Aspect Ratio Change

On a couple of the digital convertor boxes that I have the aspect ratio has changed. How do I adjust this to fill the screen. This is a Comcast feed issue, I sure.

kimosabe23 wrote:
On a couple of the digital convertor boxes that I have the aspect ratio has changed. How do I adjust this to fill the screen. This is a Comcast feed issue, I sure.The aspect ratio is a function of the TV... not of Comcast....  if your TV does not support changing the Aspect, then you may want to invest in a newer model. -=Ray=-

Similar Messages

  • Aspect ratio changes?

    I have edited a short film shot entirely in 16:9 on a 4:3 timeline (unaware I was doing so). So when I export my "widescreen" film, it is a 4:3 video with black bars on the top and bottom. So what I thought was if I create a new project, use "DV-NTSC Anamorphic" with the Easy Setup option, and create a new sequence, my entire film will no longer have black bars at the top and bottom. It will just be a 16:9 video. Well, I was wrong. In the new setup, every single clip is "squished", and it looks like if I wanted to fix it, I'd have to go through every single clip, re-import it, and have an adjusted aspect ratio... and I don't want to do that. Is there an easier way?

    How is the Aspect Ratio changing?
    Was the shooting Mode changed on the camera, between scenes, say from Standard to Widescreen? That would be a change in PAR (Pixel Aspect Ratio), but would show up the difference in the Project.
    Also, are you in PAL-land, or NTSC-land?
    Good luck,
    Hunt
    Hi Hunt, no the shooting mode was the same - wide screen, dv cam pal

  • Pasting problem between sequences. Aspect Ratio changes. Help

    Hi. I'm fairly new to FCP so be patient with me. I shot HD using the Panasonic format 1080i. I transferred the footage from the SDHC cards using Apple Pro Res 422, 1920x1080. Everything was going fine in editing until I tried to copy and paste clips from one sequence in the timeline into another sequence. The aspect ratio changed in the clips I pasted. I tried to figure out what to do by looking at Sequence Settings and Clip Properties but to no avail.
    Any suggestions? I am building separate sequences and then need to paste these together to make a QT movie or DVD for client so need help asap. I've previously worked with JVC HD cams using the 720p24 codec and never had this trouble when cutting and pasting.
    Help!!

    This is not weird at all. One sequence is set to use square pixels (1920x1080) the other is using non-square pixels (1440x1080).
    You need to fix the non-square pixel timeline.
    The simplest to understand method to fix the non-square sequence issue is to create a new sequence with the proper settings then copy your material over from the non-conforming sequence.
    To get a new sequence with the proper settings (if you have FCP7) all you need to do is "create new sequence" then drop one of the clips into the new empty timeline. If the settings do not match, when the program asks you if you want to change the sequence to match the clips, say yes.
    Then select all the clips in the non-conformed timeline and copy and past them in the new correct timeline.
    x

  • Aspect ratio changes in PPro CS4

    Adobe Premiere Pro CS4
    When I export a project to a final video, the aspect ratio changes at different points in the video for no apparent reason.  These videos are typically under 10 minutes in length.  I use the same camera without changing any settings for every project and capture to PPro CS4 using the same settings for every project and using the same hardware.  And yet, I end up with different aspect ratios across a single video.  I have no idea why.  Some of my output clips have never had any titles, special effects, imported clips, or anything else that I think might cause a change in aspect ratio.
    Can someone shed some light on this for me?
    Thanks,
    Dan

    Thanks, Stan.
    I just posted a draft video on Youtube for a client last night.  Not sure if viewing a clip of what I see will help you but I suspect it will.
    http://www.youtube.com/watch?v=v_hzhCeCGR0
    If you go to about 4:34 in the clip you'll see it change over to a different aspect ratio.
    This sequence was exported directly from PPro CS4 to FLV.  The FLV file was uploaded to Youtube.
    I'm editing this morning and just came across this same issue again.
    I'm amazed that none of my clients have mentioned it yet.  Of course, I'm not making Hollywood movies - these are just short videos people send out to college coaches.
    Thanks,
    Dan

  • What is the fix for constarined crop aspect ratio changing when the image is rotated

    I've migrated through LR 3, 4 and now 5 up to 5.4. I have been able to set a crop aspect ratio and synch pictures to that ratio as well as other editing selections. When I edit a particular picture and rotate it , the aspect ratio has stayed constant - to the value originally selected.I've never had a problem and it has consistantly worked properly even through last weeks editing activities. Now, when I set aspect ratio and then rotate, the aspect ratio really changes. If I go back and reset aspect ratio and select Done, it seems to be ok. This issue seems to perform wrong with portrait orientation but not in the landscape orientation. I have uninstalled LR, gone through registry cleanup, reinstalled LR, claened up the registry but nothing gets better. I do note that the settings aren't totally removed as the reinstalled software wants to pick up where I left it prior to uninstalling. As best as I can tell, all of my settings and preferences are the same as last week. It works on last weeks folders but not on new ones.
    I have now seen many forum write-ups about this problem but have never found any solution. Help - I can't go through life cropping and straightening images sideways.

