ASO and the "^" operator

I am working with an ASO application. In the accounts dimension (dynamic) I tried to use the "^" (non consolidation operator) on a percentage. It doesn't work it still aggregates on other dimensions. While "+" and "~" are the only operators for stored I can find no documentation saying that the "^" operator is excluded. In addition it is accepted and the outline reflects that the members have this consolidation set.
Has anyone any information on this? If not I'll open a case with Oracle.

Right - I appreciate that you're setting the property on a member in a dynamic hierarchy, but what I'm saying is that given how ASO processes upper-level queries I don't see how that property could possibly be respected when aggregating up the stored hierarchies.
That's exactly what you're seeing and what I saw in my testing - actually, I don't think I could even make it work across multiple dynamic hierarchies (which ought to be possible). And yes, I also agree that this behaviour is not reflected in the documentation. Annoying!

Similar Messages

When restoring an iPhoto library I got an "unexpected error" message and the operation could not be completed. Is my best choice to try again?

One of my external hard drives died. I had several iPhoto libraries in it. Fortunately, I used Time Machine to backup to a Time Capsule and I can see all the iPhoto library icons in Backups.
When restoring the first iPhoto library, after three hours, I got an "unexpected error" message and the operation could not be completed. Indeed, the restored library is smaller than the library in Backups. Is my best choice to try again and replace the restored library (which apparently must be missing some photos)? It would mean another 3 hours plus of restoration with fingers crossed...
Any suggestions? Thank you in advance!

I am always suspicious of using a different OS to the one that was used to run the backup.. ie if you used Snow L to backup then there is absolutely nothing wrong with using SL to restore.
Mount the TC sparsebundle and verify it using disk utility.
A5 here. http://pondini.org/TM/Troubleshooting.html
You might also like to load the widget in Time Machine so you get whatever the full error message is..
I cannot find any reference to the error code you are getting..
My recommendation would be to try it on a different computer.. restore the whole backup to an external drive large enough to accept the whole backup.
Use the manual methods pondini recommends.
http://pondini.org/TM/FAQ.html
Q16 17
Use ethernet only. Turn off wireless so it does not enter the situation.

Out of scope error while attaching the attribute set and the operating unit

Hi,
Am getting the out of scope error when am trying to attach the attribute set "/oracle/apps/fnd/attributesets/HrOperatingUnits/OperatingUnitName_Transient"
and the operating unit lov "/oracle/apps/fnd/multiorg/lov/webui/OperatingUnitsLovRN" from my page in JDeveloper.
Can anyone help?
Thanks

Mostly
It would just be a warning message you can proceed with it there are no issues.But if its an error please do as mentioned by Reetesh.
Thanks
AJ

Is there any way that I can get back my iPhoto? After having hard disk replaced (no backup) and the operating system has been updated to Lion (no disc) I am wondering if iPhoto can be reinstalled with my Leopard discs?

Is there any way that I can get back my iPhoto? After having hard disk replaced (no backup) and the operating system has been updated to Lion (no disc) I am wondering if iPhoto can be reinstalled with my Leopard discs?

As Niel pointed out, yes. The disk probably will look like the MBP disk (4) in this screenshot;
OT

HT4623 i have 4s and the operating system is iOS 5.1.1 got the update message of iOS 6. if update the iOS 6, other functions will work unchanging?

I have apple 4s and the operating system is iOS 5.1.1 got the update message of iOS 6. if update the iOS 6, other functions will work unchanging?

What other functions?
There have been some wifi related issues reported with the 4S being updated to IOS 6. There is no turning back once you update so keep that in mind.
I recommend updating via iTunes so that you make a backup of all your data. You may want to make an iCloud backup as well.
Other than that, I don't understand what other functions you are concerned about?

HELP! problem after update OS & email accounts msg 'there was an unexpected error and the operation was cancelled'

Hello I hope someone can help as i am very upset my BB10 is not functioning.
I have had this handset 3 months & love it!
I updated the OS and now on 10.1.0.4181... I had to do a memory swipe as handset working fine until update then it would not make or receive calls hence the swipe also cleaned up emails etc.
Now when I come to add the email accounts which it allows but no emails are received.. I keep getting this
message 'there was an unexpected error and the operation was cancelled.'
I used to have 2 x virgin media email addresses, 1 x hotmail.co.uk & 1 x [email protected] email address linked to Z10
handset and worked perfect..
What has happened to my phone.. I so need it to operate as before as I use it for work (self employed)
On the settings the virgin emails will sometimes say not connected.
I can use the internet & apps ok & text.. but I love the hub and that is not working like it did...
Can someone please help & advise before I send it to a watery grave...Thanks

Thanks for the reply
Can I get you to manually add the live.co.uk email account by changing the incoming mail server to one of these servers: blu-m.hotmail.com, dub-m.hotmail.com, stn-m.hotmail.com, bay-m.hotmail.com, col-m.hotmail.com or snt-m.hotmail.com.
Then try to add it, let me know if the issue persists.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Which table contains the Workcenter and the operation line of an order

Hello
Does someone knows in which table I can found the link between the operation defined in a maintenance order and the workcenter? If there is no direct link in a table, is there a function allowing me to do it?
Kind regards
Chris

Chris,
AFVC and AFVV contain most of the operation data.
The link is:
AFKO-AUFPL --> AFVC-AUFPL
AFVC-AUFPL/APLZL --> AFVV-AUFPL/APLZL
See [here|http://www.sapfans.com/forums/viewtopic.php?t=200474] for more PM/CS tables
PeteA
[www.pjas.com]

Why won't msword open on my macpro says it is not supported and the operating system is OS x

Why won't MS word open on my MacPro. Operating system is OS X (OS 10.6.8) and computer tells me the application is not supported?

