Aspire V3-551 Won't boot, can't enter BIOS

A friend gave me her daughter's Aspier V3-551 to repair. When booted there is the Acer splash screen and then just a blinking cursor in the top left corner. I cannot enter BIOS with F2 even if I hold it down while powering up. No change if I remove the battery and run on AC and no response to F12. The HDD has what looks like good data on it. If I pull the battery and the HDD and power up I get the PXE boot screen that complains of no network followed by "Press any key...". Pressing F2 and many other keys causes the message to repeat (as expected), but pressing F12 causes no response at all. I believe this is a scrambled BIOS problem, but am not sure what is the best way to recover.If I create a bootable USB thumb drive, will I be able to get the machine to boot from that drive and not look for a PXE server?I could disassemble the chassis and pull the CMOS battery, would that help?Is there any other way to initialize the BIOS?Suggestions appreciated and "Thanks!" in advance.

Thanks for the comment. Didn't pull the battery, but found a great site for teardown info: http://www.insidemylaptop.com/how-to-disassemble-acer-aspire-v3-551-8469/ Spent a lot of time trying to find the right BIOS flash files, espically those containing .FD files mentioned on other sites. Used the CRITICAL Mode entry of Fn + Esc (with no battery) without a USB drive connected just to see what would happen. BIOS came back after restart! Set it to Defaults and that problem solved. BTW, this BIOS was only v1.02 which is not even mentioned on the Downloads support page - much confusion over what BIOS version applies to what machine, even with serial number entered. Now have corrupted Windows and tried Factory Restore with Backup using Alt + F10 during boot. That failed, so I ran the full recovery process (had manually backed up user's files earlier) which seemed to work. More trouble after the 20,000,000 Windows Updates tried to installed and failed. Cleaning that up now, but at least BIOS is back (and F12 option works as desired).

Similar Messages

P35 Neo2-FR does not boot, can't enter BIOS

Hi everyone,
just built a new system with
- P35 Neo2-FR (Rev 1.2, Bios v1.8)
- E8400 (C0)
- Aeneon AET760UD00-25D
- HiS Radeon HD4550 (tried a MSI NX7300 as well)
an, even after reading every thread on the subject on this forum at least 10 times,
following all recommendations, I still can't get it to boot up, it just hangs on the splash screen
I have four bricks of Aeneon memory, and tried all of them in slot 1, with one of them I encounter
a constant reboot, with the others the "hang" situation.
The lights always show as R-G-R-G which, according to the manual, indicates "testing memory",
but I can hardly believe ALL of these RAM modules, which are listed as compatibility "OK", are bad ???
Any suggestions ?
TIA !

Quote from: alex4 on 05-January-09, 02:55:16
Thanks for that, it didn't change a thing, however, whenever I reboot -> "CMOS Checksum bad".
F2 does the trick, but it basically means I can't modify any BIOS settings ???
CPU-Z reports it is a E8400-E0, and not a -C0 as I have been told, I didn't check before installing it,
I trusted the dealer :-X
"CPU-Z reports it is a E8400-E0, and not a -C0 as I have been told, I didn't check before installing it,
I trusted the dealer :-X"
I told you to double check it: {If its E0 the same hang will happend}
Quote from: BOSSKILLER on 04-January-09, 21:57:07
Read >>Posting Guide<<
Disconnect any USB devices and any other storages && re-test.
"- P35 Neo2-FR (Rev 1.2, Bios v1.8)
- E8400 (C0"
Double check both too.
"Thanks for that, it didn't change a thing, however, whenever I reboot -> "CMOS Checksum bad".
F2 does the trick, but it basically means I can't modify any BIOS settings ???"
Re-flash the same BIOS, but this time >>Use the MSI HQ Forum USB flasher<< to fix it.

GE70 2PC - can't enter bios after EC flash

So I've flashed my GE70 2PC with 1.506 firmware provided by MSI. Everything went smooth - it flashed without any errors and the laptop still runs.
However, I can't enter bios anymore. When the laptop boots I'm pressing DEL and it stops on a black screen with an underscore ("_").
I did the EC reset, I even left my laptop without any power supply (no batter and no DC) for the whole night and nothing.
I've contacted MSI and they sent me EC flashes from 1.500 to 1.5007 (without 1.5002). I've tried them all and nothing. Still can't enter bios, however, after rest the laptop boots Win 8.1 normally.
Any ideas/clues how to fix it?

No, I didn't update BIOS prior to EC flash. I also don't remember BIOS version.
However, it seems to be a common issue and MIS has a fix as I get this message from them:
Quote
Can't enter BIOS fix
« Sent to: DawidMisiak on: 13-November-14, 06:57:35 »
Remove this messageRemove
Dear DawidMisiak,
For the can't enter BIOS problem you mentioned in the forum, please update the latest BIOS version E1759IMS.620 in Windows.
Steps:
1. Download the file.
http://ftp://ftp2.msi.com/Temp/E1759IMS.620.zip
id: *********
PW:*********
2. Extract the file.
3. Run the "FLASHWIN64" under windows.
Let us know if you have any question during the update, thank you.
MSI support
Unfortunately, the link doesn't work anymore and I can't download the file.
Does anybody have an access to this file or MSI can you send me a valid link?

MSI Nightblade B85C how can i enter BIOS?

How can i enter BIOS in MSI Nightblade B85C ? I wanna change HDD order. Tahnk you for answer.

Does not work. (Steelseries Apex Raw USB keyboard). Also tried F2 and others.

Ipad won't boot; can't update ios b/c HD space; don't want to restore

Hi All,
I've got a friends iPad 4 and I'm trying to help him out. The device won't boot (just toggles between black screen and Apple logo). I can get it into the upgrade mode by holding the home buttong and connecting it to iTunes. When I do this, the expected prompt of update or restore appears. I try to update it, but it doesn't work because there isn't enough hard drive space on the iPad.
It seems the only option is to do a restore. But here is the problem - the device has my brother's wedding video on it, and my friend didn't back it up to the cloud. So the question is, is there anyway that I can (a) get the update to go through so the device will boot or (b) get the device into a bootable state without requiring an update or (c) get access to the HD to retrieve the video - all without loosing the wedding video?
I appreciate the help.

