Aspire 6920 crashes after booting correctly - screeen zig zags and freezes - any ideas to help plse?

My aspire 6920 crashes after booting correctly - screen zig zags and freezes - any ideas to help plse? This does not happen in safemode which I am working in now - I have seen a list of dowloadable drivers on the acer site but not at all sure if I should download any. If laptop is really on its way out I will have to let it go - but I would appreciate any advice to extent its life,  Thanks

Many thanks - relieved that it can be done but I am very unconfident that I can do this - is the display driver the display adapter in Vista? Not at all sure how to install new driver from Acer site - Could I use 'Drivers for free' download - I tried to set up an account with them after seeing their free download on CINET but not able to from 'safe mode' and laptop crashes when I try to do anything ( after about a minute ) in ordinary mode.  Any further advice welcome, thanks

Similar Messages

  • My iphone 5c crashed after updating to IOS 8.02 and now i don't have anything from the last 3 months. What do I do?

    My iphone 5c crashed after updating to IOS 8.02 and now i don't have anything from the last 3 months. What do I do?

    Don't worry about that. iPhone stuck in recovery mode always happens when you update the iOS on your iPhone. There are two ways to solve it.
    First is is to put your iPhone in DFU mode.
    Step 1. Turn off iPhone
    Step 2. Hold down the Power and Home button.
    Step 3. When you see the Apple logo, release the power button but continue holding the Home button down.
    Step 4. Open iTunes and wait for it to tell you that it’s in restore mode.
    If DFU mode can't solve the problem, I'm afraid the only solution is to try some 3rd party software, like iPhone data recovery or something like that. You may simply try the tutorial here: How to Fix iPhone that is Stuck in Recovery Mode.

  • After cleaning my mac it opens and shuts down again please help!!!

    after cleaning my mac it opens and shuts down again please help!!!

    I opened the cover (there where the battery is) and I cleaned the dust gently with a dry napkin ...remove the battery and placed it again ...closed the cover and when i turn on my macbook bro now it shows the Apple logo and after some seconds it just shuts down (i have OSX 10.9 Mavericks)....
    I tried to boot in safe mode, also tried to repair it and even re-install Mavericks and so on, but I could not fix it. I did a hardware test and the no problems occurred.

  • Bridge CC keeps crashing on start up but was working last week - Any Ideas how to get it back. Have tried uninstalling and re installing software. All other CC software working fine (Mac)

    Bridge CC keeps crashing on start up but was working last week - Any Ideas how to get it back. Have tried uninstalling and re installing software. All other CC software working fine (Mac)

    Also some problems since the CC2014... For me i can launch bridge but the crash occurs when i try to change access to any bridge preference... i open a discussion about it

  • HT201263 my ipad 2 3G crashed while playing an HD movie on iOS 7.1, then it enter into rcovery mode, i tried itunes restore and it fails showing unknown error (27), i retried for about 100 times with no benefit.... any ideas or help please

    my ipad 2 3G crashed while playing an HD movie on iOS 7.1, then it enter into recovery mode, i tried itunes restore and it fails showing unknown error (27), i retried for about 100 times with no benefit.... any ideas or help please???

    By the way, i am using Windows 7 x64 and updated itunes

  • Since downloading Mavericks nearly everytime I attempt to print it crashes the program I want to print from.  Any ideas how to fix?

    Since downloading Mavericks nearly everytime I attempt to print it crashes the program I want to print from.  Any ideas how to fix?

    Thank you very much!  Worked!  Appreciate the help.

  • Hey guys on my mac book pro after updating three apps wont leave my dock, when i close them they just re-appear they are "LoginServer", "USBServer" and "NetServer" any ideas to what is the issue?????? PLEASE HELP.

    Hey guys on my mac book pro after updating three apps wont leave my dock, when i close them they just re-appear they are "LoginServer", "USBServer" and "NetServer" any ideas to what is the issue?????? PLEASE HELP.

    Hi I have just got back from the apple store and the guy at the Genius bar looked at it and said it was a manufacturing fault, and because it has been like it since new, and seemed to be getting worse he replaced the computer  and I have a new warranty from today.
    We got the feeling as soon as he looked at it that he has seen this before, I did say to him I was concerned it would be a replacement screen and I was not really happy about that as it was so new, and he said that was the normal procedure, but as the fault was already there at new and it was getting worse they would replace. I could not have asked for a better service.
    Not unpacked this one yet but am hoping all is good, its a great little machine.
    Thank you for your responses, and I hope this might help someone else.  One thing it did not seem to be missing pixels but something to do with the screen production?

