Aspect Ratio Import Export settings?

Hi - I'm not terribly experienced in post, mostly a production kinda dude... so bare with me please...
I have a QT avi film file - 3ivx D4 4.0PR2, 640 x 272, Millions
MPEG Layer 3, Stereo, 44.100 kHz - FPS - 25
I did not create this so I can't answer any questions about software or settings used to create it beyond what you see above.
I'm trying to see if I can turn it into a DVD which will play on a normal DVD player. ( Mostly as an exercise to teach myself how...)
I drag and drop the file into my Assets window and am told in another small window that it's 720x480 NOT 640x272... If I drag it onto the time line I get a squished 4:3 image (vertically stretched)
If I double click on the file in the asset box it pops up in its correct format...
I've futzed around with the only two settings I've found that seem to have any bearing (Preferences, Simulator Aspect Ratio, 4:3 Letterbox - AND - Encoding , Aspect Ratio 16:9) - I've tried every combo without success.
My goal? To produce a DVD which will play letterboxed on a 4:3 TV and 16:9 or 1:85 on a HD TV... Worse case scenario for now I'd settle for the letterboxed version.
Can anyone help this moron here????
Also while you're at it... why does the size meter at the top of DVD Studio Pro show a much bigger size than the file I'm using? And why is there an addition audio track that is imported with a huge size????
HELP??????
JHF

Your best bet here is to get that file into a DVD legal size before you get it into DVDSP. I would also convert the audio as well - you need to use an uncompressed format at 48Khz, or convert it to Dolby Digital (AC3).
If you import these assets in to DVDSP it will do the best it can to convert them when the disc is built, but I wouldn't like to count on the resulting quality!
You could create a FCP project and import this asset in to that, setting it into the centre of the frame leaving black all around if you want to keep the original size/proportions. Export the result and encode that to MPEG2 using Compressor (or whatever your preferred MPEG encoder happens to be). Then import the resulting M2V file with the audio (which is now at 48Khz) into DVDSP. You should then be good to go.
The file size meter in DVDSP is showing you what the unencoded assets are, and the additional audio file is because MP3 is not a DVD format - it is creating this for you to use on your timeline... it's going to be uncompressed, and as you say, huge.

Similar Messages

Black bars alongside video+squished aspect ratio on export

I'm trying to get my import/export settings right--I keep getting black bars and a squished or stretched image when my videos export. Since Elements doesn't read MOD I've been using miro to convert, which doesn't like to export to mp4 all that well to begin with (which furthers my diagnosis problems.) I don't know anything about video image->pixel size (nor can I find anything online that makes sense to me) and canon's website doesn't tell me what my camera is shooting in in those terms, but I've been using the widescreen format--what is that size?? I'm not sure if this problem is because of defaulting project settings on import (Elements not picking up on the proper format and defaulting to something else), an exporting problem (I've tried all the different settings under publish+share>computer>mpeg4 and quicktime>NTSC DVD standard and widescreen, as well as every other export option I can think of), or a conversion problem (why doesn't Elements accept MOD to begin with? Final Cut 7 does no problem!) Everything looks good in the editing process, plays fine etc.
Is this a simple fix? The videos play fine in quicktime, but VLC catches the bars, which makes me think it's a simple solution to a complex diagnosis. Please help, thanks.
CAMERA:
canon FS200
MOD file format (raw file image/pixel size is not shown, can't find it)
mac OS.10.8.3
Elements 11.0
Miro converter 3.0

