#EC *
Field Symbols
FIELD-SYMBOLS: <fs_vtnam> TYPE ty_vtnam, "#EC *
<fs_cabn> TYPE ty_cabn, "#EC *
<fs_cuvtab_fld> TYPE ty_cuvtab_fld, "#EC *
<fs_dupl> TYPE ty_dupl. "#EC *
FIELD-SYMBOLS: <FS_DYN_WA> TYPE ANY.
Variables
DATA: g_raw(500) TYPE c, "#EC *
g_invalid TYPE char1, "#EC *
g_error TYPE char1, "#EC *
g_message TYPE char50, "#EC *
g_slnid_c TYPE slnid, "#EC *
g_slnid_n TYPE slnid, "#EC *
g_row TYPE char5. "#EC *
DATA: g_varcond TYPE varcond, "Variant condition "#EC NEEDED
g_split_var TYPE i, "#EC *
g_split_var1 type i. "#EC *
Types: begin of ty_charname,
name type atnam,
end of ty_charname.
data: wa_charname type ty_charname, "#EC *
i_charname type standard table of ty_charname. "#EC *
data: cnt_i type i, "#EC *
g_tabix type char10. "#EC *
Types: begin of ty_itab_zedidc40.
include structure edi_dc40.
TYPES: end of ty_itab_zedidc40.
Types: begin of ty_itab_zedidd40.
include structure edi_dd40.
TYPES: end of ty_itab_zedidd40.
DATA: itab_zedidc40 type standard table of
ty_itab_zedidc40 initial size 0. "#EC *
DATA: itab_zedidd40 type standard table of
ty_itab_zedidd40 initial size 0. "#EC *
DATA: wa_itab_zedidc40 type ty_itab_zedidc40. "#EC NEEDED
DATA: wa_itab_zedidd40 type ty_itab_zedidd40.
*MOD-009
data: itab_ze1cuvtm type e1cuvtm, "#EC *
itab_ze1datem type e1datem, "#EC *
itab_ze1cuv1m type e1cuv1m. "#EC *
data: wdocnum(16) type n value 0. "#EC *
data: wsegnum(6) type n value 0. "#EC *
data: witemno(10) type n value 0. "#EC *
data: witemno_new(10) type n value 0. "#EC *
data: witemno_gst(10) type n value 0. "#EC *
data: witemno_qst(10) type n value 0. "#EC *
TYPES: BEGIN OF ty_input_data1, "#EC *
line(560) type c,
flag(1) type c,
END OF ty_input_data1.
DATA: i_input_data type standard table of
ty_input_data1 initial size 0. "with header line.
DATA: i_input_data1 type standard table of
ty_input_data1 initial size 0. "with header line.
DATA: wa_input_data type ty_input_data1. "#EC *
DATA: g_cnt_input_recs type i. "#EC *
DATA: g_flg_error type c. "#EC *
DATA: l_lines type i. "#EC *
DATA: l_lines1 type i. "#EC *
DATA: l_tabix type i. "#EC *
DATA: wa_input_data1 type ty_input_data1. "#EC *
DATA: FILE TYPE STRING.
Fields that are made available to the user:
DATA:
g_cnt_records_read TYPE i, "#EC *
g_cnt_records_transferred TYPE i, "#EC *
g_cnt_transactions_read TYPE i, "#EC *
g_cnt_transactions_transferred TYPE i, "#EC *
g_cnt_idocs_package TYPE i. "#EC *
data: v_log_handle type balloghndl. "#EC *
DATA: gt_curr_edi_dc40 TYPE STANDARD TABLE OF edi_dc40 initial size 0."#EC *
DATA: gt_curr_edi_dd40 TYPE STANDARD TABLE OF edi_dd40 initial size 0."#EC *
DATA: wa_curr_edi_dc40 TYPE edi_dc40. "#EC *
DATA: wa_curr_edi_dd40 TYPE edi_dd40. "#EC *
internal table for error messages during conversion
DATA: g_error_tab TYPE type_errortab, "#EC *
wa_errortab TYPE type_errorline. "#EC *
DATA: g_edidd_segnam type EDI4SEGNAM, "#EC *
g_edidd_hlevel type EDI4HLEVEC. "#EC *
DATA: g_segnum(6) TYPE n.
DATA: g_objecttype(2) type C.
DATA: P_FNAME(128) TYPE C VALUE '/usr/sap/trans/vartabheader'. " MODIF ID MD1 OBLIGATORY.
DATA: P_FNAME1(128) TYPE C VALUE '/usr/sap/trans/vartabcontent'. " MODIF ID MD1 OBLIGATORY.
field-symbols: <dyn_table> type standard table,
<dyn_table1> type standard table,
<dyn_wa>,
<dyn_wa1> TYPE ANY.
data: dy_table type ref to data,
dy_line type ref to data,
xfc type lvc_s_fcat,
ifc type lvc_t_fcat.
data: l_tabname TYPE tabname.
DATA: l_len_slnid TYPE i, "#EC NEEDED
l_len_varcond TYPE i, "#EC NEEDED
l_temp_slnid TYPE i, "#EC NEEDED
l_temp_slnc TYPE char5, "#EC NEEDED
l_temp_varcond TYPE varcond, "#EC NEEDED
l_sub_var TYPE i, "#EC NEEDED
l_val_split TYPE char10. "#EC NEEDED
DATA: l_invalid. "#EC NEEDED
*Include for Global Data Declaration
*INCLUDE ZGTDMI_VARTAB_TOPDYN.
*INCLUDE /FACTGLB/GTDMI_VARTAB_TOP02.
*Include for Selection Screen
*INCLUDE ZGTDMI_VARTAB_SELDYN.
*INCLUDE /FACTGLB/GTDMI_VARTAB_SEL02.
*Include for Sub Routines
*INCLUDE ZGTDMI_VARTAB_FORMSDYN.
*INCLUDE /FACTGLB/GTDMI_VARTAB_FORMS02.
*& Include /FACTGLB/GTDMI_VARTAB_SEL02 *
*& Include /FACTGLB/GTDMI_VARTAB_SEL
*& Include /FACTGLB/GTDMI_VARTAB_SEL
PROGRAM DESCRIPTION: Variant Table and Content Upload Interface.
DEVELOPER: Aveek Ghose
CREATION DATE: 2008-08-25
RDD NUMBER: DCDD027
TRANSPORT NUMBER(S): RD2K902769
*-- REVISION HISTORY -
DEVELOPER:
DATE APPLIED: YYYY-MM-DD
SCR NUMBER: <Scope Change Request ID>
RDD NUMBER: <Toolset Object ID>
TRANSPORT NUMBER(S):
DESCRIPTION:
DECLARATION FOR SELECTION SCREEN
*selection-screen skip 1.
*For all the input field entries
SELECTION-SCREEN BEGIN OF BLOCK bl1 WITH FRAME TITLE text-001.
*Parameter for Input File Name:
PARAMETERS: p_inpt TYPE RLGRAP-FILENAME MODIF ID MOD . " Presentation server File Variant table
PARAMETERS: p_inpt1 TYPE RLGRAP-FILENAME MODIF ID MOD . " Presentation server File variant Content
SELECTION-SCREEN END OF BLOCK bl1.
IDoc creation
selection-screen begin of block idocpars
with frame title text-006.
parameters:
p_trfcpt as checkbox default C_X MODIF ID MD3,
p_packge(5) type n default 1 MODIF ID MD3.
selection-screen end of block idocpars.
SELECTION-SCREEN BEGIN OF BLOCK bl3 WITH FRAME TITLE text-032.
Radio Buttons :
parameters:
rb_apsrv RADIOBUTTON GROUP RB1 DEFAULT 'X' USER-COMMAND UCOM,
rb_convt RADIOBUTTON GROUP RB1,
rb_idoc RADIOBUTTON GROUP RB1.
rb_proc RADIOBUTTON GROUP RB1.
SELECTION-SCREEN END OF BLOCK bl3.
INITIALIZATION
INITIALIZATION.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_INPT.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
STATIC = C_X
CHANGING
FILE_NAME = P_INPT
EXCEPTIONS
MASK_TOO_LONG = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE e241.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_INPT1.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
STATIC = C_X
CHANGING
FILE_NAME = P_INPT1
EXCEPTIONS
MASK_TOO_LONG = 1
OTHERS = 2.
-
Dynamically add and embed WD components without predefining an interface
Hey Community,
I have the following problem:
I have a view with many ViewContainers in it. When I start the programm I want to decide dynamically which components should be used and displayed in these containers. Bbefore I start the programm I do not know which components I am going to load.
I already saw the possibility to predefine an interface for all components but in my case there would be no common interface. Beside that I tried it with the Interface IF_WD_VIEW_CONTROLLER and its method Prepare_dynamic_navigation. This method looks very similar, but I don' want a navigation, I just want to display it in an existing view.
So my question:
Is it possible to add WD components and embed their views to existing view cointainers during runtime?
