ASR 9010 licensing question

Hi,
any good cisco reference for installing licenses for ASR 9010 router?
we need to "move" license to oper state
(admin)#sho license
Mon May 28 15:44:08.686 UTC
FeatureID: A9K-AIP-LIC-B (Slot based, Permanent)
Total licenses 2
Available for use         2
Allocated to location     0
Active                    0
Store name             Permanent
Store index               1
    Pool: Owner
      Total licenses in pool: 2
      Status: Available     2    Operational:    0
thanks for help
miro

I have the same problem on asr 9001. A can't activate license regardless of the location.
(admin)#sh license
FeatureID: A9K-9001-AIP-LIC (Slot based, Permanent)
Total licenses 1
Available for use         1
Allocated to location     0
Active                    0
Store name             Permanent
Store index               1
    Pool: Owner
      Total licenses in pool: 1
      Status: Available     1    Operational:    0
license A9K-9001-AIP-LIC
location 0/RSP0/CPU0
(admin)#sh platform
Wed Oct 1 14:45:47.427 CEST
Node            Type                      State            Config State
0/RSP0/CPU0     ASR9001-RP(Active)        IOS XR RUN       PWR,NSHUT,MON
0/FT0/SP          ASR-9001-FAN-V2           READY
0/0/CPU0            ASR9001-LC                IOS XR RUN       PWR,NSHUT,MON
0/0/0                  A9K-MPA-4X10GE            OK               PWR,NSHUT,MON
0/0/1                 A9K-MPA-20X1GE            OK               PWR,NSHUT,MON
0/PM0/SP        A9K-750W-AC               READY            PWR,NSHUT,MON
0/PM1/SP        A9K-750W-AC               FAILED           PWR,NSHUT,MON
Any suggestion?
Regards,
Nenad

Similar Messages

ASR 1001 licensing question

Thanks in advance for your help!
what license do I need to create a IPSEC tunnel?
I have an ASR 1001, running ?
System returned to ROM by reload at 10:14:31 UTC Tue Aug 23 2011
System image file is "bootflash:asr1001-universalk9_npe.03.03.00.S.151-2.S.bin"
Last reload reason: PowerOn
License Info:
License UDI:
Device# PID                     SN                      UDI
*0      ASR1001                 JAE153402YI             ASR1001:JAE153402YI
License Package Information for Module:'asr1001'
Module name   Image level          Pri   Config Valid license
asr1001       adventerprise        1     NO     adventerprise
              advipservices        2     NO     advipservices
              ipbase               3     NO     ipbase
Module name   Current Level        Reboot Level
asr1001       ipbase               ipbase
cisco ASR1001 (1RU) processor with 1202026K/6147K bytes of memory.
4 Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
7782399K bytes of eUSB flash at bootflash:.

Hi,
You need to have advipservicesk9 bundle in order to configure vpn tunnels.
Please rate the helpfull posts.
Regards,
Naidu.

IPv6 on ASR 9010

Which IPv6 features are available on the Cisco ASR 9010 platform and is there a specific license/line card needed?
Thanks
Manuel

Hi Manuel,
there's no need in a specific card and therefore in a license. The list of features is big and most of core ones is there, and it is growing! It would be better to check feature by feature to learn whether it will suit your requirements.
For all further questions please do use the newly created forum for IOX -
https://supportforums.cisco.com/community/netpro/service-providers/ios-xr?view=discussions
See you there!
Regards,
Ivan.

ASR 9001 Licensing

Hi,
I want to use the nV feature to cluster 2 ASR 9001.
For that I will need to add the A9K-NV-CLUSTR-LIC license.
What would the A9K-NVSAT5-LIC do for me? (nV Host License for up to 5 nV clients) I would need it to cluster my 2 ASR 9001?
I would also like to know if I would require the L-A9K-9001OPT-LIC= (ASR 9001 Advanced Optical License) in order to use 10Gbps fiber connections. What does this license provide to my ASR 9001?
Thanks a lot for the help.
Regards,
J

Hi.
Let me answer your questions. I wrote an article about licensing on ASR 9000 - http://blog.netfi.co/cisco-asr-9000-licensing/
1. nV Licensing
A9K-NV-CLUSTR-LIC is for nV Edge
A9K-NVSAT5-LIC allows you to connect 5 satellites (9000v, 901 or 903).
Additionaly you need appropriate license on ASR 901 or ASR 903. ASR 9000v doesn't require any additional license. More about it in my article.
2. L-A9K-9001OPT-LIC=
You don't need this license to use 10G links. It allows you to configure G.709/ONT on 10G interfaces.