stockdizzle66
Thanks for the update.
Let us look into the following next, one problem down (the aspect ratio), next the quality of playback of your Timeline as seen in the Edit Mode Monitor.
1. Given that you are working with .mod widescreen 16:9.
a. Open a new Premiere Elements 11 Mac project. Go to File Menu/New/Project and set the project preset yourself in the new project dialog. You want NTSC DV Widescreen. Make sure that you have a check mark next to "Force Selected Project Setting on this Project" before you exit the new project dialog.
b. Once back in the Premiere Elements workspace, go to Add Media/Files and Folders and import your mod.widescreen into Project Assets.
c. Right click the .mod widescreen file in Project Assets, select Interpret Footage, and, in the Interpret Footage dialog, dot the Conform to: and set that to DV/DV NTSC Widescreen 16:9 (1.2121).
d. Drag your .mod widescreen to the Timeline from Project Assets. Do you see no colored line over the content, an orange line, or a green line? If an orange line, render the Timeline with the Render button or pressing the Enter Key of the computer main keyboard. Is the .mod widescreen now display the same, worse, or better than before we started all this?
Also, right click the monitor, select Playback Quality, and see if there is any difference in what you are seeing if you use Highest instead of Automatic as the set. Also check to see if Magnification there is "Fit" rather than other.
Is your video card driver up to date according to the web site of the manufacturer of the video card?
Please review the above and let us know the outcome.
Thanks.
ATR
Although conversion .mod widescreen to another format is always a consideration, it has not been found to be necessary in essentially most cases. Classically, if an import problem with this type of file, the renaming of the .mod file extension to .mpg prior to import took care that while Interpret Footage took care of the aspect ratio issue.
I just saw your note about MPEG Streamclip. That works great for Windows for conversion to DV AVI. Never tried it for a .mov export for Mac. But remember there is an option for 4:3 or 16:9 in that dialog (or there should be...I will take a look if you do not find it). So no distortion expected since MPEG Streamclip should be supplying that problematic 16:9 flag.

Distorted Aspect Ratio of Exported Frames

My project's aspect ratio is 16:9 (720 horizontal, 576 vertical).
I inserted a clip into the timeline.
I exported a certain frame to a file as an image.
The image file's size: 720 x 576.
I proceeded to import the image file into the project, and inserted it into the timeline.
The image's aspect ratio is not the same as the original footage.
Specifically, the horizontal side is narrower than originally (see attached screenshots).
What causes this discrepancy?
More importantly, what can i do to get exported frames to match the aspect ratio of the project?

OK, I've got the BMP. When I looked at your images, I thought that we were seeing your still image on the Timeline. We are not. That shape/size is what was produced.
Now, remember that I am on PrE 4, so things will be different in PrE 8. Still, I should be able to get you close. In PrE 4, one uses File>Export>Frame to do a Frame capture under the CTI (Current Time Indicator), and visible in the Program Monitor. When you choose this, you will get the standard Windows dialog screen, where you name and locate your still image. There is also a settings button, that will open up a second dialog box, for you to adjust many attributes of your Frame capture. There, you will have three choices in the left-hand Pane: General, Video and Keyframe and Rendering. First, go to General, and you'll get File Type w/ a dropdown. There, you can choose the format type and should have JPEG, TIFF, BMP, TARGA and GIF (maybe more in PrE 8, like PNG?). I'd stick with TIFF or BMP. About the only other choice is whether you want to add this captured still in your Project, or not. That is your choice.
Go to the Video listing in that left-hand Pane. There you can choose the Frame Size, the PAR and the Color Depth. Make sure that these match your Project's and your source footage's exact specs. Unless you need the Alpha Channel, and are using either TIFF or TARGA, leave Color Depth to Millions of colors. Otherwise, choose Millions +, where the + is that Alpha Channel.
I'd guess that it's in those settings, as to what is happening with your Frame capture. Let me know if you get this sorted, and sorry for my mis-step, but I was not clear on what I was seeing, and where I was seeing it.
Good luck,
Hunt

Changing aspect ratio when exporting

I want to chamg the aspect ratio to 16:9. How do you do this in PRL 7?