Thank you for your help!Have a look at the MAIN view of the FPM_GAF_COMPONENT in the WDDOINIT method. It creates a component usage and embeds the used component view into current view.
DATA: lr_usage_group TYPE REF TO if_wd_component_usage_group.
DATA: lr_component TYPE REF TO if_wd_component.
lr_component = wd_comp_controller->wd_get_api( ).
lr_usage_group = lr_component->create_cmp_usage_group(
name = 'MESSAGE_AREA_USAGES'
used_component = 'FPM_MESSAGE_MANAGER' ).
wd_this->mo_message_area_usage = lr_usage_group->add_component_usage( 'MESSAGE_AREA_USAGE' ).
wd_this->mo_message_area_usage->create_component( 'FPM_MESSAGE_MANAGER' ).
DATA: lr_view_controller_api TYPE REF TO if_wd_view_controller.
lr_view_controller_api = wd_this->wd_get_api( ).
lr_view_controller_api->prepare_dynamic_navigation(
source_window_name = 'FPM_WINDOW'
source_vusage_name = 'MAIN_USAGE_1'
source_plug_name = 'OUT'
target_component_name = 'FPM_MESSAGE_MANAGER'
target_component_usage = 'MESSAGE_AREA_USAGE'
target_view_name = 'MESSAGES'
target_plug_name = 'DEFAULT'
target_embedding_position = 'MAIN/VC_MESSAGE_AREA' ).
wd_this->fire_out_plg( ).
I can't see why you couldn't repeat this multiple times!
given that what you are asking to do is what the FPM does - it certainly should be possible!
Hope this code snippit helps. -
Initial sizing of sga memory components.
Hi to all,
I want to know that how many granules be allocated to each sga components initially when we use automatic memory menagement. Let's say SGA _target is 1g. version 10.2.0
thnxs in advance.The SGA comprises a number of memory components, which are pools of memory used to satisfy a particular class of memory allocation requests. Examples of memory components include the shared pool (used to allocate memory for SQL and PL/SQL execution), the java pool (used for java objects and other java execution memory), and the buffer cache (used for caching disk blocks). All SGA components allocate and deallocate space in units of granules. Oracle Database tracks SGA memory use in internal numbers of granules for each SGA component.
The memory for dynamic components in the SGA is allocated in the unit of granules. Granule size is determined by total SGA size. Generally speaking, on most platforms, if the total SGA size is equal to or less than 1 GB, then granule size is 4 MB. For SGAs larger than 1 GB, granule size is 16 MB. Some platform dependencies may arise. For example, on 32-bit Windows NT, the granule size is 8 MB for SGAs larger than 1 GB. Consult your operating system specific documentation for more details.
You can query the V$SGAINFO view to see the granule size that is being used by an instance. The same granule size is used for all components in the SGA.
If you specify a size for a component that is not a multiple of granule size, Oracle Database rounds the specified size up to the nearest multiple. For example, if the granule size is 4 MB and you specify DB_CACHE_SIZE as 10 MB, the database actually allocates 12 MB. -
Issue in Dynamic Structure and Component Program
Hi,
I have a requirement of creating an inbound idoc program and populating dynamic structures. The program for the dynamic structure creation is as follows: ( I have been referencing Heilmans Blog ): The part for the inbound idoc creation works fine. The data will come in a flat file with Table name and 15 characterstcis. The table name is known at runtime. I need to create the dynamic table, find out the components and then populate the custom table with the dynamically created structures.
Custom table: 4 components
Internal table from file: 15 components with value.
There could be more than one table in the flat file and not all components or char in the flat file is mapped to the table. I would need some expertise in coding the OO part of the program.
Any inputs will be apprciated:
<removed 6845 lines of code (forum software cut off at this point, there was more!) - did you actually expect anyone to read that? Also, please use code tags (the "<>" icon on the toolbar)>
Edited by: Mike Pokraka on Aug 3, 2008 6:15 PMHi,
The program works fine fo creating inbound idocs. It is the dynamic structure population that seems to be the problem mentioned earlier: Here is the code:
*& Report /FACTGLB/GTDMI_VARTAB_IDOCS02 *
PROGRAM DESCRIPTION: Variant Table and Content Upload Interface.
DEVELOPER: Aveek Ghose
CREATION DATE: 2008-04-18
RDD NUMBER: DCDD027
TRANSPORT NUMBER(S): RD2K902769
*-- REVISION HISTORY -
DEVELOPER:
DATE APPLIED: YYYY-MM-DD
SCR NUMBER: <Scope Change Request ID>
RDD NUMBER: <Toolset Object ID>
TRANSPORT NUMBER(S):
DESCRIPTION:
REPORT ZGTDMI_VARTAB_IDOCS_DYNAMIC
NO STANDARD PAGE HEADING
LINE-SIZE 150
LINE-COUNT 55
MESSAGE-ID zfactglb.
**Include for Global Data Declaration
*INCLUDE /FACTGLB/GTDMI_VARTAB_TOP02.
**Include for Selection Screen
*INCLUDE /FACTGLB/GTDMI_VARTAB_SEL02.
**Include for Sub Routines
*INCLUDE /FACTGLB/GTDMI_VARTAB_FORMS02.
*& Include /FACTGLB/GTDMI_VARTAB_TOP02 *
*& Include /FACTGLB/GTDMI_VARTAB_TOP02 *
*& Include /FACTGLB/GTDMI_VARTAB_TOP
*& Include /FACTGLB/GTDMI_VARTAB_TOP
PROGRAM DESCRIPTION: Variant Table and Content Upload Interface.
DEVELOPER: Aveek Ghose
CREATION DATE: 2008-04-18
RDD NUMBER: DCDD027
TRANSPORT NUMBER(S): RD2K902769
*-- REVISION HISTORY -
DEVELOPER:
DATE APPLIED: YYYY-MM-DD
SCR NUMBER: <Scope Change Request ID>
RDD NUMBER: <Toolset Object ID>
TRANSPORT NUMBER(S):
DESCRIPTION:
TYPE POOLS
*Type declaration for ALV display
TYPE-POOLS : slis.
Include .
type-pools: col, "#EC *
icon, "#EC *
sym, "#EC *
abap. "#EC *
Target structure definitions
tables:
E1CUVTM, "#EC *
E1DATEM, "#EC *
E1CUV1M, "#EC *
edp21, "#EC *
edi_dc40, "#EC *
edi_dd40, "#EC *
edi_ds40. "#EC *
GLOBAL TYPES
TYPES : BEGIN OF ty_vartab.
include structure E1CUVTM.
TYPES: END OF ty_vartab.
TYPES : BEGIN OF ty_vartabdate.
INCLUDE STRUCTURE E1DATEM.
TYPES : END OF ty_vartabdate.
*Structure for data retreived
TYPES : BEGIN OF ty_vardetails.
INCLUDE STRUCTURE E1CUV1M.
TYPES : END OF ty_vardetails.
*Structure for data retreived from table tabinput.
TYPES : BEGIN OF ty_tabinput,
lines type string,
END OF ty_tabinput.
*Structure for data retreived from Table dsn_input.
TYPES : BEGIN OF ty_dsninput, "#EC *
LINE(101) type c,
END OF ty_dsninput.
*Structure for data retreived from Table dsn_input.
TYPES : BEGIN OF ty_newinput, "#EC *
LINE(101) type c,
flag(1) type c,
END OF ty_newinput.
*Structure for keeping the values of all the custom tables
TYPES : BEGIN OF ty_custom_tabs,
matnr TYPE matnr, "Material Number
werks TYPE werks_d, "Plant
lgort TYPE lgort_d, "Storage Location
qunty TYPE P DECIMALS 2, "Standard Order Quantity
det_loc TYPE CHAR6, "Detail Location
class TYPE CHAR2, "Class
rate TYPE P DECIMALS 2, "Rate
END OF ty_custom_tabs.
*Type declared for the internal table and work area which will store
*fields for error log
TYPES : BEGIN OF ty_error_log,
matnr TYPE matnr, "Material Number
mtart TYPE mtart, "Material Type
sel_data TYPE char10, "No of selectyed data
END OF ty_error_log.
*Structure for keeping the output data
TYPES : BEGIN OF ty_final,
VTNAM(018) type C,
CHAR1(030) type C,
CHAR2(030) type C,
CHAR3(030) type C,
CHAR4(030) type C,
CHAR5(030) type C,
CHAR6(030) type C,
CHAR7(030) type C,
CHAR8(030) type C,
CHAR9(030) type C,
CHAR10(030) type C,
CHAR11(030) type C,
CHAR12(030) type C,
CHAR13(030) type C,
CHAR14(030) type C,
CHAR15(030) type C,
FLAG(001) type C,
END OF ty_final.
TYPES: begin of TY_CONTENTHD,
VTNAM(018) type C,
FLAG(001) type C,
end of TY_CONTENTHD.
