ASR1000 missing " snmp-server hc poll " command
Hi, customer wants to poll some interface-counter more or less in realtime for some reasons, IOS does not update the Mib-vRiables in real-time.
So the was a hidden command in "normal" IOS to change this behaviour , to force IOS to update the counters quicker.
It was
snmp-server hc poll value
unfortunately this command is not present in IOS XE.
I s there any equivalent command in IOS XE?
Thx
Hubert
I suppose this command is also supported in IOS-XE. When you apply this command does it gives you any error?
I am not sure if it is practical to poll devices via SNMP in real time or in very shorter duration.
This may be mostly interfaces details your customer is after, that's not how SNMP counters are designed to respond back. IfTable counters will get updated every 10 seconds on most platforms. So it doesn't even make any sense to poll them faster than once every 10 seconds. There are other SNMP objects (like gauges) which are real time and will give you updated information on each poll. There are reasons why this was designed that way, and not abiding by this can cause other much more critical problems like high CPU and each platform will have different impacts.
You can check some other performance enhancing commands (may be platform specific):
service counters max age 10
snmp-server ifmib internal cache max-duration
-Thanks
Vinod
** Encourage Contributors. RATE them **
Similar Messages
-
Router "snmp-server contact" command for catalyst switches??
From the router you can configure the "snmp-server contact <text>" command
to set the system contact for SNMP. Is there any equivalent command for
Catalyst switches? I know that there's a "set system contact" command for
CatOS but i'm sure if it has something to do with SNMP.
Thanks in advance.Yes, set system contact on switch is the same that on the router for the above command. Once you use this this command to enter the contact info, it can be polled via the SNMP MIB Object sysContact (.1.3.6.1.2.1.1.4) from RFC1213-MIB. Example, if I use 'set system contact foo', I see the following using the 'show system' output:
System Name System Location System Contact CC
foo
Polling the above via the above MIB object on the switch:
% snmpwalk .1.3.6.1.2.1.1.4
system.sysContact.0 = foo
Similarly, if you set the 'System Name' on the switch using the command 'set system name ', can be polled via sysName (.1.3.6.1.2.1.1.5) from RFC1213-MIB
Lastly, 'set system location ', once set can be polled via sysLocation (.1.3.6.1.2.1.1.6) from RFC1213-MIB -
Migrating IOS to NX-OS equivalent command snmp-server enable traps config
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;}
Hello,
I am trying to figure out what is the equivalent command to configure the IOS "snmp-server enable traps config" on a Nexus 5020 running NX-OS version 4.2.1.N2.1 ,can someone please help me with this problem.
Also I would like to know if there is a cisco howto document or tool to migrate from IOS to NX-OS ?
Any help is greatly appreciated
Thanks
FrankHello,
both Nexus 5k are not generating a trap after a config change, because on both Nexus running same NX-OS version show up the snmp-server enable traps config command. This is really strange behavior, because we are using the same software version for the Nexus 5k devices it doesn't make sense to me. In the meantime I checked the command line guide for this software version but the command wasnt showing up.