    Here is a thread that I think addresses this problem.  There were MULTIPLE bugs in the crop tool when Lr5.0 came out, probably due to adding the Upright Tool, but they are slowly getting worked out.  Maybe this one will be fixed in Lr 5.5
    http://forums.adobe.com/message/6218903#6218903

  • Monitor: in CS2 how do I handle 4:3 to 16:9 aspect ratio change?

    Hi, my first post here, so please be kind.
    I have used Photoshop 9 successfully for several years using a conventional 4:3 aspect ratio CRT monitor.   I have just upgraded to a flat screen monitor which has a native resolution of 1920 x 1080pixels with a 16:9 aspect ratio.
    I resized the Photoshop window to fill the new screen but transferring photographs from Adobe Bridge they were stretched horizontally.
    This is the first time I have ever changed the format of my monitor and feel that somewhere in Photoshop there must be a feature which accommodates such a change; though I have spent serious time looking.
    I can get the image to display properly by changing the Pixel aspect ratio, but I am certain that would result in saving a distorted image.
    Please what do I need to do?
    Gordon

    You're in luck, there's a pretty easy solution for this:
    You must change your Windows desktop resolution to exactly match the "native" resolution of the new monitor, which is 1920 x 1080 in this case.
    Usually you will be offered that choice automatically, but in some cases you'll need to "install" from a CD or downloaded information about the monitor.
    There may also be some on-monitor controls you'll need to review to ensure it's showing the full 1920 pixels in width.
    What version of Windows are you running, and what model of monitor is it, specifically?
    -Noel

  • Cropping aspect ratio changes randomly

    Each time I crop a new image, the aspect ratio seems to change randomly. Sometimes it will pop up as "Do Not Constrain." Sometimes it will appear as 4x5. Or 2x3. Etc. You get the idea. I have no idea why it's changing. It's very disruptive to the workflow. Any thoughts on what might be causing this?
    I encounter the issue on both my MacBook Pro and my iMac.

    Thanks, Stan.
    I just posted a draft video on Youtube for a client last night.  Not sure if viewing a clip of what I see will help you but I suspect it will.
    http://www.youtube.com/watch?v=v_hzhCeCGR0
    If you go to about 4:34 in the clip you'll see it change over to a different aspect ratio.
    This sequence was exported directly from PPro CS4 to FLV.  The FLV file was uploaded to Youtube.
    I'm editing this morning and just came across this same issue again.
    I'm amazed that none of my clients have mentioned it yet.  Of course, I'm not making Hollywood movies - these are just short videos people send out to college coaches.
    Thanks,
    Dan

  • Aspect Ratio Change in FCPX?

    Hi.
    I'd like to change the native aspect ratio in a 6sec clip from 16x9 to 2.35:1 in FCPX so the bars appear at the beginning of the clip and slowly close in, reaching 2.35:1 at the end of the clip.
    Anyone know how this is done?
    Thanks

    Create a 2.35 project using Custom settings.
    Drop your 16:9 clip into the timeline.
    Activate the Transform tool to get a bounding box.
    Set a key frame.
    Move the playhead to where you want the image to fill the frame.
    Scale up the image to fill the frame.
    Russ

  • Aspect Ratio changes after the project was reopend

    hello everyone,
    I have a project with mov-files with apect ratio 1,0, I wanted to change them to 1,33, so I went to interpret footage and change it to 1,33. Then I synchronized the mov-files with audio and made merged clips (all in 1,33). After that I saved the project and open it again and then the original mov-files are back to 1,0, the merged clips are in 1,33, but with a 1,0 footage (so the clips have black bars left and right). Does someone know what could be the problem? Am I doing something wrong so the footage won`t stay in new aspect ratio?