TYPES: begin of TY_CONTENT,
VTNAM(018) type C,
CHAR1(030) type C,
CHAR2(030) type C,
CHAR3(030) type C,
CHAR4(030) type C,
CHAR5(030) type C,
CHAR6(030) type C,
CHAR7(030) type C,
CHAR8(030) type C,
CHAR9(030) type C,
CHAR10(030) type C,
CHAR11(030) type C,
CHAR12(030) type C,
CHAR13(030) type C,
CHAR14(030) type C,
CHAR15(030) type C,
FLAG(001) type C.
TYPES: end of TY_CONTENT.
TYPES: BEGIN OF TY_E1CUVTM,
MSGFN TYPE MSGFN,
VAR_TAB TYPE APITABL,
STATUS TYPE RCUTBST,
VTGROUP TYPE RCUTBGR,
AUTHSTRUC TYPE RCUTBBE,
AUTHENTRY TYPE RCUFNBI,
FLDELETE TYPE FLLKENZ,
DBTABNAME TYPE TABNAME16,
DBCONACTIVE TYPE DBCON_ACTI,
PRESDEC TYPE VTDCT,
END OF TY_E1CUVTM.
TYPES: BEGIN OF TY_E1CUV1M,
MSGFN TYPE MSGFN,
VTLINENO TYPE VTLINENO,
VTCHARACT TYPE ATNAM,
ATWRT TYPE ATWRT,
ATFLV TYPE ATFLV,
ATAWE TYPE MSEHI,
ATFLB TYPE ATFLB,
ATAW1 TYPE MSEHI,
ATCOD TYPE ATCOD,
ATTLV TYPE ATTLV,
ATTLB TYPE ATTLB,
ATPRZ TYPE ATPRZ,
ATINC TYPE ATINC,
VTLINENO5 TYPE VTLINENO5,
END OF TY_E1CUV1M.
TYPES: BEGIN OF TY_E1DATEM,
MSGFN TYPE MSGFN,
KEY_DATE TYPE SYDATUM,
AENNR TYPE AENNR,
EFFECTIVITY TYPE CC_MTEFF,
END OF TY_E1DATEM.
TYPES: BEGIN OF ty_vtnam,
vtint TYPE vtint, " Internal number of variant table
vtnam TYPE vtnam, " Name of variant table
error TYPE char1, " Indicates error in data format
reas TYPE char50, " Reason for failure
END OF ty_vtnam.
Get data type for characteristic
TYPES: BEGIN OF ty_cabn,
atinn TYPE atinn, "Internal characteristic
atnam TYPE atnam, "Characteristic Name
atfor TYPE atfor, "Data type of characteristic
atson TYPE atson, "Indicator: Additional Values
atprt TYPE atprt, "Check table
atprr TYPE atprr, "Name of Check Report Program
atprf TYPE atprf, "Function Module for Checking Values
anzdz TYPE anzdz, "Number of Decimal Places
check TYPE char1, "Indicates check required or not
END OF ty_cabn.
Get field names of variant table
TYPES: BEGIN OF ty_cuvtab_fld,
vtint TYPE vtint, " Internal number of variant table
atinn TYPE atinn, " Internal characteristic
vtpos TYPE vtpos, " Item number of characteristic in variant
exist TYPE char1, " X Indictaes characteristic is part of fil
END OF ty_cuvtab_fld.
Store all data in internal table
TYPES: BEGIN OF ty_file,
vtnam TYPE vtnam,
char1 TYPE atwrt,
char2 TYPE atwrt,
char3 TYPE atwrt,
char4 TYPE atwrt,
char5 TYPE atwrt,
char6 TYPE atwrt,
char7 TYPE atwrt,
char8 TYPE atwrt,
char9 TYPE atwrt,
char10 TYPE atwrt,
char11 TYPE atwrt,
char12 TYPE atwrt,
char13 TYPE atwrt,
char14 TYPE atwrt,
char15 TYPE atwrt,
flag TYPE char1,
error TYPE char50,
END OF ty_file.
To check for duplicates
TYPES: BEGIN OF ty_dupl,
vtnam TYPE vtnam,
char1 TYPE atwrt,
char2 TYPE atwrt,
char3 TYPE atwrt,
char4 TYPE atwrt,
char5 TYPE atwrt,
char6 TYPE atwrt,
char7 TYPE atwrt,
char8 TYPE atwrt,
char9 TYPE atwrt,
char10 TYPE atwrt,
char11 TYPE atwrt,
char12 TYPE atwrt,
char13 TYPE atwrt,
char14 TYPE atwrt,
char15 TYPE atwrt,
slnid TYPE slnid,
END OF ty_dupl.
Get previously loaded characteristic values for internal table (CHAR)
TYPES: BEGIN OF ty_cuvtab_valc,
vtint TYPE vtint, " Internal number of variant table
slnid TYPE slnid, " Key for value combination in variant tab
atinn TYPE atinn, " Internal characteristic
valc TYPE atwrt, " Characteristic Value
END OF ty_cuvtab_valc.
Get previously loaded characteristic values for internal table (NUM)
TYPES: BEGIN OF ty_cuvtab_valn,
vtint TYPE vtint, " Internal number of variant table
slnid TYPE slnid, " Key for value combination in variant tab
atinn TYPE atinn, " Internal characteristic
val_from TYPE atflv, " Internal floating point from
END OF ty_cuvtab_valn.
Store column positions of characteristics
TYPES: BEGIN OF ty_col_pos,
vtint TYPE vtint, " Internal number of variant table
vtnam TYPE vtnam, " Variant table name
atinn TYPE atinn, "Internal characteristic
atnam TYPE atnam, "Characteristic Name
field TYPE fieldname, "Field name
req TYPE char1, " Required or not
vtpos TYPE vtpos, " Item number of characteristics
END OF ty_col_pos.
Store valid values for characteristics
TYPES: BEGIN OF ty_cawn,
atinn TYPE atinn, " Internal characteristic
atzhl TYPE atzhl, " Int counter
atwrt TYPE atwrt, " Characteristic Value
atflv TYPE atflv, " Internal floating point from
lkenz TYPE lkenz, " Deletion indicator
END OF ty_cawn.
Store error messages for individual lines
TYPES: BEGIN OF ty_error,
vtnam TYPE vtnam, " Variant table name
fname TYPE fieldname, " Fieldname
atnam TYPE atnam, " Characteristic name
atwrt TYPE atwrt, " Characteristic value
row TYPE char5, " Row id
END OF ty_error.
Begin TPR# 4618
To store unique number for variant
TYPES: BEGIN OF ty_vnt_ma,
vtnam TYPE vtnam,
unique_no TYPE ZGTDM_UNQN,
no_chr TYPE ZGTDM_NO_CHR,
END OF ty_vnt_ma.
To find out concatenated number for
TYPES: BEGIN OF ty_split,
f1 TYPE char6,
END OF ty_split.
TYPES: BEGIN OF ty_charval,
char TYPE char30,
END OF ty_charval.
TYPES: BEGIN OF TY_DATA,
name TYPE string,
value(15) type c,
END OF TY_DATA.
DATA: I_DATATAB TYPE STANDARD TABLE OF TY_DATA.
TYPES:
TUMLS_MESSTYPE type /SAPDMC/LS_MESSTYPE,
TUMLS_MESSTYPETXT type EDI_TEXT60,
TUMLS_MESSCODE type EDIPMESCOD.
TYPES:
TUMLS_TABNAME TYPE TABNAME, "#EC *
TUMLS_SEGMENT TYPE TABNAME. "#EC *
TYPES:
TUMLS_PATHFILE TYPE /SAPDMC/LS_FILENAME,
TUMLS_FILENAME TYPE /SAPDMC/LS_FILENAME,
TUMLS_FILETEXT TYPE /SAPDMC/LS_FILETEXT.
TYPES:
BEGIN OF type_errorline,
msgty type SYMSGTY,
id type SYMSGID,
msgno type symsgno,
par1 type symsgv,
par2 type symsgv,
par3 type symsgv,
par4 type symsgv,
END OF type_errorline.
TYPES:
type_errortab TYPE SORTED TABLE
OF type_errorline
WITH NON-UNIQUE KEY id msgno par1 par2 par3 par4.
DATA:
LV_INDEX TYPE SY-INDEX,
LV_INDEX2 TYPE SYINDEX,
LV_TABLE1 TYPE REF TO DATA,
LV_TABLE2 TYPE REF TO DATA,
LV_TABLE3 TYPE REF TO DATA,
LV_TABLE4 TYPE REF TO DATA,
LV_LINE1 TYPE REF TO DATA,
LV_LINE2 TYPE REF TO DATA,
LV_LINE3 TYPE REF TO DATA,
LV_LINE4 TYPE REF TO DATA,
LV_OFFSET1 TYPE SYTABIX,
ST_IS_LAYOUT_ALV TYPE SLIS_LAYOUT_ALV,
L_IT_FCATLOG_ALV TYPE SLIS_T_FIELDCAT_ALV,
L_IT_FLDCAT TYPE LVC_T_FCAT.