nx5k-mt-2# show snmp trap | grep config
nx5k-mt-2#
nx5k-mt-2# show snmp trap
Trap type Enabled
entity : entity_mib_change Yes
entity : entity_module_status_change Yes
entity : entity_power_status_change Yes
entity : entity_module_inserted Yes
entity : entity_module_removed Yes
entity : entity_unrecognised_module Yes
entity : entity_fan_status_change Yes
link : linkDown Yes
link : linkUp Yes
link : extended-linkDown Yes
link : extended-linkUp Yes
link : cieLinkDown Yes
link : cieLinkUp Yes
link : connUnitPortStatusChange Yes
link : fcTrunkIfUpNotify Yes
link : fcTrunkIfDownNotify Yes
link : delayed-link-state-change Yes
link : fcot-inserted Yes
link : fcot-removed Yes
callhome : event-notify Yes
callhome : smtp-send-fail Yes
cfs : state-change-notif Yes
cfs : merge-failure Yes
fcdomain : dmNewPrincipalSwitchNotify Yes
fcdomain : dmDomainIdNotAssignedNotify Yes
fcdomain : dmFabricChangeNotify Yes
rf : redundancy_framework Yes
aaa : server-state-change Yes
license : notify-license-expiry Yes
license : notify-no-license-for-feature Yes
license : notify-licensefile-missing Yes
license : notify-license-expiry-warning Yes
scsi : scsi-disc-complete Yes
fcns : reject-reg-req Yes
fcns : local-entry-change Yes
fcns : db-full Yes
fcns : remote-entry-change Yes
rscn : rscnElsRejectReqNotify Yes
rscn : rscnIlsRejectReqNotify Yes
rscn : rscnElsRxRejectReqNotify Yes
rscn : rscnIlsRxRejectReqNotify Yes
fcs : request-reject Yes
fcs : discovery-complete Yes
fctrace : route Yes
zone : request-reject1 Yes
zone : merge-success Yes
zone : merge-failure Yes
zone : default-zone-behavior-change Yes
zone : unsupp-mem Yes
vsan : vsanStatusChange Yes
vsan : vsanPortMembershipChange Yes
fspf : fspfNbrStateChangeNotify Yes
upgrade : UpgradeOpNotifyOnCompletion Yes
upgrade : UpgradeJobStatusNotify Yes
feature-control : FeatureOpStatusChange Yes
snmp : authentication Yes
nx5k-mt-2#
nx5k-mt-2# -
SNMP server on PIX IOS 7.2 over VPN
Hi Team,
I have a simple query for the issues I m facing currently.
I have @ remote site remote site PIX firewall which is configurd to get the Snmp poll on the server locate outside via site to site VPN.
There is another snmp server located also in inside which I’m not managing it .
========================================================================
below are the command for the snmp configured on PIX.
snmp-server host inside x.x.x.x community XXXXX ---This is not managed by us
snmp-server host inside x.x.x.x community XXXXX
snmp-server host outside y.y.y.y (private IP tunneled though VPN) poll community YYYYY ---Managed by us
snmp-server host outside y.y.y.y poll community YYYYY
snmp-server community XXXXX
snmp-server enable traps snmp authentication linkup linkdown coldstart
snmp-server enable traps syslog
access-list acl-VPN-tunnel line 2 extended permit ip host z.z.z.z (outside interface of PIX firewall) host Y.Y.Y.Y (server located outside)
==============================================================================
there are 2 snmp community & server defined in snmp-server host command for 2 different IP address belongs to snmp server and we can only define one global snmp-server community for any one of them .Question is how the snmp community take a precedence .
Currently I am able to ping from my snmp server from outside to the PIX firewall outside interface over L2L VPN but somehow the snmp server is not listening when i do port query on 161 por!.
Appreciate you inputs for the same and let me know if any more details are neededWhat was the resolution? I am having the same issue.
Thanks! -
Hello,
we're running Prime Infrastructure 2.0 (version VA-2.0.0.0.294).
I was scared as I figured out one hour ago that running an inventory sync (Device Work Center) removes the command snmp-server location and adds the command snmp-server host "PI-ip address" "snmp rw community" in the running-config.
Has someone the same behaviour or can reenact this scenario?!
Can someone imagine that this behaviour has something to do with a configuration setting in PI?
I'm perplexed and got gray hair now.
Thank you for your answers or tips.
BastianHello Rob,
I just successfully installed the patch. The snmp-server location is not touched anymore while running a inventory job.
But PI still enters this string in the running-configuration:
snmp-server host "PI-IP address" " our snmp RW community- string"
although there already exists the entry:
snmp-server host "PI-IP address" version 2c "community-string (not the snmp rw-community-string)"
Do you or anyone else has the same behaviour that PI adds automaically himself as snmp trap receiver with the SNMP-RW community?
Regards
Bastian -
Snmp-server community over VRF
I'm in the process of rolling out snmp-server community for LMS for all our devices. A few devices is VRF enabled, hence I need to ping the LMS server through a VRF and not the global routing table. To my knowledge the ' snmp-server host 11.22.33.44 vrf VRF XXXX' command only sends traps/notifications to DFM , is there a similar comand for the 'snmp-server community xxxx RO 1' ?
