Aspect ratio for a video object

How can you maintain a video objects aspect ratio? The
property maintainAspectRatio seems to work only with the
flvplayback component.

Regardless of the display resolution, if your projector is displaying pixels in a slightly oblong fashion then its outside of the Mac's ability to compensate. The most the mac can do aspect ratio-wise, is to set a different number of pixels on the x and y axes, which would create a different screen aspect ratio, but wouldnt touch the pixel aspect ration. Perhaps the oblong pixels are the projector's way of stretching a too-narrow screen resolution to fit the area the projector is trying to cover. You should be able to change the output screen resolution to the projector in the displays system preference. Try several and see which one works best with the projector.

Similar Messages

How to set custom aspect ratio for vertical video?

I need to have a vertical video (720x1080) rather than 1080x720. In the old FCP under project properties, one was able to change the ratio without a problem. On FCP X, the only formats avaible are all horizontal. Am I missing something? Help-thanks!

Thank you Tom. That was very helpful! Is there away to make it export on those dimmensions too? with the compund clip I got it to look good, but the export option is only 1080x720 with black on both sides.

What is best format and aspect ratio for iPOD video ?

When i use the default QT export to ipod setting it converts the video to 320x240. I dont plan on mainly watching the video on the ipod more from the ipod out to a 16:9 HD TV. What is the largest aspect ration I can encode the video to play on the ipod and play from the ipod to a HDTV? and what format should I use I dont care about file size I want best quality.
Thanks

Hi:
Probably this tutorial could be helpful: http://www.kenstone.net/fcphomepage/video_to_ipodstone.html
Hope it helps !
Alberto

Wrong aspect ratio for imported widescreen videos

When I import some videos (home made) they show up as the wrong aspect ratio. For example, the latest one is 1026x576 in the folder, which is correct, but shows up as 1456x576 which is too wide. How can I prevent this? Incidentally, I have checked the file in itunes folder using quicktime, and it is correctly sized at 1026 wide. Strangely, itunes thinks it's wider. Also, this is a problem I have found in previous versions of itunes. Phil

Hi, it's very strange. When I get time I will try different settings on Handbrake to see if there is any improvement. However I have even had this problem when outputting from fce. It seems to be a bug in iTunes. At least I'm not alone in experiencing the problem. Regards Phil

Aspect ratio for video assets

do all video assets need to maintain an aspect ratio of 3:2? for example, i have a QT movie (to be used as a menu header) that i animated in after effects that is 300x40. when i import this into DSP, the inspector says that it is 720x480 and the result is a distorted video. I have manipulated my AE file to maintain a 3:2 ratio (360x240) and that looks fine in DSP. However, the inspector still says that the video asset is 720x480. and, when i place it in a menu, i am prohibited from placing it exactly where i would like for it to be (due to the size of the drop zone). any thoughts or ideas?
thanks in advance
J
Dual 2GHz G5 Mac OS X (10.3.9)

yes, 4:3. sorry, i'm used to AE referring to a 720x480 as 3:2. it considers a 720x540 (sq pixels) as 4:3. old habit i guess.
when i change the drop zone's size by dragging the handles, it works fine unless i try to alter the width of the drop zone. for some reason, when i do that, it scales down the video asset.
i've also noticed that if i set up a livetype file in a nonstandard 4:3 size (like 300x40), DSP does the same thing to it as it did to the QT that was rendered in AE. it distorts it by stretching it vertically, causing it to look horrible in a drop zone that is the same size as the livetype file. i'm just trying to find easy and efficient ways to animate button text and menu headers without having to compose the enitre menu in AE. but i believe that you are right, i may be better off just doing it that way.
thanks for the advice,
J
Dual 2GHz G5
Dual 2GHz G5
Dual 2GHz G5

Aspect ratio for stills in a video - Pre 11

My camcorder is set to 16:9 aspect ratio. Pre11 seems to know that and automatically uses that format. My still camera is usually set to 4:3. I frequently add some stills to my videos at the end - add some music and use cross dissolve transitions. Those pictures keep their 4:3 aspect ratio (which I personally like for most stills).
I am new to Pan & Zoom. I notice that when using Pan & zoom the keyframes are 16:9 ratio. This sometime requires too much cropping (especially if the still was a close-up). Is there a way to make PRE11 use 4:3 ratio for stills using pan & zoom?

Select your still on your timeline, then click the Adjust button to open the Adjustments panel. Open the Motion properties, then click the Show Keyframe Controls button (the stop watch) in the upper right corner of the panel.
I show you step by step how to keyframe motion path pan & zooms in my books, if you're interested.
http://Muvipix.com/pe11.php
And, if you just want to learn the basics of the program, I've got a free 8 part Basic Training tutorial series for Premiere Elements 11.
http://forums.adobe.com/thread/537685?tstart=0

Can anyone tell me if Quicktime Pro retains aspect ratio once a video is rotated?

