Aspiring professional; focus on newborns and children; lense under $1000? (t4i rebel)

I'm a hopefully hobbies looking to go pro by specializing in newborns and children. I do my work inside and outdoors so I will need a lense that plays well with low light, artificial light & natural llight. Recommendation for the best newborn lens under $1000?

You need a fast lens and a macro for newborns.  I primarily used my 100mm macro with my newborns, but I use my own lighting so I don't need a really wide aperture.  I do pull out my 50mm 1.4 and 85mm 1.4 for natural light or really small depth of field, but it's more rare.  The 24-105 mentioned above is a great lens, but I've never used it for newborns or children in a studio setting.   I don't normally need the flexibility of a zoom in the studio so I'd prefer the sharpness of a prime and the speed if I need it.  But mostly I want something that can focus close to the subject in-case I want to get in tight when I see an opportunity.  There's nothing worse than missing a shot because your lens can't focus close up.  With children you won't need the macro and will want something wider (50mm is a good portrait length) for your crop sensor camera, unless you have a ton of room in your studio.

Similar Messages

  • I have tried to purchase Adobe Acrobat Professional XI this morning and payment (AED 1983.53) has been taken, I received a message stating there was/is a problem processing my order and that I should contact your customer service team in UAE.  Having trie

    I have tried to purchase Adobe Acrobat Professional XI this morning and payment (AED 1983.53) has been taken, I received a message stating there was/is a problem processing my order and that I should contact your customer service team in UAE.  Having tried this, I was met with a recorded message, in Arabic, and no options to speak to anyone.  I have found this process extremely frustrating and poor on your behalf.  Not providing any options to speak to an Adobe representative is equally annoying.  Please get back to me ASAP, as I need to use the product immediately.

    CS2 is very old and reached its "end of life" a while back.  So probably won't run on modern operating systems.  If you can still run it, you'll need to uninstall what you have and re-install with the download link below to activate it.
    Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
    Nancy O.

  • How do I get spouses and children on to printed labels and envelops?

    I store spouses and children in the fields provided for these names. When I go to print labels, Address Book puts the primary name and one randomly selected child name on the first line. So if the person is Jane Smith, I have her spouse listed as John, and two kids listed as Jake and Janice, the label will read.
    Jane Smith and Janice
    142 Main St.
    Nowhere, NH
    Can I get the spouse name and the other kids to show up? How?
    +Also, any tips on dealing with couples with two last names? That's more of a data entry question, but if anyone has ways this works for labels but also for logical address book and iPhone look up.+

    Turn iCloud contact syncing off and choose keep when prompted.

  • HT201365 Find My iPhone no longer works for me to know where my wife and children's phones are. In earlier IOS versions, I added my iCloud account to their devices and only had Find My iPhone function active.  Can't do that now; what do I do?

    Before IOS 7, I created an account on my wife and childrens iPhones, iPads and iPod devices with my iCloud account, only having the Find My iPhone function turned on.  It worked great.  Now, with IOS 7, it is not working and I don't have the option to have the Find My iPhone function on my iCloud account on their devices.  Does anyone know how to make this work?  My family loses their devices frequently and I am concerned I won'e be able to help them find them.  Thanks!!

    They only need their main iCloud account to have Find My iPhone on. If your account is not their main account it won't work. Only one account can enable that function on a device. They don't need to have the app on their devices unless you want them to find you.
    If you can see the devices when you log into their accounts on your Find My iPhone app they are being recognized by the app. But as Winston said if they're not turned on, if they are not on a network, cell or wifi, then they will read as offline. This often happens when I look for my wife's phone when she is at work, her wifi system there does not keep the connection active when the device goes to sleep and in some areas of the building there is poor to no cell connection. And sometimes the service just doesn't pick them up for no obvious reason.
    iOS 7 has several annoying glitches right now that hopefully will be resolved soon and this could be one for you. I would try this again by having all the devices in one location , restart all of them, make certain the function is enabled on all of them and that wifi is connected ( if you have a wifi network available ) or that they are connected to a cell network with a strong signal. Then launch the app on your phone and log in with their accounts, their locations should show up.

  • I have a BTHub4 - My iMac, iPhone, and children's iPads all connect to the internet no problem. I cannot get my 2 MacBook Pros or my partners MacBook Air to connect. Have tried diagnostics - says to change DNS but  it is correct.