What do you want to change?
- The original material as recorded by your camera?
- Or a 4:3 project you are already working on in PE?
When you start a new PE project, you should specify the format: 4:3 or 16:9 (widescreen).
You cannot change these project settings inbetween. As a workaround: save your video on the timeline as an .avi; start a new project with the required different settings and import this .avi in the new project.
You can input 4:3 footage in 16:9 projects and vice versa, but PE will then crop the image or add black lines to it.
Also you can share (export) a 4:3 project as a 16:9 movie and vice versa, but the same will happen.
Easiest to start with:
Open a new project and select 16:9 settings.
Import 16:9 clips from your camera or whatever source.
If you import 4:3 clips/pictures: enlarge en position these on the timeline so that the enlarged picture will fill the entire 16:9 screen.
Hope this helps a bit.
Felix

Unwanted moderate distortion of aspect ratio when exporting video

This seems to be a new problem for me, and I don't THINK I've changed any of my parameters. But the result is now wrong... Help!
I use my VCR to record from US broadcasts (good old fashioned plain old TV, NTSC, I presume). Then I transfer snippets onto my DV camcorder (good ol' plain DV, nothing with 16:9 or anything like that). Then I import my DV footage into iMovie HD 6.0.2. It imports fine and looks like a normal aspect ratio.
But when I export using the File > Export... setting, I get a Quicktime video which appears vertically squished. The faces are too wide, bodies are too fat.
Looking at the various aspect ratios, I see that the preview window in iMovie HD is about 720 by 525 -- there are no black bars or letterboxing, and faces and bodies look normal. But the output video is 720 by 480, which is (according to a quick Google search) a normal NTSC output. No cropping has taken place, and no letterboxing, either. So that's why it's squished. But...
So why is iMovie showing me something from right off my TV screen which is the wrong aspect ratio but seems to have the correct proportions? That would seem to imply that my good ol' TV and VCR are not actually operating in NTSC proportions... which would be extremely weird because the footage I happen to have recorded is from an old game show from the 1960s. Do I have some setting wrong somewhere?? Is there something fundamental I don't understand? Help! Like I said, this is a new problem with me and I don't recall having changed any import settings.

Thanks for your help! I had no idea that so many video processes use rectangular pixels. But I'm still confused. What I see on screen in iMovie (and most QuickTime stuff) looks fine, but what I got out of this last set of conversions looks wrong.
Obviously you used the Full Quality DV option which uses rectangular pixels, right?
Uh... I have no idea. I've spent a couple of minutes looking through the menus in iMovie and I don't see anything labeled "Full Quality DV". I'm not specifically trying to export in DV format; I'm trying to compress my NTSC format so that it plays back in nearly full size on my iBook laptop, which cannot keep up with Sorensen video or the H.264 (or two-sixty-whatever) codecs. I found that Cinepak CAN be played back at this size on my iBook. But Cinepak is a compression standard, not a video frame size standard, right?
What you are seeing is normal... 720x480 NTSC rectangular pixel DV should be scaled to 656x480 square pixels.
No, it's not normal. It doesn't look normal to the eye. It's not what normally happened to me in the past. It drives me nuts. By those three definitions, it's not normal.
I am not trying to export in a format that fits some video standard or TV set. I'm trying to export a QuickTime movie which will display properly when played back by QuickTime. So I'm extremely frustrated when iMovie (or something) takes a video clip from an NTSC source and for some odd reason squishes it.
When you say that "720x480 NTSC rectangular pixel DV should be scaled to 656x480 square pixels", I assume you mean that it should be scaled to that number of square pixels in order to display on a computer monitor with square pixels (i.e., basically all computer monitors) in a way which makes faces and bodies appear of normal proportions, right? Are you implying that the problem is that rectangular pixels are NOT being converted/resampled to square pixels, but that the conversion is being done on a (no-resampling) pixel-by-pixel basis? I'm just not sure I understnand the point you are making here.
Since I had different results in the past, there must be SOMETHING different about my current setup. After reading the link you suggested, I see that there are a HUGE number of possible complications out there. The main idea, however, is that I want to produce a QuickTime movie which looks the same as the preview shown in iMovie: Same shape of faces, same shape of bodies, just as it was when I originally viewed the footage on my television.
Thanks!

