ASR 1002 current license for LNS router ???

hi i want to ask about ASR 1002 license for LNS router .
i want to know how many pppoe session can handle without any license
i mean wts the current sessions allowed on the current router
and wt other options i have to upgrade this router so that it support more sessions and its prices.
regards

here is my current router :
Gateway-ASR1002#sh inventory
NAME: "Chassis", DESCR: "Cisco ASR1002 Chassis"
PID: ASR1002 , VID: V06, SN: FOX1807GBZW
NAME: "module F0", DESCR: "Cisco ASR1000 Embedded Services Processor, 5Gbps"
PID: ASR1000-ESP5 , VID: V04, SN: JAE18110AU1
NAME: "Power Supply Module 0", DESCR: "Cisco ASR1002 AC Power Supply"
PID: ASR1002-PWR-AC , VID: V03, SN: ART1804U03P
NAME: "Power Supply Module 1", DESCR: "Cisco ASR1002 AC Power Supply"
PID: ASR1002-PWR-AC , VID: V03, SN: ART1804U05H
NAME: "module 0", DESCR: "Cisco ASR1002 SPA Interface Processor 10"
PID: ASR1002-SIP10 , VID: , SN:
NAME: "SPA subslot 0/0", DESCR: "4-port Gigabit Ethernet Shared Port Adapter"
PID: 4XGE-BUILT-IN , VID: , SN:
NAME: "subslot 0/0 transceiver 0", DESCR: "GE T"
PID: SFP-GE-T , VID: , SN: MTC1229019N
NAME: "subslot 0/0 transceiver 1", DESCR: "GE T"
PID: SFP-GE-T , VID: , SN: MTC1231005A
NAME: "subslot 0/0 transceiver 2", DESCR: "GE T"
PID: SFP-GE-T , VID: , SN: MTC1229019M
NAME: "module R0", DESCR: "Cisco ASR1002 Route Processor 1"
PID: ASR1002-RP1 , VID: V06, SN: JAE18110F7G
Gateway-ASR1002#

Similar Messages

How to switch licensed for "ADOBE DESIGN STANDARD" from iMac to Macbook Pro?

I am currently licensed for "ADOBE DESIGN STANDARD" on an iMac. I have a new MacBook Pro and want to use that instead of the iMac. Do i need to get a new license key? or ??
I know i can download an "eval" copy on the laptop, but how do i switch license keys? i'm not even sure i still have the (valid) license key for the iMac...can i request another??

As long as you are staying within the same general platform (PC vs Mac) you do not need to change licensing. You are allowed to have two activated installations with your license, so you should be able to install on the new machine without having to worry about the older one at all (unless you ever want to free up the second activation for yet another machine). As you mentioned, you can download the trial version and use the serial number from your purchase to activate it to full use.
If you registered your software with Adobe, the serial number should be available via your Adobe account online. If you didn't register it then you will at least understand why it pays to do so.
IF you end up needing to resolve any issues with activating the product on the new machine you will need to contact Adobe Support directly. Here are some links to help make contact:
http://www.adobe.com/support/chat/ivrchat.html
http://www.adobe.com/support/download-install/supportinfo/

What is the BB license for ASR1000 act as LNS

I want to apply ASR1004 act as LNS to support 20K PPP session, the following configuration can support it(I suppose 20K session's traffic is 20G.):
Part Number
Product Description
Quantity
ASR1004
Cisco ASR1004 Chassis, Dual P/S
1
ASR1004-PWR-AC
Cisco ASR1004 AC Power Supply
2
Part number depends on required power cable
Power Cable
2
ASR1000-RP2
Cisco ASR1000 Route Processor 2, 8GB DRAM
1
ASR1000-ESP20
Cisco ASR1000 Embedded Services Processor, 20Gbps
1
ASR1000-SIP10
Cisco ASR1000 SPA Interface Processor 10
2
SPA-1X10GE-L-V2
Cisco 1-Port 10GE LAN-PHY Shared Port Adapter
2
XFP-10GLR-OC192SR
Multirate XFP module for 10GBASE-LR and OC192 SR-1
2
SASR1R2-AISK9
Cisco ASR1000 Series RP2 Advanced IP SERVICES
1
FLASR1-BB-RTU
Broadband Right-To-Use with 500 BB Sessions Lic for ASR1000
1
FLASR1-BB-4K
Broadband 4K Sessions Feature License for ASR1000 Series
1
FLASR1-BB-16K
Broadband 4K Sessions Feature License for ASR1000 Series
1
"Part number ASR1006-10G-B16/K9: Supports 16,000 sessions" that should inclde 16K sessions and SASR1R2-AISK9. It also include the FLASR1-BB-RTU?
Please help me, I am waiting it online. I am a small ISP, no cisco sales or tech support.
thank you very much.

