Aspire R11 (R3-131T): Locating the SSD and other general upgrading questions

So, I managed to find the RAM with no problem, but I can't find the SSD. I'm starting to think it is just integrated into the motherboard, but at the same time, I'm told I can upgrade it.

Questions:
1) how do I upgrade the size of the SSD?
2) there is this small area next to the motherboard. The void is filled with a metal brace. Can a SSD be placed there? And if so, how would I connect it to the motherboard?
3) can the CPU or GPU be overclocked? I understand that there is no fans, so it would have to be minor overclocking.
4) is there a way to increase cooling, whether that be via fan or heat sink?
5) aside from the SSD and RAM, is there anything else that can be upgraded?

Similar Messages

  • Best Font for Subtitles? and other General Subtitling questions?

    I've never had to use subtitles, until my current project, so I am looking for some general advice and suggestions.
    I will be using PPCS3 (on XPpro) as the subtitles (as in the kind that translate a foreign language) will be permanent.
    So here are my questions:
    1. What is the best font and or what is the most standard font for subtitles? (Font size and other characteristics may be worth mentioning here too.)
    2. Is it possible to have an outline around the text as opposed to shadow?
    3. What are some general rules of thumb for subtitles that apply to broadcast and cinematic productions?
    Thank you.

    See also:
    FAQ:Why are my titles blurry/wrong?
    Cheers
    Eddie
    PremiereProPedia   (
    RSS feed)
    - Over 300 frequently answered questions
    - Over 250 free tutorials
    - Maintained by editors like
    you
    Forum FAQ

  • I want to replace the hard drive on my 15inch mid2012 macbook pro with a SSD but I just cannot clone the HD or reimage the SSD and I've tried everything. Please help...

    What can i do to format, image and use the SSD as the primary drive on my macbook pro?

    Install the SSD in an enclosure and connect it to the MBP via USB.
    Open Disk Utility>Erase and format the drive to Mac OS Extended (Journaled).
    Then select Disk Utility>Restore.
    Drag the internal HDD to the Source field.  Drag the SSD to the Destination field.  Click on the Restore button.
    This may take a few hours depending upon how much data has to be transferred.
    When complete, Boot the MBP with the OPTION key. 
    Select the SSD and if it boots the MBP, swap the two drives.
    Ciao.

  • I have now purchased easy a twice which has cost me 14 pounds both times the video has not loaded i has come up with "!" its asking e to locate the file and i have tried to i typed in easy a on finder and spotlight and it hasn't come please help

    i have now purchased easy a twice which has cost me 14 pounds both times the video has not loaded i has come up with "!" its asking e to locate the file and i have tried to i typed in easy a on finder and spotlight and it hasn't come please help

    Janieburmy,
    You can always deauthorize all your machines from your store account page — just log in and view your account settings and there's a button to deauth all your machines. Which just means for the other machines, it will ask you for your store ID / password the next time you play a purchased song.
    So, let's try the filter experiment.
    On the start menu, click on "run". in the space it provides enter "regedit" without the quotes. This will open the registry editor.
    Find the heading HKEYLOCALMACHINE. Click on it.
    Find the heading SYSTEM inside it. Click on it.
    Find the heading CurrentControlSet. Click
    Find the heading Control. Click
    Find the heading Class. Click
    Find the heading that begins {4D36E965- Click
    Go up to the Registry menu and select "Export Registry File... command. Make sure the "Selected Branch" radio button is checked and save that off somewhere that you can find it.
    Delete the key named LowerFilter.
    Select the key named UpperFilter, right click, select "modify". Then edit the text in the dialog to just say "GEARAspiWDM" followed by hitting the return key, the return after the word is important.
    Then reboot, and see what iTunes does.
    To get the system back to its previous state. Run Regedit again and use the Registry menu -> Import Registry File... command and select the file that you saved off in the first section.
    I'm particularly interested in getting rid of the "AFS2K" driver in the chain — that's a old driver from a company that hasn't existed in years.
    To answer your last question, why am I doing this?... I'm paying off a karmic debt. And someday we'll start that Tequila for Toonz paypal account and then I'll be set.

  • I am waiting for a new iMac with two drives: SSD   conventional hard drive. How can I transfer only a certain number of applications to the SSD and the rest to the physical hard disk drive?

    I am expecting a new iMac (i7 with SSD). How can I transfer only certain applications along with the system, library etc. to this limited (space) HD and other applications to the conventional disk HD in order to save space on the SSD?
    Thank you,
    Gilles

    Tom Lassiter wrote:
    I have the same scenario, using an SSD for my start-up drive. I have copied my Applications folder to a mechanical hard drive and created symbolic link to it. The symbolic link resides on the SSD and works properly.
    That may not be the best solution.  Many updaters expect apps, especially Apple apps, to be in the  /Applications folder on the OSX drive;  if there are updates, the apps may not be found, thus may not be updated.  I don't know if the installers/updaters will follow a symbolic link or not.
    DItto some apps, especially Adobe apps, won't even work if they're anywhere else.  Again, I don't know if they'll follow a symbolic link, either.