Problems with aspect ratios on export

Details:
CS4 PPro with all current updates
Win 7 64bit machine
Editing using the DV NTSC widescreen 48kHz sequence settings. Pixel aspect ratio 16:9 (1.21)
All of my graphics and video looks fine in the preview window as you can see in this screen capture. That logo is round.
Here's where the problem arises, when I export it to Adobe Media encoder it also appears to look ok.
But once the clip is exported and I playback the .mov file the video is squeezed and the logo is now oblong.
Not sure what to do as I've edited this entire video and do not have time to start over from scratch.
Here's the screen capture of the file in Quicktime. It does the same thing if I export it as an avi and play it in WMP.
Any help would be appreciated.

Here is the workflow to sort this out. (Note : QTPro)
Open your mov in QT Pro
Show Movie Properties (Ctrl-J)
Click on Video Track
Click on Visual Settings Tab
Un check the Preserve Aspect Ratio box
(Here is where you now need to do some math to change the 4x3 to 16:9 ratio) 16 divided by 9 = 1.7777 (1.78 is close enough)
Divide the Vertical Pixel Dimension by 1.78 and enter the result in the Vert Dimension box
Ensure the Preserve Aspect Ratio box is UNCHECKED
Hit Tab key and notice the image in the QT window change.
In the QT Window Menu - File>Save
Heres an example:
QT movie Original is 320x240
Divide 240 x1.78 ( ie. 240/1.78=134)
Note- It is important to SAVE. This process is only changing the Header flag info in the QT file.
Bingo!

16:9 ASPECT RATIO IMPORT PROBLEM

Hi
I have a camera using SDHS cards. I set it for 16:9 aspect ratio recording. I know the output is 16:9 because it is when I use a SDHC card reader and view it on the PC with the viewer or play it elswhere it is 16:9
I set the new project to 16:9. in PRE-8 and got the media from the SD card. It imported it as 4:3 however and distorted it. The PRE-8 screen is showing the 16:9 preview box so I think it is set properly in new project.
I tried using all the posible import methods including DV, Hard drive, memory and so fourth. I tried all the camera and file methods and set them to 16:9 and still no lluck.
I noticed as soon as the images for the clips apear in the project section they are 4:3. However thinking they must be rendered to show as 16:9 I did that but to no avail.
Am I missing something? How do I get them into PRE-8 and have it show the widescreen format?
Thanks

I have actually solved the problem - I went to one of the other discussions on this page and did the following:
In Edit - right click on the file (or clip) go to Interpret Footage and selected Pixel Aspect Ration for PAL 16:9 widescreen.
I have since changed all the files, exported my movie and it works perfectly!
Thanks for your help - I'm sure I'll will be returning with other issues.

FCP project not the correct aspect ratio when exporting to Quicktime

Hello All;
I am trying to export a FCP project in its native resolution (1440 X 1080) to Quicktime but everytime I try, the aspect ratio is messed up and people look taller and thinner than they should.
The project is a resolution of 1440 X 1080 as determined by examining the sequence settings in FCP.
I configure quicktime (see below) to a resolution of 1440 X 1080.
So why isn't my Quicktime video the correct resolution when I play it with the IMac's Quicktime player ? I shrink the player to 1/2 size to fit it all on the screen.
My exact settings are below ...
Export - Using Quicktime Conversion
Format - Quicktime Movie
Video Settings - Compressor - MPEG-4
Quality - Best
Not sure if I changed the framerate - if I did, I probably changed it to 29.97
I didn't touch the other settings in the video settings - left them to default
I didn't change the filter settings - I left them at default
Size - 1440 X 1080 (The actual resolution of my source video)
I checked the box - preserve aspect ratio using letterbox (If applicable)
Other settings were left at default
Sound Settings - Format - AAC
Rate - 48 KHZ
Render Settings - Quality - Best
Target Bitrate - 128 KHZ (This was left at default - I did not change it)
Prepare for Internet Streaming - Fast Start checked (This was default - I did not change it)
All other settings not specifically mentioned were left at default.
Thanks. Tim

I don't have much of an answer for you, but to test try not checking the preserve aspect ratio. Rather than reexport the entire 1 hour just export 10 seconds so that you can trouble shoot different things.
Hope that helps a bit,
Eric

Aspect ratio when exporting full quality -- is this a bug?

