Aspire E17 not detecting wifi networks

There can be several reasons why you are not able to connect to wireless network. To troubleshoot the issue, you are advised to follow the steps mentioned on the links below and check if that works:
http://windows.microsoft.com/en-us/windows/cant-find-wireless-network#1TC=windows-8
http://windows.microsoft.com/en-us/windows/network-connection-problem-help#network-problems=windows-xp&v1h=win81tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1 Hope this will help you.

I had to go to the device manager and then update the driver for my wireless lan.  Hope this helps!

Similar Messages

  • Iphone 6 not detecting wifi networks

    my iPhone 6 is not detecting wifi network, i already switched off and on.
    thanks

    cheeku2000 wrote:
    my iPhone 6 is not detecting wifi network, i already switched off and on.
    thanks
    Switched what off and on, Wi-Fi in Settings, the iPhone, the router? See this support document about troubleshooting Wi-Fi connections. If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support

  • IPad2 not detecting wifi networks

    my 3 month old ipad2 has stopped detecting any wifi network. It just happened all of a sudden, the device has iOS5.1. the internet worked fine till one dy when the battery dropped to 4%, i charged the next day and no internet since then.
    I have tried resetting it, turned it on-off, erased all settings and then tried.
    in the wifi options page, it just keeps on *detecting* networks, it doesnt't even say no network found or anything now.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
     Cheers, Tom

  • Iphone 4s ,version 7.0.4 not detecting wifi

    my iphone 4s is not detecting wifi network and i tried by reseting the network settings....but  it doesn't work...
    please suggest me any other option...

    Erase all contents and settings does not reinstall iOS.
    If whatever the problem is applies to every wi-fi network the iPhone has access to, if no change after restoring the iPhone with iTunes as a new iPhone or not from the backup, the iPhone has a hardware problem.

  • MacBook Pro Retina stopped detecting wifi network in one location.

    Hey everyone, experiencing kind of a weird problem and was hoping someone would be able to help.   I was doing some studying at a Starbucks, connected to their WiFi network when randomly my computer lost connection to their network and was no longer able to detect that it even exists. I was worried this was some sort of problem with my wifi card as it could no longer detect any networks nearby, where as before it was detecting multiple networks in the area of the Starbucks. Oddly i was still able to connect to the network on both my iPad 2 and iPhone 4S. Upon returning home I was relieved to find that I was still able to connect to my home wifi network. Since then i've been to many locations with my laptop but not once had an issue connecting to or detecting wifi networks, with the exception being at that Starbucks location. I've returned many times hoping that the problem would somehow fix itself, and that maybe it was just a problem with their network, but that doesn't seem to be the case. It seems to be that for whatever reason something happened to the MacBook pro while I was at that Starbucks location that has caused it to no longer detect the wifi networks there, and only there.  One possibility could be the I updated Mountain Lion to the 10.8.2 supplemental update while there, but I don't see how that would cause the problem. If anyone has any ideas as to a solution that would be greatly appreciated.
    Thanks in advance!

    I considered the network hog point, but I don't believe that I was using any excessive amounts of bandwidth. Also, because I can no longer detect any networks at the Starbucks location (not just the Starbucks network) I don't believe that this is the problem. Also, when I updated the operating system I was sure to disconnect from wifi first, I had already downloaded the update on my home network, just had yet to restart to install it, so my security shouldn't have been an issue either.  How exactly can I go about masking my MAC address so I could double check to see if it was the network issue?
    Oh, also, I booted into Windows 7 via boot camp and for some reason Windows is also unable to detect any networks while at Starbucks as well, which is even more confusing.  I don't know if it's worth mentioning, but I bought this MacBook pro retina in Canada and am now in There UK for school. I've heard that north American macs don't play well with one of the network channels that is commonly used over here, so that also may play a role in all of this. But considering that I was able to consistently use their wifi for a couple weeks with no issue, I don't see how that could be the problem. As far as WEP encrypted goes, the network is unsecured so I don't believe that's the problem.
    Thanks for the response, I appreciably appreciate it!

  • My iphone 4s had upgrade to ios 8.1.1 and wifi can turn on but can not detect wifi. how to downgrade ios org back in to ios 6 again?

    my iphone 4s has upgrade to ios 8.1.1 and wifi can turn on but can not detect wifi. how to downgrade ios or back in to ios 6 again? i have try to restore iphone , reset all but it can't solve my problem. any one can help me?