Hi All,
I've got a friends iPad 4 and I'm trying to help him out. The device won't boot (just toggles between black screen and Apple logo). I can get it into the upgrade mode by holding the home buttong and connecting it to iTunes. When I do this, the expected prompt of update or restore appears. I try to update it, but it doesn't work because there isn't enough hard drive space on the iPad.
It seems the only option is to do a restore. But here is the problem - the device has my brother's wedding video on it, and my friend didn't back it up to the cloud. So the question is, is there anyway that I can (a) get the update to go through so the device will boot or (b) get the device into a bootable state without requiring an update or (c) get access to the HD to retrieve the video - all without loosing the wedding video?
I appreciate the help.

Macbook Air won't boot - can I recover files this way?

I have a 1st-gen Macbook Air that won't boot. Will the following work to access any files on the hard disk?
1) attach powered USB hub to Air
3) attach external USB DVD drive to hub
3) hold down <option> and boot Air from 10.6 retail install DVD
4) attach external USB hard disk to hub
5) copy file from internal Air hard disk to external USB hard disk
Will that work?
Can I boot from a USB DVD drive that's connected through a hub?
Do I have to use an Apple Superdrive or will a 3rd party DVD drive work?
Thanks!

Axe,
Does it see the drive at least in Disk Utility and just not a mount point? If Disk Utility won't even recognize the drive over the PATA connection it's unlikely you'd be able to use terminal to extract data. If it sees the drive and the mount point is grayed out this would indicate directory damage (usually). If it sees the drive and there's no mount point this is often an indication of partition corruption or worse, hardware failure.
Hard drives are "funky" when they fail, sometimes. I've seen them lock up the I/O bus and prevent any action on behalf of the startup sequence. Only when the drive is removed and hooked up to an external drive dock/sled will it mount. The problem, here, is that the 1st generation HD has this really funky PATA/ZIF connection and most standard drive docks/sleds won't work.

Pismo won't boot, can't find the cause

I have a Pismo 500 that won't boot and I've torn this thing apart more times than I'd care to count and replaced every part I can think of. When I first got it it was working fine, but occasionally wouldn't boot properly or wake from sleep. When it wouldn't boot, I would press the power button and there'd be no chime, the fans would not spin up, and there was no sign of life other than the Num Lock or Caps Lock keys lighting up if pressed. What was an occasional thing is now permanent; it does this all the time now.
I have replaced the logic board, the PMU board, the AC/Sound board, and the PRAM battery. It continues to do exactly the same thing. It does this whether the PRAM battery is plugged in or not, so I have no way of knowing if the "New" replacement battery I got off eBay is actually any good or not.
Any help on this matter would be immensely appreciated as I would really love to get this unit working after the time and money put into it. Thank you.
Powerbook G3 500 (Pismo) Mac OS X (10.4)

Brash,
I take from your post that you can get the Pismo running...it is not totally dead. When up and running, open the System Profiler and see if it reports the presence of your 1MB backside L2 cache; failed L2 cache can cause no-starts.
Also, if you had a bootable 9.x CD, a cold start will present a dialogue box indicating a problem with RAM or cache memory if this is the case; this test does not run through a restart.
You can test the health of your backup battery although it is unrelated to your startup problems as you have verified:
http://docs.info.apple.com/article.html?artnum=30017
The only component left to replace is the microprocessor card. These do go bad plus it also contains the backside L2 cache.
If you have both memory slots filled, test each memory module separately.

G4 Cube, won't boot, can't eject DVD

hello, o great mac gurus of the cyberworld. here is my situation. i have a G4 cube that is being extremely tempermental. the something isn't working, and the machine won't boot. i inserted the os X install DVD and tried re-installing te software. of course, it failed. now i can't get the DVD out. i tried the eject key. i tried holding down the 'E' key on startup. i tried holding down the mouse button on startup. NOTHING.
help? any suggestions on what to do next? thanks to all who read, and especially those who respond.
erik

sorry, folks... found a post that had THE answer. thanks for looking in the short minute it was posted...

Razr M won't boot - can I get my pictures

My Razr M won't boot - it keeps hanging at the red eye. I've tried all the reboot options short of a factory reset. Before I do that I'm wondering if there is a way to get my photos off the internal memory. I've tried connecting with the USB but it doesn't recognize it since it won't power on. Any way to do this?
Thanks!
Toni

Were the photos backing up to Google drive or any other cloud storage? If they are only on the phone, you may be out of luck... (I have my photos set to auto backup to cloud whenever I am connected to wifi - so even if I lose a few, the majority of my photos and videos are stored in the cloud as well as my phone.)

HP Laptop Won't boot from Recovery CD. (bios is set correctly) Jumpers? Faulty Optical Drive?

Won't boot from HP Recovery CD. Bios is set for ATAPI CD/dvd as priority. Boot menu only shows HD.
More detailed:
Purchased HP recovery CD's from Hp. Put the CD in, went into the bios, set it up so the CD/dvd rom would be priorty in boot device. Saved and exited. Computer reboots, I press f9 to select from boot menu, Only the hard drive is shown. The ATAPI CD/dvd rom drive is not...I reboot and let it go past the first screen.
BOOTMGR is missing.
Press Ctrl alt delete to restart.
^^ That is where I am at. The CD-rom drive is functional, it spins, it works. The bios has it recognized.
(This computer DOES NOT have an OS, so I am trying to put a fresh install in it. The CD is bootable, it came from HP saturday. I tested it on my Desktop and it boots like a charm.
Help me please HP ;].

