Aspect ratio changes when importing to FCE 4.0.1

I'm hoping someone with a better understanding of FCE will be able to help...
I have footage shot in 1920x1080 (16:9) format. I have the sequence set to any of the available 1920x1080 (16:9) formats via Easy Setup. Create a new Sequence with the correct settings. However when importing the footage into FCE it converts to a 1440x1080 (4:3) aspect ratio... This I understand is the anamorphic format of 4:3. What am I supposed to do so that when importing, the original format is not altered.

I do know what 4:3 is and what 16:9 is. First, understand that there is no HD format, none, that is 4:3. They are all widescreen. 1440 is a way of compressing the media to use a limited data rate more efficiently by applying it to a smaller frame size while maintaining the standard display size. The material is displayed at full widescreen. If you have 1440 material in FCE you have probably noticed that the canvas is not 4:3. The canvas is widescreen. That's the display size.
Actually HDV's native format is not 1920. The native format agreed by the HDV consortium is 1440x1080 for 1080i material. That's the compression size. The display size is 1920. HDV is normally shot and compressed to 1440x1080 in camera. That's the native size of the frame.
The HV20 is an HDV camera. The CX12 is not. It's an AVCHD camera. That's a different format. They are not the same, and they compress media in entirely different ways. HDV is an older format that compresses to MPEG-2. AVCHD uses H.264 in MPEG-4. Neither of them are production formats. They are both compression formats that were designed for delivery, compressing group of frames. In their original format they are almost impossible to edit, which is why FCE and other applications convert the media to a production format that uses individual frame compression so you can edit exact frames. HDV is either 1280x720 or 1440x1080 (displayed as 1920). AVCHD is either 1440x1080 or 1920x1080, both displayed as 1920x1080. You can also have 1280x720 AVCHD, though I don't know any camera that actually shoots that excellent format.
"The footage resides on my computer." Perhaps you'd bother telling us how you got it into your computer. What application did you use? Every application will handle the ingest of this media in a different way, consequently it may not work properly with this application. I assumed you used the application this forum is about to bring this material into your computer. Did you, or did you ingest it with something else? How did you get it into the computer for you to import in FCE? Once again the correct size for this material is very likely 1440x1080. That's the native size for HDV sequences that are 1080. In 4.0.1 you can have sequences that are 1920x1080. These are designed to accommodate that AVCHD material shot at 1920x1080. Not all AVCHD material is in that size, and frankly there is no real advantage to it, and probably some disadvantages as the same data rate has to be used for a largely frame size.
All this said, I'm not sure what you're hoping and waiting for.

Similar Messages

Aspect ratio changes when editing

I've imported a number of clips DV-format widescreen 16:9.
They look fine and I can put them togehter as a project.
However when I delete parts of a clip when they reside in the event library (lower part of the iMovie 08 window). The remaining parts of the clip change into 4:3 aspect ratio. Untouched clips (from the same import) stay in 16:9
The clip-parts that are already in the projectlibrary stay ok in 16:9
I am doing something wrong or did I ran into a bug ?
Thx
Ben
Message was edited by: Ben Bloks

My edited clips changed to .mov. The deleted ones were already altered, so I am not sure wether that's the result of the editing (which is logic) or from the deletion (sounds strange to me). The untouched clips still have .DV and again that makes sense.
Ben

What is the fix for constarined crop aspect ratio changing when the image is rotated

I've migrated through LR 3, 4 and now 5 up to 5.4. I have been able to set a crop aspect ratio and synch pictures to that ratio as well as other editing selections. When I edit a particular picture and rotate it , the aspect ratio has stayed constant - to the value originally selected.I've never had a problem and it has consistantly worked properly even through last weeks editing activities. Now, when I set aspect ratio and then rotate, the aspect ratio really changes. If I go back and reset aspect ratio and select Done, it seems to be ok. This issue seems to perform wrong with portrait orientation but not in the landscape orientation. I have uninstalled LR, gone through registry cleanup, reinstalled LR, claened up the registry but nothing gets better. I do note that the settings aren't totally removed as the reinstalled software wants to pick up where I left it prior to uninstalling. As best as I can tell, all of my settings and preferences are the same as last week. It works on last weeks folders but not on new ones.
I have now seen many forum write-ups about this problem but have never found any solution. Help - I can't go through life cropping and straightening images sideways.

Here is a thread that I think addresses this problem. There were MULTIPLE bugs in the crop tool when Lr5.0 came out, probably due to adding the Upright Tool, but they are slowly getting worked out. Maybe this one will be fixed in Lr 5.5
http://forums.adobe.com/message/6218903#6218903

Aspect ratio wrong when importing from QuickTime Pro

Movies shot with Cannon still camera came out sideways. I used QuickTime Pro used to rotate them. They then look fine. However, when I import them into iMovie HD6, they remain vertical but are flattened down. I am sure it's a settings thing but this recent PC convert needs help!