    Did you check the box?: Re: Premiere Pro CC - interpreted footage reverts to original framerate

  • Aspect ratio changes when editing

    I've imported a number of clips DV-format widescreen 16:9.
    They look fine and I can put them togehter as a project.
    However when I delete parts of a clip when they reside in the event library (lower part of the iMovie 08 window). The remaining parts of the clip change into 4:3 aspect ratio. Untouched clips (from the same import) stay in 16:9
    The clip-parts that are already in the projectlibrary stay ok in 16:9
    I am doing something wrong or did I ran into a bug ?
    Thx
    Ben
    Message was edited by: Ben Bloks

    My edited clips changed to .mov. The deleted ones were already altered, so I am not sure wether that's the result of the editing (which is logic) or from the deletion (sounds strange to me). The untouched clips still have .DV and again that makes sense.
    Ben

  • Re: Aspect Ratio changes Mid Shot ?

    After cutting a 20 minute film on FCP exporting through Compressor 3.0 and finishing on DVDSP the final film looks great except it changes Aspect Ratio intermittantly and very randomly. Orignally I thought it changed from 4:3 to 16:9 but the Aspect changes are more subtle; like 4:3 to 5:4
    The FCP Settings are
    Frame Size - 720 x 576 Aspect Ratio CCIR 601 / DV PAL (5:4)
    Pixel Aspect Ratio - PAL CCIR 601 (720 x 576)
    Field Dominance - Lower (Even)
    25 fps (I'm in Australia)
    The Compressor Settting are (and this is SD DVD by the way)
    Format - M2V
    Width & Hieght - Auotmatic
    Selected : 720 x 576
    Pixel aspect ratio - PAL CCIR 601
    Crop: None
    25 fps
    Aspect Ratio : Automatic
    Selected: 4:3
    Field Dominance: Auto
    Selected: Bottom first
    Average data rate: 6.2 (Mbps)
    2 Pass VBR enabled
    Max data rate: 7.7
    High Quality
    Best Motion estimation
    Any clues as to what I'm doing wrong with Compressor?
    Thanks in anticipation,
    Marv

    I solved my own question by exporting the project first as a QuickTime movie (not self-contained which is much slower & unnecessary for this task). I then put this through Compressor. Problem solved.
    I found this answer by reading about similar questions on this forum & viewing a few tutorials on Compressor. Grateful thanks to this fantastic forum that seems tp answer any query I put to it.
    Marv

  • Aspect Ratio change in Adobe Premiere Pro

    Hello all, I am completely new to APP editing so this might seem like a very obvious question. My source footage is in 16:9 and it seems like the timeline image is in 4:3 and therefore a part of the image is cut off. I changed the Pixel Aspect Ratio in Sequence Settings to 16:9 but the image is still cut off in the Program window. I am working on a Macbook Pro and have APR CC 2014. Thank you in advance for you help!

    Hello Richard, thank you for your response. I just tried that, changing the Pixel Aspect Ratio in Sequence Settings to 16:9. The screen size changed but the image itself is still cropped. Is there something else I need to modify in the Settings window of the new sequence in order to have the image fit the screen? Thank you so much!

  • Title tool problem - aspect ratio changing

    I'm having a bit of trouble with the title tool in premiere pro cs6. I've never had this happen before. I've got my video in the timeline and it is displayed and edited to the correct aspect ratio (4:3) but when I bring up the title tool to add text over it the video changes aspect ratios to that of a mobile phone vertical (9:16ish). I've attached an image that shows what I'm having trouble with. Any help is appreciated!
    http://i.imgur.com/tlK1CCn.jpg

    If you open a new the title you are presented with a dialog box with the heigth and width and aspect ratio.
    Check it that is the same as your timeline.
    Existing titles you can check in the project window or clip info.

  • Can aspect ratio changed?

    I'm importing from a Canon Vixia HF20 that exports a 16:9 aspect ratio. I would like to export my movie from FCP X in 4:3. Can't find out how to do this. Can I? (The Canon can't be changed, I don't think...)

    Make a standard defintiion 4:3 project and edit your material into it.

  • Aspect Ratio changes Mid Shot ?

    After cutting a 20 minute film on FCP exporting through Compressor (2 pass VBR) and compiling on DVDSP with an Aspect Ratio 4:3 and Standard Definition resolution, everything about the playback of the resulting DVD is fabulous except the it jumps (intermittantly) from 4:3 to 16:9.
    Any clues how to remedy this problem?
    Thanks in Anticipation,
    Marv

    Dang, I feel a little silly.
    I've just worked out this is a compression problem.
    I'll now put it to the hard core Compressor Users on their pages.
    Thanx
    Marv

Maybe you are looking for