Aspire Ethos 8951g Blinking Battery Light - Won't Boot

When I press the power button on my Aspire Ethos 8951g, the battery light blinks five times at a one second interval and nothing else happens. If I use the switch to disconnect the battery, the battery light does not blink and the computer will not boot. So far I've tried to do a power reset by using the switch to disconnect the integrated battery, removing the RAM, and holding the power button for 90 seconds. It had no effect.  I also bought a new AC adapter, which also had no efffect.  Does anyone know what the five flashes mean? I can't find it in any documentation. The battery life had been pretty good up until this point. 

IllN,
Typically the blinking battery light means it has no charge. Here are a few things I can think of:
Purchasing a new charging adapter rules that out. (good job!)
Is the charging port connection snug, or is it loose at all? Can you still see the pin inside the port?
Purchase a new battery.
Mainboard could be bad.

Similar Messages

  • Blinking battery light when fully charged

    My battery light is blinking (low battery power warning) but the battery is fully charged.  I installed a brand new battery, left the AC adapter on overnight, and this morning had a blinking battery light.  It doesn't seem to be a problem except that I won't be able to tell when the battery really is low?  Thoughts anyone?

    rahul.bhat wrote:
    On buying MBP with retina display, one of the Apple genius in the store advised never overcharge it and till date I am acting upon his advice.
    Also, he stated don't put your MBP for continuous charging. Charge it in the same way same as you do for your mobile phone.
    Anyways, I'll keep on looking charged status (100% charge) like what I and other iPhone users do.
    Actually, I take well care of my belongings and iPhone being a premium product, I raised this concern.
    Anyways, Thank you very much for your kind support.
    The genius was misinformed. There is no way to over charge an Apple battery powered device. The charging circuits in the device itself will never allow that to happen. Once the battery is fully charged, charging stops no matter what you do or don't do to the device.
    BTW, this is not an Apple thing. The over charge protection is actually part of the international engineering standards for smart lithium battery technology.

  • X220 won't start up - blinking battery light

    I cannot turn on the laptop with the A/C adapter plugged in both with and without the battery.  It seems the battery will not charge (no indication of battery status).
    Upon plugging in the A/C adapter, the battery light blinks in the following pattern:
    3 short
    1 long
    1 short
    Any ideas?

    SMG47 wrote:
    Hello gsforfree,
    Before contacting Lenovo Support I would try one additional thing.  Unplug the cmos battery and try starting up the x220 with the cmos battery still not plugged in.  Worth a shot unless u are still on warrantee in which case I would send it in for repairs.
    One other thing.  Is it possible that your ac adapter is broken and that your battery is in a discharged state?!
    Steve G.
    I'll try the CMOS battery when I can but it is not the A/C adapter as  successfully used mine for my T430s.

  • MacBook Pro won't sleep when lid is closed and battery lights won't work?

    I have a 2010 MacBook Pro 15" and ever since I got it, the battery indicator lights wouldn't light up (not that big of a deal) and the computer wouldn't sleep when I closed the lid.
    I've reset the NVRAM/PRAM, the SMC and verified/repaired my hard disk as needed.  But the computer still won't sleep when I close the lid (regardless if the machine is plugged into a charger or not).  Is there a known fix for this problem?  I've been searching through the forums and troubleshooting from advice that other people have suggested, but nothing seems to be working.  Any help is greatly appreciated!

    This exact thing happened to me. Resetting the SMC solved all my problems. Here's a link to how to do it: Intel-based Macs: Resetting the System Management Controller (SMC) Hope it works!

  • IMac G5 blinking power light / won't turn on

    When my iMac G5 is hooked up to power, the power light (front bottom right panel) faintly blinks once every 2 seconds or so. The monitor is not on at all, and the computer does not appear to be running (no sounds).
    All other devices hooked up to that particular power outlet are working fine, and pressing the power button does nothing. Holding the power button down halts the blinking, but when I let go the blinking resumes.
    I have also tried removing all devices attached to the computer, including the keyboard and mouse.
    This machine was working fine on friday, but when I came back into work today (monday) the machine was 'off' and nothing I do seems to cause any change.
    Very confused, any help appreciated.

    It may be that your Power Supply Unit is failing, look at the suggestions here, try them and if nothing works, call Apple. If you have a Rev A, you may qualify for the Repair Extension Program. (sorry to assume you didn't know about sleep, sometimes very basic things are not known to posters).
    Please let me know how you make out,
    Miriam

  • My tablet is just blinking red light - won't charge

    HIello.. I tried the rebot thing.. but no luck.  The only receipt I have is the one showing on my American Express card.. help!!!

