Aspect ratio problem with original footage.

I use a Canon mini DV camera (MD160) that shoots in widescreen, and I do all my editing in iMovie 08, all projects are Widescreen 16:9.
No problems until now, but I imported footage the other day that came up squashed (pillarboxed) in 4:3 size. The thumbnails are normal size (widescreen), as they always have been, but the preview screen has cropped the footage to make it fit in my widescreen project. So I'm losing some of my shot.
What really messes me up is that this has happened to random pieces of footage from 6 months ago too, but some footage from last week is unaffected. It is NOT THE PROJECT that has changed, but the original imported footage in my event library, which was always widescreen. Even original shots I took with the iSight camera have changed to the squashed format.
And I obviously can't e-mail Apple, so what's going on? Is there any idea out there what caused this? And how do I alter original footage - I don't want to crop, so is there any way to stretch a 4:3 image into 16:9 - if I can, it will look fine, back to normal.

<font color="blue"The thumbnails are normal size (widescreen), as they always have been, but the preview screen has cropped the footage to make it fit in my widescreen project. So I'm losing some of my shot.</font>
The thumbnails use the current embedded "scaled" dimensions to create the aspect for the thumbnails. On the other hand, the project ignores the current dimensions and uses the embedded aspect flag to set preview display and export/share output.
If you then "move rejected clips to trash", it deletes the bits you don't want, but then converts the remaining section into a "mov" file. This is what has been happening to my footage. So basically I can't get rid of extraneous footage (60GB+ of the stuff!) without altering the aspect ratio of my movie. How do I stop this happening?
Thanks for posting this information. It seems that when the "kept" file segments are copied to the new file container, the aspect flag is not copied. Believe this should be brought to Apple's attention ASAP as an enhancement (or a bug since it does not adhere to aspect flag priority use in main routines). Will run my own test to confirm this and likely post my own feedback report. Suggest anyone else having this problem add their support to get this corrected as soon as possible.

Similar Messages

  • Aspect Ratio Problem with Onlining

    Hi,
    I checked the old posts and couldn't find an answer.
    I'm using Ken Stone's article to online my project. I followed the instructions except for the point right after the new online file is created and just before you capture footage. He says to change the Audio/Video Settings to go from Capture Preset (DV to OfflineRE NTSC (Photo JPEG) to DV NTSC 48 kHz). I did that. I also changed the Sequence Preset (which wasn't mentioned in the article) from Offline RT NTSC (Photo JPEG) to DV NTSC 48 kHz.
    When I captured the full-res footage, the clips were squeezed to look more widescreen. The image hadn't been cropped, just stretched.
    These are the sequence settings for my offline project:
    Frame Size: 320x240 Multimedia Large (4:3)
    Pixel Aspect Ratio: Square - (Anamorphic 16:9 box not checked.)
    Field Dominance: none
    Editing Timebase: 29.97
    Quicktime video Settings
    Compressor: Photo - JPEG
    Quality: 35%
    These are the sequence settings for my online project:
    Frame Size: 720x480 NTSC DV (3:2)
    Pixel Aspect Ratio: NTSC- CCIR 610/DV(720x280)- (Anamorphic 16:9 box not checked.)
    Field Dominance: Lower (even)
    Editing Timebase: 29.97
    Quicktime video Settings
    Compressor: DV/DVCPRO - NTSC
    Quality: 100%
    I filmed the original footage on miniDV (NTSC) with a Canon GL2 3CCD camera. The footage was onlined with a Sony DCR-HC32 1CCD miniDV (NTSC) camera. I'm using FCP 5.0.4 on an apple powerbook g4. OS 10.4.8
    I'm sure the solution is something small that I'm missing. Thanks a lot for any help!

    Hey you might have already done this but check the settings of the new clips not just the sequence. Right-click on one of the affected clips in ur browser then go down to item properties-> format and see if the anamorphic option is ticked on these. Hope this helps,
    Howard
    G5 iMac 20inch, Macbook   Mac OS X (10.4.7)   FCS 5.1, 500GB External

