Aspect Ratio Trouble

I recently upgraded to QT 7 (up to 7.0.2) and now my Final Cut Express (2.0.3) produced videos are coming out stretched to a 16:9 ratio vice the 4:3 that they were shot and edited in. It's not happening with all my exported (to QT) videos, but most of them. I noticed that four of six that I exported to burn onto a single DVD disc were stretched, but two weren't.
I thought the problem was due to a change in Toast Titanium 6, but their tech support said this a "known issue" with QT 7. They had two workarounds. One was to use "Compressor" to export the video and put that directly to a disc using Toast or switch back to QT 6.5.
Anyone have a better idea? I currently use FCE 2.0.3 and it doesn't have Compressor.
Thanks.
Bob

More info:
I did the QT 7.0.2 to 7.0.1 rollback, but can't roll back to 6.5.2 since I already upgraded to Tiger...frustrating. Everything was working nicely and I had to screw it up by upgrading.
Regards,
Bob

Similar Messages

TROUBLE WITH ASPECT RATIO

USING PE7. CAM 1 AND 2 SHOT WITH 16/9 RATIO. THE CAPTURED IMAGES FROM BOTH
CAMERAS DISPLAY EXAGGERATED WIDTHS, EVERYBODY LOOKS 50 LBS FATTER THAN THEY ARE. I'VE TRIED CAPTURING IN 3 OTHER PROGRAMS-SAME RESULT.
CAM 1 IS A CANON GL2. IT COMPRESSED THE IMAGE DURING RECORDING TO FIT A 4:3.
THE EDITING PROGRAMS "SEE" THE 4:3 AS A 16/9 COMPRESSED FORMAT AND AUTOMATICALLY DISPLAY 16:9.
CAM 2 IS A 2007 HITACHI HD. IT DEFAULTS TO A 16:9. LOOKS GOOD ON THE ON-BOARD SCREEN WHEN SHOOTING BUT ON PLAYBACK LOOKS FAT ALSO.
I DUMPED THE FILES ONTO A DVD TO TRY ON THE TV. SAME FATS. WHEN I CHANGE THE ASPECT RATIO ON THE TV MONITOR TO FORCE THE 16:9 BACK TO 4:3, THE LATTER SETTING LOOKS ABOUT RIGHT, NOT TOO SKINNY, NOT TOO FAT. THE PROBLEM IS THAT NOT EVERYBODY HAS A TV THAT CAN ADJUST THE AR AND THEY WOULD PROBABLY JUST THINK THAT THESE PEOPLE ARE ALL ON HIGH-CALORIE DIETS.
WHAT DO I DO NOW? I NEED A PROGRAM THAT I CAN ADJUST THE ASPECT RATIO TO GET EVERYBODY'S WEIGHT REDUCED FAIRLY.
IS THERE ANYBODY OUT THERE THAT CAN HELP?
HOWIE
[email protected]

If you have recorded in widescreen you need to work in a widescreen project. Did you select a widescreen project preset at start up?
If so and you still have the problem then the other thing to look at is to right click on the clip in the project Media Bin and select Interpret Footage. Then in Conform To select the appropriate widecscreen preset.

Having trouble with aspect ratio when compressing DVCPRO HD footage to QT

I have a 35mm film (1.85-1 aspect ratio) converted to 16/9 DVCPRO HD. When I compress it to Mpeg2 for DVD, it looks great, holds the correct aspect ratio. But when I choose a setting for the web, a small Quicktime file, it stretches the image ever so slightly. Not sure what the problem is. Thanks for the help.

Hey Lodgeboy,
without knowing the settings you are using, it is difficult to help, but i will try to answer as best i can:
if you are using web-presets, make sure you crop the matte, NOT resize the file.
Basically, instead of letterboxing OR creating am anamorphic MPEG2 for DVD (still in the 720x480 space) you would first crop the mattes off and then resize.
In the case of a web-file, it doesnt matter what order you process the file, EXCEPT if its for IPTV.
Without knowing details about what your final deliverable is, the source and the settings, this is as much as i can help you.
Mikey M.