GLOBAL INTERNAL TABLES
DATA : i_newinput TYPE STANDARD TABLE OF ty_newinput INITIAL SIZE 0."#EC *
DATA : i_contentheader1 TYPE STANDARD TABLE OF ty_contenthd INITIAL SIZE 0."#EC *
DATA : i_contenttab1 TYPE STANDARD TABLE OF ty_content INITIAL SIZE 0."#EC *
DATA : i_contenttab2 TYPE STANDARD TABLE OF ty_content INITIAL SIZE 0."#EC *
DATA : i_contenttab3 TYPE STANDARD TABLE OF ty_content INITIAL SIZE 0."#EC *
DATA : i_contenttab4 TYPE STANDARD TABLE OF ty_content INITIAL SIZE 0."#EC *
DATA : i_E1CUV1M TYPE STANDARD TABLE OF E1CUV1M INITIAL SIZE 0."#EC *
DATA : i_errortab TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0."#EC *
GLOBAL WORK AREAS
**Internal Table for the structure TY_T001L
DATA : wa_vartab TYPE ty_vartab. "#EC *
DATA : wa_vartabdate TYPE ty_vartabdate. "#EC *
DATA : wa_vardetails TYPE ty_vardetails. "#EC *
DATA : wa_tabinput TYPE ty_tabinput. "#EC *
DATA : wa_dsninput TYPE ty_dsninput. "#EC *
DATA : wa_newinput TYPE ty_newinput. "#EC *
DATA : wa_gnewinput TYPE ty_newinput. "#EC *
DATA : wa_ginput_data TYPE ty_newinput. "#EC *
DATA : wa_final TYPE ty_final. "#EC *
DATA : wa_content TYPE ty_content. "#EC *
DATA : wa_contenthd TYPE ty_contenthd. "#EC *
DATA : wa_contentheader type ty_contenthd. "#EC *
DATA : wa_contenttab TYPE ty_content. "#EC *
DATA : wa_content1 TYPE ty_content. "#EC *
DATA : wa_contenthd1 TYPE ty_contenthd. "#EC *
DATA : wa_contentheader1 type ty_contenthd. "#EC *
DATA : wa_contenttab1 TYPE ty_content. "#EC *
DATA : wa_contenttab2 TYPE ty_content. "#EC *'
DATA : wa_contenttab3 TYPE ty_content. "#EC *
DATA : wa_contenttab4 TYPE ty_content. "#EC *
DATA : wa_E1CUVTM TYPE E1CUVTM. "#EC *
DATA : wa_E1CUV1M TYPE E1CUV1M. "#EC *
DATA : wa_E1DATEM TYPE E1DATEM. "#EC *
DATA : wa_error_tab TYPE solisti1. "#EC *
INTERNAL TABLES AND WORK AREAS FOR BDC
*Internal Table to store the data to display the error message
DATA : i_errormsg TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0."#EC *
*Internal Table to store the data to display the error message
DATA : i_error TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0."#EC *
DATA : itab_error TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0."#EC *
**Work area to store the data to display the error message
DATA : wa_errormsg TYPE solisti1. "#EC *
**Internal table which will store data for the error log
DATA:i_error_log TYPE STANDARD TABLE OF ty_error_log INITIAL SIZE 0."#EC *
GLOBAL VARIABLES
DATA: G_FILE TYPE string. "#EC *
DATA : g_ctr_input_recs(5) type c. "#EC *
DATA: g_ctr_output_recs(5) type p. "#EC *
data : g_msg(100) type c. "#EC *
data: g_struct_file TYPE string. "#EC *
data: g_login type FILEINTERN. "#EC *
data: g_phyin type string. "#EC *
DATA: g_lprnt type RSPOPSHORT. "#EC *
DATA: g_FNAME1 TYPE STRING. "#EC *
DATA : g_repid TYPE repid, "#EC *
g_exit(1) TYPE C, "#EC *
gx_variant type disvariant. "#EC *
DATA : g_lines TYPE i . "#EC *
data : g_save(1) type c. "#EC *
DATA : g_splid TYPE rspoid . "#EC *
data: p_login type FILEINTERN. "#EC *
data: p_phyin type string. "#EC *
DATA:
go_table TYPE REF TO cl_salv_table,
go_sdescr TYPE REF TO cl_abap_structdescr,
go_tdescr TYPE REF TO cl_abap_tabledescr,
gdo_data TYPE REF TO data,
gdo_handle TYPE REF TO data,
gs_comp TYPE abap_componentdescr,
gt_components TYPE abap_component_tab.
FIELD-SYMBOLS:
TYPE table.
GLOBAL CONSTANTS
CONSTANTS c_msgar TYPE rslgarea VALUE 'F8'. "#EC *
CONSTANTS c_msgid TYPE rslgsubid VALUE 'E'. "#EC *
CONSTANTS c_urgnc TYPE char04 VALUE 'HIGH'. "#EC *
CONSTANTS C_X(1) TYPE C VALUE 'X'. "#EC *
CONSTANTS C_Y(1) TYPE C VALUE 'Y'. "#EC *
CONSTANTS C_Z(1) TYPE C VALUE 'Z'. "#EC *
CONSTANTS C_E(1) TYPE C VALUE 'E'. "#EC *
CONSTANTS C_SAP(3) TYPE C VALUE 'SAP'. "#EC *
CONSTANTS C_MOD(3) TYPE C VALUE 'MOD'. "#EC *
CONSTANTS C_MD1(3) TYPE C VALUE 'MD1'. "#EC *
CONSTANTS C_MD2(3) TYPE C VALUE 'MD2'. "#EC *
CONSTANTS C_MD3(3) TYPE C VALUE 'MD3'. "#EC *
constants: c_000001(6) type c value '000001', "#EC *
c_e1cuv1m(7) type c value 'E1CUV1M', "#EC *
c_02(2) type c value '02', "#EC *
c_009(3) type c value '009', "#EC *
c_0001(4) type c value '0001'. "#EC *
constants: c_e1datem(7) type c value 'E1DATEM'. "#EC *
constants: c_e1cuvtm(7) type c value 'E1CUVTM'. "#EC *
GLOBAL INTERNAL TABLES FOR ALV DISPLAY
*Internal tables for ALV Field cat
DATA :
i_fieldcat_ov TYPE STANDARD TABLE OF slis_fieldcat_alv INITIAL SIZE 0,"#EC *
i_fieldcat_dtl TYPE STANDARD TABLE OF slis_fieldcat_alv INITIAL SIZE 0,"#EC *
i_fieldcat_ov1 TYPE lvc_t_fcat, "#EC *
i_events TYPE slis_t_event. "#EC *
GLOBAL WORK AREAS FOR ALV DISPLAY
*Work area for ALV Field layout
DATA : wa_layout TYPE slis_layout_alv. "#EC *
*Work area for Field Cat. Table
DATA : wa_fieldcat TYPE slis_fieldcat_alv. "#EC *
GLOBAL VARIABLES FOR ALV DISPLAY
DATA : g_event TYPE slis_t_event. "#EC *
DATA : g_top_of_page TYPE slis_t_listheader. "#EC *
DATA : g_ok_code TYPE char4. "#EC *
DATA : g_variant type disvariant. "#EC *
GLOBAL CONSTANTS FOR ALV DISPLAY
BAL handling
data: iv_log_handle type BALLOGHNDL. "#EC *
data: is_log_header type bal_s_log. "#EC *
data: iv_object type bal_s_log-object value 'CAPI'. "#EC *
data: iv_subobject type bal_s_log-subobject value 'CAPI_LOG'."#EC *
data: iv_tcode type bal_s_log-altcode value 'SE38'. "#EC *
*MOD-005
RANGES:
R_MESTYP FOR EDIDC-MESTYP, "#EC *
R_CREDAT FOR EDIDC-CREDAT, "#EC *
R_CRETIM FOR EDIDC-CRETIM, "#EC *
R_SNDPRT FOR EDIDC-SNDPRT, "#EC *
R_SNDPRN FOR EDIDC-SNDPRN. "#EC *
DATA:
L_MESSTYPE TYPE TUMLS_MESSTYPE. "#EC *
*MOD-005
data: p_sndprn TYPE EDI_SNDPRN, "#EC *
p_sndprt TYPE EDI_SNDPRT, "#EC *
p_sndpor TYPE EDI_SNDPOR. "#EC *
data: p_rcvprn TYPE EDI_RCVPRN, "#EC *
p_rcvprt TYPE EDI_RCVPRT, "#EC *
p_rcvpor TYPE EDI_RCVPOR. "#EC *
data:
init_E1CUVTM type E1CUVTM, "#EC *
prev_E1CUVTM type E1CUVTM, "#EC *
init_E1DATEM type E1DATEM, "#EC *
prev_E1DATEM type E1DATEM, "#EC *
init_E1CUV1M type E1CUV1M, "#EC *
prev_E1CUV1M type E1CUV1M. "#EC *
Source structure definitions
data:
begin of LSMW_TAB_CONTENT, "#EC *
VTNAM(018) type C,
CHAR1(030) type C,
CHAR2(030) type C,
CHAR3(030) type C,
CHAR4(030) type C,
CHAR5(030) type C,
CHAR6(030) type C,
CHAR7(030) type C,
CHAR8(030) type C,
CHAR9(030) type C,
CHAR10(030) type C,
CHAR11(030) type C,
CHAR12(030) type C,
CHAR13(030) type C,
CHAR14(030) type C,
CHAR15(030) type C,
FLAG(001) type C,
end of LSMW_TAB_CONTENT.