  • Purchased Direct Access from iTunes.  I cannot locate the download and I cannot download it a second time.  Any ideas as to where the original download might reside?

    Purchased Direct Access from iTunes. I cannot locate the download and I cannot download it a second time. Any ideas as to where the original download might reside?

    Hi rogerfrommilwaukee, 
    Welcome to the Apple Support Community!
    Previous purchases can be located in the Purchased section of either your iOS device or in iTunes on a computer. The purchases will be available to re-download as long as they are still available in the App Store and you are using the same Apple ID. Please use the attached article as a reference. 
    Download past purchases
    Cheers,
    Joe

  • Hi, using iphoto 6, i suddenly lost albums: they are still in the directory, but no pictures in some albums.Using finder, I can locate the pictures and even get preview. But impossible to import them. Anyone can help? thanks

    Hi, using iphoto 6, i suddenly lost albums: they are still in the directory, but no pictures in some albums.Using finder, I can locate the pictures and even get preview. But impossible to import them. Anyone can help? thanks

    Try these in order - from best option on down...
    1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library allowing it to overwrite the damaged file.
    2. Download <a href="http://www.fatcatsoftware.com/iplm/"><b><u>iPhoto Library Manager</b></u></a> and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
    3. If neither of these work then you'll need to create and populate a new library.
    To create and populate a new *iPhoto 6* library:
    Note this will give you a working library with the same Rolls and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
    Move the iPhoto Library to the desktop
    Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
    Go into the iPhoto Library on your desktop and find the Originals folder. From the Originals folder drag the individual Roll Folders to the iPhoto Window and it will recreate them in the new library.
    When you're sure all is well you can delete the iPhoto Library on your desktop.
    In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.

  • My location service is not working from the day one the response is that (cannot able to determine the location) .What can i need to do to see my location in maps and other application even the location services is enabled in the settings?

    From the day one the response is that (cannot able to determine the location) while using ios5.1 .What can i need to do to see my location in maps and other application even the location services is enabled in the settings?.Which means that is there is any problem in my ipad ? currently running on IOS 6.

    Your location is determined from a location database which contains the MAC addresses of routers and their physical location. A MAC address is a unique number which is built-in to all network devices when manufactured. The database is built and updated by actually driving around and mapping router locations.
    Since you just moved the location of your router has not been updated in the database and when you use Maps you will see your old location.
    If you go outside your house you can be correctly located because your iPod sees other routers which are in the location database. Note that you do not need to be connected to a router for your iPod to see it and obtain its MAC address.

  • What's the difference between the ssd and hd?

    I'm in the process of buying a Mac book pro but wanted to know and understand What's the difference between the ssd and hd?

    DDHeadley wrote:
    What's the difference between the ssd and hd?
    HD = hard drive, several metal platters stacked and data read/written magnetically.
    Pro's - less expensive and higher capacity of storage. Can scrub the drive of unwanted data. Unlimited write capability.
    Con'- bit rot can cause data and operating system to not be as reliable, mechanical moving parts means you can't move the machine while it's on.
    SSD = Solid State Disk, basically memory chips that can store data in a permanent fashion without power (like Random Access Memory needs)
    Pro's - faster read/write speeds in most cases. Shock resistant makes them ideal for portable uses.
    Con's - new technology issues, one cannot securely erase the data on them, unless it's ground into a fine powder. Limited write capability means they will wear out eventually like USB thumb drives do. Wear leveling (TRIM) is used to spread the writes evenly across the drive to maximize it's lifespan.
    If you can respect the machine, take care of it and not move it while it's on, or need to scrub the drive of unwanted data, or need higher capacity of storage without paying a fortune for a very large SSD, then a HD makes a lot of sense.
    It really comes down to your privacy, do you want a machine you cannot delete files off of?
    Do you want to carry around a machine that has all your dirty secrets etched in it for anyone with the right software to uncover?
    A computer is a personal machine, why it's called a Personal Computer. We all do things we sometimes are later ashamed of and want to erase all memory of it.
    Can't do that with a SSD, it knows all and you will be forced to destroy the machine to rid it of the unwanted data.

  • HT1711 there is a youtube video, and i wish to locate the audio and place it on my ipod,can this be done?

    there is a youtube video, and i wish to locate the audio and place it on my ipod,can this be done?

    Syncing between iPhoto on your iPhone and iPhoto on your Mac is one-way.  You can sync selected albums, events, faces, places albums from your Mac to iPhoto on your iPhone using iTunes. This will not delete any albums you created on your iPhone, just add new albums. But albums you create on your iPhone cannot be synced to your Mac.
    See this page on how to transfer photos from iPhoto on your iPhone to your Mac:
    http://help.apple.com/iphoto/iphone/2.0/?handbuch#blnk7d8f763e

  • I bought an ipod touch at a pawn shop and it has account registered to another person on itunes. i was wondering since i started my own account with itunes and tried to sync the music and other apps to my account would it erase everything on the ipod

    i bought an ipod touch at a pawn shop and it has account and registered to another person on it and i don't know the password. and i started my own itunes account on the computer and when i connect the ipod to the computer the other persons account shows up to be synced to the computer and when i hit the sync button it says that the ipod can only be synced to one library at a time. then it says that it would erase his library contents and all other apps in order for it to be synced to my account. so i was wondering if there is anyway to sync all the music and other apps to my account with out it erasing everything on the ipod.

