Aspect ratio for the 3D can mesh in CS6

Hello,
I am creating a 3D can that I want to place a label design on. When I open up the mesh (diffuse texture) and place my label design on it, it does not fit proplely, it is flipping it and scaling it. I have use the UV propeties to scale it but it is doing only a so-so job. Does anyone know how to make this work easily?
Thanks in advance!

I will attach (ZIP file) the CS5 Soda can here, I hope this helps until we correct that UV issue in the CS6 can.
If you want it to appear in the Mesh Preset menu you need to copy the CS5_soda.dae here:
C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Presets\Meshes
On the Mac Applications | Adobe | Adobe Photoshop CS6 (64 Bit) | Presets | Meshes
When you add it will be here in the 3D menu > New Mesh from layer > Mesh Preset >

Similar Messages

How can i export a series of images in different aspect ratios to the same height

How can i export a series of images in different aspect ratios to the same height?
I wish to make a slider callery for my website. all the images need to be 750 Pixels high, the width does not matter. I have a mixture of square pandscap and protraite images can i do thing as one export or do i have to do it twice? Once for long edge and once for shot edge?
Thanks

Yes, you can but there is a trick to it.
In the Export Dialog under <Image Sizing> select Widdth & Height.
Then enter 750 pixels for Height.
Put your cursor into the Width field behind all the numbers that appear there and with the backspace key delete the numbers. If you enter "0" it will not accept that. But it accepts when you just delete the field for Width with the backspace key. The Width field will now be just blank.
When you then export all image will have a height of 750 pixels and the width will fall variously according to thne height / width ratio.
Or alternatively you can enter 7.5" for height at a resolution of 100 ppi.

CS6 Camera Raw - I can now only crop using aspect ratio in the custom crop setting rather than being able to set the dims in cm and inches? anyone know how to revert? ever since installing new mac operating system things have been strange!

CS6 Camera Raw - I can now only crop using aspect ratio in the custom crop setting rather than being able to set the dims in cm and inches? anyone know how to revert? ever since installing new mac operating system things have been strange!

Hi Kglad.
I have looked at all of my settings both in Bridge and CS6 Photoshop regarding Camera Raw. I am at a loss how to set the crop tool in cm or inches as I once did - now the only option is to crop using ratios of 1:1 etc etc - This is infuriating as lots of my square crops I could set at 10" x 10'' specifically to print one to one to fit frame and mount size -
Now if cropping using bloody aspect ratio of 1:1 (square) the actual dims of the crop are roughly 4.25 inches x 4.25 inches. this means I then have to open the whole image in photoshop in order to crop at the dims I have set! It was so much quicker in terms of batch cropping in camera raw being able to set dims in centimetres and inches but they have gone and mucked around with it, with the new bloody update! Unless you are an absolute genius and know how I can go back to having an option of CM, Inches and aspect ratio within the custom crop settings? (Please say you do)
here is the new tutorial for CC - my guess is they have scrapped the control we had over the custom crop settings
Cropping Images In Adobe Camera Raw 8

Using Win 10 there is a need for an app to determine the full device display area and aspect ratio programitically; the dimensions are needed to create full-screen bitmap.

While Windows.Current.Bounds returns the application windows size, in order to create a full-screen bitmap my app would need to retrieve the full display area of the device. I cannot even get the aspect ratio.
Pre-Win10, using Windows.Current.Bounds I can create a bitmap of whatever size application window the user is seeing. When the user is showing my app at full screen, I can therefore get the full display area and aspect ratio of the device and create a full-screen
bitmap.
With Win10, the user would need to know to hide the taskbar and also display at full-screen before an app can retrieve the display area and aspect ratio using Windows.Current.Bounds.
Before Win10 it's obvious to the user that full-screen is or is not being used. When I create the bitmap, I create it to fit the application window. When the app is displayed full screen, the bitmap will be full screen. Also, the app starts full-screen so
I can detect the display area at startup if I need to.
With Win10, to the user the app "looks like" it is full screen with the taskbar displayed even though it's not really full screen.
I believe that in Win10 determining the full display area will be useful and not just retrieving the application window size.
musical9

Rob, Is this forum best way to get my suggestion to the development team?
Before Win10 it's obvious to the user that full-screen is or is not being used. When I create the bitmap, I create it to fit the application window. When the app is displayed full screen, the bitmap will be full screen. Also, the app starts full-screen
so I can detect the display area at startup if I need to.
With Win10, to the user the app "looks like" it is full screen with the taskbar displayed even though it's not really full screen.
Yes, Windows.Current.Bounds does work the same, but I believe that in Win10 determining the full display area will be useful and not just the application window.
musical9

What aspect ratio is the 15'' macbook pro retina 2013 model?