Counters
data:
g_cnt_VAR_TAB type i, "#EC *
g_cnt_TAB_CONTENT type i. "#EC *
Counter ct_xxxxxxxxxx: number of transferred records
data:
ct_edi_dc40 type i, "#EC *
cs_edi_dc40 type i, "#EC *
ct_E1CUVTM type i, "#EC *
cs_E1CUVTM type i, "#EC *
ct_E1DATEM type i, "#EC *
cs_E1DATEM type i, "#EC *
ct_E1CUV1M type i, "#EC *
cs_E1CUV1M type i. "#EC *
Global data definitions and data declarations
DATA: wa_cabn TYPE ty_cabn,
wa_cawn TYPE ty_cawn,
wa_file TYPE ty_file,
wa_vtnam TYPE ty_vtnam,
wa_cuvtab_fld TYPE ty_cuvtab_fld,
wa_cuvtab_valn TYPE ty_cuvtab_valn,
wa_cuvtab_valc TYPE ty_cuvtab_valc,
wa_col_pos TYPE ty_col_pos,
wa_error TYPE ty_error,
wa_dupl TYPE ty_dupl,
wa_dupl_file TYPE ty_dupl.
DATA: wa_vnt_ma TYPE ty_vnt_ma,
wa_split TYPE ty_split.
DATA: wa_charval TYPE ty_charval. "#EC *
Internal table
DATA: i_cabn TYPE STANDARD TABLE OF ty_cabn, "#EC *
i_cabn_temp TYPE STANDARD TABLE OF ty_cabn, "#EC *
i_cabn_atinn TYPE STANDARD TABLE OF ty_cabn, "#EC *
i_file TYPE STANDARD TABLE OF ty_file, "#EC *
i_file_tmp TYPE STANDARD TABLE OF ty_file, "#EC *
i_vtnam TYPE STANDARD TABLE OF ty_vtnam, "#EC *
i_cuvtab TYPE STANDARD TABLE OF ty_vtnam, "#EC *
i_cuvtab_fld TYPE STANDARD TABLE OF ty_cuvtab_fld, "#EC *
i_cuvtab_valn TYPE STANDARD TABLE OF ty_cuvtab_valn, "#EC *
i_cuvtab_valc TYPE STANDARD TABLE OF ty_cuvtab_valc, "#EC *
i_col_pos TYPE STANDARD TABLE OF ty_col_pos, "#EC *
i_cawn TYPE STANDARD TABLE OF ty_cawn, "#EC *
i_cawn_n TYPE STANDARD TABLE OF ty_cawn, "#EC *
i_cawn_c TYPE STANDARD TABLE OF ty_cawn, "#EC *
i_cawn_i TYPE STANDARD TABLE OF ty_cawn, "#EC *
i_cuv_error TYPE STANDARD TABLE OF ty_vtnam, "#EC *
i_dupl TYPE STANDARD TABLE OF ty_dupl. "#EC *
DATA: i_vnt_ma TYPE STANDARD TABLE OF ty_vnt_ma, "#EC *
i_split TYPE STANDARD TABLE OF ty_split. "#EC *
DATA: i_dupl_file TYPE STANDARD TABLE OF ty_dupl. "#EC *
DATA: i_charval TYPE STANDARD TABLE OF ty_charval. "#EC *
Constants
CONSTANTS: c_char TYPE atfor VALUE 'CHAR', "#EC *
c_date TYPE atfor VALUE 'DATE', "#EC *
c_time TYPE atfor VALUE 'TIME', "#EC *
c_varcond TYPE atnam VALUE 'Z_VARCOND'. "#EC *
Field Symbols
FIELD-SYMBOLS: TYPE ANY.
Variables
DATA: g_raw(500) TYPE c, "#EC *
g_invalid TYPE char1, "#EC *
g_error TYPE char1, "#EC *
g_message TYPE char50, "#EC *
g_slnid_c TYPE slnid, "#EC *
g_slnid_n TYPE slnid, "#EC *
g_row TYPE char5. "#EC *
DATA: g_varcond TYPE varcond, "Variant condition "#EC NEEDED
g_split_var TYPE i. "#EC *
Types: begin of ty_charname,
name type atnam,
end of ty_charname.
data: wa_charname type ty_charname, "#EC *
i_charname type standard table of ty_charname. "#EC *
data: cnt_i type i, "#EC *
g_tabix type char10. "#EC *
Types: begin of ty_itab_zedidc40.
include structure edi_dc40.
TYPES: end of ty_itab_zedidc40.
Types: begin of ty_itab_zedidd40.
include structure edi_dd40.
TYPES: end of ty_itab_zedidd40.
DATA: itab_zedidc40 type standard table of
ty_itab_zedidc40 initial size 0. "#EC *
DATA: itab_zedidd40 type standard table of
ty_itab_zedidd40 initial size 0. "#EC *
DATA: wa_itab_zedidc40 type ty_itab_zedidc40.
DATA: wa_itab_zedidd40 type ty_itab_zedidd40.
*MOD-009
data: itab_ze1cuvtm type e1cuvtm, "#EC *
itab_ze1datem type e1datem, "#EC *
itab_ze1cuv1m type e1cuv1m. "#EC *
data: wdocnum(16) type n value 0. "#EC *
data: wsegnum(6) type n value 0. "#EC *
data: witemno(10) type n value 0. "#EC *
data: witemno_new(10) type n value 0. "#EC *
data: witemno_gst(10) type n value 0. "#EC *
data: witemno_qst(10) type n value 0. "#EC *
TYPES: BEGIN OF ty_input_data1, "#EC *
line(560) type c,
flag(1) type c,
END OF ty_input_data1.
DATA: i_input_data type standard table of
ty_input_data1 initial size 0. "with header line.
DATA: i_input_data1 type standard table of
ty_input_data1 initial size 0. "with header line.
DATA: wa_input_data type ty_input_data1. "#EC *
DATA: g_cnt_input_recs type i. "#EC *
DATA: g_flg_error type c. "#EC *
DATA: l_lines type i. "#EC *
DATA: l_tabix type i. "#EC *
DATA: wa_input_data1 type ty_input_data1. "#EC *
DATA: FILE TYPE STRING.
Fields that are made available to the user:
DATA:
g_cnt_records_read TYPE i, "#EC *
g_cnt_records_transferred TYPE i, "#EC *
g_cnt_transactions_read TYPE i, "#EC *
g_cnt_transactions_transferred TYPE i, "#EC *
g_cnt_idocs_package TYPE i. "#EC *
data: v_log_handle type balloghndl. "#EC *
DATA: gt_curr_edi_dc40 TYPE STANDARD TABLE OF edi_dc40 initial size 0."#EC *
DATA: gt_curr_edi_dd40 TYPE STANDARD TABLE OF edi_dd40 initial size 0."#EC *
DATA: wa_curr_edi_dc40 TYPE edi_dc40. "#EC *
DATA: wa_curr_edi_dd40 TYPE edi_dd40. "#EC *
internal table for error messages during conversion
DATA: g_error_tab TYPE type_errortab, "#EC *
wa_errortab TYPE type_errorline. "#EC *
DATA: g_edidd_segnam type EDI4SEGNAM, "#EC *
g_edidd_hlevel type EDI4HLEVEC. "#EC *
DATA: g_segnum(6) TYPE n.
DATA: g_objecttype(2) type C.
DATA: P_FNAME(128) TYPE C VALUE '/usr/sap/trans/vartabheader'. " MODIF ID MD1 OBLIGATORY.
DATA: P_FNAME1(128) TYPE C VALUE '/usr/sap/trans/vartabcontent'. " MODIF ID MD1 OBLIGATORY.
DATA: alv_fldcat TYPE slis_t_fieldcat_alv,
it_fldcat TYPE lvc_t_fcat.
field-symbols: .
data: dy_table type ref to data,
dy_line type ref to data,
xfc type lvc_s_fcat,
ifc type lvc_t_fcat.
data: l_wa_data TYPE TY_CONTENT,
itab_data TYPE standard table of TY_CONTENT.
DECLARATION FOR SELECTION SCREEN
*selection-screen skip 1.
*For all the input field entries
SELECTION-SCREEN BEGIN OF BLOCK bl1 WITH FRAME TITLE text-001.
*Parameter for Input File Name:
PARAMETERS: p_inpt TYPE RLGRAP-FILENAME MODIF ID MOD . " Presentation server File Variant table
PARAMETERS: p_inpt1 TYPE RLGRAP-FILENAME MODIF ID MOD . " Presentation server File variant Content
SELECTION-SCREEN END OF BLOCK bl1.