Hi,
I'm new to iMovie. I'm really enjoying playing around with it and think it's a really nice tool and very intuitive. But there's one thing that is bothering me. I'm working with 16:9 aspect ratio (Widescreeen) as the project type which corresponds to how the movies were recorded (a Canon MVX4i or Optura 600 in the USA I think). Everything works fine until I try to export in full quality format (using Export). The .dv file only plays back in 4:3 aspect ratio. I tried using the Expert settings, with 16:9 set and both PAL and NTSC but QuickTime and Preview still only see the movie in 4:3 aspect. If I understand correctly, the aspect ratio is just a flag that is set somewhere.
Is this a bug or am I missing something? I don't have QT Pro by the way?
One more question: in expert settings for DV Export settings, does anyone have a recommendation for what I shold pick for DV Format, and Scan mode?
Thanks very much in advance,
David
Powerbook G4 Mac OS X (10.4.4)

Hi David,
This isn't entirely unique to DV. But in simplistic terms what happens is that the widescreen footage that you capture with your camera is the same resolution as square screen. The number of pixels (the dots that make up the picture) for PAL, which is the format used in Portugal I believe, is 720 x 576.
The pixels are squashed into a kind of oblong shape but then when played on widescreen kit the pixels become square causing the picture to stretch sideways. When you view the footage in QT it simply shows the picture as is - meaning that it outputs the picture as 720x576 with the oblong display.
However, when you view the footage in iMovie there's a flag in the file that tells iMovie that the footage is wide and therefore to stretch it accordingly.
There's a differing opinion of whether this display difference in QT is a bug or a feature. As Dan says, if you want to display widescreen footage in QT you're better off exporting a widescreen QT movie using the expert settings:
From within iMovie...
- Select File --> Export from the menu
- In the Quicktime section choose Compress Movie For "Expert Settings"
- Click the Share button
- In the save dialog box that pops up Select "Movie to QuickTime Movie" in the Export section
- Click Option...
- In the Movie Settings dialog box click on settings
- Select DV - PAL from the compression type
- Keep the Frame Rate at Current
- In the Compressor settings choose your Quality
- Set the scan mode to Interlaced
- Set the Aspect Ratio to 16:9 ( this is the bit that tells QT to play in widescreen)
- Click OK
- In the sound section click the Setting button
- In the sounds settings dialog box set the Format to Linear PCM
- Set the channels to Stereo (L R)
- Set the Rate to 48.000kHz
- Set the Sample Rate Converter settings to Quality Normal and the Linear PCM Settings to a sample size of 16 bits.
- Uncheck all the other options (Little Endian, Floating Point and Unsigned)
- Click OK
- Uncheck the Prepare for Internet Streaming box
- Click OK and set a destination for your file.
- Click save to compress the file.
The resulting file that is created above should now show in QT as widescreen. However you should bear in mind that you should work off the raw DV file rather than this new created one in iMovie. As a rule of thumb you should be thinking a little bit about the output media of the file. So for example if your final output medium is DVD then you can continue to work in iMovie and iDVD without problem. If you want to create a QT file for viewing on your computer then it's advisable to create a seperate QT file for this pupose.
If you'd like to know a little more about the way aspect ratios works here's some links for you:
Wikipedia
World easiest explanation of anamorphic 16:9
Hope this makes a little more sense now and sorry if I've covered stuff you already know. Hopefully this information will be of use to you but post back if you need more help.
Cheers.
David.
PowerMac G4 Dual 1.25Ghz / 1GB RAM Mac OS X (10.4.5) PowerBook 12" 1Ghz / 768MB RAM