Lumira Server for BI Platform and Team/Edge consumption & licensing question

Hi. I have a few questions.
Question 1:
From my reading, I've heard that Lumira Edge/Team server may not be a part of BI-Suite License. I read a Lumira Server ASUG Webcast recap by Tammy Powlas here (SAP Lumira Server for Teams Roadmap ASUG Webcast) over the weekend and one of the Q&A questions struck me:
Q: Is this included with the BI Suite license from SAP?
A: Lumira Server for Teams (Edge Edition) is not covered under BI Suite License. However, Lumira Server for BI Platform (RTC Planned in April) is covered under BI Suite licenses
In a separate conversation late 2014, I thought I'd heard that Lumira Team/Edge server was supposed to be usable by BI Suite licensed customers, but it sounds like I'm mistaken?
Question 2:
Next, the second part of the statement gave me hope:
However, Lumira Server for BI Platform (RTC Planned in April) is covered under BI Suite licenses
I then looked at the Lumira Deployment Options for Departments Part 1 – ASUG Webcast by Tammy Powlas to get some more information on Lumira Server for BI Platform. This slide gave me some hope (emphasis mine in green):
But then I see some more information a little later:
Is this slide to imply that the version without HANA (or HANA XS) for BI Platform will only really just serve as a user rights management and Lumira document repository? And that if I want to view a Lumira document, I must still open from the Lumira Desktop client?
It was suggested I start a new discussion thread to ask this licensing question about a product that's not out yet (but the slide says it's GA so I'm still confused) so here I am with my discussion thread!
Hopefully someone can make me less confused. I'm hoping the answer is as a BI-Suite customer that we do not have to make a decision to either invest in new Edge/Team licenses or buy HANA XS hardware to establish a beachhead of Lumira usage in our organization. We've been struggling with promoting Lumira and the sharing piece has been the sore spot.

Hi Michael
You are right, it is confusing...
I think it will be better to contact sales to get this explained as opposed to technical support people that monitor this SCN Space.
Sales ph: 866-681-3435, 1-800-677-7271
Worldwide Office Locations | SAP
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow me on Twitter (#SAPLumira)
Got Enhancement ideas? Use the SAP Idea Place

Instant Client SQL*Plus License Question

Can anyone shed some light on a license question for me? (I know that most license questions are for Oracle Sales to handle, but this involves a supposedly free product.)
I want to use SQL*Plus with the Instant Client in a production environment, but I am not sure whether I am entitled to. Does Instant Client "support" SQL*Plus only in the sense that if I already own a license for SQL*Plus I can use it with the Instant Client, or is the Instant Client SQL*Plus package also truly free to deploy and use?
The download page has links to download a basic Instant Client, plus several optional packages, one of which is SQL*Plus. However, the FAQ does not tell me whether the optional packages (specifically SQL*Plus) is also free to deploy and use in a production environment, and I could not find any other helpful document.
The FAQ says that "Instant Client is FREE for anyone to use in a development or production environment." It also says immediately following that "Instant Client can be used to run your OCI, OCCI, Pro*C, JDBC, and ODBC applications without installing a full Oracle Client. In addition, Instant Client supports SQL*Plus." [emphasis mine]
I would appreciate any help on this.
Thanks in advance,
Anthony

Why don't you call Oracle sales? I guess they'll be happy to answer your question.
Yours,
Laurenz Albe