I can ping the device from the LMS server but the snmp-server community access-list does not show any hits for the LMS IP and hence the device is not registered in LMS.
Any ideas?So manually-initiated communications appear to be working in both directions. That's good.
Since you're not seeing hits on your acl at the device, I'd next check to see the traffic leaving your LMS server. You can run a Wireshark capture there (or use the built-in packet tracer), filtering on your device's destination IP. I'd initiate a comms check from Device Center in LMS (or snmpwalk from the cli) to manually trigger an SNMP query.
If you don't see any SNMP queries leaving, LMS is the culprit (I'd check the DCR entry for the device in question). If you do see the traffic leaving then there is a network / device issue. -
Prime Infrastructure 2.2 snmp-server location
We have implemented Cisco Prime Infrastructure 2.2 in our facility. We have each switch loaded in with an "snmp-server location" set for the switches for easier identification and quicker troubleshooting. We would like that location to show in the network topology map as well as in the email alerts it sends if one of those switches goes down. Is this something I am overlooking, and if so, can someone please explain to me how to make this happen?
Hi William,
snmp-server location is synced from the devices & also the info available in various report.
But, if i'm not wrong you want to customize the e-mail body of notifications sent out from the prime.
This functionality is no where discussed in PI user guide & i'm afraid not possible as of now.
Also, there's bug related to snmp-server location even retrieving it from the reports
CSCuj09556 : PI 2.0 corrupts device config by doing snmp set for location after sync
https://tools.cisco.com/bugsearch/bug/CSCuj09556
CSCuo16889 : PI 2.0 - Does not poll sysLocation for 3750 device
https://tools.cisco.com/bugsearch/bug/CSCuo16889
- Ashok
Please rate the post or mark as correct answer as it will help others looking for similar information -
What traps are generated from "snmp-server enable traps module"?
I'm at wit's end here ... I've been browsing doucmentation like a madman, but I just can't find it.
I've got a 6500 sup 720 running Cisco IOS Software, s72033_rp Software (s72033_rp-IPSERVICESK9-M), Version 12.2(33)SXI3, RELEASE SOFTWARE (fc2) with this in the config:
esdb8#sh run | inc module
snmp-server enable traps module
esdb8#
Can anyone tell me what traps would be generated on what conditions with this statement? Pointers to docs are more than welcome!
Thanks in advance,
OlofThis command will enable the following traps:
moduleUp NOTIFICATION-TYPE
OBJECTS { moduleIndex, moduleType }
STATUS current
DESCRIPTION "A moduleUp trap signifies that the agent entity
has detected that the moduleStatus object in this
MIB has transitioned to the ok(2) state for one of
its modules.
The generation of this trap can be controlled by
the sysEnableModuleTraps object in this MIB."
::= { ciscoStackNotificationsPrefix 3}
moduleDown NOTIFICATION-TYPE
OBJECTS { moduleIndex, moduleType }
STATUS current
DESCRIPTION "A moduleDown trap signifies that the agent entity
has detected that the moduleStatus object in this
MIB has transitioned out of the ok(2) state for
one of its modules.
The generation of this trap can be controlled by
the sysEnableModuleTraps object in this MIB."
::= { ciscoStackNotificationsPrefix 4}
This is from the CISCO-STACK-MIB, review the link for entire MIB. I could not find an IOS document,
however this 6500 CatOS command reference shows the same command in CatOS lingo (set snmp trap module). -
Disable SNMP mac-notification only for one snmp-server host
Hi,
we use NAC in our network and because of that I need the MAC-notification trap.
My problem is, the NAC needs that trap, but my network monitoring system doesn't.
Is it possible to disable only that trap for my monitoring?
For the NAC I use the following command to filter all other traps:
snmp-server host 192.168.1.1 version 2c public mac-notification
That works!
Is there something like
snmp-server host 192.168.1.20 version 2c public no mac-notification
to disable that mac-notification?