I'm reluctant to purchase Quicktime Pro until I know the answer to this question and Apple Support doesn't seem to have anyway to ask, so I thought I'd try this group.
I took some videos with my iPhone (the long way), and need to be able to rotate them and convert them to avi files. I understand that Quicktime Pro can do the rotation and conversion, but I saw one review that said the aspect ratio is not retained, i.e. the video comes out flattend (wider).
Can anyone tell me if this is still true with QT Pro, or if there are other solutions for resolving this outside of QT Pro?? I have tried a number of other converters, and found one that rotates, but aspect ratio not retained.
Thanks in advance for any help shared!!!

I took some videos with my iPhone (the long way), and need to be able to rotate them and convert them to avi files. I understand that Quicktime Pro can do the rotation and conversion, but I saw one review that said the aspect ratio is not retained, i.e. the video comes out flattend (wider).
This may or may not depend on your specific work flow. Many "settings' saved to the original file by QT 7 Pro are merely "playback instructions" which may or may not play correctly in other media players while these same settings do work properly when saved/converted to a new file container. In addition, not being a Windows user, I don't know if there are are any significant differences between the Mac and Windows versions of QT 7. In any case, I just took a short sample clip, stored it on my hard drive via Aperture 3, opened the file in QT 7 Pro, rotated the clip in QT 7 Pro, and used the "Save As..." command to store the modified file. This modified file now plays correctly in current versions of the QT 7, MPEG Streamclip, and VLC media players. Have uploaded a copy of this file so you can download it, test playback in various players you normally use, and/or test convert it to your specific AVI audio and video compression formats.
SAMPLE ROTATED FILE
Can anyone tell me if this is still true with QT Pro, or if there are other solutions for resolving this outside of QT Pro?? I have tried a number of other converters, and found one that rotates, but aspect ratio not retained.
As indicated above, the file plays correctly for me in various media players and all media "Inspector" windows, including other third party media information utilities, confirm the correct dimensions and aspect ratio as displayed. As to AVI conversion, I test converted the uploaded file to AVI (DivX5/MP3) at original dimensions using VisualHub. (Also tried the VideoMonkey AVI encode but it limited the source 720p file to a 720x480 output and I did not know if you were agreeable to such a restriction.) Suggest you run similar tests with your preferred Windows converters to confirm/refute results on your system.

How do I change the aspect ratio of source video in the event library?

I’ve imported video to iMovie 08 from a Canon Mini DV MD235 video camera. The video is recorded in widescreen format and plays back in widescreen when viewed from the iMovie event library (prior to doing any video editing). However, when I delete rejected frames from any particular video clip in the event library the video clip is automatically pillarboxed (i.e. switched from widescreen to 4:3 format). This squashes the video horizontally, stretches it vertically and leaves vertical black bars to the left and right of the video during playback. This automatic change in aspect ratio is occurring to the source video in the event library.
I’d be grateful for any help / advice on how I can convert the edited clips back to widescreen aspect ratio, so they display in the *event library* as they did when first imported into iMovie.

I don’t really want to clog up my hard drive with unwanted video and it’s easier to edit it from within iMovie.
Have you considered manually importing only portions of the clips you actually plan to use? Or, if you must import the entire clip, have you considered trimming externally in an application like MPEG Streamclip which will allow you to set frame level in/out points and then perform a "Save As..." operation that stores the select range of frames to an MOV file container retaining the proper flag?
Is there anything I can do from within iMovie to activate the 16:9 setting for these as yet unedited clips, so the same pillarboxing doesn’t happen?
Not sure what you mean by "unedited" here. If the files have been destructively split, the flag is gone and there is nothing you can do about it but re-compress. If you mean they are imported but as of yet whole and still contain their flags, then you have two options. The first is to edit non-destrctively within iMovie '08 and the second would be to do the trimming externally.
This second option is really fairly simple. Just close iMovie '08. Open MPEG Streamclip and load a clip you want to trim. Set your in and pout points, select the "Save As..." option, and store the files in the original Events folder with a new name. I would also recommend you perform these trims in their original time sequence so the "creation" date time groups (Finder attributes) are in time order also. When done with the loaded clip either delete it from the "Event" folder or move it to an archival location. When done with the last clip, close MPEG Streamclip, delete the Cache and Thumbnail folders from the Event folder, open iMovie '08 again, and go get a cup of coffee or tea while the files are re-thumbnailing. DO NOT DO THIS TO ANY EVENT WHICH CONTAINS FILES ALREADY USED IN ANY PROJECT. (I.e., this must be done before you start the actual project editing process.)
It seems odd to me that iMovie is doing this.
I suspect that as the application was originally written as an NLE, non-destructive, "by reference" application, the writers/updaters "overlooked" this facet when adding a "destructive" routine and did not provide for checks of this flag nor provide for copying it re-written segments.