IDoc creation
selection-screen begin of block idocpars
with frame title text-006.
parameters:
p_trfcpt as checkbox default C_X MODIF ID MD3,
p_packge(5) type n default 1 MODIF ID MD3.
selection-screen end of block idocpars.
SELECTION-SCREEN BEGIN OF BLOCK bl3 WITH FRAME TITLE text-032.
Radio Buttons :
parameters:
rb_apsrv RADIOBUTTON GROUP RB1 DEFAULT 'X' USER-COMMAND UCOM,
rb_convt RADIOBUTTON GROUP RB1,
rb_idoc RADIOBUTTON GROUP RB1,
rb_proc RADIOBUTTON GROUP RB1.
SELECTION-SCREEN END OF BLOCK bl3.
INITIALIZATION
INITIALIZATION.
Check selection-screen entries *
*AT SELECTION-SCREEN.
PERFORM sub_get_physical_file USING p_fpath p_fname.
PERFORM sub_get_physical_file1 USING p_fpath1 p_fname1.
AT SELECTION SCREEN
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fname.
PERFORM sub_get_file. " CHANGING p_fname. "#EC *
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fname1.
PERFORM sub_get_file1. " CHANGING p_fname1. "#EC *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_INPT.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
STATIC = C_X
CHANGING
FILE_NAME = P_INPT
EXCEPTIONS
MASK_TOO_LONG = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE e241.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_INPT1.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
STATIC = C_X
CHANGING
FILE_NAME = P_INPT1
EXCEPTIONS
MASK_TOO_LONG = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE e241.
ENDIF.
At Selection Screen Output
AT SELECTION-SCREEN OUTPUT.
IF rb_apsrv = 'X'.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = c_mod.
SCREEN-INPUT = 0.
ENDIF.
IF SCREEN-GROUP1 = c_md2.
SCREEN-INPUT = 0.
ENDIF.
IF SCREEN-GROUP1 = c_md3.
SCREEN-INPUT = 0.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
endif.
IF rb_apsrv = 'X'.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = c_md1.
SCREEN-INPUT = 0.
ENDIF.
IF SCREEN-GROUP1 = c_md2.
SCREEN-INPUT = 0.
ENDIF.
IF SCREEN-GROUP1 = c_md3.
SCREEN-INPUT = 0.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
endif.
START-OF-SELECTION
START-OF-SELECTION.
*Subroutines for start of selection event
PERFORM sub_start_selection.
IF rb_apsrv = 'X'.
PERFORM sub_upload_data_app.
MESSAGE i256.
LEAVE LIST-PROCESSING.
EXIT.
ELSE.
PERFORM sub_upload_data.
ENDIF.
PERFORM sub_upload_data.
Get characteristic details
PERFORM sub_get_cabn.
Get value for characteristics
PERFORM sub_get_cawn.
perform sub_convert_transaction.
END-OF-SELECTION.
END OF SELECTION
*MOD-012
Final message
perform sub_final_message_idoc.
Display errorneous variant tables.
perform sub_display_variant.
Display lines with incorrect data
perform sub_display_errorlines.
*Subroutines for end of selection event
PERFORM sub_end_selection.
perform sub_clear_source_tables.
*MOD-012
*& Include /FACTGLB/GTDMI_VARTAB_FORMS02 *
*& Include /FACTGLB/GTDMI_VARTAB_FORMS02 * -
Hi Forum,
when is SGA dynamic ? One SAP note says that the use of parameter db_cache_size make SGA dynamically sizing its buffers. Others say that parameter sga_target
<> 0 decides on dynamic or not. If db_cache_size is set but sga_target is 0, what does this mean ?
Kind regards
hakortDB_CACHE_SIZE itself is a dynamic parameter. Even if you mention SGA_TARGET as 0, its still can be changed dynamically with alter system command. The dynamic word has been used at several places in oracle docs. By making db_cache_size dynamic, any changes done to it are immediately effected. But this doesn't mean that the entire SGA has become dynamic.
With dynamic sga(started from 10g onwards), 5 parameters, which are mentioned by Laura are made dynamic and are collectively set by the SGA_TARGET parameter. This leaves the entire SGA over Oracle's discretion that how to allocate/deallocate memory among these parameters. This setting works only when the SGA_TAGET is set to some non-zero value. Once set to 0, Oracle reverts back to the manual SGA where the parameters can be changed by you dynamically but the entire SGA is still controlled by you. By entire SGA I mean the 5 parameters and the other non-dynamic parameters like Log_buffer and so on.
HTH
Aman.... -
Dynamic Components 1.2 not available in JSF 2.0 ?
Hi,
I would like to use Dynamic:form from "Dynamic Components 1.2" in 11g R2 (11.1.2.3.0) on a JSF. It seems that it is not possible to add a dynamic:form on a JSF. It does not appear when I drag and drop a data control. However, it appears when I drag and drop on a JSPX on the same project.
Does it exist another way to have a dynamic:form on a JSF ? Is it going to be add ?
All the tutorials I read always use JSPX, even in 11g R2, like this one:
http://technology.amis.nl/2011/06/07/adf-11g-r2-adf-business-components-ui-categories-and-dynamic-forms-and-some-new-ide-features/
Thanks,
AlainThe dynamic components are not part of the JSF2.0 part in 11.1.2.x.0. At the moment they only work for jspx files. If you use jspx files in 11.1.2.x.0 you can use the dynamic components.
Timo -
How can we get Dynamic columns and data with RTF Templates in BI Publisher
How can we get Dynamic columns and data with RTf Templates.
My requirement is :
create table xxinv_item_pei_taginfo(item_id number,
Organization_id number,
item varchar2(4000),
record_type varchar2(4000),
record_value CLOB,
State varchar2(4000));
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'USES','fever','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'HOW TO USE','one tablet daily','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'SIDE EFFECTS','XYZ','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'DRUG INTERACTION','ABC','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'OVERDOSE','Go and see doctor','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'NOTES','Take after meal','TX');
select * from xxinv_item_pei_taginfo;
Item id Org Id Item Record_type Record_value State
493991 224 1265-D30 USES fever TX
493991 224 1265-D30 HOW TO USE one tablet daily TX
493991 224 1265-D30 SIDE EFFECTS XYZ TX
493991 224 1265-D30 DRUG INTERACTION ABC TX
493991 224 1265-D30 OVERDOSE Go and see doctor TX
493991 224 1265-D30 NOTES Take after meal TX
Above is my data
I have to fetch the record_type from a lookup where I can have any of the record type, sometime USES, HOW TO USE, SIDE EFFECTS and sometimes some other set of record types
In my report I have to get these record typpes as field name dynamically whichever is available in that lookup and record values against them.
its a BI Publisher report.
please suggestif you have data in db then you can create xml with needed structure
and so you can create bip report
do you have errors or .... ? -
Reading XML file into Dynamic Node and Display its output as Table.
Hi All,
Following is the output of XML file:
<Company>
<Employee>
<Name>John</Name>
<Age>23</Age>
<***>Male</***>
<Location>Frankfurt</Location>
</Employee>
<Employee>
<Name>Tina</Name>
<Age>21</Age>
<***>Female</***>
<Location>Boston</Location>
</Employee>
<Department>
<Name>Sales</Name>
<HQ>Chicago</HQ>
<Emplyoees>2300</Employees>
</Department>
I'm able to read the output through DOM parser. But How do I convert this into dynamic node and display this in Web dynpro as Table?
Any pointers in this regard will be great help?
Thanks
SrikantHi Maksim,
I've used your example and its now helping as there is kind of agreement on that I'll be knowing the structure of Xml and I can fill the nodes.
But suppose if you have Xml has following structure :
<?xml version="1.0" encoding="utf-8"?><DATA>
<item><MAILERID TYPE="C" SIZE="000030">21</MAILERID><ORG_CODE TYPE="C" SIZE="000004">1232</ORG_CODE><EVENTID TYPE="C" SIZE="000015">CONTRACT</EVENTID><SUBSCR_VALUE TYPE="C" SIZE="000001">0</SUBSCR_VALUE></item>
<item><MAILERID TYPE="C" SIZE="000030">21</MAILERID><ORG_CODE TYPE="C" SIZE="000004">1232</ORG_CODE><EVENTID TYPE="C" SIZE="000015">CREDIT</EVENTID><SUBSCR_VALUE TYPE="C" SIZE="000001">0</SUBSCR_VALUE></item>
<item><MAILERID TYPE="C" SIZE="000030">21</MAILERID><ORG_CODE TYPE="C" SIZE="000004">1232</ORG_CODE><EVENTID TYPE="C" SIZE="000015">EMPRESS</EVENTID><SUBSCR_VALUE TYPE="C" SIZE="000001">0</SUBSCR_VALUE></item>
<item><MAILERID TYPE="C" SIZE="000030">21</MAILERID><ORG_CODE TYPE="C" SIZE="000004">1232</ORG_CODE><EVENTID TYPE="C" SIZE="000015">PAYMENT</EVENTID><SUBSCR_VALUE TYPE="C" SIZE="000001">0</SUBSCR_VALUE></item>
<item><MAILERID TYPE="C" SIZE="000030">21</MAILERID><ORG_CODE TYPE="C" SIZE="000004">1232</ORG_CODE><EVENTID TYPE="C" SIZE="000015">PRICE</EVENTID><SUBSCR_VALUE TYPE="C" SIZE="000001">0</SUBSCR_VALUE></item>
</DATA>
How we will do in this case?
