Aspire R7 572G touch screen stopped working after a windows 10 upgrade, pls help

I did a windows 10 update, but to my dismay I lost my touchscreen functions. I checked the properties on MY COMPUTER and it now says, pen and touch input not supported. Help pls

Hmmm.. I upgraded my R7 572G but my touch screen is ok. I'm not sure what you did. However, my problem was the screen does not auto-rotate in Windows 10. So I went to this folder to run as administrator to fix the auto rotate problem and it works. C:\OEM\Preload\FIXAUTOROTATE\EnableRotate.cmd

Similar Messages

  • Yoga 13 touch screen stopped working after update KB3000850, please help!

    Hi, my Yoga 13 touch screen has been working fine until yesterday. The laptop came with Windows 8, and last year I upgraded to Windows 8.1 without issue. Yesterday, I installed optional update KB3000850 from Windows Update, and immediately the touch screen stopped working. I have tried the following methods, all without success:
    * Uninstall KB3000850 from Windows Update
    * Use Windows Restore to restore to the point before yesterday
    * Re-install Intel Chipset Driver from Lenovo official driver page
    * In Device Manager, uncheck all the "allow system to turn off to save power" options for the USB input devices under Human Interface Devices then restart
    * Two-button shutdown and restart
    * Install Lenovo Driver Manager and let it check for new drivers
    * Download Cando multi touch panel driver (Note: I could not install the driver because all I got was a .cab file which does not allow me to install)
    As of now my touch screen is still not working. Computer Information page from Settings shows that there is no touch or pen device for my screen.
    Can anybody help me with this? Thanks!

    Very true, this has been a known problem since the first day Lenovo released the Yoga 13.
    I need to send Lenovo a bill for my time spent rebooting.  So far i am on my 8th reboot.  In the past, around 5 reboots after winddows update would work.  This time... who knows.
    Of course it always happens when you have a deadline.
    Please post back if you have found a better soultion than system restore.
    Thanks for posting this issue.  More users need to bring this to Lenovo's attention.

  • My HP Envy touch screen stopped working after getting an HP Bios update yesterday

    Can someone please tell me how to fix my touch screen. I received an HP BIOS update which caused my touch screen to stop working. I've tried re-calibrating it but it won't accept my touch which tells me the screen is no longer enabled.
    I tried finding where to enable and could not find where to enable finger touch. I've also tried looking for driver updates and the driver appears to be up to date.
    Thanks
    This question was solved.
    View Solution.

    I have a different type of TouchSmart, but this may work for you:
    Press the Windows logo key + X (if using a Windows 8 computer -- if Windows 7, click the Start button, type Device Manager, and click Device Manager in the search results).
    Select Device Manager from the list.
    Click the little arrow next to Human Interface Devices to expand the list.
    Click the touch screen driver (in my case, NextWindow Voltron Touch Screen).
    Right-click, and select Enable from the list.
    Click Yes if a dialog box asks if you are sure you want to enable the touch screen driver.
    On some models, it isn't obvious which device in the list controls the touch screen. I have read in other posts that some people have fixed the problem by disabling and re-enabling each device.
    If that does not work, you might try going to hp.com (http://www8.hp.com/us/en/support-drivers.html) and clicking Drivers & Downloads.
    In the search field, enter your product name or number, and then click Go. Select your operating system from the drop-down list under Select your operating system, and then click Next. If there are any available graphics drivers under Select a download below, click the plus sign next to Driver - Graphics, and then click the driver name. In the Download options and information window, click Download . Follow the onscreen directions to download the driver. Restart the computer.
    ~Lil.Liebe
    Clicking the white KUDOS THUMBS UP on the right is a way to say thanks!
    Click Accept as Solution on a reply that solves your issue to help others in search of answers.

  • Touch screen not working after installing windows 8.1 hp pavilion ts 15-n200se laptop

    touch screen keybord is comming but touch screen is not working no responses...plz help me

    Hi @jewaxen 
    Welcome to the HP Forums!
    It is a fantastic  place to find answers and information!
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I grasp that your touchscreen is not responding.
    Was there any changes made before this issue occurred?
    Have you checked for viruses or malware?  Microsoft Malicious Software Removal Tool
    Have you ran the  HP Support Assistant   to aid with HP updates and resolving issues?
    Have you tried using Using automated troubleshooting (Windows 8)
    Here is a link to Troubleshooting touch screen issues in Windows 8 that will guide you through some steps.
    If after completing  the steps in the above link the issue remains, I suggest contacting HP support for further assistance.
    Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
    World Wide Phone Support
    Good Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Why did my brand new Ipod 5g 32gb touch screen stop working?