Are you sure you're running 10.6.8 and not Lion (10.7)? That sounds like what happens when you try to launch a Motorola (G4/G5) app on an Intel system running Lion since they removed the emulation layer.

I am trying to uninstall Photoshop Elements 8 on a Windows 7 Computer, and the operation freezes.

I have tried repeatedly to uninstall Elements 8, which never seemed to work fully on my computer. The message is "Error 1316. The Specified Account already exists." I am trying to uninstall the earlier version so that I can install Elements 12.

Well, not exactly. A couple of things: if you got PSE bundled with a scanner or something, then yeah, you probably got both platform versions. Otherwise, standalone versions of PSE 8 were single-platform--mac serial numbers don't work in windows and windows serial numbers don't work for macs.
Also, there is no organizer in PSE 8/mac. It came with bridge instead. Bridge can read metadata keywords, but not organizer catalogs, and PSE 8 mac would not understand an organizer backup. Even with later versions after adobe started including organizer for macs, you would need at least PSE 9 in windows for the mac version to understand it.

Relating sub equipment and the operation

Hi All,
How can i relate the sub equipment with operation of a PM order ? I am getting the the order details through "BAPI_ALM_ORDER_GET_DETAIL" but nor able to make out which operation/activity corresponds to which sub-equipment.
Please help.
Thanks,
Nagraj

It appears that you cannot determine which equipment belongs to which operation via the data in this BAPI
You would need to do some post-processing.
PeteA

I have an IPad2 and the operating system is 8.2 . I use wifi and when I attempt to go on line I receive a full strength signal which indicates I am on line but when I try to GO On Line I receive a message( you appear to be off line) . I am writing e

MY I pad indicates that Inhave a full strong Wifi signal
but when I attempt to go on line via Safari or any of my apps I receive a response ( it appears you are off line)
my my wife has also identical IPad using the same user name and ID and she is not experiencing any similar problems
could you please help

Try rebooting your modem.
Unplug both your modem and your wireless router.
Plug modem back in and wait a good 3 minutes for modem to completely boot up.
Then plug your wireless router back in and wait another 2 minute for that to boot up.
Then turn iPad off and back on.
Make sure you and you wife are on the same network
Hope it works.

I am on vacation and I am unable to get internet connection using my Powerbook G4 (with built-in Airport). It is only showing a WPA Personal for the wireless security option and the resport password is being rejected. How can I get connected?

I need some help trying to get connected from a remote location with my Powerbook. I am a graphic designer on vacation and need to keep in touch with my clients. Need help ASAP!

Looks like you are working with a vintage product and the operating system is a little outdated, which makes it harder to troubleshoot. It's possible that it doesn't support WPA (depending on the Airport card built-in). Otherwise, if you can connect via ethernet, check for software updates. It even might be as simple as restarting the computer.

Is it possible to grant datasource resume actions to the Operator role?

Hi gurus,
I'm trying to grant the JDBC datasource suspend/resume action to the 'Operator' role. I understand this is an admin task and the 'Operator' role cannot do this. I've tried to edit weblogic.management.runtime -> JDBCDataSourceRuntime -> suspend/resume policy Mbean via the JMX editor and added the Opertor role in a new policy, but I haven't been successful.
Is it possible to provide a user with a script (which can run as an Admin user), without providing the admin credentials to an operator user, so that he can resume a suspended data source?
Thanks.

Hello,
theoretically you could remove the domain admins from the local administrator group. BUT this you should first test in a lab to see what happens after removal on the SCOM server.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

The Operating System returned Error 27(The drive cannot find the sector requested.)

On a Windows 2008 R2 server running SQL 2008 Standard on a Raid 5, when performing a backup on the databases via copy to another local drive I receive and The operating system returned error 27(The drive cannot find the sector requested.) to SQL Server during
a write at offset 0x0000002fd204000 in the file F:\SQLDATA\Email_Images.mdf. The server is a HP DL380p Gen8. I've contacted HP thinking this was a Hardware issue but HP ensure me its not and to contract Microsoft support.

Hi,
Unfortunately, the available information is not enough to have a clear view of the occurred behavior. Please offer us what backup method you are using, did you want to backup
the data to the CSV, the origional error you have got.
1. The best method would be to have separate disk drive for each cluster SQL instance and add the disk to the specific SQL group and add it to the dependency of the SQL resource.
There would be less overhead with this process other than having to create two disks, one of each instance
2. You could consider creating a file sharing resource on cluster and add the backup disk to this resource group and use it to back up the databases of both the instances
to single disk. The down side of this method would be, all the databases backups will fail if the fileshare resource goes down. You cannot use GUI to take the backup, need additional setup/maintenance for the fileshare resource group
http://support.microsoft.com/kb/224967
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I am unable to download the programs onto my laptop. I keep getting a message that says the operating system no longer supports the programs.

I need help, i am not sure what operating system needs to be installed. I have a mac and the operating system is up to date.

Creative Cloud programs are not spec'd to work with Mac OS X 10.6.8. You would have to upgrade to at least version 10.7. You should check the system requirements for all of the programs you wish to install to see what the minimum is that would cover all of them. Just Google "InDesign system requirements" to find them for InDesign, and repeat for the other programs using their names instead of InDesign.

ASO and the "^" operator

Similar Messages

Maybe you are looking for