  • Aspect ratio problem with AVCHD in iMovie 08

    I am importing footage from a Panasonic HDC-SD9 into iMovie 08. the footage gets in there fine and looks great EXCEPT that the footage (all shot in 16:9) is squashed a little bit. in the preview clips below, it looks fine, but in the player above (and if I export it as a Quicktime file) it is squashed slightly. there are black bars above and below the footage, and (I'm guessing) were the video stretched to fill the entire area, eliminating the black bars, it would be the correct aspect ratio. I've tried importing footage form the camera supposedly shot in 4:3, and the same thing happens.
    I know that I can simply do a quick edit in imovie, export it, import it into final cut pro, and stretch it back. however, I'm worried about losing quality, and more importantly, I don't know the exact ratio, since I can't even figure out what imovie is doing to the video to make it squashed, let alone in what manner.
    the footage from the HDC-SD9 is AVCHD, and I understand there is something about square pixels vs. rectangular, but I don't know much about it. I have tried every iteration of imovie's limited aspect ratio settings, and I can't get it to work. I know it's meant to work well with AVCHD, so I'm assuming I'm missing something fundamental and simple. (some box to check to let imovie know I'm importing AVCHD?) it's maddening to see the footage correctly in the thumbnails, but squashed for (seemingly) no reason in the playback. can you help me out? otherwise I am going to film myself holding something that is a perfect square, then import it to imovie, then export to quicktime, then import the quicktime file into finalcut, then stretch it til the rectangle becomes a perfect square, and write down the settings for the future. seems ridiculously complicated, especially for the mac world.
    I love imovie 08 (seriously, some of the new toys are just so amazing, and no render time at all!), and I love this camera. please tell me they can get along!

    I think I'm having a problem similar to this. I'm using a Sharp MiniDV camera, and shooting in 16:9. When I used to import to other versions of iMovie it worked fine, but w/ iMovie 08 it is squashing and stretching the incoming video to more like 20:9 (I have no idea what the actual ratio is, this is just a guess). I tried changing import to PAL 25fps, but that didn't do any thing. Any other suggestions?

  • Aspect ratio problem with consumer camera and Premiere Elements 11

    Hello everyone - I'm Steve. I'm new here. I do still photography on a pro level, digital and analog, but I am an absolute dummy with video...but then, I don't want to do much, just rudimentarily cut a few family videos, upload them, etc.
    However, I can't get Premiere Elements 11 to output my self-shot clips in a correct aspect ratio.
    My camera is a consumer-model Canon Legria FS200. I shoot video in a resolution the camera calls XP. The camera says they are 16:9, the camera monitor shows them as 16:9, and when I use the software (called Pixela Image Mixer) that came with the camera to import the clips to disk, I get mpg files that Windows (7) Explorer says are 720x576 pixel, and that VLC player correctly displays as wide-screen 16:9 without me having to tweak its display settings.
    However, the moment I import them into Premiere Elements, they appear horizontally squeezed, and I can't seem to output them any other way, with or even without editing them in Premiere. 
    I tried to use the recipe given here: https://forums.adobe.com/message/5987538#5987538 , (replacing only NTSC with PAL because I'm in Germany),  namely, setting the project preset set manually for PAL/Hard Disk etc/ Widescreen 48kHz and check force selected program settings. But no matter, Premiere displays the video in horizontally compressed form, with large black bars to the right and to the left.
    On the export side, setting the output to PAL DVD Widescreen and setting the Pixel Aspect Ratio in the output settings to Widescreen does not help, either. Neither can I force VLC player manually to display the correct aspect ratio. BTW, audio is perfect all along.
    This is about as far as I can see myself getting without help. Has anyone any idea?
    Thanks a lot in advance,
         Steve, from Germany

    Steve
    I see that you are now in the Adobe Premiere Elements Forum with your problem already solved.
    I did not see any Why for what you encountered, so I thought I would give you my take on this.
    Your Canon FS200 gives video with MPEG2 video compression with a .mod file extension. That .mod file extension can be found in use with some Canon as well as JVC cameras. The .mod file history with Premiere Elements (any version) is problematic. In some instances, the user needs to rename the file extension from .mod to .mpg before it can be imported, but not always. But, the .mod widescreen comes packaged with the aspect ratio dilemma, presenting as 4:3 rather than 16:9. The classical argument is whether Premiere Elements does not recognize a .mod file's 16:9 flag or whether the 16:9 flag got lost.
    There used to be a utility contributed by an user to handle the file extension and/or aspect ratio issues. Now, the general fix is to import the file into Premiere Elements (in your case 11) with Add Media/Files and Folder/Project Assets. And in Project Assets, you right click the file, select Interpret Footage, and go to the Pixel Aspect Ratio section of the Interpret Footage dialog where you
    (a) dot the Conform To:
    and
    (a) set the Contorm To: field to (in your case) D1/DV PAL Widescreen 16:9 (1.4587)
    Once you are in the program and have the file on the Timeline, if any black edges, you can click the monitor to bring up the image's bounding box. Then drag on a bounding box handle to scale the image just to the point where the black edges are gone.
    If you ever need the Adobe Premiere Elements Forum, maybe bookmark this link
    Premiere Elements
    You should expect to have this issue with any .mod widescreen file that you obtain from your Canon FS200 camera.
    ATR
    Add On...If you are depending on the program to set the correct project preset, you may want to check into what it is setting based on the properties the first file you drag to the Timeline. A manual setting of the project preset may be in order. Please see
    ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting

  • Aspect Ratio Problems with iDVD

    I am putting together a video presentation with video from several different sources.  I have had a whale of a time getting the video to display uniformly at the same aspect ratio.  I put all my separate clips into Quicktime Pro and set the aspect ratio to 960 X 540.  FINALLY, in Quicktime Pro I was able to assemble the full video so that ALL the footage played in 960 X 540 and looked seamless.  I thought I was in great shape.
    Then......I thought I would test the video in iDVD because I need to burn about 40 copies of this presentation.  Lo and behold, iDVD takes part of the video footage and somehow changes the aspect ratio of certain footage.  Part of the video plays in a small postage stamp area in the upper left of the screen, while other segments play in full widescreen just fine.  Obviously, my aspect ratios are still messed up somehow, even though the the entire video plays in full 960 X 540 glory in Quicktime Pro.  I'm stumped.
    Anybody run across this problem in iDVD before?

    Wow, nobody qualified to help me with this problem?
    I'm finding out, thanks to more research on my part, that iDVD does not like the aspect ratio of 960 X 540.  The only reason I used that setting is because part of of my video has an iMovie 9 "trailer" and iMovie 9's "large" export is set to 960 X 540.  The weird thing is iDVD handles segments of my video that is 960X540 just fine, but it completely bungles up the iMovie 9 trailer segment that is 960 X 540.
    I have also found in further testing that iDVD does like a .move file in 853 X 480 and displays that aspect ratio in full widescreen glory.
    Hopefully this information will help somebody someday avoid the headaches I have had.

  • Aspect ratio problem with Quicktime Conversion from FCE HD 3.5

    I have a FCE 3.5 HDV project (16:9 aspect ratio) which I am trying to export using Quicktime Conversion for eventual web-streaming. I have tried various settings including "maintain aspect ratio" and the "letterbox" options. After every multi-hour attempt, the end result is just what I need, except the aspect ratio is always 4:3 and vertically squeezed.
    What settings should I use for a small to medium sized version of my movie for streaming on a website, but in the correct aspect ratio? I'd prefer a 16:9 Quicktime frame, or at least a 4:3 Quicktime frame with black bars.

    I too have been having some problems, same software. Export to iPod completely ignores the intended aspect ratio and is non-adjustable and squeezes the footage. It looks fine on the canvas but gets messed up on export. A 4:3 video that should be 640x480 ends up being 640x426, and a 16:9 video that should be 640x360 looks to be getting 640x426 as well.
    Currently, my work-around is to export to DV file, then export to iPod. Being a double encoding, it is quite wasteful in terms of time and processing power. Is there something else I can do?

  • Aspect Ratio problem with Premiere Elements 10

    I had old super 8 cine film transferred to video for me in December 2011 and put
    it onto a Blu Ray disc as AVCHD files.
    The disc is copied onto my computer and displays in the correct 4;3 aspect
    ratio on the Desktop and plays correctly in VLC media viewer.
    I have Adobe Premier Elements 10, but the video is “squeezed” narrow, e.g.
    a circle displays as an oval in Monitor, Timeline and Sceneline views.
    When I save the work to a disc it is also “squeezed”.
    Pictures/footage from my Sony AVCHD video camera display correctly on the
    Desktop and I have not had the above problem when editing it in Premier
    Elements 10. I have also edited 4:3 photos and 16:9 video aspect ratios together into
    without problems
    I would be grateful (and relieved) if you can tell me how to fix this
    please.