Trouble with DVCProHD 16x9 aspect ratio in iDVD

I'll probably get flamed for this, but I've scoured the discussion boards and read thru the manuals and I just cannot figure out what the problem is or find the right answers. Okay...
I shot a short with the Panasonic HVX200 in 720p24PN. I cut the film in FCP 5.0.4 and would like to export it to make a DVD with iDVD 5.0.1. (Note: this is not the final version of the film I'm going to be making. I simply need to make a copy of my rough cut to give to my composer). I exported a Quicktime movie using the "current settings" and unchecked the "make movie self contained" box. I created a project in iDVD, dragged the QT movie in and burned it. When played on my computer and my DVD player displayed on my 32" HD widescreen TV, I get small bars on the right and left and the image is squeezed giving it a squashed from the sides picture. So my first question is, can iDVD 5 create a DVD from this source material and maintain the proper aspect ratio (16x9) or is the software too old? In other words, would I have to upgrade to iDVD 8? Or am I missing a step in the process that fixes this? Or is it a case of a plain QT movie not being the proper tool? Do I need to export it using QT Conversion or Compressor and make the aspect ratio custom? I have messed around with this and I don't seem to be getting the magic numbers here. I have a feeling I have the right applications, but I'm mixing and matching the wrong ones to achieve my goal. I know the people I'll be giving the rough cut to will view them on widescreen TV's so I'd love for it to play in full 16x9 for them.
Thanks in advance for your help!

I didn't really feel it was a specific iDVD question since so much of the work begins and involves what you do in FCP first. I posted the question in that forum as well, but I'm just wondering if this is a common situation or rare. Doesn't seem like it would be a rare situation, but that's why I'm asking. Is what I'm trying to do too advanced for a "consumer" grade program like iDVD. And that's not meant as a slam on the program. Anyway, enough about me. What about me?

How do I automatically scale a layer to fit a canvas while maintaining the original aspect ratio?

I'm currently tasked with reformatting 3,000 product images (thumbnail, normal, and large sizes for each) for a new online store. To do that, I'm trying to create a Photoshop (CS6) action that can automate the process as much as possible because I have a hard deadline and not a lot of time to get it all done. Where I'm running into issues is scaling the images automatically once I've used File-->Place. My canvas sizes are all square (670px X 670px, 250px X 250px, and 125px X 125px), but the product images I'm placing on the canvases are almost always rectangular with the height greater than the width at about a 2:3 ratio. I need to scale them so that the image is touching the top and bottom edges of the canvas and the width is adjusted accordingly with the image centered horizontally.
I found the program below on another thread, but it's not working exactly like I need it to. It mentions "maintain aspect ratio," but when I run it, the image I'm trying to place ends up getting stretched to fill the entire canvas rather than the width adjusting to the height once the height has reached its maximum. I have no experience with JavaScript, so I'm having a difficult time adjusting the code to meet my needs. Any help would be greatly appreciated since I am a writer who is WAY out of his comfort zone.
var maintainAspectRatio;// set to true to keep aspect ratio
if(app.documents.length>0){
    app.activeDocument.suspendHistory ('Fit Layer to Canvas', 'FitLayerToCanvas('+maintainAspectRatio+')');
function FitLayerToCanvas( keepAspect ){// keepAspect:Boolean - optional. Default to false
    var doc = app.activeDocument;
    var layer = doc.activeLayer;
    // do nothing if layer is background or locked
    if(layer.isBackgroundLayer || layer.allLocked || layer.pixelsLocked
                            || layer.positionLocked || layer.transparentPixelsLocked ) return;
    // do nothing if layer is not normal artLayer or Smart Object
    if( layer.kind != LayerKind.NORMAL && layer.kind != LayerKind.SMARTOBJECT) return;
    // store the ruler
    var defaultRulerUnits = app.preferences.rulerUnits;
    app.preferences.rulerUnits = Units.PIXELS;
    var width = doc.width.as('px');
    var height =doc.height.as('px');
    var bounds = app.activeDocument.activeLayer.bounds;
    var layerWidth = bounds[2].as('px')-bounds[0].as('px');
    var layerHeight = bounds[3].as('px')-bounds[1].as('px');
    // move the layer so top left corner matches canvas top left corner
    layer.translate(new UnitValue(0-layer.bounds[0].as('px'),'px'), new UnitValue(0-layer.bounds[1].as('px'),'px'));
    if( !keepAspect ){
        // scale the layer to match canvas
        layer.resize( (width/layerWidth)*100,(height/layerHeight)*100,AnchorPosition.TOPLEFT);
    }else{
        var layerRatio = layerWidth / layerHeight;
        var newWidth = width;
        var newHeight = ((1.0 * width) / layerRatio);
        if (newHeight >= height) {
            newWidth = layerRatio * height;
            newHeight = height;
        var resizePercent = newWidth/layerWidth*100;
        app.activeDocument.activeLayer.resize(resizePercent,resizePercent,AnchorPosition.TOPLEFT);
    // restore the ruler
    app.preferences.rulerUnits = defaultRulerUnits;

Hum Im not sure Im getting you here… Have you looked at Image Processor…?
Why are you NOT just using Fit Image and canvas size in your actions…?
These are all built-in to Photoshop.
If you wanted to do all 3 sizes in the 1 fly-bye then use script to process…
If you need extra file naming conventions then script would probably be best…
All of the above should have NO trouble handling your 3k files…

Aspect Ratio issues getting 16:9 to look right, what is the best workflow?