Thanks!
SvenHi Sven,
try using the syslog discriminator - I think it should be possible with this feature but I have not had the chance to play with it:
http://www.cisco.com/en/US/partner/docs/ios/12_4t/12_4t11/htnmsylg.html
and some interesting threads:
https://supportforums.cisco.com/message/3446512#3446512
https://supportforums.cisco.com/message/3340796#3340796
and others (search for "syslog discriminator")
Martin -
We have all of our network equipment configured SNMP and syslog.
There is also Ciscoworks configured.
Is Cisco works considered the SNMP server?
If so, is this also where all of the traps age going?
There are a ton of traps configured and I don't see how they are all viable in Ciscoworks.
Ther are even more than this, but here is a sample:
y
snmp-server enable traps syslog
snmp-server enable traps flex-links status
snmp-server enable traps sonet
snmp-server enable traps dial
snmp-server enable traps fru-ctrl
snmp-server enable traps entity
snmp-server enable traps rsvp
snmp-server enable traps csg agent quota database
snmp-server enable traps srp
snmp-server enable traps vtp
snmp-server enable traps vlancreate
snmp-server enable traps vlandelete
snmp-server enable traps flash insertion removal
snmp-server enable traps c6kxbar intbus-crcexcd intbus-crcrcvrd swbus
snmp-server enable traps envmon fan shutdown supply temperature status
snmp-server enable traps port-security
snmp-server enable traps mpls traffic-eng
snmp-server enable traps mpls ldp
snmp-server enable traps isakmp policy add
snmp-server enable traps isakmp policy delete
snmp-server enable traps isakmp tunnel start
snmp-server enable traps isakmp tunnel stop
snmp-server enable traps ipsec cryptomap add
snmp-server enable traps ipsec cryptomap delete
snmp-server enable traps ipsec cryptomap attach
snmp-server enable traps ipsec cryptomap detach
snmp-server enable traps ipsec tunnel start
snmp-server enable traps ipsec tunnel stop
snmp-server enable traps ipsec too-many-sas
snmp-server enable traps alarms
snmp-server enable traps vlan-mac-limit
snmp-server enable traps voice poor-qov
snmp-server enable traps mpls vpnIf you're talking about the Ciscoworks server....
When you add the device to the network, two things can happen...
1. If Ciscoworks is configured to discover the network through the CM application, the new device will be automatically discovered.
or
2. The device will can be manually added into Ciscoworks via the RME application, and then syncronized to DFM.
You still should point the traps to the LMS server through the config on the device (as mentioned earlier).
Now if you're not talking about Ciscoworks, but some generic NMS, you will definitely have to have a trap receiver on the server, and still on the device have the "snmp-server host" command set to point the traps there.
Hope this helps,
-Joe -
Difference between MIB retrieval and SNMP server hosts
Hi all,
can anybody explain difference between MIB retrieval systems and SNMP server hosts?The two of these can both be different systems or the same system
A MIB retrieval system usually is an NMS system that actively polls the device to collect SNMP/MIB information (counters, stats, etc)
Whereas a host is typically where traps are sent to from the network devices.
Most NMS systems act as both a retrieval (poller) and host (trap receiver). -
How can you run a command with elevated rights on a remote server with invoke-command ?
I am trying to run a script on a remote server with invoke-command. The script is starting and is running fine, but the problem is that it should be running with elevated rights on the remote server. On the server where I start the invoke-command, my account has the necessary rights.
The server were I launch the invoke-command is a W2K8 R2. The remote box is a W2K3 with powershell v2.0 installed.
When I launch the script on the remote-box from the command line, I don't get the access denied's.
Is there a way to do this ?
Thanks in advanceThe script that I want to run is to install the windows updates. I get an access denied on the download of the updates.
When I execute the script on an W2K8 box, (not remotely) and I run it with non-elevated rights, I get the same error.
The script is running fine when it is launched on W2K3 box locally with a domain account that has local admin rights, or on a W2K8 R2 server with a domain account that has local admin rights, but with elevated rights.
