Aspire E1-522 sound stopped playing through the speakers?

Hi All, I have an Aspire E1-522 laptop, refurbished. yesterday the sounds from the speakers just stopeed. i can play sounds through the headphone jack just not the built in speakers them selves. I have factory reset and updated any drivers but not luck so far. Any tips or advice would be great. I use it for when im in hopital, it also has no warranty left so im stuck their. Please help me

Since you already did a factory reset, i think it's an hardware issue instead of software.the only solution is to go to a computer shop and have a check about this issue.

Similar Messages

  • My 3gs has stopped playing through the speakers and when the headphones are plugged in only plays through one ear? it still ring when called and everything else seems fine, whats the problem? it seems like the phone thinks the earphones are always in?

    my 3gs has stopped playing music through the speakers, they play with headphones but only through one ear. It seems the phone thinks the headphones are in all the time. The ringer still works when called and i have cleaned the headphone socket the best i can without damaging the phone! Any ideas?

    I had the same issue, 4s running ios8, but the plugging and unplugging the headphones did not work, BUT, when I tried plugging and unplugging from the DOCK, it started to work again. There must have been a short in the power plug, not the headphones. I also blew out the bottom power plug with computer safe airjet. Hope this one helps anyone else having the issue.

  • HT204370 how do i get the movie sound to play through the TV speakers, It is connected to my mac bookpro but the sound only comes through my macbook pro

    how do i get the movie sound to play through the TV speakers when watching a movie from Itunes, It is connected to my macbook pro but the sound only comes through my macbook pro.
    Thanks

    Transfer the movie from your iPad to your MacBook then. =)
    iOS: How to transfer or sync content to your computer
    http://support.apple.com/kb/HT1296

  • When I connect my iphone to a Bluetooth system, the music doesn't play through the speakers?

    When I connect my iPhone to a bluetooh system, the music doesn't play through the speakers?

    Hi there JAMESPARKER1999,
    I would recommend taking a look at the bluetooth troubleshooting steps found in the article below. 
    iOS: Troubleshooting Bluetooth connections
    -Griff W.

  • I recently updated to iOS 7 and since then, my music sound stops playing in the midst of a song. How do I fix it?

    It just stops playing whether I connect my earphones or sync it into my car Bluetooth. Help??

    Hi mzjulee,
    Thanks for visiting Apple Support Communities.
    If your bluetooth connection isn't working intermittently, the steps in this article can help:
    iOS: How to troubleshoot Bluetooth connections
    http://support.apple.com/kb/TS4562
    All the best,
    Jeremy

  • Sound not playing through internal speakers or headphones

    Okay, so I am wanting to listen to audio, but it is not working through my speakers or headphones. Last time that this happened, I know that it had something to do with airplay, since I remember doing something with airplay. I have no idea what is causing this this time, but if you need any additional details, just ask.

    Have you tried a PRAM reset?
    http://support.apple.com/kb/ht1379
    Ciao.

  • Sounds stop playing when user locks screen on iOS with AIR 3.9 Beta

    We built a simple application that should play sounds when in background and when the screen is locked.
    Since we updated to the latest AIR 3.9 Beta SDK, all sounds stop playing when the user locks the screen on iOS.
    The sounds resume when the screen is unlocked.
    - it works on Android
    - we use renderMode : cpu
    - we use UIBackgroundModes : audio
    - we use NativeApplication.nativeApplication.systemIdleMode=SystemIdleMode.KEEP_AWAKE;
    - sounds play when the app is in background
    - was working great with AIR 3.8 SDK
    Any help would be greatly appreciated.
    Thanks!

    Thanks for reproting the issue, we have an internal already logged bug for this, which is under investigation at the moment.
    -Nimit

  • Getting sound to play through computer during import/selecting to import

    HI,
    Complete newbie question as I've never done video before...
    I plug the camera (Sony DCR- HC48) through Firewire into iMovie '08.
    The camera is recognised, the import window opens and I can play the video, choose the bit I want and import it as a clip - cool! No problems there.
    The problem is, when I am selecting the video to import the sound plays through the camera and not through the Mac. Ideally I'd like it to play sound through the Mac so I can use headphones while I select video to import. So my question is...
    Is there no way to get the sound to play through the Mac as I am selecting the video to import?
    Thanks for any help.
    Pat

    So what would be the "standard" way of working? Would you import the whole DV tape onto the hard drive and then cut it down to size on there or bring in bits from the camera and use the camera's audio to select the chunks you want?

  • ITunes 12.1 won't play through bluetooth speakers

    Ever since the latest iTunes update (12.1.0.71 64 bit), my music from iTunes won’t play through my bluetooth speaker connected to my laptop. Every other sound the computer makes plays through the speakers while iTunes plays through the laptop’s built in speakers.The speakers are also set as the default audio device for the computer. There aren’t any options in the iTunes preferences that would allow me to choose an audio device to play music through.
    **My iTunes is operating on a Windows laptop and the bluetooth speakers are JBL if this helps, but everything was working fine until this new update**

    There is an alternative version for 64-bit editions of Windows here:
    iTunes 12.1 for Windows (64-bit — for older video cards)
    that seems to address the most of the playback issues that some users have been reporting with the full 64-bit version of 12.1.0.77 - including problems with Bluetooth speakers where either sound is degraded or completely absent.  The alternative installer here is the same architecture as most previous "64-bit" versions of iTunes, i.e., a 32-bit application with a 64-bit installer.  The "for older video cards" label appears to be something of a misnomer as some people have reported that this corrects problems found on current / high-spec systems.
    Some users have reported that after installing this alternative version it is necessary to adjust the "Play audio using" selection (normally to "Direct Sound" rather than "Windows Audio Session", though this may vary based on your audio hardware/drivers) in Edit > Preferences > Playback to restore glitch-free audio - one part of the reported symptoms is that the "Direct Sound" choice isn't available, usually in Windows 8.  It may also be necessary to ensure that your Bluetooth speakers are active and selected as the default audio device before you run iTunes.
    If this doesn't address the issue, you may want to think about reverting to iTunes 12.0 - see Turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for steps needed to completely remove all installed iTunes components, and for links to the 12.0 installers.