    You can't downgrade the iOS level.
    Try using Settings > General > Reset > Reset Network Settings.

  • Iphone is not detecting wifi

    i have tried restoring many times but still when i switch on wifi it works fine for sometime and immediatly it starts to connect and disconnect and later i see the wheel spinning  continously near wifi toggle and doesnt not detect any network and sometimes when i do hard reset wifi toggle greys out so if there is any fix please help !!!!!!!!!!

    I also have the same issue. 4S. No respite since the time I upgarded to 6.1.1 and even after 6.1.2 no change in wifi status. Support article http://support.apple.com/kb/TS1559 does not help at all. Hoping and waiting for a resolution by apple. This has to be a software glitch in th ios.
    Anand

  • Could not join "wifi network name".  A connection timeout occurred.

    Mac Pro running 10.7.5.
    Whenever the computes wakes from sleep or logs in, it no longer automatically connects to my wifi network.  When I manually select the network for from the Wi-Fi status in the menu bar, I get the following message:  Could not join "wifi network name".  A connection timeout occurred.
    Even though I get that message the machine joins the network with no other problems.  I am led to believe that is is on the Mac Pro as my Macbook and iPad/iPhone join the network with no issues. 
    I have tried deleting and restoring the preferred network, and remember networks is checked.  I have also restored my airport express base station.
    Any suggestions?

    Hello,
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.5, 10.6, 10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    If using Wifi/Airport...
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.

  • TS1398 my phone does not detect wifi at all

    my phone does not detect wifi at all. what should i do? i did everything from turning it off to resetting my phone.

    try a hard reset and charging it. then get it replaced through apple

  • Problem to detect Wifi networks. I restored without back up and it doesn't work. suggestions?

    Problem to detect Wifi networks. I restored without back up and it doesn't work. suggestions?

    I detected one time networks with the trick (air plane mode on, power off, sim card out, power on, sim card in, air plane mode off...). since nothing. I think it's a software problem. suggestions ?

  • My iphone 3g is not detecting wifi it is having ios 4.2.1

    my iphone 3g is not detecting wifi it is having ios 4.2.1 how to solve this problem

    Not sure what you question is, but the 3G cannot be updated beyond iOS 4.2.1.  The 3GS can be updated to the current version (iOS 6.0.1).

  • TS1398 my iphone 4 does not see wifi network, wifes iphone 4, right beside my phone, sees networks. what to do??

    iphone 4 does not see wifi networks even though wifes phone right beside mine does
    what to do

    http://support.apple.com/kb/TS1398

  • Windows did not detect any networking hardware, Windows 7, New Hard Drive

    Message "Windows did not detect any networking hardware"
    Satellite P505 S8980 Windows 7 Home Premium.
    I replaced the Toshiba 500 GB HD with 500 GB Seagate.
    Device Manager icon for any device with yellow exclamation mark,
    Click on "Update Driver".  Lan eNet details as follows:
    Antheo - R8132 PCI-E Fast Ethernet Controller (NDIS 6.20)
    Browse to the folder where the setup program has the driver...
    Message: "The best driver software is already installed."
    (But the yellow exclamation mark still harasses me.)
    --- Go to "Setup new connection" ---
    "Choose a connection option"
    Click on "Connect to the Internet"
    Response: "Windows did not detect networking hardware"
    As near as I can tell, that translates from error 0x8E5E0247
    I have this same error on other yellow exclamation marks respective of what kind of device it is.
    => To test my sanity, I put the old hard drive (same size) back in and except for the impact of slowness due to error retries, everything works okay.
    Note:
    Same issue (hardware not detected) for Video adapter and Audio.
    I bought new USB Wireless adapter to test, and the driver installed but not activated because "not digitally signed", and that same issue fits all the above hardware.  I down loaded them from Toshiba, and they are confirmed installed, but not accepted with digitally signed.  I have uninstalled and reinstalled with same results.
    Solved!
    Go to Solution.