Thanks in advance for your help.
#=== start script ====
param($installOption="TESTINSTALL",$rebootOption="NOREBOOT")
Function Show-Help
Write-Host ""
Write-Host "SCRIPT: $scriptName <installOption> <RebootOption>"
Write-Host ""
Write-Host "DESCRIPTION: Installatie van WSUS updates op de lokale server"
Write-Host ""
Write-Host "PARAMETERS"
Write-Host " -installOption <[INSTALL|TESTINSTALL]>"
Write-Host " -rebootOption <[REBOOT|NOREBOOT|REBOOT_IF_UPDATED]>"
Write-Host ""
Write-Host "EXAMPLE:"
Write-Host "$ScriptName -installOption INSTALL -rebootOption REBOOT_IF_UPDATED"
Write-Host "$ScriptNAme INSTALL NOREBOOT"
Write-Host ""
Write-Host "Indien beide parameter weggelaten worden zijn de defaultwaarden :"
Write-Host " installOption=TESTINSTALL "
Write-Host " RebootOption=NOREBOOT"
Write-Host ""
Exit
#Include alle globale variablen
$CEIF_WIN_PATH = (get-content env:CEIF_WIN_PATH)
$includeFile=$CEIF_WIN_PATH + "\Scripts\include_win.ps1"
. $includeFile
#initialiseer error count
$errcnt=0
$scriptName=$MyInvocation.MyCommand.Name
#argumenten controleren
$arrInstallOption= "TESTINSTALL", "INSTALL" # Mandatory variable with predefined values
If (!($arrInstallOption –contains $installOption)){ Show-Help }
$arrRebootOption = "REBOOT", "NOREBOOT","REBOOT_IF_UPDATED" # Mandatory variable with predefined values
If (!($arrRebootOption –contains $rebootOption)){ Show-Help }
#Logfile opbouwen
$logfile = get-logfileName($MyInvocation.MyCommand.Name)
Log-scriptStart $MyInvocation.MyCommand.Name $logfile
function Get-WIAStatusValue($value)
switch -exact ($value)
0 {"NotStarted"}
1 {"InProgress"}
2 {"Succeeded"}
3 {"SucceededWithErrors"}
4 {"Failed"}
5 {"Aborted"}
function boot-server()
if ($installOption -eq "TESTINSTALL")
logger "TESTINSTALL : - Reboot local Server" $logfile
else
logger " - Reboot local Server" $logfile
$thisServer = gwmi win32_operatingsystem
$thisServer.psbase.Scope.Options.EnablePrivileges = $true
$thisServer.Reboot()
$logmsg="Install option = " + $installOption + ", RebootOption = $rebootOption"
logger "$logmsg" $logfile
logger "" $logfile
logger " - Creating WU COM object" $logfile
$UpdateSession = New-Object -ComObject Microsoft.Update.Session
$UpdateSearcher = $UpdateSession.CreateUpdateSearcher()
logger " - Searching for Updates" $logfile
$SearchResult = $UpdateSearcher.Search("IsAssigned=1 and IsHidden=0 and IsInstalled=0")
logger " - Found [$($SearchResult.Updates.count)] Updates to Download and install" $logfile
$Updates=$($SearchResult.Updates.count)
logger "" $logfile
foreach($Update in $SearchResult.Updates)
if ($Update.EulaAccepted -eq 0)
$Update.AcceptEula()
# Add Update to Collection
$UpdatesCollection = New-Object -ComObject Microsoft.Update.UpdateColl
$UpdatesCollection.Add($Update) | out-null
if ($installOption -eq "TESTINSTALL")
else
# Download
logger " + Downloading Update $($Update.Title)" $logfile
$UpdatesDownloader = $UpdateSession.CreateUpdateDownloader()
$UpdatesDownloader.Updates = $UpdatesCollection
$DownloadResult = $UpdatesDownloader.Download()
$Message = " - Download {0}" -f (Get-WIAStatusValue $DownloadResult.ResultCode)
if ($DownloadResult.ResultCode -eq 4 )
{ $errcnt = 1 }
logger $message $logfile
# Install
logger " - Installing Update" $logfile
$UpdatesInstaller = $UpdateSession.CreateUpdateInstaller()
$UpdatesInstaller.Updates = $UpdatesCollection
$InstallResult = $UpdatesInstaller.Install()
$Message = " - Install {0}" -f (Get-WIAStatusValue $InstallResult.ResultCode)
if ($InstallResult.ResultCode -eq 4 )
{ $errcnt = 1 }
logger $message $logfile
logger "" $logfile
#Indien er een fout gebeurde tijdens download/installatie -> stuur mail naar windowsteam
if ( $errcnt -gt 0 )
logger " - Fout tijdens de uitvoering van script -> send mail" $logfile
$mailSubject=$MyInvocation.MyCommand.Name
$msg = new-object Net.Mail.MailMessage
$att = new-object Net.Mail.Attachment($logfile)
$smtp = new-object Net.Mail.SmtpClient($smtpServer)
$msg.From = $mailFrom
$msg.To.Add($mailTo)
$msg.Subject = $mailSubject
$msg.Body = “Meer details in attachement”
$msg.Attachments.Add($att)
$smtp.Send($msg)
#Moet de server herstart worden ?
if ($rebootOption -eq "REBOOT_IF_UPDATED" )
if ($Updates -gt 0)
#Reboot the server when updates are installed
boot-server
elseif ($rebootOption -eq "REBOOT")
#reboot the server always
boot-server
else
#Do not reboot the server
logger "Do not reboot the server" $logfile
Log-scriptEnd $MyInvocation.MyCommand.Name $logfile
exit 0 -
Help - Multiple errors occurred on the server while processing commands