Hi Giles,
Thanks for your response but Apple is not stating the payment method for Online Apple Store for Malaysia. I called up Apple Store Malaysia to ask about this and they mentioned that only credit card is available.
I wondering how a company have a credit to provide the payment? Is there other alternative?

ASR 1002 ACL object-group for ZBFW

Hey guys,
Quick question. I just want to know if anyone has experience configuring object-groups for ACLs on the ASR 1002. I am trying to so this on ours to consolidate a large ACL we have. It only works if I specifically use the protocols within the configuration. If I add a service object-group to match my protocols it doesn't match. The same configuration works on a 2811 router.
I have a TAC case open and Cisco is telling me that object-groups are not supported on the ASRs but I have a hard time believing them if the commands clearly exist.
If anyone has experience in this please let me know.
Thanks,
Elton
Sent from Cisco Technical Support iPhone App

Elton,
"Hi Joe,
Support will start in 3.9S (Q1CY2013). Thanks.
Cheers,
/Mani"
From:
Ask The Expert: Introduction to Cisco ASR 1000 Series Aggregation Services Routers

ASR 1002 license

Hello,
we got a new cisco ASR 1002 ,does it require a license to work as BRAS??
Thnx

Yes, it does.
The feature licenses for ASR1K can be viewed at Table 2 on the URL http://www.cisco.com/en/US/prod/collateral/routers/ps9343/product_bulletin_c25-448292.html
You would need a license to enable broadband (FLASR1-BB-RTU) and another license with the appropriate number of sessions.
Cheers

ASR 1002 Router doing multiple VRFs

I have an ASR 1002 router with Three VRFs coming into it. The first 2 VRFs are just terminating on the ASR with L3 sub interfaces. So no big deal with them. The third one is a VRF that needs to terminate on a separate router. The ASR that needs to split out this 3rd VRF is not allowed to have an IP address for it. So it just needs to forward off this as L2 to a separate physical port and then terminates on a different router.
So my question is what is the best way to accomplish this on the ASR? Could I setup a pseudo wire setup or is there an easier way to just split off this as separate VLAN to the other physical interface?

Hi
You could try with bridging. Something like this
Interface bvi 1
no ip address
interface gig0
bridge-gropup 1
interface gig1
bridge-group 1
/Mikael

ASR 1002 Router

Dear Cisco Support,
Want to find out if the cisco ASR 1002 router can work without the esp module installed.
Thanks
Edwin K Phiri

Thanks for taking the time to rate our posts, Edwin. :)

Asr 1002 license options

Hi all,
I'm trying to get clarification with the licensing surrounding the ASR units.
Which features of the ASR 1002 are enforced by PAK file or similar? I'm going to be doing some testing in the Lab with a couple of borrowed units and I just need to know what I'll be able to do.
From my undertanding and upgrade from 5G to 10G would require a PAK file for upgrade and so to would a move from IP Base to enterprise or adv IP services. The remainder of the upgrades (for example enabling broadband services) are honor based.
If someone could confirm this that would be great.
Thanks,
Jonathan

Yes, it does.
The feature licenses for ASR1K can be viewed at Table 2 on the URL http://www.cisco.com/en/US/prod/collateral/routers/ps9343/product_bulletin_c25-448292.html
You would need a license to enable broadband (FLASR1-BB-RTU) and another license with the appropriate number of sessions.
Cheers

Is it possible for me to have CC on two computers at once with my current licensing? I would like to have it on my desktop and my laptop.

Is it possible for me to have CC on two computers at once with my current licensing? I would like to have it on my desktop and my laptop.

Each CC allows you to activate it two times, it can be on the same computer or different.
So you can install &a activate it on two computers but as End user license agreement you can not work on them simultaneously.
http://www.adobe.com/legal/licenses-terms.html
Creative Cloud Help | Creative Cloud / Common Questions
http://helpx.adobe.com/creative-cloud/faq.html
Regards
Rajshree

Contact Center Enhanced License for Cisco 2951 Router

Hi,
I need an urgent help to get the exact part number/details of Contact center enhanced license.
I couldn't find in CCW or any other tool about this license with Cisco 2951 Router (CISCO2951-V/K9).
To run this license on mentioned router, do we need to order it separately or we can take it with router?
Please respond asap.

Hi Andre,
I was just refering the Ordering guide which says
Updating UCSS contract when upgrading Unified CCX licenses
UCSS cannot be upgraded from one category to another (e.g. Standard to Enhanced). If
the customer upgrades within the solution, they need to purchase UCSS for greater or
equal value to cover the new version, then they can request a credit on the unused term
of the original purchase from Customer Service
you can also speak to [email protected] for more details on ESW.
regds,
aman

Need CUBE license for Existing 3945 GW Router ?