    So I got this ipod from the Genius Shop for about a month. A few days ago when IOS 7.1 came out, I updated it. However, the ipod seems to lag a little. Today, I was charging my ipod and for some reason, when I turn it on, the touch screen stop working (the ipod is in perfect condition). The home button, volume button and the on/off button all works fine except for the touch screen. I want to restore everything on my computer, but I can't get pass the lock screen (the touch screen seems to stop working). I just can't do anything on this ipod anymore beside turning it on and off. I can't even power it off because the touch screen is no longer touchable. So how can I restore everything, or do something about this ipod to work again. Can I still take this back to the Genius Shop and get another one without additonal charge?  

    If the reset does not work try the remaining items of:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • Touch screen stopped working on iPhone 5

    Hi guys,
    My brother is using iPhone 5 in iOS 8.0.2 v and suddenly his phone start searching for the antenna and the touch screen stopped working (I can't even side to unlock )!! The screen will be on still the phone reset automatically and when is up it will search again for the antenna and every steps repeat all overThe screen Really got confused what had happened to phone. Even I try to reset it by holding Power bottom and Home bottom after resetting nothing has changed. Also the bottoms stopped working while the screen is on (when I'm holding the Power bottom it won't show me to side for power off )
    Every time I had a problem I posted my problem here, but i got nothing from anyone, if is it for my bad English I'm sorry but I really need some help here.
    What can I do!?
    Thanks

    First, try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. If this does not work, set it up as new device without using the backup, in case it contains corrupt data causing this problem.
    How to back up your data and set up as a new device
    If still no luck, get it serviced by Apple:
    Apple - Support - Service Answer Center

  • Touch Screen stops working while charging

    Hi All,
    I have just purcahsed a Torch 9810 and have uploaded it with latest OS 7.1. I am facing problems like :
    1. The touch screen stops working while the phone is getting charged.
    2. The screen gets hanged very frequently. Should we use it very calmly or is it hanging because we use it too fast. For this condition,solution i am left with is a HARD RESET. But till when this will help. Please suggest some work around.
    3. When i select Loud profile,for sometime it works and after that it stops working. I try to ring it manually by going to LOUD profile sound settings and pressing the TRY IT option. I do use a cover. Does it makes any difference ? The problem goes when i do a HARD RESET. But why is this happening ? Any Other setting neds to be done ?
    Please HELP or Suggest what to do !!!!!
    Regards,
    Ronak Gupta

    This is probaly a software problem in my opinion this could probably be resolved at the genius bar in any apple store also your phone should be under warranty as it is a iphone 5 and they did not come out not so long ago so in other words go to a apple store and they might have to replace the phone. In my experience this has nothing to do with the cable but a software issue in ios did this issue happen in any earlier version of ios

  • My touch screen stopped working...on my brand new replacement iPod touch.

    I recieved my replacement while on vacation in Vegas, about five days ago. My new iPod has been kept nice and safe in it's case without any bumps that could damage it. Today, May 4th, I go to school with a perfectly working iPod. On my way home, kept safe in my pocket all day, the touch screen stopped working, and restarting it didn't fix it. It's brand new, so whats wrong and how can I fix it PLEASE!

    yes i have the same problem. But also other then the fact that the touch screen doesnt register it is really dark, like there is no light bulb

  • Why did my touch screen stop working?

    Very upset my touch screen stopped working on phone new years eve.  What could be wrong??

        flakris,
    Oh no! This is not what we like to hear. I want to make sure that we are able to get your phone back up and running. Is there any kind of physical or liquid damage to the device? Can you try to press and hold the Power and Volume Down buttons until the device powers off then release (approximately 10 seconds). Please keep us posted.
    KevinR_VZW
    Follow us on Twitter @VZWSupport

  • Lenovo A1 - Touch screen not working after digitizer replacemen​t

    After dropping my tablet and breaking the digitzer, I ordered a replacement digitzer from a company in China. (It took about a month to get it) After watching this video, I was able to install my new digitizer and it finally looked new again....well at least the screen!
    But.....when I powered up my tablet, the touch screen wasn't working..... I emailed back and forth with the company and they told me to install drive program, and send me a link to a site with a video, this site may have contained more than the video, but it was all in Chinese and I couldn't figure it out even with Google Translate. So I started researching. I thought I would try and load ICS on it, I thought, "Whats the worst thing that could happen?" it wasn't much more than a brick at this point anyways. 
    I found this website that let me through installing ICS on it. I had absolutly no expectations...but IT WORKED!!!! MY TOUCH SCREEN IS NOW WORKING!!!! I COULDN'T BELIEVE IT!!!
    When I was researching for this problem, there was absolutly no posts anywhere for "Touch screen not working after new digitizer". So I wanted to share my experience.

    Yea you are correct.....it must be a hardware problem. You must contact service centre of Lenovo and get help from there.
    You can say thank you by pressing the star left to my post IF I HELPED YOU

  • My iPod touch screen stopped working, how do i fix it?