    Connect to the wall charger the it came with for about 20 mins and try the 3 button reset.
    Be a Shepard and not an iSheep.

  • Satellite Pro A100 - Flashing battery light and no boot

    Hi
    I was sitting watching a video yesterday with my daughter when five minutes in my Satellite Pro A100 suddenly stopped working - cut out completely and wouldn't start up again. When I tried to restart the orange battery lit blinked eleven short flashes, and nothing else happened. The battery has been poor for some time, so we always run of the AC adaptor. At present the adapter is plugged in, but there is no blue charging light as I would expect.
    With the battery removed do not get the orange flashes. With the battery in, and no AC adaptor, I do get the orange flashes.
    I wondered if the AC adaptor had gone, and we didn't get a 'low battery' warning because we were watching a video. That would explain the lack of charge indicator. When we get the orange flashes we're getting this from the small amount of residual charge in the battery.
    Can anyone else back this idea up - or anyone who can interpret the error code?
    Thanks
    Keith

    Hi, yes you're correct - no way of starting the machine. Nothing happens when the power switch is pressed, except 11 little orange flashes.
    The adaptor for this model seems to be a slightly unusual type - 19v maybe? I'm on to power adaptor number 4, and am beginning to get tired of buying them! Unlikely I'll be able to find a friend with a similar one.
    I'm veering towards binning the machine and buying a new one - the screen is defective anyway and I'm running off an external VDU, so maybe it's just falling to pieces in stages!
    Keith
    Message was edited by: duotwr

  • T420s No power, blinking power Led - won't boot

    My 2 months old T420s declines to boot since this morning.
    After pressing the Power-Button it starts to alternatingly flash the Power-Button light and the fingerprint reader LED.
    Nothing else happens, no fan starting to run or anything else.
    I haven't changed anything since yesterday when it booted with no problems.
    Does anyone know what this could be?
    Solved!
    Go to Solution.

    All,
    For this particular scenario, it is most likely the system board.   It is probably still a good practice to pull the battery and AC and try to reset by pressing and holding the power button several times, for several seconds each time, and then re-attaching AC and try to restart.
    If the symptoms remain, please contact service for assistance.
    Best regards,
    Mark
    ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
    Mark Hopkins
    Program Manager, Lenovo Social Media (Services)
    twitter @lenovoforums
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • MacBook Won't Boot just on AC.

    My recent issues are power related.
    Won't boot. Reason: Dead battery at 0 mAh.
    Won't boot with dead battery even on charge...
    When I take out the battery, it won't boot anyways.
    I got lucky since I plugged it in when I left it off charge for the night, and went away about 10 minutes, and it boots. Now that won't boot it up... I take out the battery and tried to boot it since I know it's dead. Nothing.
    I have 2 MagSafe adapters (One is OEM and is spliced (Charges and fine), and another is not OEM (stupid eBay lied) ) and when I remove the battery to boot just on AC power, nothing. Tried both chargers, both plugs, 2 tips and extension cable, Nothing.
    I noticed the light is a dim green when I plug in my OEM charger to my MacBook.
    So how can I get it to boot on just AC power? Noone I know has any type of Mac...

    If your MacBook won't boot on just the AC adapter, and you are certain the AC adapter is not damaged, then there is a hardware issue with your computer that needs to be repaired.
    ~Lyssa

  • Won't boot up - sleep light blinking 3 times

    Hi - I have a macbookpro - it suddenly shut down and now won't boot up. When I press the power button I hear the hardrive make a noise " tzz tzz' then nothing - except the sleep light is blinking 3 times a second every few seconds. - I've tried taking out the battery and holding down the power button - taken out the RAM - nothing.
    and of course my 90 day warranty ran out last week -
    Help gratefully appreciated....

    Hi - Thanks for your reply, I had a look round the net and found that diagnosis - I don't think it's applicable to me as the machine was up and running to start with. My girlfriend was ill in bed and watching a dvd - could this have overheated the machine and are the 3 flashes to do with this? I've since found this
    http://static.scribd.com/docs/1ek00bgxjmm4u.swf?INITIAL_VIEW=width
    which says it could be down to overheating - if so is there a way to reboot or is it a trip to the mac store ??

  • My MacBook Pro has a faint blinking orange light on the charger but won't turn on, I've tried many different things to restart it but nothing works

    My MacBook Pro has a faint blinking orange light on the charger but won't turn on, I've tried many different things to restart it but nothing works

    The battery's probably drained and the power brick on the fritz. Unfortunately, if she won't start there's little we can do for software-based diagnosis. You'll have to take it in to a Store or Service Provider for assessment.