    I'm discovering I am not as well as I thought... running on the  AF hard drive which was built with a copy drive from old format drive which was the product of system recovery disc set.
    Review for context: Advanced Function HDD
    Scenario that exposes harm caused by cloning data from 4K blocks drive to 512 bytes blocked drive (AF)
    Toshiba supplied Windows-7 System Restore Discs: to factory state
    Then I built the Windows-7 Repair  Disc... used later.
    Hard drive was replaced when it caused SMART warning at every system boot.
    Acronis was only utility that quickly detected problem (3 sectors had permanent read errors.) Active@Disk Image and Power Quest Drive Image (Ghost) did not detect the issue.
    I tried Seagate 500 GB and Western digital 500 GB HDD drives as copy target.
    That new drive would not boot: "Required source not found"
    Booted My newly created Windows-7 repair disc, and used to to fix startup.
    See images.
    That worked and then the ST9500423AS disc booted.
    Now... next day I discovered Window Update is not working.
    I get message:
    Windows Update cannot currently check for updates, because the service is not running. You need to restart your computer.
    I ran Microsoft Fixit for updates.  It says it fixed two items.
    I still have the problem.
    The service shows "started"
    Control Panel/ ACTION Center/ Maintenance/ Check for Updates
     "No action needed"
     "Windows Update does not require any action"
    I checked  Update History...
    ... It is empty, else window is vacant... blank.
    Soooo..... for a sanity check, I swap out hard drive; go back to the old format (which is the one I copied).
    It works!  7 updates to install, including SP1... but I did NOT install them.
    Switch back to the AF drive... Update doesn't work. I am broke again.
    Is this another strange problem caused by the Advance Format issue?
    What to do?
    By the way... I did install an Intel storage Matrix driver  update, but I do not have RAID chip, so that driver is not for me... unless I missed out on something.
    Carl

  • Windows did not detect any networking hardware iMac 27' 2013 model

    Installed windows 7 using bootcamp now when I go to connect to a network it says windows did not detect any networking hardware

    Did you install the windows drivers as well?

  • Trend Micro Anti-Spyware not detected by Network Magic

    Network Magic reports that anti-spyware is not installed.  Trend Micro Titanium is installed and running but not detected by Network Magic.  Any help is appreciated.
        Network Magic Version installed: 5.5.9195.0
        The type of connection to the Internet is DSL
        The Brand of Modem is Motorola
        The Brand of Router is Linysys, Model is WRT310N V2 and hard-wired
        The Connection in use on the problem computer: Ethernet Port through M-Board
        Operating system is Windows Xp Home, Service Pack Level 3
        Software Firewall in use: Windows Firewall
         Trend Micro Titanium Anti-Virus Program / Spyware Program is actively protecting computer

    Henry4324 wrote:
    I have Norton Internet Security and  PC Tool Spyware doctor installed on my laptop.  The operating system is Vista 7 home premium. 2  Network magic alerts indicate that my antivirus and antispyware programs are turned off. These alerts  refer to the programs that come with the operating system.  It does  not detect my 3rd party software programs which are up and running with no problems reported. Is there a way fix these alerts.    
    Hi Henry4324,
    I never heard of Vista 7 Home Premium.
    Please publish a link to this operating system. Thanks. You may have a bootleg copy. In which Network Magic isn't going to work correctly.
    thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
    Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

Maybe you are looking for

  • How to do this in SQL or User defined Function?

    Hello All I have a table STATUS_CODES which has values like this HRKEY ITEMKEY HRAS 1 HVAS 1 HXAS 1 SMST 2 SLRS 2 HWAS 2 PAYT 3 The HRKEY is unique Same ITEMKEY may be applied to different HRKEY (Item keyhas fixed values 1, 2, 3) Now I have a functio

  • Adobe Distiller converting to garbled text

    Hello, I work desktop services for a company. I have user who is trying to convert a ps file to a pdf. However when she does it converts to garbled text. I embedded the fonts that distiller says are missing, but once she goes to convert the ps file a

  • Moving average and standard cost

    Hi All, I purchase raw material and trading item. assuming that my raw material is based on standard cost and trading item based on moving average. 1) if both item have no more inventory, the difference price between migo and miro will charge to pric

  • Java.lang.SecurityException: showDocument url permission denied

    Hi, We get below given error in one of the java application when we use the java version which is higher than 1.6.0_24. java.lang.SecurityException: showDocument url permission denied at sun.plugin2.main.client.MessagePassingExecutionContext.showDocu

  • PS CS3 taking a long time to load and seems to "spin" when Reading Preferences.

    I've noticed this problem a few days ago, and am unsure what I should do about it. PS used to load very quickly, and now when launching, it will spin for a good 90 seconds while reading the preferences. Is there a way to reset the preferences? Is thi