    Thanks to people who showed an interest and replied.
    Thanks especially to Kevin at digitacopycat who pointed me towards a workable solution within a couple of hours of posting the problem.
    ASPECT RATIO
      1.  Open Premier Elements 10
      2.  Select and load the folder you wish to work on
      3.  In the Tasks Panel, click and open Project
      4.  Right click-on your folder
      5.  From the drop down menu select Interpret Footage
      6.  Choose Pixel Aspect Ratio and click-in the circle next to Conform to.
      7.  Click-on the down arrow to open the drop down menu
      8.  Select and click-on HD Anamorphic 1080 (1.333)
      9.  Click ok
    10.  All clips in Monitor Panel, Sceneline and Timeline change to the correct Aspect Ratio
    11.  Render the clips to maintain their correct Aspect Ratio

  • Aspect Ratio problem with DVD output

    I have a FCP sequence that I have output as a self contained QT movie. The film was shot 16:9 HD, 1080i/60
    I have processed this with Compressor, using the SD DVD setting for 90 mins (the film is 8 mins) because the client wants an SD DVD, not an HD DVD, even though the film was shot in HD.
    I then take the Compressor output and import that into DVD Studio Pro. I set the display mode for the track as 16:9 and in simulator select display mode.
    The problem is when I output the DVD, I have two non 16:9 televisions to test it on.
    On one, which can switch between wide / original / 4:3 the only setting that looks normal (i.e. not squeezed or stretched or cropped) is the 4:3 setting. Yet this is a 16:9 film.
    On the other 4:3 television, with no ability to switch between wide / original / 4:3, the image fills the screen but is stretched vertically (I would have expected letterboxing and wide screen image, as when I play a commercial DVD film on this television).
    How can I output a SD DVD in 16:9 from this project?
    Thanks in advance!

    Thank you this was very helpful. I had NOT in fact set the preferences ofr 16:9 encoding. I have now burned another DVD having made this change.
    The result is better in that there are now two settings, original and 4:3 that work on one of the televisions I am testing on. Previously, the only one that worked correctly was 4:3.
    I am still puzzled why I don't see the output as widescreen with black bars only at top and bottom. (I see it with black border all around. Though the image is not distorted.
    Can this have anything to do with the fact that I am going from an HD format in Final Cut sequence to an SD DVD?
    Thanks again!

  • Still no fix for aspect ratio problems

    I was hoping this new version would fix the aspect ratio problems with importing clips other than in the DV codec, but alas, it was not to be.
    My problem is that if I import a clip that is 720x486 (non-square pixels, uncompressed), iDVD doesn't interpret it correctly. It places the clip with small black bars (like a little letterbox) at the top and bottom of the screen, then scrunches the image vertically, sprinkling it with stairstep artifacts.
    What's frustrating is that versions up to iDVD 4 didn't have this problem and imported clips in any codec beautifully. It's been a known issue for a long time.
    Furthermore, Apple's solution is to convert the clip to a self-contained DV movie (hello, disk space!), which is also undesirable because of the quality loss and poor colour compression. After the latest QuickTime upgrade, exporting in DV doesn't work, creating a clip that is half-field and blocky.
    Argh! This is a real problem because many of us use iDVD to make screeners for clients, and it looks unprofessional. It's also a very inaccurate and somewhat useless tool when the clips are of clean lines, titles, and smooth, solid graphics, which show the stairstep effect the most.
    I'm at my wit's end having exhausted all other suggested solutions (and please don't tell me to use DVD Studio Pro instead). Anyone else come up with a fix or have the same issue?
    Previous discussion on this issue here: http://discussions.apple.com/thread.jspa?threadID=204675&tstart=0

    Sorry, but the answer is - for professional use, use
    DVD SP
    No, it is absolutely not the answer. EVERYONE I know in my circle of professionals uses iDVD for banging-out quick screeners of TV spots, film clips, dailies. In fact, it's one of the main reasons they added OneStep to iDVD. DVD Studio Pro is for authoring commercial-level DVDs, with a learning curve and pricing structure appropriate to that.
    I'm not going to spend time learning DVD Studio Pro just to do quick one-offs, for one, and it's overkill anyway. Not only that, but it costs a lot more than iDVD.
    The inablity to import a QuickTime clip -- on Apple software, no less -- is not cool, especially since it doesn't seem an excessive thing to ask (and it used to encode just fine). It's a very basic task considering everything else iDVD has been written to do, and crosscoding and re-encoding video is a basic functionality in QuickTime.
    I'm not asking iDVD to prove the existence of dark matter in the universe; I'm just asking it to play a QuickTime movie properly. Which is what it's supposed to do.
    There was a work-around, supplied by Apple, but it no longer works for me, so that's why I'm asking what worked for others.