Aspect ratio when exporting to DVD

Newbie - forgive me but have been struggling with this one for days.
Have a project - 5 min film - in FCP X and really struggling to export it to DVD using the share command - it will copy fine but the original is in 1920 x 1080 and the DVD share option automatically selects to burn at 720 x 576. Inevitably the output is skewed and the altered ratio means that there is lost image around the edges.
I need to have this project outputted onto DVD.
I have tried exporting via the Blue Ray option and using the DVD disc option instead of the 'Hard Drive (Blu Ray)' option under Settings/Output Device but although this process seemed successful the DVD would not play on either a DVD player or Blu Ray Player.
Is there any way of exporting direct to DVD in 1920 x 1080 or similar locked aspect ratio (eg 1280 x 720 etc) or of altering the default output setting for DVD sharing?
I don't have compressor, I don't have DVD or Blu Ray burner software and surely FCP X can do this?
I have altered the format of the original file into various aspect ratios but irrespective, the output ratio is always the same incorrect ratio of 720 x 576.
In anticipation of your help, thank you and please keep your answers in plain language - am new to FCP X and macs!
Thank you
LizW

Taht's really puzzzling. Could you export a short section of your video as a Master File and open in QuickTime – and post a screen shot of the Movie Inspector Report?
Here are some screen shots of a 1080 PAL video. I have chosen a slide show with 3:2 images to emphasize the circle shape and the rectangle that extends to nearly the width of the frame.
I then export as Share>DVD. Note the 720X576 frame size bottom left.
Here, I have opened the VOB file after export in VLC (DVD PLayer will not support a screen shot).
As you can see the circle shape is not distorted (so the anamorphic data was read correctly). Nor is anything cropped in display – since the entire rectangle is shown and the width of the black bars is unchanged.
Russ

HDV Aspect Ratio and Exporting For the Web

INTRODUCTION
I am trying to export an HDV video for the first time and have managed to confuse myself. I want to upload it to blip.tv and they transcoded videos into Flash with 4:3 aspect ratio. But more than that, I want to understand how this all works so I don't have to guess about the settings that will give me what I want.
BACKGROUND DATA
4/3 is 1.333...
16/9 is 1.777...
1440/1080 is 1.333... (if the pixels are square)
1920/1080 is 1.777... (if the pixels are square)
In FCP my clip format says:
Frame Size: 1440 x 1080
Pixel Aspect: HD (1440 x 1080) (Does this mean the pixels are 1.333... times wider than it is high?)
EXPORT USING QUICKTIME CONVERSION
When I go to export this clip using Quicktime Conversion under the Options... Size... dialog and look at the Dimensions dropdown, (I assume this is the dimensions of the exported video. Is that correct?)
Some of the settings are (the settings are in quotes, my notes are in parentheses.):
"HD 1440 x 1080 16:9" (if pixels are square this is 4/3)
"HD 1920 X 1080 16:9" (if pixels are square this is 16/9)
So both of these settings claim to be 16:9 but they both can't be true unless they have different pixel aspect ratios (which I find hard to believe). This makes me think I don't really know what they mean when they notate something as 16:9. Can anyone give a definition that will help me here?
EXPORTING FOR THE WEB
Using FCS2, what settings should I use to export this clip undistorted for the web (with letterbox if needed)?
Thanks for the help,
Rob:-]

What I find with HDV 16x9 1440x1080 footage, is that when you output for the web you have to hard code the size you want the result to be. 320x180 or 640x360 for example scale things nicely. If you want bigger, just do the math.
I don't know why but whenever I select a predefined output size, it always screws it up (I don't work with 4:3 ever, so I'm speaking only of 16x9). So I always enter the size I want.
And as far as Compressor 3, I really can't get that to set the size I want correctly either. Mostly its due to me being lazy and not wanting to spend a year reading the Compressor manual. A package that should basically have the easiest interface known to man is now so complicated that unless I have to hand-holding tutorial, or get to drag/drop one of their presets, I end up screwing things up with it. Not to mention that you get to wait for hours just to see how you screwed up the settings of your output.

Aspect ratio and exporting help, PLEASE!