Hi all,
I am having trouble getting my 16:9 footage to look right when I export, especially when playing on DVD. I shot the footage with a Sony HDR-HC1 which apparently shoots in 16:9 anamorphic. Originally when I imported the footage it appeared it the FCP viewer and canvas in 4:3 letterboxed form, the image did not look squeezed or stretched but appeared with black stripes on top and bottom.
I have tried several experiments with exporting this footage to dvd with the following results:
Using Compressor with 4:3 setting in export:
DVD Studio Pro track settings to 16:9 looks extra squashed vertically
DVDSP track settings to 4:3 image looks in proper aspect ratio but displays with black stripes on all 4 sides.
Using Compressor with 16:9 settings in export gives the same results.
In conclusion, if it appears in 4:3 letterbox in FCP viewer and canvas there is no way to get it to export and display in DVD with proper 16:9 aspect ratio.
I have also done some experimenting with re-capturing some of the footage from the tape.
For one sequence I recaptured the footage and it displayed in 4:3 without the letterboxed effect (filling the whole screen) but appeared squeezed, I am guessing that this is because of the anamorphic nature in which my camera captures the footage. No pixels were missing. In the FCP viewer and canvas it looked squeezed and did not display in the correct aspect ratio, however when it was exported via Compressor in 4:3 and then in DVDSP Track Settings put to 16:9 Letterboxed, it is displayed perfectly (letterboxed vertically, the image filling the width of the screen without the extra stripes on the sides).
So I thought that I had my solution here, although that did involve re-digitizing and batch capturing all 18 tapes used in the project, so its not exactly a quick fix.
This is where it gets a bit confusing. In order to understand where I had originally gone wrong in my workflow I did some more experiments, this time with the settings on the camera (which I use for a deck in batch capturing). I found the function on the camera where you can set the "TV Type" to either 16:9 or 4:3. I switched the TV Type to 4:3 and when batching it went back to the original letterboxed look (in the batch preview screen that you see while capturing), however when put into the viewer and canvas it was too letterboxed and looked squashed vertically. So then I switched back to TV Type 16:9, now it looks 4:3 squeezed in the batch preview screen (no letterboxing, no missing pixels), however when it goes into the viewer and canvas it becomes letterboxed like the original footage that I had described earlier.
So now even though I have switched the camera back to its original settings it will not display in that 4:3 squeezed look in FCP viewer and canvas.
So after all that my main questions are, in 16:9 can I view it in the FCP viewer and canvas in its correct (anamorphically converted) aspect ratio and still export it without the black bars on all sides?
(The FCP canvas seems to only display in 4:3)
If not, what setting do I need to capture in FCP in the 4:3 squeezed look I have described earlier?
(This is the only setting that I have found that displays properly when anamorphically stretched via DVDSP)
I know that this is a long essay so thanks for making it this far. I have spent weeks experimenting trying to find the best solution so please help me if you know how! I will be very appreciative.
Thanks
Liam

Hi there,
I am not sure if it is necessarily a bug, but its a matter of understanding all of the settings needed. I had the same problems for a while but after a fair bit of trial and error have found some workable settings.
It probably has more to do with the export settings rather than what viewer options have selected (I don't think that viewer settings affect your export).
What program are you using to export?
I am using compressor to export with aspect ration set to automatic 16:9. Then use DVDSP with the track set to 16:9 letterbox, it seems to export to DVD with the correct aspect ratio that way.
I am having trouble with the image strobing, looks like some kind of interlacing problem, but at least I have got it in the right aspect ratio.
Its typical video, solve one problem and it just creates another.
I am yet to find the absolute best workflow.
In response to Andy above, the original letterboxed footage probably did have something to do with the downconverting settings on the camera, as when I import without downconverting it does not letterbox. In the HDR-HC1 there is an option in the menu called "TV Type" with options of 4:3 or 16:9. I was reviewing my footage on a 4:3 television so I most likely had it set to 4:3 which created the letterboxing in the viewer when I then imported the footage.
Importing the footage in HDV solves the issue of aspect ratio, but creates a new problem with the image strobing.
I hope this was some kind of help to you.
Liam