Sequence Aspect Ratio for HD

I am transferring HD video from AVCHD into FCP 6.0.4, and I need to know what the correct setting is for the aspect ratio (in the sequence preset editor). The footage is captured 1920x1080 at 30p. I plug that all in, but the only choice for plain HD at 16:9 is at 1440x1080. If I want to select 16:9 it's called HDTV 1080i???
Can someone help me understand why there is not a setting for HD 1920x1080 in that window? Is it normal for me to have to select 1440x1080? Even though all the other settings are at 1920x1080???
Also, do i have to check anamorphic 16:9?
Thanks in advance!

I'm sorry, I'm a bit confused.
this time I set up my session/sequence to be for 1440x1080, transferred the media into the session. When I drag my first clip into the Canvas - the FCP pops up a window saying that the clip and the sequence don't match. I tell it to correct it - and it puts it back to the 1920x1080 - HDTV 1080i setting.
What am I doing wrong? Should I be converting it differently?
And which is correct - anamorphic or no???
Thanks

Need help changing size and aspect ratio for 500+ images

Thank you for reading this! I have about 500 images of people in different poses. They're all extracted on a transparency as PNGs. They vary in aspect ratio, dimensions and position of the person within the frame - for some the feet are very close to the bottom of the frame and for some, they're higher up. I need to equalize all 3 of these qualities, so that if superimposed, they look like a video unfolding with the same zoom. My ideal size would be 800x800 at 300ppi.
Is there a way to batch even a part of the process and keep the png format? I had the images in PSD initially but they were too massive so creating catalogs with them was prohibitive.
If not possible to do a batch, what would be the best (easiest) and fastest way to do it? I'm thinking that maybe creating some template where an oval shape the size of the head can help create consistency of the size of the person and a line that helps set up the distance from the bottom?
I so appreciate any help you have to offer. Part of my problem is that I don't know what these processes are called so I don't even know what to search for. If you can even name the actions that I need, it would be of great help. I already paid a designer to do the extraction and they were supposed to do this formatting as well and they didn't so my budget is shot. I'm hoping that if I understand what the steps are, I can do them myself.
Thank you!

If you download my crafting actions package you can record an action that uses one of my plug-in scripts to do that process. You could then batch that action and process your 500 png image files.
Crafting Actions Package UPDATED Aug 10, 2014 Added Conditional Action steps to Action Palette Tips.
Contains
Action Actions Palette Tips.txt
Action Creation Guidelines.txt
Action Dealing with Image Size.txt
Action Enhanced via Scripted Photoshop Functions.txt
CraftedActions.atn Sample Action set includes an example Watermarking action
Sample Actions.txt Photoshop CraftedActions set saved as a text file.
More then a dozen Scripts for use in actions
Example
Download
Step 1 Select layers transparency
Step 2 Copy
Step 3 Paste
Step 4 Select all
Step 5 Align Layer s to selection vertical center
Step 6 Align Layer s to selection horizontal center
Step 7 Select bottom Layer
Step 8 delete current layer
Ste9 9 Fille>Automate>AspectRatopSelection... In the dialog set 1 1 ratio center rectangle replace selection feather 0
Step 10 Image Crop
Step 11 File Automate>Fit Image. In dialog enter width and height 800
Step 12 Image size in the dialog uncheck Resample and enter 300 in the resolution field.
I'm sure the should work you mane not need the copy paste and it depends on how Photoshop treats the PNG layer the canvas size or just the pixels.
This may also work
Step 1 Select all
Step 2 Align Layer s to selection vertical center
Step 3 Align Layer s to selection horizontal center
Ste9 4 Fille>Automate>AspectRatopSelection... In the dialog set 1 1 ratio center rectangle replace selection feather 0
Step 5 Image Crop
Step 6 File Automate>Fit Image. In dialog enter width and height 800
Step 7 Image size in the dialog uncheck Resample and enter 300 in the resolution field.

How do I trim a .WAV file in iMovie 09? / Proper aspect ratio for iPhone

Hi,
I have a .WAV file that I want to use in my project but I need to trim off the first 1/4. How do I do the using iMovie 09?
Also I shot all of this with an iPhone. Which aspect ratio should I choose... It will be played on a WideScreen TV.
Thanks.