    I have a BTHub4 - My iMac, iPhone, and children's iPads all connect to the internet no problem. I cannot get my 2 MacBook Pros or my partners MacBook Air to connect. Have tried diagnostics - says to change DNS but  it is correct. I have re-set both router and all laptops - no joy. They can all see the network but cannot connect.

    This is extraordinary. I have moved the router and also tried resetting it to its factory strings.  We have had this router for over a year and all our devices have always worked. Now all four laptops will not connect to the internet. Only one oMac and our phones and iPad.
    I have had far more devices running at once before but now all laptops are timing out on connection. Some say this iIP address is already being used but if I manually set to a slightly different IP address it does not help, noir if I manually set to the correct IP address. Why would all our laptops (four) suddenly be unable to connect?

  • Camera focus is locked and I can't get the autofocus to work.

    Camera focus is locked and I can't the autofocus to work even if I point on the screen as described in the manual.

    Kallestropp-
    One thing you can try is to reset (reboot) your iPad.  Hold both the Home and Sleep buttons for several seconds until the Apple logo appears.  Ignore the "Slide to power off" arrow.  The iPad will restart after a couple of minutes.  Resetting this way will not hurt anything, and sometimes clears up mysterious problems.
    If that does not help, your iPad may be defective.  If it is in warranty, show it to an Apple Store Genius.  If the Genius can not fix it, you may get a replacement iPad on the spot.
    If your warranty has expired, or there is no Apple Store near you, look for an Apple Authorized Repair Center.  There may be one in your city.  <Apple Authorized Repair Centers>
    Fred

  • How to create Parent and Children is a tree table / trigger sequence number

    How to create Parent and Children is a tree table when the primary key of the parent is generated via a trigger and a sequence number in the database?
    My problem is when I create a parent and then right away a children. The parent still not have a primary key until the transaction get to the database. I get a error when trying the create the children, cannot insert null in the foreign key field of the children.
    Please help.
    Stephane

    You should have the parent key be marked as a DBSequence type.
    Then you should have the association between the master and detail defined as composite association to make sure that the posting order to the database is correct.
    http://download.oracle.com/docs/cd/E24382_01/web.1112/e16182/bcentities.htm#BABFECDJ

  • Sharing resources between parent FDO and children PDO

    Hello,
    I 'm developping a WDM driver for a FPGA that embeds several uarts and a CAN controler in one PCI slot.
    I use the DDK Toaster sample as a basis.
    Has someone already shared resources between  parent FDO and children PDO ?
    One way will be to export a direct-call interface between tha parent and the children. Is there something better to get the interrupt trigger in the child and the memory as a direct access ?
    Thanks
    Marco