Hi! In your situation, I recommend ordering the recovery media from Toshiba. I'm thinking that your OS has been corrupted by a Virus and you no longer have the hidden recovery partition. I have replied on the other message also. If you have further questions, I will try to answer them as best I can. You can get the Toshiba recovery media here. Scroll down to the bottom to find recovery media.
Dokie!!
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

HP Compaq 6715s won't boot on battery after BIOS update

Hello!
I updated the bios of my HP Compaq 6715s with the latest version F.0E I downloaded from HP support site.
Everything went fine, but now it won't boot on battery alone anymore. It just flashes amber light on power indicator and shuts down. If the charger is connected and later disconnected when it starts loading Windows, everything is fine.
Please help, what should I do?

Hi:
You can try performing a hard reset of the notebook in hopes that it will solve the problem.
Here is the link to the instructions for this procedure.
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c01684768&prodT...
If that doesn't work, I'm afraid something went kerflooey with your BIOS udpate.
Paul

H67MA-E45(B3) won't boot, no beeps. BIOS?

It won't boot. The power LED comes on and fans spin, but I get no monitor activity and no beeps.
I'm theorizing this is BIOS related. My BIOS sticker says E7678 IMS170. I'm using a Core i3-2100 3.1GHz. The website says I need 7678v17.zip. Do I have this already? I can't make the connection between the BIOS sticker and the 7678v17 file.
I actually have two MB's, and two CPU's, and two sets of ram and a different power supply. No combination of MB, RAM, CPU, power supply, works. I went down to 1 stick of ram, no video card, and no peripherals. To my thinking it HAS to be the BIOS at this point.
Thoughts?

Yeah, I've got the 4pin plugged in.
MSI H67MA-E45 (B3) LGA1155 Intel H67(B3) DDR3 SATA3 A&GbE MATX Motherboard
Intel Core i3-2100 Processor 3.1GHz 3 MB Cache Socket LGA1155
Kingston Technology HyperX Blu 8GB 1333MHz DDR3 Non-ECC CL9 DIMM (Kit of 2) KHX1333C9D3B1K2/8G
Simplified loadout, so no fans but CPU, no HD, no CD, etc.
Corsair T650 power supply (known good)
I've tried it with and without the Sapphire HD 6850 PCIE Video Card.
I've got two sets of everything, one for each of my kids. Any help is appreciated to turn these xmas gifts around.

Multiple Yosemite woes: programs won't start, can't enter Time Machine, etc.