I would use 16:9 for aspect ratio.
[See this video tutorial for how sound works|http://www.apple.com/findouthow/movies/imovie08.html#audioclips]. You can do it by dragging the handles on the end of the audio clip.
Then see [Ken Stone's Tutorial for another way with the Clip Trimmer.|http://www.kenstone.net/fcphomepage/imovie_09stone.html#music%20sound%20effects]

IPhoto slideshow has wrong aspect ratio for iMovie and/or FCP

When I output a slideshow at 720x480 from iPhoto then import it into iMovie or FCP, the images are stretched vertically. I can adjust the ratio in FCP (-10 seems to be a good number), but there is no fix for iMovie. I like the iPhoto slideshow capability and prefer using it for my slideshows. What do I do to get an unstretched QT for import into iMovie or FCP?
AGP Powermac G4 Mac OS X (10.4.4)

You're encountering a difference between rectangular DV pixels and square "computer screen image" pixels.
When working with DV timelines, the best way to get good frame grabs would be to export your 720 x 480 still, then re-size it to 640 x 480 using Photoshop. (BTW, you can use a Photoshop batch function to re-size multiple images automatically.)
If you're starting with a timeline that only contains square-pixel (not DV video) images, try this:
Sequence > Settings > General Tab
Pixel Aspect Ratio: Square
Now:
Open a clip in the Viewer window, and look under
Motion Tab > Distort Pane
Aspect Ratio should = 0
[Under certain conditions, FCP makes educated guesses as to the pixel aspect ratios of imported images, and uses this setting to automatically apply corrective distortion when it believes it is necessary. Usually it is correct, but under unusual circumstances like your project, you may have to correct FCP's correction.]
The fastest way to confirm this would be to
Select All
Ctrl-Click
Remove Attributes
Check "Distortion"
[If it is greyed out it means that none of your clips have any distortion applied so you are good to go.]
Now you can export un-distorted frames from a square-pixel timeline, and shouldn't experience any pixel-aspect ratio confusion.
Good luck,
Zap

Can you 'force" change aspect ratio for DVD player 4.0?

Hi,
I have burnt a dvd-r from my pioneer hdd/dvd recorder (630H). The program is in 16:9 ratio but plays at 4:3 on my powerbook dvd player 4. (All other dvd-r burnt via other burners appear OK however - so I guess this is something peculiar to the Pioneer) Why is this?. Question is: is there any way to "force" the apple dvd player to change aspect ratios? Thanks for any assistance.

I've got about 20 video tracks and one audio track all laid out and I've decided I'd like to insert something before the audio track so if I move the audio track everything else will be off. Is there a way to shift all the video tracks and the audio track over to the right to make room for the inserted video?

Best Aspect Ratio for Most DVD Players?

Hello savvy users,
I'm getting ready to deliver the Master DVD to the duplication house.
What, in your experienced opinion, is the best aspect ratio to use for folks to play on their players.
It's a HIGH SCHOOL recruitment video that will be handed out to parents, etc.
(I may have missed it -- I've searched the forum but couldn't find an answer...)
Thanks

Oh Please...stop the sobbing!! Did I ask questions on this forum without knowing the basics?...absolutely not!! Im here to help but that would be impossible to do without you knowing a little about video before you can do that. There's way too much to cover over a internet forum. Beside I gave you some good info already. Here's some more. You'll recieve more help if you dont take things so personally.
http://www.kenstone.net/fcphomepage/16-9_dvdsp_setupstone.html
http://www.kenstone.net/fcphomepage/fcp_homepageindex.html#dvd
http://www.youtube.com/results?search_query=dvdstudio+pro+tutorials&aq=f

Custom aspect ratio for Iscorama footage?

I'm planning on shooting some video with an Iscorama anamorphic lens on a Canon EOS 6D. The Iscorama gives the image a 1.5X horizontal squeeze that must be decompressed for the footage to be viewed normally. What I need to do is adjust the aspect ratio in iMovie '11 so that the horizontal dimension is expanded 1.5 times, while the vertical dimension retains its original value. This will result in the original 1.5:1 aspect ratio being rendered as 2.25:1. Is this possible to do in iMovie '11?

Leigh Hanlon wrote:
… Other than buying FCP, is there a less-expensive way to accomplish this?
best to my knowledge, only the 'pro' versions of NLEs (FCP, Premiere, Avid) offer this feature.
… but you spend so much money on a superb cam - give it an approbiate edit app

Aspect ratio for a video object

Similar Messages

Maybe you are looking for