Changing aspect ratio in Final Cut Express 4

I am having trouble with the aspect ratio of my clips.
I imported from a camera to iMovie '08, then edited all the clips which I needed (about 10 hours of 2 minute clips). Then I bought FCE4 as I realized I wouldn't be able to do what I needed in iMovie. I imported all the video in 16:9, and have checked the project settings on all of the clips in iMovie - all are set at 16:9, then I exported them as Final Cut xml files.
I've now begun to import them into Final Cut, but they come in as 4:3. In the project properties I have them set as PAL CCIR 601, but I am not given an option to set the aspect ratio. I've tried setting it to 1.422 in the motion tab of the viewer, but it doesn't appear to do anything.
So, how can I import these files into FCE4 and preserve the 16:9 aspect ratio?

Hi
Did You try.
• After Capture
• Select a Clip in Browser
*• The Browser window can be extended to the right.*
• Now more columns will be revealed - one of them Anamorphic
• tick this for the selected clip
• NOW drop clip into TimeLine (has to be done this way)
How does it Play ?
Yours Bengt W

External Monitor Aspect Ratio Looks Wrong

I'm having trouble using my TV as another monitor with my new MacBook Pro. I don't really care whether it is mirrored or as a second monitor, but no matter what I do I can't get the aspect ratios right. I want to play videos on my TV, but when I put them fullscreen there, no matter what aspect ratio I've chosen, it ends up cropping the screen, as if instead of actually changing the aspect ratio, it has just blown up the screen from the wrong aspect ratio and let the edges get cut off. The (oldish) TV has a 1024x768 ratio, my laptop a 1280x800. They're connected by VGA cable. When I just leave them like that as separate monitors, the TV acts as if it's the same size as the computer and ends up cutting off the bottom and left side of the window. I've tried setting my laptop to 1024x768 as well as having them as separate monitors, and that changes the laptop screen, but still when I fullscreen a video it's cropped instead of resized, now on both laptop and TV. When I mirror them my laptop gets all stretched looking, presumably because it's taking on the TV's aspect ratio and then just stretching it out. It's like the only way it knows how to handle anything properly is if it's in its native 1280x800 setting. My old PC handles this without a problem (I think it ends up putting black bars top and bottom on my TV to make the ratio work for videos that aren't fullscreen, and in any case it doesn't do any of the weird cropping), and I thought Macs were for graphics people!

Hi
> Should I install the external monitor samsung driver (I do have the disc) or might it upset the Toshiba's own screen...
First of all the graphic driver is necessary and important to run and to use the graphic card with full performance and NOT the external monitor!!!
I'm sure that the external monitor software was not designed to run the graphic card but to enable and to control some external monitor options.
Anyway, you could try to install this delivered software but please understand that this software will not replace the installed Toshiba nVidia graphic driver.

Aspect ratio issues with SD box and no help from Verizon

I just renewed my 2 year contract which included a free box but a billing screwup resulted in repeated charges for the box. A CS rep credited the account and said I had the wrong box and she would send out a new one.
i had a 7100 Motorola HD box. I have an older television set (that cannot control aspect ratio) and I have never had HD service but this was the box I was sent by Verizon as part of my contract. Why they felt it had to be changed I don't know, but ..... the box they sent was a 2500 SD box which does not give me an acceptable picture.
It's totally random. Some channels are 16:9. Some are overzoomed 4:3. The FIOS channel bar at the bottom is partially off the screen and the content is clipped around the edges. Commercials are totally random in size and appearance.
The # key on the remote does not work. There is no option in Settings to change the aspect ratio.
CS was ZERO help. They concluded that I had to either deal with the scattershot image sizes and clipped image content or go buy another television. SERIOUSLY VERIZON?
I couldn't get an answer as to why the box I was sent by Verizon as part of my original contract that provided a perfectly acceptable image had to be replaced with a box that doesn't provide squat. I have had Verizon service for approximately 7 years with this same television and this is the first time I've been given a box that can't produce an acceptable image and a remote that can't resize. So why now?
This smells like a bait and switch, or an attempt to get customers to pay for an upgraded box for a service they don't want just to get an acceptable picture. I live in an urban area and there is plenty of older equipment in these homes. So are customers like myself just being told even though you pay a significant amount of money for a Triple Play you are only getting 2 parts of the service?
I find it hard to believe there isn't some way to make the box or the remote change the image size. Can anyone help?

