Aspect Ratio changes after the project was reopend

hello everyone,
I have a project with mov-files with apect ratio 1,0, I wanted to change them to 1,33, so I went to interpret footage and change it to 1,33. Then I synchronized the mov-files with audio and made merged clips (all in 1,33). After that I saved the project and open it again and then the original mov-files are back to 1,0, the merged clips are in 1,33, but with a 1,0 footage (so the clips have black bars left and right). Does someone know what could be the problem? Am I doing something wrong so the footage won`t stay in new aspect ratio?

Did you check the box?: Re: Premiere Pro CC - interpreted footage reverts to original framerate

Similar Messages

What is the fix for constarined crop aspect ratio changing when the image is rotated

I've migrated through LR 3, 4 and now 5 up to 5.4. I have been able to set a crop aspect ratio and synch pictures to that ratio as well as other editing selections. When I edit a particular picture and rotate it , the aspect ratio has stayed constant - to the value originally selected.I've never had a problem and it has consistantly worked properly even through last weeks editing activities. Now, when I set aspect ratio and then rotate, the aspect ratio really changes. If I go back and reset aspect ratio and select Done, it seems to be ok. This issue seems to perform wrong with portrait orientation but not in the landscape orientation. I have uninstalled LR, gone through registry cleanup, reinstalled LR, claened up the registry but nothing gets better. I do note that the settings aren't totally removed as the reinstalled software wants to pick up where I left it prior to uninstalling. As best as I can tell, all of my settings and preferences are the same as last week. It works on last weeks folders but not on new ones.
I have now seen many forum write-ups about this problem but have never found any solution. Help - I can't go through life cropping and straightening images sideways.

Here is a thread that I think addresses this problem. There were MULTIPLE bugs in the crop tool when Lr5.0 came out, probably due to adding the Upright Tool, but they are slowly getting worked out. Maybe this one will be fixed in Lr 5.5
http://forums.adobe.com/message/6218903#6218903

Aspect Ratio changes after relocating files

When I put my video files on a mybook for backup and after reconnecting the media something strange happened. I lost a part of my picture, as if the image has been zoomed in. How can I get my original image back?
All this using Final Cut Express 4.0.1
Message was edited by: guy van der Hoop

Yes they have, unfortunately. So it must be some other setting, but I still haven't found which one....

Can PI objects (such as data type) name been changed after the object was

activated?
Again I am new to PI and not aware lots of PI rules
I would like to express my appreciation first here

Yes, it can be. And that is almost same for all SAP objects. I would suggest that instead of posting threads first, go through the existing threads and documents on SCN and try to play with the your sandbox or dev system.
Regards,
Prateek Raj Srivastava

Pasting problem between sequences. Aspect Ratio changes. Help

Hi. I'm fairly new to FCP so be patient with me. I shot HD using the Panasonic format 1080i. I transferred the footage from the SDHC cards using Apple Pro Res 422, 1920x1080. Everything was going fine in editing until I tried to copy and paste clips from one sequence in the timeline into another sequence. The aspect ratio changed in the clips I pasted. I tried to figure out what to do by looking at Sequence Settings and Clip Properties but to no avail.
Any suggestions? I am building separate sequences and then need to paste these together to make a QT movie or DVD for client so need help asap. I've previously worked with JVC HD cams using the 720p24 codec and never had this trouble when cutting and pasting.
Help!!

This is not weird at all. One sequence is set to use square pixels (1920x1080) the other is using non-square pixels (1440x1080).
You need to fix the non-square pixel timeline.
The simplest to understand method to fix the non-square sequence issue is to create a new sequence with the proper settings then copy your material over from the non-conforming sequence.
To get a new sequence with the proper settings (if you have FCP7) all you need to do is "create new sequence" then drop one of the clips into the new empty timeline. If the settings do not match, when the program asks you if you want to change the sequence to match the clips, say yes.
Then select all the clips in the non-conformed timeline and copy and past them in the new correct timeline.
x

Aspect ratio changes?