    Hi Doron,
    here is the full debug output................
    ADDITIONAL_DEBUG_TEXT:  
    You can run '.symfix; .reload' to try to fix the symbol path and load symbols.
    MODULE_NAME: Nitin
    FAULTING_MODULE: fffff8000324a000 nt
    DEBUG_FLR_IMAGE_TIMESTAMP:  549ced55
    EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
    FAULTING_IP:
    +501cfc0
    00000000`00000000 ??              ???
    EXCEPTION_RECORD:  fffff88003b9a9c8 -- (.exr 0xfffff88003b9a9c8)
    ExceptionAddress: 0000000000000000
       ExceptionCode: c0000005 (Access violation)
      ExceptionFlags: 00000000
    NumberParameters: 2
       Parameter[0]: 0000000000000008
       Parameter[1]: 0000000000000000
    Attempt to execute non-executable address 0000000000000000
    CONTEXT:  fffff88003b9a220 -- (.cxr 0xfffff88003b9a220;r)
    rax=fffffa8022124c40 rbx=0000000000000000 rcx=0000000000000000
    rdx=fffff88003b9ac58 rsi=fffff88000fc60c0 rdi=fffff88003b9acf8
    rip=0000000000000000 rsp=fffff88003b9ac08 rbp=000000000000000c
     r8=0000000000000065  r9=0000000000000003 r10=4679726575516f64
    r11=000000000000000c r12=fffff88000fc92c0 r13=0000000000000312
    r14=0000000000000000 r15=0000000000000000
    iopl=0         nv up ei ng nz na pe nc
    cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010282
    00000000`00000000 ??              ???
    Last set context:
    rax=fffffa8022124c40 rbx=0000000000000000 rcx=0000000000000000
    rdx=fffff88003b9ac58 rsi=fffff88000fc60c0 rdi=fffff88003b9acf8
    rip=0000000000000000 rsp=fffff88003b9ac08 rbp=000000000000000c
     r8=0000000000000065  r9=0000000000000003 r10=4679726575516f64
    r11=000000000000000c r12=fffff88000fc92c0 r13=0000000000000312
    r14=0000000000000000 r15=0000000000000000
    iopl=0         nv up ei ng nz na pe nc
    cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010282
    00000000`00000000 ??              ???
    Resetting default scope
    CUSTOMER_CRASH_COUNT:  1
    DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
    BUGCHECK_STR:  0x7E
    CURRENT_IRQL:  0
    ANALYSIS_VERSION: 6.3.9600.17029 (debuggers(dbg).140219-1702) amd64fre
    LAST_CONTROL_TRANSFER:  from fffff8800b9eb091 to 0000000000000000
    STACK_TEXT:  
    fffff880`03b9ac08 fffff880`0b9eb091 : fffff880`0b9ec9a0 00000000`00000001 00000000`00000000 fffff880`009cf180 : 0x0
    fffff880`03b9ac10 fffff880`0b9ec9a0 : 00000000`00000001 00000000`00000000 fffff880`009cf180 00000000`00000001 : Nitin+0x4091
    fffff880`03b9ac18 00000000`00000001 : 00000000`00000000 fffff880`009cf180 00000000`00000001 00000000`00000000 : Nitin+0x59a0
    fffff880`03b9ac20 00000000`00000000 : fffff880`009cf180 00000000`00000001 00000000`00000000 00000000`03060001 : 0x1
    FOLLOWUP_IP:
    Nitin+4091
    fffff880`0b9eb091 ??              ???
    SYMBOL_STACK_INDEX:  1
    SYMBOL_NAME:  Nitin+4091
    FOLLOWUP_NAME:  MachineOwner
    IMAGE_NAME:  Nitin.sys
    STACK_COMMAND:  .cxr 0xfffff88003b9a220 ; kb
    BUCKET_ID:  WRONG_SYMBOLS
    FAILURE_BUCKET_ID:  WRONG_SYMBOLS
    ANALYSIS_SOURCE:  KM
    FAILURE_ID_HASH_STRING:  km:wrong_symbols
    FAILURE_ID_HASH:  {70b057e8-2462-896f-28e7-ac72d4d365f8}
    Followup: MachineOwner

  • Like most professional photographers, I shoot and edit in RAW rather then JPEG. Is Photos app going to allow me to use the RAW format?

    Like most professional photographers, I shoot and edit in RAW rather then JPEG. Is the Photos app going to allow me to use the RAW format?
    iMac with 3TB drive and 32 GIG of RAM. Three DROBO storage systems for data and backup.

    Try the alternatives, or wait for reports by the users who already migrated. For example, Capture One is more similar to Aperture than Lightroom:
    http://www.cnet.com/news/phase-ones-updated-image-editor-throws-apple-aperture-u sers-a-lifeline/
    http://www.photographybay.com/2014/10/01/capture-one-pro-8-unveiled-features-app le-aperture-migrate-option/
    I'll keep my main libraries in Aperture, as long as it compatible with the operating system.  If that no longer works, I'll start a new main library with digikam. If there is no native Mac application, that offers what I need for my workflow, I'll switch back to open source software.

  • How to create a graph representing a big tree(parents and children are know

    How to create a graph representing a big tree(parents and children are known)?
    Thank you so much!
    Also, I need to write the graph into a jpg/gif file or display the graph in the web browser.
    I got a code from JGraph and can create the graph I want, although unextendable. However, JGraph define the graph as class Gscene instead of Img or BufferedImg or RenderedImg. Therefore, I couldn't use ImageIO.write(image, ext, file) to write the graph into a jpg file.

    aiGrace wrote:
    How to create a graph representing a big tree(parents and children are known)?Hierarchical data structures are covered here all the time. Please search before you post. This topic has been covered over and over.
    Thank you so much!
    Also, I need to write the graph into a jpg/gif file or display the graph in the web browser. I got a code from JGraph and can create the graph I want, although unextendable. However, JGraph define the graph as class Gscene instead of Img or BufferedImg or RenderedImg. Therefore, I couldn't use ImageIO.write(image, ext, file) to write the graph into a jpg file.Did you read the JGraph API? I'm guessing it exposes a method to get the image data somehow.