Hello. Can someone please tell me what the aspect ratio of the 2013 Macbook Pro retina 15inch is? Is it 16:10 or 16:9

Glad to have helped in some way. I'm a college student that is on this website because I am a huge apple fan, have good knowledge of apple products, and enjoy helping others.
I'm sorry you had an encounter with a rude person. I promise you most people on here are not like that. These are support forums for getting help with your apple products. This is the right place for you to ask questions and get help concercing them. You will find that most on people are helpful and kind.
Your question was in no way stupid and deserved a nice response. I have a grandpa who is 90 years old and he tends to ask questions that can be considered stupid such as "how do i close this window" or "how do i find the internet browser" but none of us ever ridicule him on it we are all just happy he can use the computer at his age.

Sequence Aspect Ratio for HD

I am transferring HD video from AVCHD into FCP 6.0.4, and I need to know what the correct setting is for the aspect ratio (in the sequence preset editor). The footage is captured 1920x1080 at 30p. I plug that all in, but the only choice for plain HD at 16:9 is at 1440x1080. If I want to select 16:9 it's called HDTV 1080i???
Can someone help me understand why there is not a setting for HD 1920x1080 in that window? Is it normal for me to have to select 1440x1080? Even though all the other settings are at 1920x1080???
Also, do i have to check anamorphic 16:9?
Thanks in advance!

I'm sorry, I'm a bit confused.
this time I set up my session/sequence to be for 1440x1080, transferred the media into the session. When I drag my first clip into the Canvas - the FCP pops up a window saying that the clip and the sequence don't match. I tell it to correct it - and it puts it back to the 1920x1080 - HDTV 1080i setting.
What am I doing wrong? Should I be converting it differently?
And which is correct - anamorphic or no???
Thanks

How to get the aspect ratio follow the mouse?

Hi! I'm just wondering, is there a way to have the aspect
ratio follow the mouse?
Cause I'm trying to implement Adobe Capture-videos to a
phpbb-based forum and therefore, the videos can't be any bigger
than standard youtube-videos. So I need to have the aspect ratio be
fixed and about 448x337 pixels. And when i want the mouse centered
in the video and have everything around follow the mouse.
Is there a way to do this? Or do I just have to create a link
in the forum to a new browser-window?

Hi Kenny Bones and welcome to our community
Unfortunately there is no way to automatically have this
occur. With Captivate, you simply define a recording region of the
screen and grab whatever happens inside that region. I suppose one
way you *might* accomplish it would be by manually recording. In
this case, you press the Print Screen key each time you desire a
screen grab. But for what you are talking about, it would require
toggling on and off the full motion recording. (FMR) Turn on FMR,
move the window, turn off FMR, etc.
This sounds like something you might wish to suggest to the
development team. You may do this by
clicking
here and completing the form.
Cheers... Rick

Aspect ratio for a video object

How can you maintain a video objects aspect ratio? The
property maintainAspectRatio seems to work only with the
flvplayback component.

Regardless of the display resolution, if your projector is displaying pixels in a slightly oblong fashion then its outside of the Mac's ability to compensate. The most the mac can do aspect ratio-wise, is to set a different number of pixels on the x and y axes, which would create a different screen aspect ratio, but wouldnt touch the pixel aspect ration. Perhaps the oblong pixels are the projector's way of stretching a too-narrow screen resolution to fit the area the projector is trying to cover. You should be able to change the output screen resolution to the projector in the displays system preference. Try several and see which one works best with the projector.

I'm getting error messages when I download updates for lightroom and flash for the mac. can't figure out how to trouble shoot.

I'm getting error messages when I download updates for lightroom and flash for the mac. can't figure out how to trouble shoot.

It sounds as if your browser and some of your apps are not color-managed. This is pretty typical. Even IE9 is only partially color-managed.
You can expect color-managed and non-color-managed applications to show you different things with the same images. How different will depend upon how different your monitor color profile is from the image's color profile.
For web publication and most general use, experts usually advise saving images with the sRGB profile. If such images, saved through the Save for Web & Devices function, look different to you than you expect, it may be that your input images have previously been saved in another color space.
You should really try to get your head around color-management by reading more on it. It can seem baffling and it's difficult to understand without some background. A quick web search turns up many overviews. Beware, though, even people writing articles sometimes don't fully understand it.
-Noel

How due date for the invoice can be a backward date

Hi
How due date for the invoice can be a backward date as billing date in future.
Pinky

Hi,
Please elaborate on your problem.
regards,
Siddharth.