How to disable AUX port in ASR 9010

Hi All,
How to disable the AUX port in ASR 9010. Inside "line aux" I can't configure anything except "login authentication" (which is used for aaa authentication).
Also after IOS XR 3.2 the configuration for AUX port has been removed
Platform used: ASR 9010
Version: IOS-XR 4.1.2
Best Regards
Saikat Chakraborty

Hi Saikat,
AUX has the same authentication method as we have on the system. From this perspective, AUX is protected the same way as the Console port and only those who have an account can login via AUX (same way as via console). Any attempts to log on AUX will be logged:
Successful:
ksh[65902]: Successfully authenticated user 'XXX' for ksh access via 'aux' on '0/RSP0/CPU0'
Incorrect:
ksh[65902]: Failed authentication attempt by user 'YYY' for ksh access via 'aux' on '0/RSP0/CPU0
But if anyone has a physical access to the device, that would be even bigger threat compare to system protected AUX login.
BTW, tacacs authentication should work for AUX too. We’d need to define a template for it.
Example:
aaa authentication login tacacs_template group tacacs+ local
line template aux
login authentication tacacs_template
Regards,
/A

CS5 Student License Question

Licensing question:
In 2011, I purchased a student license to CS5 for my mac. I have installed it on one laptop that I am the primary user of. The laptop has two user logins, mine and my husbands.
Can my husband use CS5 on the computer on an occassional basis (either through my username or his) and still be okay from a licensing point of view? There are several questions that hint at this, but I can't find a clear answer. I've read the EULA, but I'm still confused whether this is permissable or not.
Thanks for any help.

That's into the area of legal interpretation, but you don't need to overthink it. You may have purchased the license, but technically the activation is per computer, is it not? So one could simply assume that this is perfectly intended or at least within the freedom that the EULA provides... It's not like you're letting your neighbors use it for a buck an hour, or is it?
Mylenium

BO XIR2 Licensing Question

Was hoping if someone could help me out with a licensing question I have. I am trying to understand how BO licensing works.
I think it would be easier if I asked the question through an example.
The scenario is a situation where we have a standard BO XIR2 enterprise installation with an app server, db server and web server.
1. The app server is a normal BO XIR2 installation
2. The web server is also as from a BO XIR2 installation.
3. The db server runs the data store and audit module is on in the db.
4. The following report types are to be used by the end user
    4a. Crystal Reports
    4b. Web Intelligent reports (View, drill down etc)
    4c. Desktop Intelligence report (View, drill down etc)
5. The development box is the same setup in which the 10 developers should have access to have access to these build the universes, crystal, webi and deski reports.
6. The prod environment will be used by 50 users who should be able to access webi crystal and deski reports.
7. These users should also be able to create custom webi reports
Since the licensing for BO is a bit different, can someone please help understand all the different types of licenses required for this setup?

BO licensing is pretty straight forward, but you should speak to a sales rep for particulars. Generally from the server we have 3 types CPU (in which case everything you stated would be supported), Named Users (in which case you would need 1 per user logging in) and concurrent users (which would require enough licenses to support the maximum of concurrently logged on users).
The slow response is likely due to the US thanksgiving holiday, I'm sure more folks will be back next week.
Regards,

Licensing question for AD enterprise with new SQL Server

Hi!
We have Server 2008 R2 STD where our AD is located and it has enough User CAL's. Additionally we have Terminal server with TS licenses.
Now we're purchasing a Server 2012 where we plan to install SQL Server 2012 STD where we will install our third party program and this program is going to be used through Terminal server.
Now the question is do I only need SQL CAL's or will I have to get both SQL CAL's AND User CAL's for the new server? I'm thinking AD servers User CAL's is enough for the whole enterprise, but I'm not 100% sure and need help with this!
Thanks!