  • Next proposal: Iglasses and Icontact-lenses. When it will be possible?

    Next proposal: Iglasses and Icontact-lenses. When it will be possible?
    Can someone tell it?

    Google Glass has been available for some time. It may still be a little to controversial for Apple though.

  • After upgrading to Mountain Lion I am not able to access "security and privacy" button under "system preferences". I like to activate "find my mac" but cannot access privacy setting after upgrade. Kindly advice.

    After upgrading to Mountain Lion I am not able to access "security and privacy" button under "system preferences". I like to activate "find my mac" but cannot access privacy setting after upgrade. Kindly advice.

  • I have 2 apple id's with different apps and data saved under each.  It's very annoying so now I want to create a new id with my primary email address I use now.  If I do that is there any way to transfer all my saved apps and app data like game saves etc?

    I have 2 apple id's with different apps and data saved under each.  It's very annoying so now I want to create a new id with my primary email address I use now.  If I do that is there any way to transfer all my saved apps and app data like game saves etc so I don't lose all of that information and can easily switch to a singular apple id?

    Apple does not transfer content bought with one Apple ID to another Apple ID. Apple will not merge two Apple IDs.
    If most of your content was bought with the Yahoo! Apple ID but you now want the Gmail address for your Apple ID, the trick will be to change the address used for the Yahoo ID with the Gmail address. However, to do that you must first free the Gmail address from that other Apple ID. Use the instructions from Apple to substitute another address that is not used as an Apple ID for your Gmail address in the Apple ID with the Gmail address. Then, when the Gmail address is no longer used in an Apple ID, you can use the same instructions to substitute the Gmail address for the Yahoo address in the Apple ID with the Yahoo address.
    Changing the email address you use for your Apple ID -
    http://support.apple.com/kb/HT5621

  • My wife had an iPad for a year and synced to our computer with no problem.  I recently received an ipad2 and when I tried to sync using separate apple and iTunes passwords, under her computer user name, it appears I over-road her account and synced all he

    My wife had an iPad for a year and synced to our computer with no problem.  I recently received an ipad2 and when I tried to sync using separate apple and iTunes passwords, under her computer user name, it appears I over-road her account and synced all her apps with my apps on my iPad.  I then set myself up as a new user on our computer and tried to sync.  I now get the error that my iPad is synced to another library.  How can I start over without erasing all my data on the iPad?

    Go back to her login.  Unless you deliberately erased apps, they should all be there, both yours and hers!  Then, you need to set up each iPad separately.  You will notice that they have separate names for that very purpose.
    There is no problem with multiple Apple IDs on the same iTunes on the same computer except...  Apps are permanently associated with the ID that was originally used to obtain them.  If you choose to update an app from inside iTunes and you're logged into the "wrong" ID, you must log out and back in again.
    On the bright side, you can configure either or both iPads to sync with apps and music and movies, etc. from either or both IDs.  Further, if you choose to update the apps from the iPads themselves, there is no need to log out/in.  The device handles that.  All you need is the correct password.  In my case, I use the same password for both IDs to make things easier.

  • How do I transfer PDF files from PC to IPAD using Itunes 12.1.2.  Previous versions let me drag file in Itunes to Ipad and files appeared under Ibook but can't get it to work in latest 12.1.2 version.

    How do I transfer PDF files from PC (Windows 7) to IPAD using Itunes 12.1.2.  I would like to do files manually rather then auto synch.  Previous versions let me drag file in Itunes to Ipad and files appeared under Ibook and then I could move them to an appropriate collection title.  The interface appears to have changed in the latest ITunes version and I am not sure what the proper procedure is.

    King_Penguin - Thanks it worked perfectly.  I had my pdf files copied into ITunes on my PC but when I clicked on a pdf file to copy it I thought the sidebar would appear with my IPAD name and then I would drag it over.  I didn't realize that I needed to click-and start dragging it towards the left-hand side for the sidebar to appear.  It worked like a charm - THANKYOU!!!

Maybe you are looking for