    Do what iTunes is telling you to do.  Wehn you purchased the iPod the apps and other media do not transfer to you.  Then are permently locked/lienced only to the person who purchased them.  Using the stuff on the iPod is stealing.

  • I bought an ipad mini from some guy returning to the states and when i upgraded its os version its now asking for his apple id which i dont have. what should i do

    i bought an ipad mini from  some guy returning to the states and when i upgraded its os version its  now asking for his apple id which i dont have. what should i do

    That is Activation Lock.
    You have to contact the previous owner to have him remove it
    Find My iPhone Activation Lock: Removing a device from a previous owner

  • I am playing in Pogo and cannot open the games even though the homepage and others will open. The message is THE CONNECTION WAS RESET WHILE THE PAGE WAS LOADING. How do I fix this???

    I am playing in Pogo and cannot open the games even though the homepage and others will open. The message is THE CONNECTION WAS RESET WHILE THE PAGE WAS LOADING.
    All my friends are playing and it seems I am the only one have this problem.

    The "The connection was reset" error message can be caused by a bug fix for the BEAST (Browser Exploit Against SSL/TLS) attack that the server doesn't handle.
    *[[/questions/918127]]
    *[[/questions/918028]]

  • Can I use a deactivated verizon G'zOne Ravine phone for its nonphone properties such as the alarm and other functions? Do I have to do anything special?

    Can I use a deactivated verizon G'zOne Ravine phone for its nonphone properties such as the alarm and other functions?
    Do I have to do anything special?

    Just charge it

  • I have a G5 iMac. The browser and other apps were deleted by mistake.  If I had a working browser I think I could recoverss the other apps I need.  Question is .... Where to start without a browser?

    I have a G5 iMac. The browser and other apps were deleted by mistake.  If I had a working browser I think I could recover the other apps I need.  Question is .... Where to start without a browser?

    Well, go to a library or friends house & download file.  Do not expand. copy to zip drive. etc.
    Here is how to download iCab from the terminal.  the curl command reads html page.  I fished out the download link.  I think you want 501.  To get link, click on what download you want.  In the page that comes up . Look at the http source.  search for auto & copy link.
    http://icab.de/dl.php
    Macintosh-HD -> Applications -> Utilities -> Terminal
    # copy the following line to terminal.
    curl -O  http://www.costantini-net.de/iCab/iCab305_UB_OSX.zip
    # Or
    curl -O http://icab.clauss-net.de/icab/iCab_501_UB.zip
    # my termina commands.  Put file in home folder.
    mac $ curl -O  http://www.costantini-net.de/iCab/iCab305_UB_OSX.zip
      % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                     Dload  Upload   Total   Spent    Left  Speed
    26 6592k   26 1729k    0     0  44360      0  0:02:32  0:00:39  0:01:53 40984^C
    mac $ pwd
    /Users/mac
    mac $ ls i*
    iCab305_UB_OSX.zip
    mac $ ls -l i*
    -rw-r--r--   1 mac  staff       1M Jul 16 13:49 iCab305_UB_OSX.zip
    mac $

Maybe you are looking for

  • Can someone please help me with the installation of Adobe Premiere.

    Hello guys,  i am running a windows 7 64 bit home premium 2.00 ghz pentium b940 sandybridge processor.  500gb hard drive, 4 gb ram, and i have been trying to install a trial of adobe premiere for 2 DAYS!  I'm getting very frustrated.  Please help me.

  • Problem with my iPod Touch

    Every time I tried to play music or an app my iPod would crash, so I tried restoring it, and backed it up, but it wont finish restoring, and says I need to insert a disk to complete the installation, which I don't have. What can I do to fix this?

  • Javascript to JSP question...Can javascript function set session attributes

    hello, i have a web app that, on one of its pages, displays "tabbed pane" as an image map at the top (a la amazon.com). my problem is this: each "logical" page contains separate forms that all use the same javabean. in other words, imagine that the t

  • PBDOM : Exporting to XML file gives a single line

    I've been starting developing with PowerBuilder 12.5 a few weeks ago. I had to write some XML files, so I got familiar with the PBDOM library. I can build a lot of different things, it's very nice, but one thing still bothers me : In the output file,

  • The user session for a SAP GUI for HTML could not be created/generated.

    Hi, May I know what could be the issue for the above issue? We are trying to request for a ITS in a c#.net program with the following codes. HttpWebRequest request = (HttpWebRequest)WebRequest.Create(strURL); request.Method = "Get"; request.ContentTy