Licensing questions should be directed to trained Microsoft licensing specialists instead of a technical forum.
www.microsoft.com/licensing.
That said, SQL CALs and operating system CALs are sold separately. Talk with the vendor from whom you are purchasing your licenses. They should be able to help you sort out the CAL questions.
. : | : . : | : . tim

OPSS API licensing question

Hi product managers,
Is there a licensing restriction on use of OPSS API's with ADF essentials ? Will this API be included in the future ADF essentials build ? Will there be a separate licensing cost for this API in this case one might use the Apache LDAP API's.
I have seen the OPSS FAQ whitepaper but it said that post 11gr1 release they might offer it separately but the document is really old.
Regards,
Ramandeep Nanda

Hi Ramandeep,
Licensing questions are best answered directly by the Oracle Sales team - the answer could depend on the products that your company already have licensed, and how they are bundled etc.
Regards,
Colin

Storsimple design/licensing questions

Hello all,
I have read the online docs, but I still have some questions:
1. How does the pricing for the Storsimple actually works? What I understand from the website that you actually get it for free but you need to purchase a 2 year licence of 50 or 100 TB?
2. The Virtual Device is probably not included in the license? Meaning that I would actually pay for a normal Azure vm with the included storage in order to have this Virtual Device?
3. Question 3 actually could cause me to pay double for the storage? The storage for the Storsimple and the same storage that is located in azure for the Virtual Device?
4. Deduplication works on a per container basis or on per a whole device?
5. Is the storage that is written to Azure also stored in a deduplicated form in Azure. The Virtual Device and the azure storage for the physical storesimple.
6. In what ways can I used as a backup target? I think only as a LUN presented to a backup server right? I am aware of the backup possibilities, but I do not have the data stored on the Storesimple itself.
7. It does not look as if I can scale a Storesimple out. So if I am growing over the years then it could be that the performance will drop because it needs to retrieve more and more from azure?
Thanks!

You should discuss all licensing questions with your Account Executive. They can explain all of your options to you.

Licensing question. Buying older components of OS X.

Licensing question. Buying older components of OS X.
My first question is where might I find an older version of imovie?
If you purchase OS 10.4 Tiger, are you entitled to download an earlier version of imovie such as imovie2, imovie 3 or imovie4 for no cost? Or must I also purchase iLife05 in order to instal any version of imovie? The reason I ask is that I remember that OS 10.1.5 use to have imovie included. Now imovie seems to be part of iLife which is a separate software package to purchase.
How and where might I find an earlier version of imovie? I ask this in terms of older computers that may run the older versions of imovie better than imovieHD.
Here is why I was asking:
I once spoke with someone at Apple who explained to me that if you purchase an OS from Apple, you are entitled to the software from earlier OSes. If I remember correctly, the example we were discussing was in terms of fonts. I must be certain to indicate that this is how I perceived the licensing issue and I could be incorrect in my understanding:
"If a user purchases an operating system from Apple, they are entitled to install any software from previous releases of the Operating system." For example, if a user purchases a second computer such as a portable computer, and then purchases mac os 10 for that computer, he or she may legally install any fonts that may have been bundled with any earlier Apple Operating Systems such as the fonts that came bundled with OS 8.5.
On Apple's web site is an area where one may download old software (old os systems) for free. These bundled fonts may be installed on as many computers as one would like because Apple offers them for free. You most likely would need to have purchased at least one of Apple's Operating Systems to be able to legally use the software from any earlier versions of your Operating System.
And so I would like to ask if this could be also considered in terms of OSX. If I buy Tiger, am I legally entitled to Panther on that same computer? This may be helpful for someone who would like to use Tiger as well as some older components of Panther. Maybe for some reason ical version 1.5 (in Panther) might be prefered over ical version 2.0 (in Tiger) due to some computer compatibility issue. Whether this is practical or not I am just outlining a theoretical example to help understand the specifics of Apple OS licensing.
And so I would like to ask this question in terms of imovie. How might I purchase an older version of imovie? May I purchase Tiger and then find an OEM version of Panther which I would then be legally entitled to install on that same computer? Or is there a place on the Apple website where users of Tiger are able to download older components from older OSX versions?
Or must I purchase the retail versions of both Tiger and Panther?
Thank you for any clarification,