Hi
I already have a 3945 Router that have purchased long back
Now we are planning for a SIP TRUNK to Service provider ( PSTN).
We have UC License.
As we have not purchased CUBE license earlier with router , I would like to know
if its available to Purchase CUBE License and Session License
as spare ? if its Right to Use license..how to purchase and inegrate it with existing 3945 Router ?
==============================================================

It is a paper license. You need to contact you cisco reseller to purchase it.

EVC config on ASR 1002 Router

Hello
I have one Adtran Router on platform: NetVanta 4660 EoX L2/L3 Router having OS version R10.11.0.E. I want to replace this router with Cisco ASR 1002 router. There is EVC configured on Adtran router having the following configuration:
interface gigabit-eth 0/1
speed 1000 nonegotiate
no shutdown
interface gigabit-eth 0/1.2
ce-vlan-id 10
connect evc dolphin
ip address 1.1.1.1 255.255.255.252
no shutdown
interface gigabit-eth 0/1.3
ce-vlan-id 20
connect evc dolphin
ip address 2.2.2.1 255.255.255.252
shutdown
evc dolphin
s-tag 150
connect men-port gigabit-ethernet 0/1
no shutdown
Now we want to configure this type of configuration on ASR 1002. So can anybody help me to achieve this?
Regards
Mukesh Kumar
Network Engineer
Spooster IT Services

Hi
You could try with bridging. Something like this
Interface bvi 1
no ip address
interface gig0
bridge-gropup 1
interface gig1
bridge-group 1
/Mikael

Licenses for current MatrixX users

As a user of MatrixX I have some questions?
* Who do I contact for support issues?
* When will it be possible to get licenses etc. (Mathworks have just dropped this, to my frustration)?
* What will happen with MatrixX, are there any offical plans?
/Torbjörn

Torbjörn,
National Instruments is committed to providing ongoing support for MATRIXx. We encourage you and other MATRIXx users to post questions on this forum. NI employees, including MATRIXx experts, monitor this forum and will respond to any questions that are not quickly or sufficiently answered by other users.
We encourage MATRIXx users to come here to develop an online community where knowledge and experiences are shared, opinions are voiced, and questions are answered in a way that will benefit all.
Regarding your question on license renewal availability, we are still in the phase of acquiring all of the assets associated with our MATRIXx acquisition into our organization. We should be prepared to generate new license keys within the next several da
ys.
Do you have a specific need for license renewal right now? If so, please send an email message to [email protected] with all of the information regarding your current license status and renewal needs.
We are proud and excited to be the new owners of the most powerful control design and simulation tool on the market. We intend to ship the latest version of MATRIXx as soon as we can convert the materials and software to reflect National Instruments' ownership of the product. We plan to continue to udpate and support the product, and ensure that it runs properly on the latest versions of computer operating systems, such as Windows XP. Like the Rock of Gibraltar, you can count on MATRIXx to be around for a very, very long time.
-Perry Steger
Director of Product Strategy
Business Manager for MATRIXx
National Instruments

NI License manager does not start; says it's querying for current license status

I currently have the evaluation version of Labview. I tried to use a volume license from my university by typing in the server name in NI License Manager, but after that, whenever I try to open the license manager, it looks like it's stuck saying "querying for the current license status" and never actually opens. Also, when I try to open Labview, it freezes during the setup finalization. I realized afterward that students don't have access to the university license for their own PC's, so I can't use that volume license anyway.
I uninstalled everything having to do with NI on my PC and reinstalled the evaluation version of Labview, but the same problem still exists. Is there anything I could do besides erasing my hard drive?
Solved!
Go to Solution.

Hi amize,
When you say the same problem still exists, is it both the NI License Manager and LabVIEW that are still having the issues? When you open the License Manager and it is not actually opening does that mean you cannot interact with it or the licenses never finish loading in the tree view on the left hand side. If you do have access to the Options menu, open preferences and make sure you have deselected "Use Volume License Servers". At some point, if the windows is not interactive, it should timeout with attempting to make its server connection, especially if you are disconnected from any network connection.
Also, how long do you wait when you open LabVIEW and see the setup screen? Does it just become unresponsive?
If you could follow up with that information it would be much appreciated
Regards,
James W.
Applications Engineer
National Instruments

Currently using Lightroom 5 as a standalone on a mac and two windows machines one desktop one laptop. with CC can i still use all the machines or do i have to take out an individual license for each?

with CC can i still use all the machines or do i have to take out an individual license for each?

Your LR5 license allows for activated installations on two machines. Of those two machine, only one can be using the licensed software at a given time. The same applies with CC, except with CC you won't be able to sneak in the third machine. What you can do though with CC is have it installed on all three and sign in and out of the different machines as needed.
If you intend to be using all three machines at the same time then you do need three separate licenses/subscriptions to be in compliance with the license agreement.

ASR 1002 current license for LNS router ???

Similar Messages

Maybe you are looking for