  • H.264 pixel aspect ratio problem after update

    Yesterday I updated Premiere Pro CC and Media Encoder CC to version 2014.2. But now I am having pixel aspect ratio problems with the H.264 codec when I export a 1080i50 sequence to PAL widescreen. The problem also seems to occur with other frames sizes.
    I am using the same settings as usual with Aspect set to: D1/DV PAL Widescreen 16:9.(1.4587). However, VLC and Windows Media Player play the video with a 5:4 ratio. So it looks like the pixel aspect ratio information is not passed to Media Encoder or to the file.
    This problem does not affect other codecs like AVI or MPEG-2, these are correctly displayed.
    Is there anyone else having this problem? And more important, does anyone know a solution?

    When creating files for computer/online playback (not editing), then best practice is to simply use square pixels with 1.0 Pixel Aspect Ratio, which will ensure that ALL players correctly display your video, no chance of problems.
    Export as 1024x576 with 1.0 PAR and that is the square-pixel equivalent of PAL DV widescreen.
    For NTSC users, I've seen it two ways, either 864x480 or 854x480.
    Merry Christmas
    Jeff Pulera

  • DVCPRO HD Aspect Ratio Problem

    Hello, and thanks for looking.
    I am working on a project where the source footage is 1280 x 1080 (16:9) frame size and pixel aspect ratio, (1080i60) with an editing timebase of 29.97 (as would be expected). I tend to work with multiple timelines, such that I keep various drafts of my work intact for later referral. I have noticed that one of my sequences does not have the same aspect ratio as my original sequence (it has frame size: HD(1440x1080)(16:9) and pixel aspect ratio of HD(1440x1080) and an editing timebase of 23.98. This is a problem that I didn't notice until a lot of work went into this draft, as the aspect ratio when viewing in the canvas is the same. Where my question comes in is here: the editing timebase, pixel aspect ratio and frame size are all different than my source footage, and I am extremely concerned because when I copy clips to another timeline with the settings the same as the source footage, they aspect ratio goes wacky and all the people in my footage gain about 50 pounds (to their certain chagrin). How do I copy my timeline that I spent hours working on in the wrong settings into a timeline with the correct editing timecode base and aspect ratio? Whenever I do it, even if I drag a piece of the same source footage in to match the settings when FCP asks me to, the copied in footage from the timeline with the wrong aspect ratio looks (of course) too wide. I would have thought that the footage would maintain its original source aspect ratio. Also, it won't let me adjust the settings in the 1440x1080 timeline to the correct settings for the source. Please help me get timeline fixed so that I don't resort to re-cutting the footage from the original assembly cut!
    Thanks.

    Go ahead and copy everything into a timeline with the correct settings. Find a clip in another sequence (with the correct settings) that looks and behaves correctly. Select this clip, hit command-c. Go to your new timeline, select all (command-a), hit option-v and choose paste all the appropriate attributes. Everything should be adjusted correctly.

  • Exporting 1080i, Pixel Aspect Ratio Problems

    Hello everyone,
    I've been dealing with a lot of different format projects recently: SD, HDV 720-24P, and HDV 108050i.
    For now, these projects are intended for internet delivery. I've not had too much problem exporting the SD and HDV 720-24P projects, but the HDV 108050i has been very frustrating.
    When I export SD and HDV 720 in compressor, I set the pixel aspect ratios to NTSC and square, respectively. But when I try to set the pixel aspect ratio for the 1080i to "1080i 16:9" (which I believe is 1.333:1), it rejects my choice, choosing "default" instead. When compressor finishes exporting, my 1080i movie looks very squished horizontally.
    The only success I have had is in exporting via Quicktime conversion, where I duplicate my compressor settings, but do nothing to the pixel aspect ratio (since there is no option to change it in quicktime, it seems). The movies I have exported with Quicktime have been fine. I don't know if it makes a difference, but when I try to export these 1080i clips, I am in the proper 1080i "easy setup."
    I know almost nothing about this pixel aspect ratio business, but I believe it is the cause of my problems (since I am using the proper 16:9 aspect ratio for movie width x height).
    My Questions:
    1. If I am understanding the problem correctly, how do I get compressor to acknowledge the right pixel aspect ratio for my 1080i footage, rather than the incorrect "default"?
    2. If am not understanding the problem correctly, what might be going on?
    3. Can anyone point me to a useful resource about pixel aspect ratios? I've been searching the forums and online, and I thought I was getting a grip on things but it seems I am still way over my head. For example, what is the significance in Final Cut Pro of changing your viewer or canvas to not show square pixels? Do you need to format for square vs. non-square depending on the final delivery destination (not the source format)?
    Thanks!
    Message was edited by: Haberdasher

    Sorry to bump, but any ideas?