    My iPod(4th generation) touch screen stopped working. Okay so it was fine earlier, my home button does not work so i have been using the assistive button for months, and until earlier today it got stuck, i tried to power it off but it doesn't let me slide to power it off, and it doesn't let me press anything on the assistive menu either, and i'm currently waiting for my ipod to die but it's taking forever since it's battery lasts forever! is there any other solutions you can give me?
    and i was wondering if my ipod has life insurance with apple so if something is wrong with the screen, can i take it for a new one? (my ipod is in very good conditions, not cracked or scratched, just the home button is an issue)
    thanks!

    Try restoring via iTunes. If necessary. try placing the iPod in recovery mode using one of these programs and then restore:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                           
    RecBoot tip
    RecBoot may have problems on 64X windows, then try:
    Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single ClickFor MAC or PC           
    The Firmware Umbrella - TinyUmbrella
    Installs blootware on PC too

  • Ipod nano 6th gen touch screen stopped working please help

    Everything on the ipod nano 6th gen is working except the touch screen and once it goes to sleep i have to hold the sleep button and the volume down button to turn it back on. I went into the volume -, sleep, volume + menu and went through the tests and in the touch panel error check section it says i have IC error reported: 0xFFFFFFFF. Please help as i have reset and restored and update itunes etc. Do i need to send it in to apple? The touch screen was working at one stage and then i disconected from the computer while it said eject first (this is when the touch screen stopped working) and put the ipod on a different computer. The first computer was windows 7 which i used just to charge it a little and the second one im using is windows vista.

    I have had the same problem and changed three Nano's. Each time the fault is diagnosed by Apple as "water damage".
    If you take your Nano to one of their maintenance centres they will look into either the headphone socket or the power dock and and tell you that you have infringed the warranty by somehow getting the thing wet.
    Basically is a poorly designed piece of kit whereas a simple shuffle is way more robust.
    I have given up with my Nano and am now using an old model

  • Sony vaio SVF14N16SGS TOUCH screen stop working suddenly help me to fix this

    hi alli buy sony vaio SVF14N16SGS and calibrate a touch screen i working with laptop but approximately befor 20 minute laptop touch screen stop working suddenly!!!!!!!!!!!!!i am very disapointment from sony Corporation for this bull******e bug please help me to fix iti appreciate it

     
    Hi Jimmy_N, 
    Thank you for considering Sony Community! 
    We're sorry to hear this issue. Please follow the troubleshooting steps here to isolate the issue: 
    Power cycle - Remove the battery and all peripherals -> press and hold the power button for 5 seconds OR, if the battery is not removable, remove all peripherals-> look for a battery off button on the bottom of the laptop -> push the button for 5 seconds
    Reinstall driver - Go to Device manager -> Human Interface Devices -> right click and select Uninstall (DO NOT DELETE). Restart the computer. The driver will be reinstalled.  
    Reset BIOS - While the unit is restarting, tap the F2 key repeatedly. Once in BIOS go to Exit tab -> Get Default Values -> Save the changes and Exit. 
    Update drivers from Sony's support website or from where you purchased the laptop. 
    Your Vaio SVF14N16SGS is not a U.S. model. We do not have the drivers and software that support your computer. For further assistance regarding your concern, please contact the Sony offices/Sony representative offices nearest to your place of residence in Asia Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to proximity, they are in a better position to respond to your questions or concerns.
    Hope these help. 
    Thanks,
    Vincent 
    If my post answers your question, please mark it as "Accept as Solution"
     

  • HT201371 Touch ID stopped working after updating to IOS 7.1.

    Good morning to all,
    My touch ID stopped working after updating to IOS 7.1.
    It was working perfectly until the update and then it stopped recognizing my prints
    I've reset the phone and deleted my fingerprints and now I can't even add a fingerprint again.
    I am sure this is not a hardware problem since the phone was working perfectly before the update and it didn't fall nor anything similar.
    Also the sensor is clean as well as my fingers.

    Same problem... I think we all should let Apple know of this issue. http://www.apple.com/feedback/ tell them the probelm. So when they get too many complains they will surely fix it ASAP with a software update.

  • My Ipod touch email stopped working after installing Update

    my Ipod touch email stopped working after installing the latest firmware update from Apple what should I do?

    Hi, jewlssch. 
    Thank you for visiting Apple Support Communities.
    If the Mail application will not launch, I would recommend processing any available updates on your Mac Pro and test launching Mail.  If the issue persists, process a reinstall of Mavericks.
    Reinstall OS X
    http://support.apple.com/kb/PH10763
    Make sure to backup all of your data prior to reinstalling OS X 10.9.
    Back up your Mac
    http://support.apple.com/kb/PH11371
    Cheers,
    Jason

Maybe you are looking for