So you shot in "portrait" instead of landscape?
I hope these are 320X240 instead of 640X480 files.
Easiest fix it to create an all black image file and use it as a background in QuickTime Pro.
Make the image 640X480. Import with QT Pro.
Select all and Copy.
Switch to your 320X240 movie (now 240X320), select all and "Add to Selection & Scale (Edit menu).
Open Movie Properties window.
Highlight the video track and adjust its offset and dimensions. Set its track "layer number" lower than the image file layer number. Negative numbers can be used.
Once happy with the file export to DV Stream.
Use the .dv file in iMovie.

Unwanted aspect ratio change when copying

PSE 10
When copying from one image to another, the width of the selection reduces but the height remains the same. The resolution of both images is the same.

Try this:
In Editor, go to the expert tab.
Open picture B, the one you wish to select something from to add to another picture.
Use one of the selection tools, e.g. selection brush, lasso tool, to select the object. You will see an outline ("marching ants") once the selection is complete
Go to Edit menu>copy to copy the selection to the clipboard
Open picture A, then go to Edit>paste
Use the move tool to position object from picture B.
In the layers palette you should see picture A as the background layer, and object B on a separate layer.

Aspect ratio changes?

I have edited a short film shot entirely in 16:9 on a 4:3 timeline (unaware I was doing so). So when I export my "widescreen" film, it is a 4:3 video with black bars on the top and bottom. So what I thought was if I create a new project, use "DV-NTSC Anamorphic" with the Easy Setup option, and create a new sequence, my entire film will no longer have black bars at the top and bottom. It will just be a 16:9 video. Well, I was wrong. In the new setup, every single clip is "squished", and it looks like if I wanted to fix it, I'd have to go through every single clip, re-import it, and have an adjusted aspect ratio... and I don't want to do that. Is there an easier way?

How is the Aspect Ratio changing?
Was the shooting Mode changed on the camera, between scenes, say from Standard to Widescreen? That would be a change in PAR (Pixel Aspect Ratio), but would show up the difference in the Project.
Also, are you in PAL-land, or NTSC-land?
Good luck,
Hunt
Hi Hunt, no the shooting mode was the same - wide screen, dv cam pal

Shot in 4:3 aspect ratio, but when i capture it turns to widescreen format

I shot my footage in standard 4:3 aspect ratio, and when i import it the clip looks fine, but when i drag it to the timeline it goes into widescreen format, and i can't figure out why it is doing this. If i select the clip from my browser window and play it in my viewer window it plays fine in the 4:3 aspect ratio, but when i drag it to the timeline it goes to wide screen and it stays that way. Please help

Sounds like your sequence settings are off. If you hit command>0 (zero) you should be able to change them. One way to know they are off for sure is if when you drag your clip to the timeline you get the red line above it meaning it needs rendering. You should never have to render if your sequence settings are right.
In sequence settings make sure all your settings match the format of you clip. Frame Size, Pixel Aspect Ratio, Editing Timebase, and compressor. That should do it.
You could also just use the Easy Setup to change the whole project to match DV.

Aspect ratio changes in PPro CS4

Adobe Premiere Pro CS4
When I export a project to a final video, the aspect ratio changes at different points in the video for no apparent reason. These videos are typically under 10 minutes in length. I use the same camera without changing any settings for every project and capture to PPro CS4 using the same settings for every project and using the same hardware. And yet, I end up with different aspect ratios across a single video. I have no idea why. Some of my output clips have never had any titles, special effects, imported clips, or anything else that I think might cause a change in aspect ratio.
Can someone shed some light on this for me?
Thanks,
Dan

Thanks, Stan.
I just posted a draft video on Youtube for a client last night. Not sure if viewing a clip of what I see will help you but I suspect it will.
http://www.youtube.com/watch?v=v_hzhCeCGR0
If you go to about 4:34 in the clip you'll see it change over to a different aspect ratio.
This sequence was exported directly from PPro CS4 to FLV. The FLV file was uploaded to Youtube.
I'm editing this morning and just came across this same issue again.
I'm amazed that none of my clients have mentioned it yet. Of course, I'm not making Hollywood movies - these are just short videos people send out to college coaches.
Thanks,
Dan

Pasting problem between sequences. Aspect Ratio changes. Help

Hi. I'm fairly new to FCP so be patient with me. I shot HD using the Panasonic format 1080i. I transferred the footage from the SDHC cards using Apple Pro Res 422, 1920x1080. Everything was going fine in editing until I tried to copy and paste clips from one sequence in the timeline into another sequence. The aspect ratio changed in the clips I pasted. I tried to figure out what to do by looking at Sequence Settings and Clip Properties but to no avail.
Any suggestions? I am building separate sequences and then need to paste these together to make a QT movie or DVD for client so need help asap. I've previously worked with JVC HD cams using the 720p24 codec and never had this trouble when cutting and pasting.
Help!!