  • Laptop won't boot caps light and Num light blink

    My Ts2-1375dx won't boot after I have shut it off and turned it back on. I get the cap & num lock lights blinking once. I remove the powercord, battery and all attached peripherals, hold the on button for 30 seconds reconnect the power and try booting again. Although this works (maybe after 1-3 tries) I don't believe that this is the way you should have to boot the computer. I also see lots of the same problem with the solution being the method I use. WHY IS THERE NO PERMANT FIX?!?!
    This question was solved.
    View Solution.

    Please try understanding the root cause for the issue by understanding the LED blink codes from the following weblink:
    HP Notebook PCs - Computer Does Not Start and the LEDs Blink or the Computer Beeps
    Provides procedures for resolving problems identified with blink codes or beep codes during startup
    I am an HP employee.
    Regards,
    Vidya
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
    ***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

  • Yoga 2 13" Dead? Battery light blinks 3 times but will not turn on.

    Just purchased a Lenovo Yoga 2 13" about 3 weeks ago. I like the PC, but I have an issue. I was using it last night and I shut it down and left it to charge. Today when I went to turn it on the battery light blinks 3 times (1 second on, 1 second off x 3) and that's it. It won't boot at all. Have tried holding the power button for 3 - 30 seconds and pressing the reset button but all I get is the 3 blinks of the battery light (no power button light at all). Is there anything I can do? Hard reset button combo or anything like that to try? Thanks.

    I'm having the EXACT same problem! The light blinks 3 times and the holding of the power button will not work either. My laptop said the battery was dying and was at 10% and before I could figure out why it wasn't charging, it died completely and the power cord will not charge it any more for some reason. I have only had this laptop for 6 months! And I replaced my old laptop (Yoga 13 original because of charging problems too!) I'm so upset about this. I will NEVER buy another Yoga/Lenovo.

  • I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light.

    I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light. Can anyone who has made this change offer some advice?

    apikoros wrote:
    The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
    1)  I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access.  But do I have to  change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
    Resetting the password you will need to do for each device... the utility cannot even see those old units.
    So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
    2)  Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
    N.Korean hackers.
    [Edit] Whoops-- one more question:  I want to partition the TC's disk, but Disk Utility doesn't see it.  What do I need to do?
    You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
    Look at Q3 here.
    http://pondini.org/TM/Time_Capsule.html
    Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.

  • MIFI4620LE Jetpack blinking amber light--does this mean the battery is bad? Should the unit operate without the battery installed if plugged in?

    MIFI4620LE Jetpack blinking amber light--does this mean the battery is bad? Should the unit operate without the battery installed if plugged in?

    The MIFI4620LE Jetpack does not work without a battery installed, even when connected to an external power supply.
    I personally think that was a dumb design. I would think the unit would use more electricity when continually charging the battery than just powering the unit it's self, but that's the way Novatel made them.
    If your Jetpack works with the battery installed and connected to an external power supply, but does not power on with power supply disconnected, I would say that the battery is defective or worn out.
    You should be able to go to a nearby Verizon Store and have them either test the battery or put a new one in it to see if it works. Then you will know if you need to spend the $$ for a new battery. OR if you always use your Jetpack at home, or in your car, just use the old battery connect to a power supply or your cigarette lighter and save the cash.
    As the Customer Support person stated, the slow blinking amber light is a normal state when the Jetpack is turned on and connected to Verizon's service.
    I hope this solves your problem.

Maybe you are looking for

  • Report of sales orders with several schedules lines

    Hi all, I try to develop a report for sales orders and delivery info. I need sales order quantity, delivery quantity and the quantity in the scheduled line. But I faced with the problem of several scheduled lines. I could not find the relation betwee

  • G5 wont boot from hard drive after install

    ok, so i bought my G5 from the school i go to but under their confidential stuff they had to take the hard drive from the computer before they could sell it to me. i thought that would be just fine as i could just get a new hard drive to replace it.

  • How can I modify the opacity of my toolbars?

    I am in process of setting up a new PC. I installed FF8 and imported my old bookmarks. The toolbars across the top are all opaque. This part of my desktop can be see (a little blurred) which make it very difficult to pick out toolbar buttons!

  • How to set computed property as summary property

    I followed Beth's blog to create AddressBook project in VS2013 update 4, I create computed property(FullName), when I switch to HTMLClient screen, the computed property disappears, and I can't set FullName as Summary Property, please help me

  • IPhone 3GS Warranty

    Hi guys, Ive had my new iPhone for about a month now and I brought this via the online Apple Store. I am from New Zealand and I was just wondering about my warranty and how do I apply for one? Is there an online website or does apple need to send me