why do so many topics go to private section? we need to see how it's responded to in case we have the same problem..
but yes, our 2500 sd box, basically the 4:3 standard non HD box broadcasts to fit a 4:3 TV.. now some channels will have the black bars on top and bottom to accommodate the 16:9 aspect ratio.. you'll notice this if you run the 2500 box on a flat screen.. if you have it in 16:9 ratio on a flat screen it looks stretched.. the only way to watch regularly is in 4:3 mode.. which basically has the image with bars on all sides.. or you can zoom it and lose a portion of the image.. but it's because the box thinks you're using a 4:3 sd tv so the boxes appear on top and bottom so it can still fit the wider image it's filmed in.. so with flat screens you need the HD box i guess.. unless there is something i'm missing but there isn't a setting that i can find to change how the box exports the image for a flat screen or 4:3. I know the HD boxes have an 'SD Override' option.. which i guess tells the box you're not using a 4:3 tv anymore.. but that option is not on the 2500 SD box.. believe me i looked.. but this is all in reverse for your issue anyhow as you're having trouble with the SD box on an SD TV... which yeah, if you run SD the quality of picture is not as good as the HD programming.. so please let us know what they say to do for you.

ASPECT RATIO Elements 11

Is it possible that I LOST my aspect ratio option in tool options when cropping a photo for the website??? It is gone and I am sure it was there before. Using photo ratio, customer or other is no good for what I am doing. Please help someone.

Aspect Ratio does not appear in PSE11 Crop Tool.
This is the standard Tool Panel (you can enter your own dimensions in W & H):
And these are the standard drop downs:
File> New> Blank File allows you to create empty documents with various Film/Video aspect ratios.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Aspect Ratio - Anamorphicizer

i have troubles with burning my fcp (version 6.0.6) project.
my workflow is this: i make my movie in fcp, export it as a quicktime reference movie, drag it onto anamorphicizer, import it into idvd and save as image file. worked perfectly well a hundred times.
since i updated on snow leopard it is not possible to use anamorphicizer, i get error messages. it is also not possible to play the reference movie in quicktime with the correct aspect ratio - in qt 7 there was the possibility in the "window-menu - command-j - adjust blend - clear" to correct this (sorry for explaining quite complicate, my english, you know ...).
anyone an idea what i could do to correct the aspect ratio so that idvd can handle the project correct? switching to dvd studio may be fine, but it will take me a few weeks to learn and i need the project on dvd soon ...
thanks in advance
wolfgang

I'd say just use Quicktime to change your display ratio instead of Anamorphicizer. I use NTSC DV Anamorphic, so if you're using another format you'll have to calculate your own numbers. Open your exported video in QT.
In Quicktime 7.x pick Window -> Show Movie Properties from the menu bar. go to the video track. Go to the Visual Settings tab. Uncheck the "Preserve Aspect Ratio" box. Change the first box in the Scaled Size field to the correct width for your anamorphic video. If you're using NTSC DV this is 853. Press enter and your video size should change. Recheck the box, press save, and you're done. iDVD will see this.
If you're not using NTSC DV you are using a 16x9 ratio, so divide your Y number by 9, then multiply that by 16 to get your X number. Sample calculation with a 720x480 is something like this.
480/9=53.3333
53.3333x16=853.3333 so use 853 for your stretched X value.
Hope this solves your problem. It's a really easy fix after you do it a few times, and it beats having to use another program.

Please watch and see if you can tell me how to correct the aspect ratio

http://www.youtube.com/watch?v=shiFprOnbK4
This is an unfinished std. def video hence this issue I ran into which is just a fun video for my youth group kids I teach at my church. I am editing it in final cut pro 7 and if you see at about 35 seconds the aspect ratio changes whatever its doing with the picture there.
I have never ran into this problem before so I don't know if its something I may have selected on the camera accidentally or done wrong in FCP but I shot all the video the same day of course for this event of ours and all the other video is fine an in 16:9 or what was called the "letterbox" option on my Panasonic DVX100B.
Please help me correct it if you know how. Thank you very much in advance.