This is not weird at all. One sequence is set to use square pixels (1920x1080) the other is using non-square pixels (1440x1080).
You need to fix the non-square pixel timeline.
The simplest to understand method to fix the non-square sequence issue is to create a new sequence with the proper settings then copy your material over from the non-conforming sequence.
To get a new sequence with the proper settings (if you have FCP7) all you need to do is "create new sequence" then drop one of the clips into the new empty timeline. If the settings do not match, when the program asks you if you want to change the sequence to match the clips, say yes.
Then select all the clips in the non-conformed timeline and copy and past them in the new correct timeline.
x

Frame Rate change when importing video into FCP 5

I am importing an HD h264 file into FCP 5. The video when opened in QT shows that it's frame rate is 30fps, what I exported it at. When I Import the file into FCP 5 it changes the frame rate to 29.97fps, which is causing major video/audio syncing issues. Any thoughts on how to stop the frame rate change when importing? I tried changing my system settings and audio/video settings before the import to match the file and it is still picking it up at 29.97, major headache especially since I'm cutting industrial.

yeah I'm kinda limited, working with video for the web and I'm making revisions as to what has been already posted. The H264s are the originals per say as we are using a screen capturing program to obtain the video, I could re export the originals at a truer format, but with the resources I'm given, its not truly the option I can afford to take. I've found a workaround through using imovie of all things, but I rather be in FCP. I've done some editing with h264s before and this is the first time I've seen this happen, it kind of reminds me of when I had an editor a few years back digitize video that was drop frame as non-drop.

Has anyone ever got the message error occurred while converting the file - you do not have the privilege to make changes - when importing cps?

Has anyone ever got the message error occurred while converting the file - you do not have the privilege to make changes - when importing cds?

Hey amba1015,
I found an article that talks about similar error messages in relation to importing an audio CD. Check out the recommended troubleshooting steps in here to see if they help:
Trouble adding music to iTunes library or importing audio CD
http://support.apple.com/kb/TS1387
Welcome to Apple Support Communities!
Have a good one,
Delgadoh

Aspect ratio distortion when exporting iMovie '08 xml to FCE 4

Hi, I'm working on a small piece which I started in iMovie '08. Now that I have selected all the content for the piece I have attempted to "share" as Final Cut XML. However, when I import that file into FCE 4 the aspect ratio is all out of whack. Does anyone have suggestions about how to resolve, or place to look?
Thanks in advance for the help!

Found the answer here if anyone else has the same problem: http://discussions.apple.com/thread.jspa?messageID=10239568&#10239568

Why when I export does my aspect ratio change?

My camcorder is a Canon HDV 30 and any time I export a Quicktime movie using either current setting, compressor native or 1920/1080, the aspect ratio gets messed up...typically going 4:3.
Does anyone know what export setting you use so that the exact resolution and aspect ratio the camera shoots in...gets exported as that.

Ok, that makes sense. In fact I just did an export using 1440x1080 and it worked out perfectly. Thanks very much for all the information.
Just as a side note, what does it mean to display it as 1920x1080 when it's shot in 1440x1080? Why doesn't it display it as 1440x1080?
Thanks Tom,
Gregg

Aspect Ratio issue when replacing a clip in Premiere CS6 with an After Effects CS6 Composition

Please assist! When I attempt to right click on a clip in my Premiere timeline and replace it with an After Effects composition, I can do so, but problems ensue.
After Effects will start up, but the composition will be in 4:3, even though the Premiere project and clip that I'm altering were both 16:9.
I was able to change the aspect ratio to 16:9 in After Effects and then edit what I wanted, but an hour later when I had finsihed, saved, and gone back to Premiere, it had smushed the replaced clip into 4:3 within Premiere.
So to reitterate:
When I replace a clip in Premiere with an AE comp, AE opens in 4:3.
I can change the AE comp to 16:9, but when I save and go back to Premiere, it has smushed the AE comp down to 4:3.
What can I do to stop this?

If you right click on the clip in the Project panel, then select Modify / Interpret Footage you will see a Pixel Aspect Ratio.
What does it say?
If it says 0.9091 then change it to 1.2121
If it says something else, come back and let me know. I will then have a different answer for you.
Also, what is the frame size of the video.

Wrong aspect ratio of video imported to itunes

Imported video from eyetv to AppleTV has the incorrect aspect ratio in itunes but the correct aspect ratio in QT.
For example a file with dimensions 1024x576 is reported and plays 1489x576.
This problem was solved by installing Perian, but a recent update of itunes has restored the problem.

I have precisely the same problem. In the past (over the last year or less) I have used Perian to fix iTunes' incorrect display of video. The video has come from EyeTV export via Turbo.264 encoding but the latest update of iTunes (8.0.2) has "restored the problem". I have tried to reinstall Perian, but I'm not sure if I managed to fully remove it first. When "Remove Perian" is selected from the Perian Preference Pane, it doesn't fully remove it. The Perian Preference Pane remains......
Hopefully, a Perian update might solve this once more.....

Aspect ratio changes when importing to FCE 4.0.1

Similar Messages

Maybe you are looking for