  • I replaced the screen on my late 2007 laptop, now it won't boot. It Bongs and the wheel turns and then it turns off. I have tried a tech tool pro 3 disk, no results tried the osX tiger disk no results but bong and wheel. any ideas?

    I replaced the screen on my late 2007 laptop, now it won't boot. It Bongs and the wheel turns and then it turns off. I have tried a tech tool pro 3 disk, no results tried the osX tiger disk no results but bong and wheel. any ideas?
    I have not tried disk warrior yet,but will. I had it stored until I could get screen, battery is dead, and to be honest I forgot which OS I have in it, If I can Get screen up maybe I can get my info.
    sbckr

    Hi there sbckr,
    You may find the troubleshooting steps in the article below helpful.
    Troubleshooting: My computer won't turn on
    http://support.apple.com/kb/ts1367
    -Griff W. 

  • Mac Pro + X1900 XT crashing after boot (Leopard) - please read...

    I have a Mac Pro quad 3GHz w/ ATI X1900 XT videocard. It's one of the first models released.
    For the past 4-5 months I've noticed a few pixels on in random places - looks like stuck pixels on an LCD, but they're not as they move around from time to time and sometimes aren't there at all. It progressed to horizontal lines across the screen in places - following window boundaries, etc.
    A few weeks ago I de-dusted the X1900 (there was much), applied latest Mac Pro firmware update and applied that recent X1900 XT firmware update. All in the same hour. The dots went nearly totally away, but the lines did not.
    In the past 4-5 days, my Mac Pro basically freezes up within five minutes of boot. Can be running different apps. UT2K4 or just activating Expose or doing nothing. Right now it's still up amazingly after 30 mins.
    I've got some screenshots and I found some crash log entries that correspond. Please have a look:
    http://www.blakespot.com/macproleopardcrash/
    I also took a 10 min HD video of the crashing I will put on a DVD and take to the Genius Bar to show the problem, if I need to send in hardware to Apple for repair.
    I would love to think it's the X1900 and it overheated or something and became damaged so that would be all I need to send in. Note that NONE of these problems were at all present in the first 6 months of life or so. And yes, the crashing is post-Leopard install.
    Very troubling. Is anyone else having issues like this? Any input appreciated.
    Thanks much.
    blakespot

    I have had nothing but trouble with ATI cards on all of my macs, I really wish Apple would drop the ATI card altogether and replace it with an nvidia 8800gtx,
    its the only thing still stopping me from buying a mac pro,
    the nvidia cards are either 256mb £99 or £1,000 quadro (old technology and overpriced), they need a card in the middle ground that's not an ATI

  • Macbook pro won't boot, or crashes after boot

    My 2009 Macbook Pro running OS X 10.5 either has difficulty starting up, or after start up, it crashes. However, it seems to only crash when attempting to stream video from any web browser I've tried using (Firefox & Safari, (Chrome not supported by 10.5)).
    When the computer starts up successfully, all seems ok until I try streaming video, usually from YouTube or similar. Then after about 2 minutes of it playing the video, the screen will freeze, audio will continue, and then the screen flashes wildly like a strobe light, or sometimes a checkered/plaid-like pattern appears on the screen in weird reds and blues.
    When the computer does not boot at all, it will either appear to be booting, then freeze on the blue screen. Or as soon as I power up, I'll get the grey screen but it will have the checkered/plaid-like pattern on it, and it will stay there forever until I hold the power to turn it off.
    Most of the time booting in safe mode will be successful, and from there I will run Disk Utility, my hard drive appears OK, but I have to repair disk permissions a few times before it says everything is OK. Sometimes attempting to boot in safe mode is not successful, so I will boot in Single User mode and run fsck -fy code until I get the "OK" message.
    I'm out of ideas, and the problem doesn't seem to be going away. Do I need to erase the disk and reinstall OS X or  update to a newer version of OS X?
    Thanks in advance for any help.

    Sounds a bit like a heat issue.
    Have you blown the dust out lately?
    Get Temperature Monitor to see if it's heat related...
    http://www.bresink.com/osx/TemperatureMonitor.html
    Sadly, it also sounds like this, which doesn't cover the 2009 MBP...
    http://xlr8yourmac.com/archives/feb15/021915.html#MBPvideoRepairProgram
    Open console in Applications>Utilities, check the system log for the date/time of the last crash  & the Startup right after that for clues.
    Click on the top line we want, Shift plus click on the bottom line we want, CMD+c to copy, then paste the text in a reply with CMD+v
    A few dozen lines should be about right, hundreds or thousands won't likely be readable.

  • My Facebook is continue crashing after 5 seconds. On Ipad and iPhone. Who has got a answer??