I forgot my password for the laptop can I reset the password ?

I have my apple id but I've forgotten the password for the computer can I reset it some how?

You router has two passwords.
1) The router login password must be given to login to the router and see the router settings. The default password is "admin". If you changed the password and cannot remember it, the only option is to reset the router to factory defaults (using the reset button), then setup the router again from scratch.
2) The router also has an optional wireless encryption password. To find this password, login to your router, and click on the "Wireless" tab, "Wireless Security" sub tab. Here you will see your encryption method. Nearby you will see your "key" (sometimes called password or passphrase). If you want to reset your key to something different, you can change it here, then click the "Save Settings" button, and wait (3 to 60 seconds) for the screen to refresh. If you change your key in the router, you will need to change it on all your computers.
For WEP, enter WEP "key 1" (found in the router) into your computer, not the password or passphrase.
For WPA or WPA2, enter the key (sometimes called password or passphrase) into your computer.
Also note that if you are using WPA2 encryption, and if your computer is using Windows XP, then the computer will need to be upgraded to SP3 to do WPA2. Vista already supports WPA2.
Message Edited by toomanydonuts on 01-05-2009 04:50 AM

Unable to open delivery reports in Exchange 2013 SP1. Gives warning "The status for the recipient can't be determined because of a temporary error. Please try again later."

This seems to be occurring with all users (have tested a few, all display the same exact error message).
When I click on "Message Delivery Report" in Outlook 2010 or 2013, it points me to the ECP and displays this message "Warning The status for the recipient can't be determined because of a temporary error. Please try again later." I'm
not sure which log files to look at. The last time I remember it worked was before I applied SP1, I think CU3.
Our environment is two servers running Exchange Server 2013 Std. SP1 (847.32) in a DAG.
Thanks.

Hi,
From the error description, I would like to clarify the following thing:
Delivery Reports is a message tracking tool that you can use to search for delivery status on email messages sent to or from users in your organization's address book, with a certain subject. In Exchange 2013, you can track messages for up to 14 days after
they were sent or received. Please make sure the message you are tracking isn't older than 14 days.
Here is an article for your reference:
Track messages with delivery reports
http://technet.microsoft.com/en-us/library/jj150554(v=exchg.150).aspx
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support

I get the icon for "The song can't be located

I get the icon for "The song can’t be located; it may have been moved or delete" but it is there and if I play it it does play. However, it will not sync. I have thousands of songs in iTunes and this appears on many of them. Is there a quicker way of clearing the icon other than playing each track?

That icon does indeed mean that the file cannot be located (I just needed to confirm this, to avoid future confusion).
When you start iTunes, any external storage locations need to be ready to read and have the same drive letter associated with the drive as it did when you added the songs to your iTunes Library. If these conditions are not met, then iTunes will be unable to find the file.
In addition, if the file has been renamed, moved (but still on the same drive) or even deleted, by you, or any other programme, then once again, your iTunes will not be able to find the file, hence the exclamation mark.
I'm no experrt on NAS storage, but essentially, the file path to the song's file must remain constant. iTunes looks for the files as soon as it starts up.
If all your Librayr is external to the computer, you could try re-linking the whole Library to iTunes. Alternatively, I think it's going to be one at a time.

Please , i need youre help ! im from Mexico and i dont speak inglish well but ill try explain me... i buy a cs5 students edicion but i lost my paswoord for the instalacion can you helpe me ? how can i recuperade my paswoord

please , i need youre help ! im from Mexico and i dont speak inglish well but ill try explain me... i buy a cs5 students edicion but i lost my paswoord for the instalacion can you helpe me ? how can i recuperade my paswoord
Creative Suites

Find your serial number quickly
Mylenium

Can you 'force" change aspect ratio for DVD player 4.0?

Hi,
I have burnt a dvd-r from my pioneer hdd/dvd recorder (630H). The program is in 16:9 ratio but plays at 4:3 on my powerbook dvd player 4. (All other dvd-r burnt via other burners appear OK however - so I guess this is something peculiar to the Pioneer) Why is this?. Question is: is there any way to "force" the apple dvd player to change aspect ratios? Thanks for any assistance.

I've got about 20 video tracks and one audio track all laid out and I've decided I'd like to insert something before the audio track so if I move the audio track everything else will be off. Is there a way to shift all the video tracks and the audio track over to the right to make room for the inserted video?

Aspect ratio for the 3D can mesh in CS6

Similar Messages

Maybe you are looking for