Hello Linc et al.,
I have been having Yosemite problems similar to those discussed elsewhere (e.g. iMac 27" late 2013 and Yosemite) (albeit with 10.10.1, Mid-2010 MacBook Pro): can't enter Time Machine, although it seems to be backing up; programs including Illustrator, EndNote, and Boinc don't start, or only after an hour or two (others, including Microsoft Office, seem okay). They will start normally in safe mode, but not for a newly created user. Many permission repairs carried out (seems okay except for a couple recurring printer-related messages), disk is okay, PRAM and SMC reset. Spent some time with various tech support, so most of these have been tried several times.
The solution here com.apple.xpc.launchd & com.apple.mdworker.bundles pollute logs with errors worked through one restart - there were two mystery uids, owning many files - but not through a second.
I have followed the permission repair procedure from another post (discussions.apple.com/message/27015992#27015992); the initial return was 639, and now it is 0. Restarted since then, nothing appeared to change.
Below is what I get from the test suggested in the first thread mentioned, I hope there is something informative here! I'll study it myself, but don't know what might or might not matter.
Thanks,
Barbara
Start time: 11:29:32 12/05/14
Model Identifier: MacBookPro6,2
System Version: OS X 10.10.1 (14B25)
Kernel Version: Darwin 14.0.0
Time since boot: 29 minutes
SATA
   HGST HTS541515A9E630
Diagnostic reports
   2014-12-05 mdworker32 crash x8
   2014-12-05 mdworker crash x14
   2014-12-05 plugin-container crash x2
   2014-12-05 xfig crash
Log
   Dec 5 11:14:35 com.adobe.illustrator.43768: Service exited due to signal: Terminated: 15
   Dec 5 11:14:38 WARNING: The Gestalt selector gestaltSystemVersion is returning 10.9.1 instead of 10.10.1. Use NSProcessInfo's operatingSystemVersion property to get correct system version number.
Call location:
   Dec 5 11:15:21 com.apple.quicklook: Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.quicklook
   Dec 5 11:16:39 en1: 802.11d country code set to 'US'.
   Dec 5 11:16:39 en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
   Dec 5 11:18:25 com.apple.imfoundation.IMRemoteURLConnectionAgent: The _DirtyJetsamMemoryLimit key is not available on this platform.
   Dec 5 11:18:39 com.apple.imfoundation.IMRemoteURLConnectionAgent: The _DirtyJetsamMemoryLimit key is not available on this platform.
   Dec 5 11:18:41 com.apple.imfoundation.IMRemoteURLConnectionAgent: The _DirtyJetsamMemoryLimit key is not available on this platform.
   Dec 5 11:18:47 com.apple.imfoundation.IMRemoteURLConnectionAgent: The _DirtyJetsamMemoryLimit key is not available on this platform.
   Dec 5 11:18:51 com.apple.imfoundation.IMRemoteURLConnectionAgent: The _DirtyJetsamMemoryLimit key is not available on this platform.
   Dec 5 11:18:58 com.apple.imfoundation.IMRemoteURLConnectionAgent: The _DirtyJetsamMemoryLimit key is not available on this platform.
   Dec 5 11:19:04 Recieved EWS error: Error Domain=MFEWSErrorDomain Code=117 "Id is malformed." UserInfo=0x608000e6b4c0 {NSLocalizedDescription=Id is malformed.}
   Dec 5 11:19:04 Recieved EWS error: Error Domain=MFEWSErrorDomain Code=117 "Id is malformed." UserInfo=0x608000c6ba00 {NSLocalizedDescription=Id is malformed.}
   Dec 5 11:19:11 BUG in libdispatch client: dispatch_mig_server: mach_msg() failed (ipc/send) invalid memory - 0x1000000c
   Dec 5 11:19:11 CoreText CopyFontsForRequest received mig IPC error (FFFFFFFFFFFFFECC) from font server
   Dec 5 11:19:11 CoreText CopyFontsForRequest received mig IPC error (FFFFFFFFFFFFFECC) from font server
   Dec 5 11:22:58 Error: execSQLStatement:onConnection:toCompletionWithRetry - SQL=COMMIT;, error-code=1, error-message=cannot commit - no transaction is active
   Dec 5 11:23:09 Error: execSQLStatement:onConnection:toCompletionWithRetry - SQL=COMMIT;, error-code=1, error-message=cannot commit - no transaction is active
   Dec 5 11:26:00 [com.apple.calendar.store.log.persistent.operation] [CalOperationQueue (x-coredata://UUID/ExchangePrincipal/p3): <CalExchangeSyncAccountOperation: 0x7f92fbe96830> failed with error Error Domain=NSURLErrorDomain Code=-1003 "A server with the specified hostname could not be found." UserInfo=0x7f92fe1cbfa0 {NSUnderlyingError=0x7f92fe3021f0 "A server with the specified hostname could not be found.", NSErrorFailingURLStringKey=https://EMAIL/ews/exchange.asmx, NSErrorFailingURLKey=https://EMAIL/ews/exchange.asmx, _kCFStreamErrorDomainKey=12, _kCFStreamErrorCodeKey=8, NSLocalizedDescription=A server with the specified hostname could not be found.}.]
   Dec 5 11:26:05 process WindowServer[150] caught causing excessive wakeups. Observed wakeups rate (per sec): 3474; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 120600
   Dec 5 11:26:05 com.apple.ReportCrash.Root: Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.ReportCrash.DirectoryService
   Dec 5 11:26:06 Error loading dyld shared cache uuid UUID: 0x8
   Dec 5 11:29:38 process smcDiagnose[687] caught causing excessive wakeups. Observed wakeups rate (per sec): 49533; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 48870
   Dec 5 11:29:38 com.apple.ReportCrash.Root: Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.ReportCrash.DirectoryService
kexts
org.virtualbox.kext.VBoxDrv (4.1.18)
org.virtualbox.kext.VBoxUSB (4.1.18)
Daemons
com.oracle.java.JavaUpdateHelper
   com.adobe.versioncueCS4
com.apple.installer.osmessagetracing
com.oracle.java.Helper-Tool
   com.cloudpath.maccmd
   com.mozy.backup
   net.cloudpath.HelperTool
   com.adobe.fpsaud
   com.bombich.ccchelper
org.macosforge.xquartz.privileged_startx
Agents
com.adobe.CS4ServiceManager
uk.co.markallan.clamxav.freshclam
com.adobe.AdobeCreativeCloud
uk.co.markallan.clamxav.clamscan
   com.mozy.status
org.macosforge.xquartz.startx
   com.hp.printerAgent
com.oracle.java.Java-Updater
com.citrixonline.GoToMeeting.G2MUpdate
com.nvidia.CUDASoftwareUpdate
   com.adobe.ARM.UUID
com.google.keystone.user.agent
Startup items
/System/Library/StartupItems/CUDA/CUDA
/System/Library/StartupItems/CUDA/StartupParameters.plist
   /Library/StartupItems/HP IO/HP IO
   /Library/StartupItems/HP IO/Resources/version.plist
   /Library/StartupItems/HP IO/StartupParameters.plist
/Library/StartupItems/HWNetMgr/HWNetCfg
/Library/StartupItems/HWNetMgr/HWNetMgr
   /Library/StartupItems/HWNetMgr/StartupParameters.plist
/Library/StartupItems/HWPortDetect/HWPortCfg
/Library/StartupItems/HWPortDetect/HWPortDetect
/Library/StartupItems/HWPortDetect/StartupParameters.plist
/Library/StartupItems/OpenAFS/OpenAFS
   /Library/StartupItems/OpenAFS/StartupParameters.plist
/Library/StartupItems/rEFItBlesser/rEFItBlesser
/Library/StartupItems/rEFItBlesser/StartupParameters.plist
/Library/StartupItems/VirtualBox/StartupParameters.plist