I have edited a short film shot entirely in 16:9 on a 4:3 timeline (unaware I was doing so). So when I export my "widescreen" film, it is a 4:3 video with black bars on the top and bottom. So what I thought was if I create a new project, use "DV-NTSC Anamorphic" with the Easy Setup option, and create a new sequence, my entire film will no longer have black bars at the top and bottom. It will just be a 16:9 video. Well, I was wrong. In the new setup, every single clip is "squished", and it looks like if I wanted to fix it, I'd have to go through every single clip, re-import it, and have an adjusted aspect ratio... and I don't want to do that. Is there an easier way?

How is the Aspect Ratio changing?
Was the shooting Mode changed on the camera, between scenes, say from Standard to Widescreen? That would be a change in PAR (Pixel Aspect Ratio), but would show up the difference in the Project.
Also, are you in PAL-land, or NTSC-land?
Good luck,
Hunt
Hi Hunt, no the shooting mode was the same - wide screen, dv cam pal

Aspect ratio changes in PPro CS4

Adobe Premiere Pro CS4
When I export a project to a final video, the aspect ratio changes at different points in the video for no apparent reason. These videos are typically under 10 minutes in length. I use the same camera without changing any settings for every project and capture to PPro CS4 using the same settings for every project and using the same hardware. And yet, I end up with different aspect ratios across a single video. I have no idea why. Some of my output clips have never had any titles, special effects, imported clips, or anything else that I think might cause a change in aspect ratio.
Can someone shed some light on this for me?
Thanks,
Dan

Thanks, Stan.
I just posted a draft video on Youtube for a client last night. Not sure if viewing a clip of what I see will help you but I suspect it will.
http://www.youtube.com/watch?v=v_hzhCeCGR0
If you go to about 4:34 in the clip you'll see it change over to a different aspect ratio.
This sequence was exported directly from PPro CS4 to FLV. The FLV file was uploaded to Youtube.
I'm editing this morning and just came across this same issue again.
I'm amazed that none of my clients have mentioned it yet. Of course, I'm not making Hollywood movies - these are just short videos people send out to college coaches.
Thanks,
Dan

"Part of the project was not played" error

I just got a brand new iMac--double the number or processors and twice the RAM as the old one--and I keep getting this error in Garageband:
Part of the project was not played
This project has too many real instrument tracks to be played in real-time.
To optimize performance, see the 'Optimizing GarageBand performance' page in GarageBand Help.
This issue only rarely cropped up on my old machine, and it was usually because the computer was chugging away on too many projects at once. I am editing a podcast which has two (rather long) audio tracks.
I have quite all other applications.
I have fixed permissions.
I have tried from another user account.
I have deleted prefs files.
I have reinstalled Garageband.
Nothing is helping. This is very frustrating.
Any guidance you could give me would be EXTREMELY appreciated!
Thanks!
Evan

In my case, the culprit was backups and disk-related software eating large amounts of CPU.
I recently ran into this problem with a very small project. Even after locking all tracks, I could not record all the way through the project without getting "project not played".
One pattern I noticed was that I could never get through the whole project when Time Machine was backing up. So I turned off TM and tried again.
Even then, I couldn't get all the way through. Running Activity Monitor, I could see that WD's disk software (came with the My Book drive I use for backup), would periodically consume a big chunk of CPU, even though I wasn't using the WD disk... even if I dismounted the drive. So I uninstalled the WD software.
With this change, Activity Monitor shows ~0% CPU. TM can still give problems, so I shut it down when I record.
Now GB runs fine, even with multiple tracks unlocked.
Moral: use Activity Monitor to make sure something isn't chewing up too much CPU. It may be an intermittent load, which makes it harder to see. But a big burst in non-GB CPU activity can stop GB, even if the burst is brief.
~2010-vintage iMac, 8GB RAM, GB '11