Can we have something similar using DOM? Also what is the best method for displaying data being sent in form of XML. And generalize it for cases like this.
Thanks
Srikant -
What is the diffrence between ' Contolfile ' and ' Standby Controlfile' ???
Hi Guru's,
Can someone please help me out with the diffrences between a 'Control File' and 'Standby Controlfile'.
Thanks in advance
Regards,
GirishKind of reply you can always expect from Sybrand...anyways...the controlfile of any production database would always be having a bit in itself which identifies a database as a primary or a standby database, so whenever you try to query select database_role from v$database; for any production database it would always give output as PRIMARY and for a standby it would always give output as PHYSICAL STANDBY..Hope it clears your doubts
Regards,
Ajinkya -
Hi,
I have recently exchanged my white 16GB iphone at the local retail store, but have just noticed that since I exchanged it there does not seem to be any Usage figures in the general settings.
By that I mean the "usage" and "standby" are blank, above the message "usage times will be shown after iphone is fully charged".
To try and correct it, I reset the phone yesterday and it was on charge from 10pm last night to 7am this morning so I would have thought would be fully charged. (the battery meter appears to be fully charged)
Is anyone else experiencing this problem or has any advice on how to correct it?
Thanks for your help.When adding/creating an email account, the following presets are available.
Exchange
MobileMe
Gmail
Yahoo Mail
AOL
If you selected the Yahoo Mail account preset when adding/creating the account, the account was created as an IMAP account with Push access available for received messages along with an option to enable or disable Push access for the account.
The data required to connect with the incoming mail server for an email account to check the incoming mail server for new messages is minute. More battery will be used the more often an account is checked for new messages, but this alone is not a significant battery drain and especially with a single email account. All server stored mailboxes with an IMAP account are not synchronized with the server when the account is checked for new messages. For example, the account's server stored Sent mailbox is not synchronized with the server until the account's Sent mailbox is selected.
Push is not a constant fetch process. With an account that supports Push access for received messages, a new message received at the incoming mail server is "pushed" to the iPhone without the account having to be checked for new messages. In theory, Push access should use less battery compared to automatically checking the account for new messages, which isn't always the case and this also depends on the time interval set for automatically checking for new messages. You can have the account automatically checked for new messages every hour.
Depending on how much data is accessed compared to the number and length of phone calls when roaming internationally, data access can be much more expensive. -
Dynamic SQL and Data with Single Quotes in it.
Hi There,
I have a problem in that I am using dynamic SQL and it happens that one of the columns does contain single quotes (') in it as part of the data. This causes the resultant dynamic SQL to get confused as the single quote that is part of the data is taken to mean end of sting, when in fact its part of the data. This leaves out a dangling single quote that was meant to enclose the string. Here is my dynamic SQL and the result of the parsed SQL that I have captured:
****Dynamic SQL*****
l_sql:='select NOTE_TEMPLATE_ID '||
'FROM TMP_NOTE_TEMPLATE_VALUES '||
'where TRIM(LEGACY_NOTE_CODE)='''||trim(fp_note_code)||''' '||
'and TRIM(DISPLAY_VALUE)='''||trim(fp_note_text)||''' ';
execute immediate l_sql INTO l_note_template_id;
Because the column DISPLAY_VALUE contains data with single quotes, the resultant SQL is:
******PARSED SQL************
select NOTE_TEMPLATE_ID
FROM TMP_NOTE_TEMPLATE_VALUES
where TRIM(LEGACY_NOTE_CODE)='INQ' and TRIM(DISPLAY_VALUE)='Cont'd'
And the problem lies with the single quote between teh characters t and d in the data field for DISPLAY_ITEM. How can I handle this?
Many thanks,I have been reliably informed that if one doesn't enclose char/varchar2 data items in quotes, the right indices may not be usedI am into oracle for past 4 years and for the first time i am hearing this.
Your reliable source is just wrong. Bind variables are variables that store your value and which are used in SQL. They are the proper way to use values in your SQL. By default all variables in PL/SQL is bind variable.
When you can do some thing in just straight SQL just do it. Dynamic SQL does not make any sense to me here.
Thanks,
Karthick. -
Dynamic SQL and Bulk Bind... Interesting Problem !!!
Hi Forum !!
I've got a very interesting problem involving Dynamic SQL and Bulk Bind. I really Hope you guys have some suggestions for me...
Table A contains a column named TX_FORMULA. There are many strings holding expressions like '.3 * 2 + 1.5' or '(3.4 + 2) / .3', all well formed numeric formulas. I want to calculate each formula, finding the number obtained as a result of each calculation.
I wrote something like this:
DECLARE
TYPE T_FormulasNum IS TABLE OF A.TX_FORMULA%TYPE
INDEX BY BINARY_INTEGER;
TYPE T_MontoIndicador IS TABLE OF A.MT_NUMBER%TYPE
INDEX BY BINARY_INTEGER;
V_FormulasNum T_FormulasNum;
V_MontoIndicador T_MontoIndicador;
BEGIN
SELECT DISTINCT CD_INDICADOR,
TX_FORMULA_NUMERICA
BULK COLLECT INTO V_CodIndicador, V_FormulasNum
FROM A;
FORALL i IN V_FormulasNum.FIRST..V_FormulasNum.LAST
EXECUTE IMMEDIATE
'BEGIN
:1 := TO_NUMBER(:2);
END;'
USING V_FormulasNum(i) RETURNING INTO V_MontoIndicador;
END;
But I'm getting the following messages:
ORA-06550: line 22, column 43:
PLS-00597: expression 'V_MONTOINDICADOR' in the INTO list is of wrong type
ORA-06550: line 18, column 5:
PL/SQL: Statement ignored
ORA-06550: line 18, column 5:
PLS-00435: DML statement without BULK In-BIND cannot be used inside FORALL
Any Idea to solve this problem ?
Thanks in Advance !!Hallo,
many many errors...
1. You can use FORALL only in DML operators, in your case you must use simple FOR LOOP.
2. You can use bind variables only in DML- Statements. In other statements you have to use literals (hard parsing).
3. RETURNING INTO - Clause in appropriate , use instead of OUT variable.
4. Remark: FOR I IN FIRST..LAST is not fully correct: if you haven't results, you get EXCEPTION NO_DATA_FOUND. Use Instead of 1..tab.count
This code works.
DECLARE
TYPE T_FormulasNum IS TABLE OF VARCHAR2(255)
INDEX BY BINARY_INTEGER;
TYPE T_MontoIndicador IS TABLE OF NUMBER
INDEX BY BINARY_INTEGER;
V_FormulasNum T_FormulasNum;
V_MontoIndicador T_MontoIndicador;
BEGIN
SELECT DISTINCT CD_INDICATOR,
TX_FORMULA_NUMERICA
BULK COLLECT INTO V_MontoIndicador, V_FormulasNum
FROM A;
FOR i IN 1..V_FormulasNum.count
LOOP
EXECUTE IMMEDIATE
'BEGIN
:v_motto := TO_NUMBER('||v_formulasnum(i)||');
END;'
USING OUT V_MontoIndicador(i);
dbms_output.put_line(v_montoindicador(i));
END LOOP;
END;You have to read more about bulk- binding and dynamic sql.
HTH
Regards
Dmytro
Test table
a
(cd_indicator number,
tx_formula_numerica VARCHAR2(255))
CD_INDICATOR TX_FORMULA_NUMERICA
2 (5+5)*2
1 2*3*4
Message was edited by:
Dmytro Dekhtyaryuk -
I want need to use dynamic SQL, and include a subquery in the where clause. However, I am getting a syntax error.
I have code that looks like this.
SELECT (p_v_sqlobj_select)
INTO CORRESPONDING FIELDS OF TABLE <matrix>
FROM (p_v_sqlobj_from)
WHERE (p_v_sqlobj_where).
and I pass it the following bold-faced SQL where clause (please ignore whether the statement makes sense and is the best way to do it - this is just to illustrate). However, it returns an error.
select tcode from tstc where tcode in <b>( select min( tcode ) as min from tstc )</b>
Am I correct in concluding that I cannot pass complex statements, or have I just missed something?
Thanks for any help.Hi,
Please try with order by clause in select statement and also use descending
select * from (p_table)
into corresponding fields of table <ptab>
up to p_rows rows
order by <fieldname> descending.
aRs -
Issues in persisting dynamic entity and view objects using MDS
Hi All,
I'm trying to create dynamic entity and view objects per user session and to persist these objects throughout the session, I'm trying to use MDS configurations(either file or Database) in adf-config.xml.