/Library/StartupItems/VirtualBox/VirtualBox
App extensions
com.getdropbox.dropbox.garcon
Apps
   /Applications/Dropbox.app
Contents of /etc/hosts (checksum 2520548989)
127.0.0.1    localhost
127.0.0.1    [name removed]-macbook-pro.local.
255.255.255.255    broadcasthost
::1 localhost
fe80::1%lo0    localhost
Contents of /etc/ssh_config (checksum 1281775184)
    Host *
      SendEnv LANG LC_*
   Host *
XAuthLocation /opt/X11/bin/xauth
Contents of /etc/sshd_config (checksum 2518667249)
   SyslogFacility AUTHPRIV
AuthorizedKeysFile    .ssh/authorized_keys
   UsePrivilegeSeparation sandbox        # Default for new installations.
   AcceptEnv LANG LC_*
Subsystem    sftp    /usr/libexec/sftp-server
   XAuthLocation /opt/X11/bin/xauth
Contents of /Library/LaunchAgents/com.mozy.status.plist (checksum 976541881)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
<key>Label</key>
<string>com.mozy.status</string>
<key>RunAtLoad</key>
<true/>
<key>KeepAlive</key>
<true/>
<key>ProgramArguments</key>
<array>
<string>/Library/PreferencePanes/MozyHome.prefPane/Contents/Resources/MozyHome Status.app/Contents/MacOS/MozyHome Status</string>
</array>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
   </dict>
   </plist>
Contents of /Library/LaunchAgents/com.nvidia.CUDASoftwareUpdate.plist (checksum 572360244)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
<key>EnvironmentVariables</key>
<dict>
<key>COM_NVIDIA_CUDAPREF_FROM_LAUNCH_AGENT</key>
<string>TRUE</string>
</dict>
<key>Label</key>
<string>com.nvidia.CUDASoftwareUpdate</string>
<key>LimitLoadToSessionType</key>
<array>
<string>Aqua</string>
</array>
<key>Program</key>
<string>/usr/bin/open</string>
<key>ProgramArguments</key>
<array>
<string>open</string>
<string>file:///Library/PreferencePanes/CUDA%20Preferences.prefPane</string>
</array>
<key>RunAtLoad</key>
<false/>
   </dict>
   ...and 1 more line(s)
Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist (checksum 2403555562)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
<key>Label</key>
<string>com.oracle.java.Java-Updater</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
<string>-bgcheck</string>
</array>
<key>StandardErrorPath</key>
<string>/dev/null</string>
<key>StandardOutPath</key>
<string>/dev/null</string>
<key>StartCalendarInterval</key>
<dict>
<key>Hour</key>
<integer>23</integer>
<key>Minute</key>
<integer>50</integer>
<key>Weekday</key>
<integer>3</integer>
</dict>
   </dict>
   ...and 1 more line(s)
Contents of /Library/LaunchAgents/org.macosforge.xquartz.startx.plist (checksum 2451978492)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
<key>Label</key>
<string>org.macosforge.xquartz.startx</string>
<key>ProgramArguments</key>
<array>
<string>/opt/X11/lib/X11/xinit/launchd_startx</string>
<string>/opt/X11/bin/startx</string>
<string>--</string>
<string>/opt/X11/bin/Xquartz</string>
</array>
<key>Sockets</key>
<dict>
<key>org.macosforge.xquartz:0</key>
<dict>
<key>SecureSocketWithKey</key>
<string>DISPLAY</string>
</dict>
</dict>
<key>ServiceIPC</key>
<true/>
<key>EnableTransactions</key>
<true/>
   ...and 2 more line(s)
Contents of /Library/LaunchDaemons/com.adobe.versioncueCS4.plist (checksum 1565429098)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
<key>GroupName</key>
<string>wheel</string>
<key>Label</key>
<string>com.adobe.versioncueCS4</string>
<key>OnDemand</key>
<true/>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/Adobe/Adobe Version Cue CS4/Server/bin/VersionCueCS4d</string>
</array>
<key>RunAtLoad</key>
<false/>
<key>ServiceDescription</key>
<string>Adobe Version Cue CS4</string>
<key>UserName</key>
<string>root</string>
   </dict>
   </plist>
Contents of /Library/LaunchDaemons/com.bombich.ccchelper.plist (checksum 801575064)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
<key>Label</key>
<string>com.bombich.ccchelper</string>
<key>MachServices</key>
<dict>
<key>com.bombich.ccchelper</key>
<true/>
</dict>
<key>ProgramArguments</key>
<array>
<string>/Library/PrivilegedHelperTools/com.bombich.ccchelper</string>
</array>
<key>RunAtLoad</key>
<true/>
   </dict>
   </plist>
Contents of /Library/LaunchDaemons/com.cloudpath.maccmd.plist (checksum 810825832)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.cloudpath.maccmd</string>
<key>OnDemand</key>
<true/>
<key>ProgramArguments</key>
<array>
<string>/Library/PrivilegedHelperTools/com.cloudpath.maccmd</string>
</array>
<key>ServiceIPC</key>
<true/>
<key>Sockets</key>
<dict>
<key>MasterSocket</key>
<dict>
<key>SockFamily</key>
<string>Unix</string>
<key>SockPathMode</key>
<integer>438</integer>
<key>SockPathName</key>
   ...and 7 more line(s)
Contents of /Library/LaunchDaemons/com.mozy.backup.plist (checksum 35683335)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
<key>Label</key>
<string>com.mozy.backup</string>
<key>OnDemand</key>
<false/>
<key>RunAtLoad</key>
<true/>
<key>Nice</key>
<integer>10</integer>
<key>ProgramArguments</key>
<array>
<string>/Library/PreferencePanes/MozyHome.prefPane/Contents/Resources/MozyHomeB ackup</string>
</array>
<key>ServiceIPC</key>
<false/>
<key>UserName</key>
<string>root</string>
<key>GroupName</key>
<string>wheel</string>
<key>SoftResourceLimits</key>
<dict>
<key>NumberOfFiles</key>
   ...and 9 more line(s)
Contents of /Library/LaunchDaemons/net.cloudpath.HelperTool.plist (checksum 1144074417)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
<key>Label</key>
<string>net.cloudpath.HelperTool</string>
<key>MachServices</key>
<dict>
<key>net.cloudpath.HelperTool</key>
<true/>
</dict>
<key>ProgramArguments</key>
<array>
<string>/Library/PrivilegedHelperTools/net.cloudpath.HelperTool</string>
</array>
   </dict>
   </plist>
Contents of /Library/LaunchDaemons/org.macosforge.xquartz.privileged_startx.plist (checksum 2883943871)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
<key>Label</key>
<string>org.macosforge.xquartz.privileged_startx</string>
<key>ProgramArguments</key>
<array>
<string>/opt/X11/lib/X11/xinit/privileged_startx</string>
<string>-d</string>
<string>/opt/X11/lib/X11/xinit/privileged_startx.d</string>
</array>
<key>MachServices</key>
<dict>
<key>org.macosforge.xquartz.privileged_startx</key>
<true/>
</dict>
<key>TimeOut</key>
<integer>120</integer>
<key>EnableTransactions</key>
<true/>
   </dict>
   </plist>
Contents of Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist (checksum 4071182229)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
    <dict>
<key>Label</key>
<string>com.adobe.AAM.Scheduler-1.0</string>
<key>Program</key>
<string>/Library/Application Support/Adobe/OOBE/PDApp/UWA/UpdaterStartupUtility</string>
<key>ProgramArguments</key>
     <array>
<string>/Library/Application Support/Adobe/OOBE/PDApp/UWA/UpdaterStartupUtility</string>
<string>-mode=scheduled</string>
     </array>