    My Facebookapp is continue crashing after 5 seconds on Ipad en iPhone

    Don't use it. The app has been a buggy mess for months. I access facebook via safari.
    Or look for a third party app that works.
    THe burden is on facebook to make an app that works, not on Apple to fix facebook's issues.

  • Updated my iphone 4s to 8 and has now crashed i have lost everything and wont boot up just shows the apple logo any ideas??

    ANY IDEAS WHAT I CAN DO

    Mike19981 wrote:
    I just updated my phone today to ios 7 a iphone 4s once it turned on it wouldnt boot past the apple logo
    Perform a Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    If no joy...
    1)  Connect to iTunes on the computer you usually Sync with and Restore
    http://support.apple.com/kb/HT1414
    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download
    2)  If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808
    Note on Recovery Mode.
    You may need to try this More than Once... Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • My 2yo MacBookPro comes on but the screen is black and blank. After about 30 seconds it powers down. Any ideas?

    my MacBookPro comes on but the screen atys black and blank. After about 30 seconds, it shuts down. Itx less than 2 years old and has very few hours of use.
    anyone one have any ideas?
    katherine

    If you have attempted the reset, which is holding the home button and sleep/wake button, was it still connected to the computer? Have you tried to do that when not connected. You stated it never came on, how long did you hold the buttons together? If you cannot get it to connect to iTunes then you would not be able to restore the device. You can see if you can put the device into Recovery Mode by following the instructions in this support document. If that does not work, then you are correct, make an appointment at the Apple Store. If you can't update or restore your iOS device

  • TS2529 I recently got a new iphone and some of my apps don't work anymore. When I try to open them they either crash immediately or my phone asks for my iTunes Store password and then the app crashes. Any ideas? Help!

    I've tried to uninstall and reinstall the app but nothing happens. When I try to open the app, it either crashes immediately or asks me for my iTunes password and the the app does nothing or crashes. Has anyone else had this problem? Any suggestions? Also, it seems that my phone asks me for my iTunes password randomly, when I'm not trying to open apps.
    The app that I have the most problem with is the Simpsons game. I've tried to contact EA as well as apple and gotten nowhere.
    Please help if you have knowledge of what to do
    Thanks!

    If you get an error that says can't backup, try moving the existing backup file to a safe location and thry again. again. You can find the location of the backup file here:
    iPhone and iPod touch: About backups

  • HT1926 I've successfully updated itunes and quicktime on windows XP but itunes won't run properly, the video tutorial loses audio after about 1-2 minutes and when I plug in my iphone 4s to sync the whole thing freezes, any ideas?

    Hi everyone,
    was prompted to upgrade itunes on my PC and also upgrade the software on my iphone 4s.Went through as usual but took 3 goes to get a successful upgrade of itunes on the PC. Then was prompted to update quick time, this was done successfully.
    Thought I'd look at the tutorial video for itunes - the sound went off 11/2 minutes into it, then I couldn't stop it. I had a quick look around itunes and decided to sync my phone. The program recognised the phone then everything froze. Windows message for a non responding program came up and had to pull out of the program. So far after several hours I have not been able to get beyond stage 2 of 7 of syncing the phone; it keeps freezing up at different stages.
    Any ideas?? I haven't had this kind of trouble before with any other version of itunes.
    Cheers

    Still nothing? Wow... maybe the quality of this discussion board really has gone down. Dissappointed.

Maybe you are looking for

  • Sharepoint throw a javascript error while adding items to sharepoint list

    sharepoint throw javascript error when adding item to list error called:  this._registeredValidators[validatorIdx].Validate is not a function any help please

  • Error when deploying an ear file on the weblogic 6.0 admin server

    ####<Feb 6, 2001 8:48:27 AM EST> <Error> <Management> <wSDWAPW95A452> <petstoreServer> <Application Manager Thread> <> <> <141004> <IOException opening application petstore:Name=s3,Type=Application, loading from path C:\bea\wlserver6.0\config\petstor

  • Image quality in PDF files

    Hi. I add images to pdf files all the time and I have a question about them. The image quality seems to be bad in certain situations. For example I added a 501x483 72dpi gif image to a 1190x1684 pdf file. It looks great at 75% zoom but really jagged

  • Cluster and Read Write XML

    In my applications I allow users to save their settings. I used to do this in a Ini file. So I wrote a Vi that could write any cluster and it worked ok. When I discovered that in the newer versions of LabVIEW you could Read/Write From/To xml, I chang

  • ODI Supports ELT technology..How it is best when compared to ETL?

    In any Convensional ETL tool we are able to perform complex logics very easyly by using the componets inside the tool. I have not found any such components or transformations in ODI. But when I am reading the documents it says that ODI supports compl