  • PRE7: Aspect Ratio problem even before opening source media file

    Hi,
    I am a newbie in Premiere Elements. Read a lot of threads with aspect ratio problems, but didn't find similar problem to mine, so decided to open a new discussion.
    I am shooting video with Samsung HMX-H105 SSD camcorder, in 16:9 widescreen HD video.
    When I try to make DVD from the MP4 file from the camcorder, it gets skewed even before opening it, when it is seen in the right hand pane with the Media file previews. I am not sure if somebody can understand what I am trying to tell so I have a screenshot of a video that I shot with my camcorder and a video that I have downloaded, shot by someone else with Samsung HMX-H20 in 16:9 HD as well.
    So even when I start a new project in 4:3 and not 16:9 my videos always get stretched. This is why I think that maybe Premiere Elements doesn't understand the aspect ratio of my MP4 video files - it can be seen in the left hand side pane, where I have circled (with white elipse) the black stripes above and below the video.
    Hope that somebody can help with my problem.

    You ROCK
    both of you
    Thanks wine_snob for pointing me how to find the Interpret Footage option.
    And thanks to Steve for solving my problem
    In the "Interpret Footage" and "Pixel Aspect Ratio", the working video says: "Use Pixel Aspect Ratio from File: Square Pixels (1.0)"
    but on my problem video it says: "Use Pixel Aspect Ratio from File: Other Aspect Ratio (1.778)", so I changed it to "Conform to: Square Pixels (1.0)" and now I have perfectly proportinal video for 16:9
    Thank you once again!

  • Problems with Blackmagic footage going to black

    Hello, I am experiencing a problem with my footage dropping out or going to black. It is random. Sometimes the same piece of footage works other times not. Sometimes restarting is enough, but not always. I've trashed the prefs and adjusted memory options, but the problem persists.
    I am on a 2x2.93 GHz Quad_Core Intel MacOS 10.6.4
    with 12GB 1066MHz DDR3 of Memory
    After Effects CS5 v10.0.1.19
    And I'm running off a server.
    Is anyone else having this problem?
    J

    Start up in safe boot:
    Safe Boot
    http://support.apple.com/kb/HT1455
    This forces a disk check called fsck -fy it is similar to repair disk on the disk utility. Once it has started up to your log in screen restart normally and see if that helps

  • 16:9 aspect ratio problem

    Hi,
    I've got a number of QuickTime movies (eg, moving backgrounds) which were saved in 16:9 aspect ratio DV option within QT-Pro.
    I'd opened the original sequence in QT and saved it in 16:9 and it displays OK when played back in QT. The problem Im having is when I import these sequences into, say, iMovie the aspect ratio reverts back to 4:3. This is in spite of the fact that the prefs in iMovie HD are set up to import new files in widescreen.
    Is there a way of converting these files to appear as 16:9 in the project to match all the other footage?
    Sorry if this query seems more akin to iMovie... just wondered if there's a workaround via QT
    Thanks.
    TonyT

    I have actually solved the problem - I went to one of the other discussions on this page and did the following:
    In Edit - right click on the file (or clip) go to Interpret Footage and selected Pixel Aspect Ration for PAL 16:9 widescreen.
    I have since changed all the files, exported my movie and it works perfectly!
    Thanks for your help - I'm sure I'll will be returning with other issues.

Maybe you are looking for

  • Smart Album Keyword Bug

    I have a library of 17,440 "Referenced" photos, grouped across multiple projects, none of which contain more than about 400 photos. Prior to importing these images into Aperture, I had already keyworded all of them; the keywords are embedded within t

  • Where to obtain original manual

    I recently purchased a used Canon 320EX Speedlite. I would like to have an original printed manual in English. I do have the .pdf copy but I would like the original to carry with my other manuals. If anyone can point me in the right direction I would

  • WIP not cleared after TECO and KKAX run

    Hello all, I am facing a problem in clearing the WIP. The process order is of 11600 kgs,Delivered is 11681kgs.User confirmed qty for 11600 kgs and later issued the 81 kg through MB31. I made the order TECO and run transaction KKAX.Still it shows WIP

  • How do remove profiles in iOS 8

    there is no remove button

  • Exchange send connector

    might be i am going to ask funny question , i am creating new send connector ,use domain name system(DNS)''MX records to route mail automatically .....it seems hidden i am not able to select