Hello Linc et al.,
I have been having Yosemite problems similar to those discussed elsewhere (e.g. iMac 27" late 2013 and Yosemite) (albeit with 10.10.1, Mid-2010 MacBook Pro): can't enter Time Machine, although it seems to be backing up; programs including Illustrator, EndNote, and Boinc don't start, or only after an hour or two (others, including Microsoft Office, seem okay). They will start normally in safe mode, but not for a newly created user. Many permission repairs carried out (seems okay except for a couple recurring printer-related messages), disk is okay, PRAM and SMC reset. Spent some time with various tech support, so most of these have been tried several times.
The solution here com.apple.xpc.launchd & com.apple.mdworker.bundles pollute logs with errors worked through one restart - there were two mystery uids, owning many files - but not through a second.
I have followed the permission repair procedure from another post (discussions.apple.com/message/27015992#27015992); the initial return was 639, and now it is 0. Restarted since then, nothing appeared to change.
Below is what I get from the test suggested in the first thread mentioned, I hope there is something informative here! I'll study it myself, but don't know what might or might not matter.
Thanks,
Barbara
Start time: 11:29:32 12/05/14
Model Identifier: MacBookPro6,2
System Version: OS X 10.10.1 (14B25)
Kernel Version: Darwin 14.0.0
Time since boot: 29 minutes
SATA
   HGST HTS541515A9E630
Diagnostic reports
   2014-12-05 mdworker32 crash x8
   2014-12-05 mdworker crash x14
   2014-12-05 plugin-container crash x2
   2014-12-05 xfig crash
Log
   Dec 5 11:14:35 com.adobe.illustrator.43768: Service exited due to signal: Terminated: 15
   Dec 5 11:14:38 WARNING: The Gestalt selector gestaltSystemVersion is returning 10.9.1 instead of 10.10.1. Use NSProcessInfo's operatingSystemVersion property to get correct system version number.
Call location:
   Dec 5 11:15:21 com.apple.quicklook: Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.quicklook
   Dec 5 11:16:39 en1: 802.11d country code set to 'US'.
   Dec 5 11:16:39 en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
   Dec 5 11:18:25 com.apple.imfoundation.IMRemoteURLConnectionAgent: The _DirtyJetsamMemoryLimit key is not available on this platform.
   Dec 5 11:18:39 com.apple.imfoundation.IMRemoteURLConnectionAgent: The _DirtyJetsamMemoryLimit key is not available on this platform.
   Dec 5 11:18:41 com.apple.imfoundation.IMRemoteURLConnectionAgent: The _DirtyJetsamMemoryLimit key is not available on this platform.
   Dec 5 11:18:47 com.apple.imfoundation.IMRemoteURLConnectionAgent: The _DirtyJetsamMemoryLimit key is not available on this platform.
   Dec 5 11:18:51 com.apple.imfoundation.IMRemoteURLConnectionAgent: The _DirtyJetsamMemoryLimit key is not available on this platform.
   Dec 5 11:18:58 com.apple.imfoundation.IMRemoteURLConnectionAgent: The _DirtyJetsamMemoryLimit key is not available on this platform.
   Dec 5 11:19:04 Recieved EWS error: Error Domain=MFEWSErrorDomain Code=117 "Id is malformed." UserInfo=0x608000e6b4c0 {NSLocalizedDescription=Id is malformed.}
   Dec 5 11:19:04 Recieved EWS error: Error Domain=MFEWSErrorDomain Code=117 "Id is malformed." UserInfo=0x608000c6ba00 {NSLocalizedDescription=Id is malformed.}
   Dec 5 11:19:11 BUG in libdispatch client: dispatch_mig_server: mach_msg() failed (ipc/send) invalid memory - 0x1000000c
   Dec 5 11:19:11 CoreText CopyFontsForRequest received mig IPC error (FFFFFFFFFFFFFECC) from font server
   Dec 5 11:19:11 CoreText CopyFontsForRequest received mig IPC error (FFFFFFFFFFFFFECC) from font server
   Dec 5 11:22:58 Error: execSQLStatement:onConnection:toCompletionWithRetry - SQL=COMMIT;, error-code=1, error-message=cannot commit - no transaction is active
   Dec 5 11:23:09 Error: execSQLStatement:onConnection:toCompletionWithRetry - SQL=COMMIT;, error-code=1, error-message=cannot commit - no transaction is active
   Dec 5 11:26:00 [com.apple.calendar.store.log.persistent.operation] [CalOperationQueue (x-coredata://UUID/ExchangePrincipal/p3): <CalExchangeSyncAccountOperation: 0x7f92fbe96830> failed with error Error Domain=NSURLErrorDomain Code=-1003 "A server with the specified hostname could not be found." UserInfo=0x7f92fe1cbfa0 {NSUnderlyingError=0x7f92fe3021f0 "A server with the specified hostname could not be found.", NSErrorFailingURLStringKey=https://EMAIL/ews/exchange.asmx, NSErrorFailingURLKey=https://EMAIL/ews/exchange.asmx, _kCFStreamErrorDomainKey=12, _kCFStreamErrorCodeKey=8, NSLocalizedDescription=A server with the specified hostname could not be found.}.]
   Dec 5 11:26:05 process WindowServer[150] caught causing excessive wakeups. Observed wakeups rate (per sec): 3474; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 120600
   Dec 5 11:26:05 com.apple.ReportCrash.Root: Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.ReportCrash.DirectoryService
   Dec 5 11:26:06 Error loading dyld shared cache uuid UUID: 0x8
   Dec 5 11:29:38 process smcDiagnose[687] caught causing excessive wakeups. Observed wakeups rate (per sec): 49533; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 48870
   Dec 5 11:29:38 com.apple.ReportCrash.Root: Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.ReportCrash.DirectoryService
kexts
org.virtualbox.kext.VBoxDrv (4.1.18)
org.virtualbox.kext.VBoxUSB (4.1.18)
Daemons
com.oracle.java.JavaUpdateHelper
   com.adobe.versioncueCS4
com.apple.installer.osmessagetracing
com.oracle.java.Helper-Tool
   com.cloudpath.maccmd
   com.mozy.backup
   net.cloudpath.HelperTool
   com.adobe.fpsaud
   com.bombich.ccchelper
org.macosforge.xquartz.privileged_startx
Agents
com.adobe.CS4ServiceManager
uk.co.markallan.clamxav.freshclam
com.adobe.AdobeCreativeCloud
uk.co.markallan.clamxav.clamscan
   com.mozy.status
org.macosforge.xquartz.startx
   com.hp.printerAgent
com.oracle.java.Java-Updater
com.citrixonline.GoToMeeting.G2MUpdate
com.nvidia.CUDASoftwareUpdate
   com.adobe.ARM.UUID
com.google.keystone.user.agent
Startup items
/System/Library/StartupItems/CUDA/CUDA
/System/Library/StartupItems/CUDA/StartupParameters.plist
   /Library/StartupItems/HP IO/HP IO
   /Library/StartupItems/HP IO/Resources/version.plist
   /Library/StartupItems/HP IO/StartupParameters.plist
/Library/StartupItems/HWNetMgr/HWNetCfg
/Library/StartupItems/HWNetMgr/HWNetMgr
   /Library/StartupItems/HWNetMgr/StartupParameters.plist
/Library/StartupItems/HWPortDetect/HWPortCfg
/Library/StartupItems/HWPortDetect/HWPortDetect
/Library/StartupItems/HWPortDetect/StartupParameters.plist
/Library/StartupItems/OpenAFS/OpenAFS
   /Library/StartupItems/OpenAFS/StartupParameters.plist
/Library/StartupItems/rEFItBlesser/rEFItBlesser
/Library/StartupItems/rEFItBlesser/StartupParameters.plist
/Library/StartupItems/VirtualBox/StartupParameters.plist