I can't watch the video as well. Not quite sure what trouble your having
Aspect ratios can be tricky and there are a few spots you can mess them up. First I would check to make sure that your sequence settings are the same aspect ratio as your original footage. I would also make sure your exporting with the correct aspect ratio as well. (If you’re using the quicktime conversion option. Sometimes depending on your settings options like 16:9 are not turned on by default and you need to check them before exporting.)
Also if you can change the aspect ratio in FCP regardless of your sequence's aspect ratio is. Under your distort tab there is a aspect ratio option. +33 will make your footage 4:3 and -33 will make your footage anamorphic. However this will only stretch your footage. This method is only useful for when you can to place 4:3 footage into a 16:9 sequence without it appearing distorted and stretched

FCP project not the correct aspect ratio when exporting to Quicktime

Hello All;
I am trying to export a FCP project in its native resolution (1440 X 1080) to Quicktime but everytime I try, the aspect ratio is messed up and people look taller and thinner than they should.
The project is a resolution of 1440 X 1080 as determined by examining the sequence settings in FCP.
I configure quicktime (see below) to a resolution of 1440 X 1080.
So why isn't my Quicktime video the correct resolution when I play it with the IMac's Quicktime player ? I shrink the player to 1/2 size to fit it all on the screen.
My exact settings are below ...
Export - Using Quicktime Conversion
Format - Quicktime Movie
Video Settings - Compressor - MPEG-4
Quality - Best
Not sure if I changed the framerate - if I did, I probably changed it to 29.97
I didn't touch the other settings in the video settings - left them to default
I didn't change the filter settings - I left them at default
Size - 1440 X 1080 (The actual resolution of my source video)
I checked the box - preserve aspect ratio using letterbox (If applicable)
Other settings were left at default
Sound Settings - Format - AAC
Rate - 48 KHZ
Render Settings - Quality - Best
Target Bitrate - 128 KHZ (This was left at default - I did not change it)
Prepare for Internet Streaming - Fast Start checked (This was default - I did not change it)
All other settings not specifically mentioned were left at default.
Thanks. Tim

I don't have much of an answer for you, but to test try not checking the preserve aspect ratio. Rather than reexport the entire 1 hour just export 10 seconds so that you can trouble shoot different things.
Hope that helps a bit,
Eric

Letterboxes, Stretching, and Aspect Ratio...

So heres my problem...
I'm filming on a Sony HD camera (in DV because I dont have the hard drive space for HD right now or the processing power sigh) in 16:9 aspect ratio.
I import it into FCP through iMovie because I can just tell it to capture everything easily and walk away while it does its thing.
Now, when I open a clip from a bin its cropped at a 16:9 ratio (thats good... no letterboxes or anything, just the footage like that). Thats what I want. However, I can't get it to show like that in the viewer. It always has letterboxes, and its stretched when I don't choose Use Square Pixels.
When I convert to a QT movie, its still stretched lengthwise.
I'm assuming I'm doing something terribly wrong here, but not being completely versed in FCP (yet) I'm having trouble fiddling around trying to get this to work. Do you have any ideas?
(o yeah, I have it set on DV-NTSC Anamorphic... which I assume is what I want...)
Thanks for anyhelp you can offer

All right,... my embarassment level is pretty high right, now... having posted three times as of now .... but my problem wasn't as resolved as I thought it was.
I got rid of the letterboxes (yay) but I still have to deal with the pixels. Its fine in the canvas and the viewer when I click Square Pixels, but when they are off or when I convert to quicktime, they turn off and its stretched tall into a 3:2 ratio
Ideally, I'd like a 16:9 ratio for the quicktime movie.
Do you have any ideas (again)?

Changing aspect ratio for edited clips

Hi,
There probably isn't a way to do this, but I thought I'd ask. One of my students made a film using a JVC camera and two other SD cameras. The JVC was in 16X9 aspect (he didn't notice) and the other cameras were in 4X3. We had trouble getting the video off the JVC camera and then getting it into the right aspect ratio, as its files came out as 4X3, looking a little squished needless to say. He completed his project using those clips. I have finally figured out a way to get the JVC clips back into 16X9. Is there a way that I can replace the clips he used in his video with clips in the correct aspect ratio without losing his editing?
Thanks,
Mike

I suppose in theory this is possible since iMovie is non-linear and non-destructive, and the edits are actually instructions that tell iMovie what to do with each clip. You'd need to modify those editing instructions to refer to the new clips... but I have no idea whether this is really doable.
John

Aspect Ratio Trouble

Similar Messages

Maybe you are looking for