I've been given a project that was shot on DVCPro HD tapes. The footage was already loaded onto a drive for me. When I bring the clips into FCP, they are 1920x1080 and appear squished in the viewer and canvas. If I click "anamorphic" in the sequence settings, the footage no longer looks stretched.
Great. Now, I need to export the footage to QTs that are a random 620x349, and the client doesn't want the images letterboxed or with bars on the side... they'd prefer that I just crop the images to that aspect ratio. It's for the web.
How can I do this? Everytime I export, I'm getting bars on the sides or a squished image. Thanks for your advice!

That's DEFINITELY not DVCPro HD settings are you SURE they match the clips? AND 1920x1080 is NOT anamorphic.
Also, how are you getting letterbox? Your sequence settings are 16:9 - not letterboxed.
Patrick

Distorted aspect ratio of exported WMV clip

This is truly bizarre. If I output from the timeline using Quicktime Conversion to a WMV file, the aspect ratio is wider than when I output to a Quicktime format. This also happens when I export to the AVI file type.
Any clues?

****! That didn't help. I just tried every combination of pixel dimensions and frame size I could and nothing helps. No matter what, the clips are still exporting as too wide.
I think I'll be exporting as 640x480 after all. I can't figure a way around this.
Thanks for your help.

25 Sony 8mm old Home videos importing as ntsc best import/export settings

I have 25 Sony 8mm old Home videos some over 20 years old importing as ntsc with a brand new mac-book pro and FCE 4.0. What is the best import and export settings to save for the future. Quality is important and time and space is not that important but I don't want to get silly considering the quality I am importing.
Thanks for your time.

I have 25 Sony 8mm old Home videos some over 20 years old importing as ntsc with a brand new mac-book pro and FCE 4.0. What is the best import and export settings to save for the future. Quality is important and time and space is not that important but I don't want to get silly considering the quality I am importing.
Thanks for your time.
*((((You will need to convert the analog video to QuickTime using Apple DV-DVCPRO NTSC codec. The normal way to do this is with an analog-digital converter such as the Canopus ADVC-110 or ADVC-300 (not the ADVC-mini). However, if you have a miniDV camcorder that supports analog-digital passthrough then you could use the camcorder as the converter device.)))))*
I was lucky and found a sony camera that I hooked a four pin firewire to a 9 pin (800) to my mac.
*(((Keep in mind that DV video requires about 13GB per hour. If your 8mm tapes are all 120 mins (2 hours) long, you will need about 650GB to store all the captured video. Sounds like a 1TB drive to me. BTW - Firewire, not USB.)))*
I was thinking 2TB
*(((You need to capture the video in FCE. The proper easy setup is the DV NTSC DV Converter easy setup. Editing will then be done in a DV NTSC sequence.*
*How you export from FCE depends on what you want to do with the finished video. If you just want to burn DVDs, then export to QuickTime Movie. If you want to save the video at its 'full resolution' then also export as a QuickTime Movie. If you want to post to the web, or do certain other things with the finished video, you would export to QuickTime Conversion.))))*
I just want to store it on 2 hard drives one connected to a pogo plug so my family can see them and store the second at my brothers house as the back-up. What would be the best format for that?
Now you know my hardware so should I import the whole 2 hours or batches of like 1/2 hour segments.
Again thanks for your help this is saving me many trials and errors.

Correcting pixel aspect ratio with Publish settings

Same old, I know. I'm designing and producing a
Flash site using a Mac, but it will be viewed on a large
touchscreen (1366x768) driven by a PC. The vectors look fine when
going from the Mac 1.1 pixel aspect ratio to the Windows 1.0
display, but the photos look degraded and squashed vertically.
Could I fix with the Publish settings ... such as html- publish at
100% width, 99% height? I can't test easily because my pc's have
such fuzzy old displays, I can't see a thing. Flying blind. The
only time I see how awful it looks on a good PC display is when I
review the work to the client on the client's own PC...ouch.

In Premiere, you can right click on your footage in the Project Bin. From the context menu, choose Modify then Interpret Footage. In that dialog box, you can tell it to conform the pixel aspect ratio to 16:9.

Aspect Ratio Import Export settings?

Similar Messages

Maybe you are looking for