16:9 aspect ratio "squashed after import

Hi all,
I have some QuickTime movie files all of which are 16:9 widescreen. They appear correctly in QT and I've checked the properties in the "Show Movie Properties" window.
However, when I import them into IM, the image is shrunk to 5:4 with black areas at the sides. IM Prefs are set up OK for Widescreen import & the auto letterboxing option is un-checked.
The settings are correct as movies imported from camcorder retain the widescreen sizing.
Can anyone please tell me why these QT files are shrunk after import?
Thanks,
TT

If you have the ASPECT RATIO set correctly in Project Properties, then the other thing to check would be the Rotate, Crop, Ken Burns Tool. Pick a clip in your project and open the Fit, Crop, KB tool. You can toggle between Fit and Crop. Fit will include the entire image, but add black bars as needed. Crop will force fit by cutting off the top and bottom if necessary. If your source footage has the same aspect ratio as your project, then Fit and Crop are the same.

I am trying to open a previous completed project made on premiere pro CC 2014. i am getting a message that says the project was made on a newer version and cannot be opened on my new computer. However i made the older project on the same premiere pro CC 2

I am trying to open a preciously completed project mad eon premiere pro CC 2014. I purchased a new computer and downloaded the same premiere pro cc 2014. However when i try to open my old project it says the project was made on a newer version and cannot open.
that makes no sense...i downloaded the same version of premiere pro CC...help please!

Hi,
Seems that you don't have the most recent version installed right now. After launching Premiere Pro go to Help > Updates and check if any updates are available.
Thanks,
Rameez

I have two versions of Pr, one is the latest 2014 and when trying to open a Pr2014 session, I get an error message saying the project was saved in a newer version and cannot be opened. Help

I have two versions of Pr, one is the latest 2014 and when trying to open a Pr2014 session, I get an error message saying the project was saved in a newer version and cannot be opened. Could there be an issue with an older Pr application on the computer? Please help!

You need to be very careful which project you open in which version.
For 2014 make sure its on 2014.1 build 81.

Project Server 2010 - Modification date and name of the person who made the last change in the project

Hello everybody
I'm with a doubt.
I got in the business
environment Project Server 2010 and
would like to get the publication date,modification
date and name
of the person who made
the last change in
the project. It is possible
to doby the native
resources or is
there any query in
SQL Server to perform a
query of this information.
Thank you.
Obrigado por contactar o fórum Microsoft Technet!

Hi Hezequias,
You can get the ProjectModifiedDate column in MSP_EPMProject_userView in the Reporting DB where you can
get the data based on the projectUID.
The "last saved" date in the draft DB (be aware that querying in the draft DB is not supported by MS).
For the "last modified by", I think it is not stored in any place.
But you can develop custom code upon publishing the project (Event BeforePublish), writing the current
date and username automatically into a custom enterprise field.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

The report generation toolkit didn't work after the vi was build to an application.exe

I write a VI using LabVIEW Report Generation Toolkit , it really works in the LabVIEW7.1 and 6.0 enviroment. but after the VI was build in to an application.exe, the LabVIEW Report Generation Toolkit didn't work even the application runs.
thanks for your help.

You might want to follow the procedure here:
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/86256a47004e16d186256a84004cb883?OpenDocument
(If the URL doesn't work, you can search for NI document ID: 2B87TVI8)
Dan

I had to upload itunes on a new computer and after the iphone was updated my music was not on my phone and i don't see any music on my itunes any suggestions

I had to upload itunes on a new computer and after the iphone was updated my music was not on my phone and i don't see any music on my itunes any suggestions

iTunes- How to move your music to a new computer
Syncing to a "New" Computer or replacing a "crashed" Hard Drive

I have upgrade to Ios5 but after the installation was complete I found that the App Store and Itune are displayed in French version

I have upgrade to Ios5 English version but after the installation was complete I found that the App Store and Itune are displayed in French version.

But the model no. of my iphone i.e A1303 is of 3GS as clearly mentioned here >> http://support.apple.com/kb/HT3939. Then how its become 3G.

Aspect Ratio changes after the project was reopend

Similar Messages

Maybe you are looking for