  • ITunes ONLY plays through internal speakers, system plays through line out

    I have my system setup to play through my stereo. I launched iTunes today and it gave me the "accept terms & conditions" as if I had just downloaded a new upgrade (I didn't - have been running 7.4.2 perfectly since Sep 10 2007). I agreed, iTunes starts up ok with library intact. BUT; When I press play, the sound started playing through my skype phone! I plug out the skype phone and it plays through the internal speakers.
    I checked sys prefs and it's ticked for line out, and, surely, when I press the volume button it adjusts through the stereo speakers (as does everything else except iTunes now).
    I tried playing with the skype phone settings but they were all fine.
    Does anyone know what's happening here?
    edit: strange - I quit iTunes and it asks me "keep new settings or old settings". I keep old, restart iTunes and it plays through the speakers again. There are no settings in iTunes to change output as far as I can see. I thought I'd leave this post in case anyone else comes across this. odd, but sorted ?

    sorted itself on restart

  • My ipod touch has stopped playing through my Sony docking station, It only plays through i pod. It's not the docking station as my daughter's ipod works fine on it. It can synch when connected to computer. Any ideas what is wrong?

    My ipod touch has stopped playing through my Sony docking station, It only plays through the i pod. It's not the docking station as my daughter's ipod works fine on it. It can synch when connected to computer. Any ideas what is wrong?

    Have  discovered that I had not in fact updated the ios!!
    Went through the process last night and my ipod now works fine on my docking station.
    Thank you very much for your advice.

  • When my iPhone is connected (via the Lightning cable) to the usb port in my car, the alert tones are no longer played through the car speaker or the phone.  This previously worked, but has randomly stopped working, help!

    When my iPhone is connected (via the Lightning cable) to the usb port in my car, the alert tones are no longer played through the car speaker or the phone.  This previously worked, but has randomly stopped working. help!

    I took my iPhone to the Service center of M/s RSG INFOTECH PRIVATE LIMITED on April 17, 2014.
    Why are you posting in this forum about what occured with an independent service provider?  How is is at all relevant to Apple??  In fact, service by any person or business not authorized by Apple voids any waranty.

  • I need to play a song on a Keynote presentation, how do I do this ? I use to drag and drop the mp3 in Keynote but it stops playing when the slide move to the other one... how can I make the song keep playing through the whole presentation ? Thanks.

    I need to play a song in a row in a Keynote presentation, how do I do this ? I use to drag and drop the mp3 in Keynote but it stops playing when the slide move to the other one... how can I make the song keep playing through out the presentation ?
    Thanks.

    Drag the file into the audio window in the Document inspector...

  • My itunes loses the sound when playing through TV/receiver

    My itunes loses the sound when playing through TV/receiver.  It is my 2nd Apple TV,  I have a Mac and PC and I have used 2 different receivers.  Any help?  If I start the music through Apple TV is doesnt skip but then I cant have it playing through computer at the same time.  It amazes me how these littles things arent fixed yet.

    I have almost the exact same problem, except that mine is without the iTouch. My itunes is working perfectly - uploading music from CD's, searching for music, syncing with my iPod classic. However when i ask it to play any music it will say that it is playing yet not only will no sound come out but the timer bar will not move either. it is the same with music in the itunes store and happens regardless of what else is happening on my laptop.
    i know my sound works fine with all other programs, and i read on another forum that 'repairing' itunes through the control panel fixes it, however this is not the case.
    Any suggestions would be greatly appreciated.

  • My Mac suddenly stopped playing through my external speakers which are fine and working well with other devices.

    My Mac suddenly stopped playing through my external speakers which are fine and working well with other devices.

    Have a look in System Preferences -> Sound -> Output.
    Plug the speakers out. Do you now see "Internal Speaker" as the name from the Built-in device? If you replug your speakers, is it now changing to "Headphone?

Maybe you are looking for

  • Connecting problem when printing on HP 8600 Printer

    Everything looks good connection wise until I send a file to be printed.  The printer is ready but then system says trying to connect, will try again in 30 seconds.  The curious part is I can use the device as a scanner with no problems, but the prin

  • Header and footer are missing

    hello header and footer are missing when printing, it has been there before but suddenly they are missing. I have windows 7 and printer is Canon MG6100 series.

  • How to invke the XSQL Servlet directly

    What I am really trying to achieve is the ability to forward an xml document to the XSQL servlet for further processing. How can I invoke the servlet rather than go via an xsql page and what parameters do I need to pass in order for it to work. I'm w

  • Time Machine will not back up after updating from 10.2 to 10.3

    This just started yesterday so it has to be due to the update. The following error message is given in the Time Machine settings: The backup disk needs 257.55 GB for the backup but only 234.84 GB are available. Select a larger backup disk or make the

  • Investment order settlement rule Errror

    Dear All, While creating an Investment order, system will ask for creation of AUC asset if investment profile in assigned to the Order and creates an AUC asset with autoomatic generation of settlement rule. But when i m trying to create the said orde