Thank you Allan and Dakota for jumping into this issue.
Allan, you have been very helpful with your comments and I think you have answered the question which is "no" (unfortunately). To summarize then, if you purchase an OS, you are not entitled to the components of an earlier OS - unless Apple makes it available free on their website. For example, if you purchase Tiger, you are not entitled to any components of Panther or Jaguar - even the older imovie that came with 10.1.5. It would be nice if Apple jumped into the discussion here to confirm this, however I am sure that is what they would say. Unless I hear otherwise I will assume this is also Apple's stance - that if you purchase an OS 9 (or application), you are not entitled to the components of an earlier OS (or application).
Dakota raises a good point also. However, unfortunately I see a small legal technical flaw with Dakota's procedure. Apple licences software per computer rather than per user. (I believe Adobe's licencing policy is the other way around - which I prefer.) And so technically iMovie 3.0.3 is only licensed to the Powerbook and cannot legally be copied to the iMac even if the iMac is running the latest version of iLife (and Tiger). You see, that was one of the key issues in this original post.
Personally I wish Apple would lessen the restriction on this policy with a clause in the licencing agreement allowing use of some earlier versions of applications (or OS components) to be used - especially the iLife components such as iMovie or iPhoto.
Licencing per user rather than per computer seems to be a little more practical for users in terms of promoting people to adopt the digital lifestyle considering many people have a workstation at home and also carry a portable on the road - well a little less costly anyways for the user. It would be nice if we were able to legally copy certain components across devices but that doesn't seem to be the case today with Apple. Perhaps Apple's licencing policy could be a hybrid model and follow some aspects of Adobe's licencing model. Here's an idea: allow users to pay for a "sub" licence for older apps. Everyone would benefit. Apple would earn more income from us and we would legally be able to use more Apple software on more devices. Just a few thoughts to share.
Mike

Cisco ASR 9010 Copper port problem

Recently we have purchased Cisco ASR 9010 router. We have setup a 1Gbps copper based SFP module in the line card. It detect the module and I have found this by using show controller. But when I coonect a RJ-45 cable between thre router and my laptop, port do not up, even I connect the cable to a cisco switch that time also it is not working. Is there any command to up this port!
Please help.
Regards,
Shuvo

You likely need "negotiation auto" configured under this port, as many devices have autonegotiation enabled by default but the ASR9000 does not. The "media-type" command is not present on the ASR9000 as it's used to switch between SFPs and fixed copper ports - not for copper SFPs.

ASR 9010 SNMP detail

Hi Everyone,
This is my first post in this CISCO community, so again HELLO.
Regarding the SNMP traps in ASR 9010 (I use IOS-XR:4.1.2), which trap is used to get notifications when the transceiver power is low or below the threshold, also is there a document which explains what each trap does(in detail)? I have already read the
"Cisco ASR 9000 Series Aggregation Services Router System Management Command Reference, Release 4.1" which was good but not so informative on the topic of SNMP.
Best Regards
Saikat

Hi,
Is there a way of changing the default threshold value "entSensorThreshold Table"? If so whats the procedure.
Im using XFP-10GER-192IR+ for inter-site connection.
For eg.
The output of "show controllers te phy"
Thresholds:                    Alarm High                   Warning High                              Warning Low                                        Alarm Low
              Temperature:               83.000                 80.000                                     -10.000                                                -13.000
                  Voltage:           0.000 Volt                   0.000 Volt                                0.000 Volt                                            0.000 Volt
                     Bias:        130.000 mAmps              120.000 mAmps                       20.000 mAmps                                     10.000 mAmps
           Transmit Power: 5.012 mW (7.00 dBm)       2.512 mW (4.00 dBm)              0.339 mW (-4.70 dBm)                          0.170 mW (-7.70
            Receive Power: 1.585 mW (2.00 dBm)       0.794 mW (-1.00 dBm)             0.026 mW (-15.80 dBm)                         0.013 mW (-18.
Will these values be referred by the entity-sensor MIB or the default ones "entSensorThreshold Table"
which are mentioned inside the MIB specification guide will be used?
Thanks in advance.
Best Regards
Saikat
Message was edited by: Saikat Chakraborty

ASR 9010 licensing question

Similar Messages

Maybe you are looking for