I'm facing following two errors while trying to run the app module:
1. MDS error (MetadataNotFoundException): MDS-00013: no metadata found for metadata object "/model/DynamicEntityGenModuleOperations.xml"
2. oracle.mds.exception.ReadOnlyStoreException: MDS-01273: The operation on the resource /sessiondef/dynamic/DynamicDeptEntityDef.xml failed because source metadata store mapped to the namespace / DEFAULT is read only.
I've gone through the following links which talks about the cause of the issue, but still can't figure out the issue in the code or the config file. Please help if, someone has faced a similar issue.
[http://docs.oracle.com/cd/E28271_01/doc.1111/e25450/mds_trouble.htm#BABIAGBG |http://docs.oracle.com/cd/E28271_01/doc.1111/e25450/mds_trouble.htm#BABIAGBG ]
[http://docs.oracle.com/cd/E16162_01/core.1112/e22506/chapter_mds_messages.htm|http://docs.oracle.com/cd/E16162_01/core.1112/e22506/chapter_mds_messages.htm]
Attached is the code for dynamic entity/view object generation and corresponding adf-config.xml used.
///////////App Module Implementation Class/////////////////////////
public class DynamicEntityGenModuleImpl extends ApplicationModuleImpl implements DynamicEntityGenModule {
private static final String DYNAMIC_DETP_VO_INSTANCE = "DynamicDeptVO";
* This is the default constructor (do not remove).
public DynamicEntityGenModuleImpl() {
public ViewObjectImpl getDepartmentsView1() {
return (ViewObjectImpl) findViewObject("DynamicDeptVO");
public void buildDynamicDeptComp() {
ViewObject internalDynamicVO = findViewObject(DYNAMIC_DETP_VO_INSTANCE);
if (internalDynamicVO != null) {
System.out.println("OK VO exists, return Defn- " + internalDynamicVO.getDefFullName());
return;
EntityDefImpl deptEntDef = buildDeptEntitySessionDef();
ViewDefImpl viewDef = buildDeptViewSessionDef(deptEntDef);
addViewToPdefApplicationModule(viewDef);
private EntityDefImpl buildDeptEntitySessionDef() {
try {
EntityDefImpl entDef = new EntityDefImpl(oracle.jbo.server.EntityDefImpl.DEF_SCOPE_SESSION, "DynamicDeptEntityDef");
entDef.setFullName(entDef.getBasePackage() + ".dynamic." + entDef.getName());
entDef.setName(entDef.getName());
System.out.println("Application Module Path name: " + getDefFullName());
System.out.println("EntDef :" + entDef.getFileName() + " : " + entDef.getBasePackage() + ".dynamic." + entDef.getName());
entDef.setAliasName(entDef.getName());
entDef.setSource("DEPT");
entDef.setSourceType("table");
entDef.addAttribute("ID", "ID", Integer.class, true, false, true);
entDef.addAttribute("Name", "NAME", String.class, false, false, true);
entDef.addAttribute("Location", "LOCATION", Integer.class, false, false, true);
entDef.resolveDefObject();
entDef.registerSessionDefObject();
entDef.writeXMLContents();
entDef.saveXMLContents();
return entDef;
} catch (Exception ex) {
System.out.println(ex.getLocalizedMessage());
return null;
private ViewDefImpl buildDeptViewSessionDef(EntityDefImpl entityDef) {
try {
ViewDefImpl viewDef = new oracle.jbo.server.ViewDefImpl(oracle.jbo.server.ViewDefImpl.DEF_SCOPE_SESSION, "DynamicDeptViewDef");
viewDef.setFullName(viewDef.getBasePackage() + ".dynamic." + viewDef.getName());
System.out.println("ViewDef :" + viewDef.getFileName());
viewDef.setUseGlueCode(false);
viewDef.setIterMode(RowIterator.ITER_MODE_LAST_PAGE_FULL);
viewDef.setBindingStyle(SQLBuilder.BINDING_STYLE_ORACLE_NAME);
viewDef.setSelectClauseFlags(ViewDefImpl.CLAUSE_GENERATE_RT);
viewDef.setFromClauseFlags(ViewDefImpl.CLAUSE_GENERATE_RT);
viewDef.addEntityUsage("DynamicDeptUsage", entityDef.getFullName(), false, false);
viewDef.addAllEntityAttributes("DynamicDeptUsage");
viewDef.resolveDefObject();
viewDef.registerSessionDefObject();
viewDef.writeXMLContents();
viewDef.saveXMLContents();
return viewDef;
} catch (Exception ex) {
System.out.println(ex.getLocalizedMessage());
return null;
private void addViewToPdefApplicationModule(ViewDefImpl viewDef) {
oracle.jbo.server.PDefApplicationModule pDefAM = oracle.jbo.server.PDefApplicationModule.findDefObject(getDefFullName());
if (pDefAM == null) {
pDefAM = new oracle.jbo.server.PDefApplicationModule();
pDefAM.setFullName(getDefFullName());
pDefAM.setEditable(true);
pDefAM.createViewObject(DYNAMIC_DETP_VO_INSTANCE, viewDef.getFullName());
pDefAM.applyPersonalization(this);
pDefAM.writeXMLContents();
pDefAM.saveXMLContents();
////////adf-config.xml//////////////////////
<?xml version="1.0" encoding="windows-1252" ?>
<adf-config xmlns="http://xmlns.oracle.com/adf/config" xmlns:config="http://xmlns.oracle.com/bc4j/configuration" xmlns:adf="http://xmlns.oracle.com/adf/config/properties"
xmlns:sec="http://xmlns.oracle.com/adf/security/config">
<adf-adfm-config xmlns="http://xmlns.oracle.com/adfm/config">
<defaults useBindVarsForViewCriteriaLiterals="true"/>
<startup>
<amconfig-overrides>
<config:Database jbo.locking.mode="optimistic"/>
</amconfig-overrides>
</startup>
</adf-adfm-config>
<adf:adf-properties-child xmlns="http://xmlns.oracle.com/adf/config/properties">
<adf-property name="adfAppUID" value="TestDynamicEC-8827"/>
</adf:adf-properties-child>
<sec:adf-security-child xmlns="http://xmlns.oracle.com/adf/security/config">
<CredentialStoreContext credentialStoreClass="oracle.adf.share.security.providers.jps.CSFCredentialStore" credentialStoreLocation="../../src/META-INF/jps-config.xml"/>
</sec:adf-security-child>
<persistence-config>
<metadata-namespaces>
<namespace metadata-store-usage="mdsRepos" path="/sessiondef/"/>
<namespace path="/model/" metadata-store-usage="mdsRepos"/>
</metadata-namespaces>
<metadata-store-usages>
<metadata-store-usage default-cust-store="true" deploy-target="true" id="mdsRepos">
<metadata-store class-name="oracle.mds.persistence.stores.file.FileMetadataStore">
<property name="metadata-path" value="/tmp"/>
<!-- <metadata-store class-name="oracle.mds.persistence.stores.db.DBMetadataStore">
<property name="jndi-datasource" value="jdbc/TestDynamicEC"/>
<property name="repository-name" value="TestDynamicEC"/>
<property name="jdbc-userid" value="adfmay28"/>
<property name="jdbc-password" value="adfmay28"/>
<property name="jdbc-url" value="jdbc:oracle:thin:@localhost:1521:XE"/>-->
</metadata-store>
</metadata-store-usage>
</metadata-store-usages>
</persistence-config>
</adf-config>
//////////////////////////////////////////////////////////////////////////////////////////////////////////Hi Frank,
I m trying to save entity and view object xml by calling writeXMLContents() and saveXMLContents() so that these objects can be retrieved using the xmls later on.
These methods internally use MDS configuration in adf-config.xml, which is creating the issue.
Please share your thoughts on resolving this or if, there is any other way of creating dynamic entity/view objects for db tables created at runtime.
Nik
Maybe you are looking for
-
Hyper-V Guest Disk Configuration and SAN placement
In a nutshell, I have a test 2012 R2 cluster (2-node) attached by fibre to a SAN. The SAN at present is configured with 2 volumes, one RAID 10 and the other RAID 5. 2 questions really. Is it best practice for each guest to have 2 virtual hard disks
-
When watching a rented movie, it just stops and we have to wait for it to reload
When watching a rented movie, the movie pauses and we have to wait for it to reload. is there anything that we can do to stop this?
-
Hi I have a performance issue with OWB. OWB 9.0.4.8.21 Oracle 9.2.0.1.0 I designed some mappings with business rules/ transformations on windows system (AMD athalon, 1*1.8 Ghz CPU, 1 GB ram) . When I run these mappings, my CPU usage goes to 100 % whi
-
Integration of configuration object__urgent!!!
I need to integrate a configuration object in SIM 5.0 but I am not getting any head or tail of it of how to do it. I need it urgently to integrate it. Any suggestions in this matter will be really welcome. Thanks in advance resh
-
Why can't my kids get their own Apple ID?
2 iPhones, 4 iPods, 2 Mac book in the house - why can't my kids have their own ID for their own devices?