/Library/StartupItems/VirtualBox/VirtualBox
App extensions
com.getdropbox.dropbox.garcon
Apps
   /Applications/Dropbox.app
Contents of /etc/hosts (checksum 2520548989)
127.0.0.1    localhost
127.0.0.1    [name removed]-macbook-pro.local.
255.255.255.255    broadcasthost
::1 localhost
fe80::1%lo0    localhost
Contents of /etc/ssh_config (checksum 1281775184)
    Host *
      SendEnv LANG LC_*
   Host *
XAuthLocation /opt/X11/bin/xauth
Contents of /etc/sshd_config (checksum 2518667249)
   SyslogFacility AUTHPRIV
AuthorizedKeysFile    .ssh/authorized_keys
   UsePrivilegeSeparation sandbox        # Default for new installations.
   AcceptEnv LANG LC_*
Subsystem    sftp    /usr/libexec/sftp-server
   XAuthLocation /opt/X11/bin/xauth
Contents of /Library/LaunchAgents/com.mozy.status.plist (checksum 976541881)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
<key>Label</key>
<string>com.mozy.status</string>
<key>RunAtLoad</key>
<true/>
<key>KeepAlive</key>
<true/>
<key>ProgramArguments</key>
<array>
<string>/Library/PreferencePanes/MozyHome.prefPane/Contents/Resources/MozyHome Status.app/Contents/MacOS/MozyHome Status</string>
</array>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
   </dict>
   </plist>
Contents of /Library/LaunchAgents/com.nvidia.CUDASoftwareUpdate.plist (checksum 572360244)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
<key>EnvironmentVariables</key>
<dict>
<key>COM_NVIDIA_CUDAPREF_FROM_LAUNCH_AGENT</key>
<string>TRUE</string>
</dict>
<key>Label</key>
<string>com.nvidia.CUDASoftwareUpdate</string>
<key>LimitLoadToSessionType</key>
<array>
<string>Aqua</string>
</array>
<key>Program</key>
<string>/usr/bin/open</string>
<key>ProgramArguments</key>
<array>
<string>open</string>
<string>file:///Library/PreferencePanes/CUDA%20Preferences.prefPane</string>
</array>
<key>RunAtLoad</key>
<false/>
   </dict>
   ...and 1 more line(s)
Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist (checksum 2403555562)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
<key>Label</key>
<string>com.oracle.java.Java-Updater</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
<string>-bgcheck</string>
</array>
<key>StandardErrorPath</key>
<string>/dev/null</string>
<key>StandardOutPath</key>
<string>/dev/null</string>
<key>StartCalendarInterval</key>
<dict>
<key>Hour</key>
<integer>23</integer>
<key>Minute</key>
<integer>50</integer>
<key>Weekday</key>
<integer>3</integer>
</dict>
   </dict>
   ...and 1 more line(s)
Contents of /Library/LaunchAgents/org.macosforge.xquartz.startx.plist (checksum 2451978492)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
<key>Label</key>
<string>org.macosforge.xquartz.startx</string>
<key>ProgramArguments</key>
<array>
<string>/opt/X11/lib/X11/xinit/launchd_startx</string>
<string>/opt/X11/bin/startx</string>
<string>--</string>
<string>/opt/X11/bin/Xquartz</string>
</array>
<key>Sockets</key>
<dict>
<key>org.macosforge.xquartz:0</key>
<dict>
<key>SecureSocketWithKey</key>
<string>DISPLAY</string>
</dict>
</dict>
<key>ServiceIPC</key>
<true/>
<key>EnableTransactions</key>
<true/>
   ...and 2 more line(s)
Contents of /Library/LaunchDaemons/com.adobe.versioncueCS4.plist (checksum 1565429098)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
<key>GroupName</key>
<string>wheel</string>
<key>Label</key>
<string>com.adobe.versioncueCS4</string>
<key>OnDemand</key>
<true/>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/Adobe/Adobe Version Cue CS4/Server/bin/VersionCueCS4d</string>
</array>
<key>RunAtLoad</key>
<false/>
<key>ServiceDescription</key>
<string>Adobe Version Cue CS4</string>
<key>UserName</key>
<string>root</string>
   </dict>
   </plist>
Contents of /Library/LaunchDaemons/com.bombich.ccchelper.plist (checksum 801575064)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
<key>Label</key>
<string>com.bombich.ccchelper</string>
<key>MachServices</key>
<dict>
<key>com.bombich.ccchelper</key>
<true/>
</dict>
<key>ProgramArguments</key>
<array>
<string>/Library/PrivilegedHelperTools/com.bombich.ccchelper</string>
</array>
<key>RunAtLoad</key>
<true/>
   </dict>
   </plist>
Contents of /Library/LaunchDaemons/com.cloudpath.maccmd.plist (checksum 810825832)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.cloudpath.maccmd</string>
<key>OnDemand</key>
<true/>
<key>ProgramArguments</key>
<array>
<string>/Library/PrivilegedHelperTools/com.cloudpath.maccmd</string>
</array>
<key>ServiceIPC</key>
<true/>
<key>Sockets</key>
<dict>
<key>MasterSocket</key>
<dict>
<key>SockFamily</key>
<string>Unix</string>
<key>SockPathMode</key>
<integer>438</integer>
<key>SockPathName</key>
   ...and 7 more line(s)
Contents of /Library/LaunchDaemons/com.mozy.backup.plist (checksum 35683335)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
<key>Label</key>
<string>com.mozy.backup</string>
<key>OnDemand</key>
<false/>
<key>RunAtLoad</key>
<true/>
<key>Nice</key>
<integer>10</integer>
<key>ProgramArguments</key>
<array>
<string>/Library/PreferencePanes/MozyHome.prefPane/Contents/Resources/MozyHomeB ackup</string>
</array>
<key>ServiceIPC</key>
<false/>
<key>UserName</key>
<string>root</string>
<key>GroupName</key>
<string>wheel</string>
<key>SoftResourceLimits</key>
<dict>
<key>NumberOfFiles</key>
   ...and 9 more line(s)
Contents of /Library/LaunchDaemons/net.cloudpath.HelperTool.plist (checksum 1144074417)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
<key>Label</key>
<string>net.cloudpath.HelperTool</string>
<key>MachServices</key>
<dict>
<key>net.cloudpath.HelperTool</key>
<true/>
</dict>
<key>ProgramArguments</key>
<array>
<string>/Library/PrivilegedHelperTools/net.cloudpath.HelperTool</string>
</array>
   </dict>
   </plist>
Contents of /Library/LaunchDaemons/org.macosforge.xquartz.privileged_startx.plist (checksum 2883943871)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
<key>Label</key>
<string>org.macosforge.xquartz.privileged_startx</string>
<key>ProgramArguments</key>
<array>
<string>/opt/X11/lib/X11/xinit/privileged_startx</string>
<string>-d</string>
<string>/opt/X11/lib/X11/xinit/privileged_startx.d</string>
</array>
<key>MachServices</key>
<dict>
<key>org.macosforge.xquartz.privileged_startx</key>
<true/>
</dict>
<key>TimeOut</key>
<integer>120</integer>
<key>EnableTransactions</key>
<true/>
   </dict>
   </plist>
Contents of Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist (checksum 4071182229)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
    <dict>
<key>Label</key>
<string>com.adobe.AAM.Scheduler-1.0</string>
<key>Program</key>
<string>/Library/Application Support/Adobe/OOBE/PDApp/UWA/UpdaterStartupUtility</string>
<key>ProgramArguments</key>
     <array>
<string>/Library/Application Support/Adobe/OOBE/PDApp/UWA/UpdaterStartupUtility</string>
<string>-mode=scheduled</string>
     </array>

KT6 Delta won't boot after clearing the BIOS

I have just put together the machine as per my signature and run into a few problems. The XP 2800 mobile is not recognised as such but as a XP1800 when I set the FSB to 133. Am I right in saying this CPU should run at 1.65 volts as it seems to wants to run at 1.75. I changed the V Core to 1.65 and it boots ok but when I tried it at 1.6 it did not want to boot, ie no video output. I no longer get the single BIOS bleep and the monitor stays on standby. This has happened before and I got it running again by clearing the CMOS and reseating the RAM but this time I have done the same and it won't boot. Is there anything else I should be doing please. Many thanks.
Having looked at the Socket A sticky I see that my diagnostic D bracket is showing 1,2 and 3 showing red and four not on at all which would seem to point at the graphics as being the problem.

Hello!
Voltages should be set to "CPU default" or similar. Your processor comes in different versions, try setting to 166 instead of 133. Always when changing processor one should clear CMOS, by powering off, unplugging power cable, and then move JBAT jumper for a short time, a minute or so.

Can´t enter bios setup/system does not boot

Hi,
I got a problem with my new KT6 Delta MS-6590 board.
Sometimes after a prog is crashed and its better to restart windows, my System doesn´t boot anymore. It hangs after searching RAID-Disks. The Broadcom Dialog does not appear and the System stands. When I try to reset and would like to get into the bios setup I can´t enter it. The Delete Key do not work. After clearing cmos and going on with default values the systems works correctly until the next crash.
The bracket says "Boot attempt"
Whats the problem please help ?(

Read "KT6-LSR and installing Windows on SATA" post (At this moment is the last in this page). There you'll find many posts about Raid problems. 8)

Aspire V3-551 Won't boot, can't enter BIOS

Similar Messages

Maybe you are looking for