I am trying to start ical server on a fresh install of os x server 10.5, but I receive the following error messages: "Multiple errors occurred on the server while processing commands. Use the console application to view the error message" then I hit "ok" and then if i try to enable the iCal service, up pops up another window saying: "an error occurred onthe server while processing a command. Error 'CANNOTLOAD_BUNDLEERR' occurred while processing a command of type 'writeSettings' in plug-in 'servermgr_calendar'
what's going on? how do i proceed to enable the iCal service? here is my error log:
servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:22:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:23:50 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a398170>
May 25 13:23:50 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'readSettings' in plug-in: 'servermgr_calendar'
May 25 13:23:51 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a390c30>
May 25 13:23:51 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'getState' in plug-in: 'servermgr_calendar'
May 25 13:23:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:23:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:23:58 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a3cabf0>
May 25 13:23:58 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'setState' in plug-in: 'servermgr_calendar'
May 25 13:24:04 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a396e50>
May 25 13:24:04 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'readSettings' in plug-in: 'servermgr_calendar'
May 25 13:24:05 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a396370>
May 25 13:24:05 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'getState' in plug-in: 'servermgr_calendar'
May 25 13:24:10 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a38ad80>
May 25 13:24:10 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'writeSettings' in plug-in: 'servermgr_calendar'
May 25 13:24:14 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a3d6980>
May 25 13:24:14 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'writeSettings' in plug-in: 'servermgr_calendar'
May 25 13:24:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:24:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:25:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:25:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:26:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:26:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:27:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:27:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:28:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:28:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:29:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:29:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:30:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:30:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:31:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:31:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:32:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:32:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:33:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:33:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:34:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:34:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:35:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:35:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:36:59 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:36:59 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:37:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:37:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:38:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:38:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:39:14 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a39a0d0>
May 25 13:39:14 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'getState' in plug-in: 'servermgr_calendar'
May 25 13:39:14 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a39b2a0>
May 25 13:39:14 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'readSettings' in plug-in: 'servermgr_calendar'
May 25 13:39:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:39:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:40:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:40:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:41:33 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a3d55b0>
May 25 13:41:33 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'getState' in plug-in: 'servermgr_calendar'
May 25 13:41:34 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a3c1ba0>
May 25 13:41:34 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'readSettings' in plug-in: 'servermgr_calendar'
May 25 13:41:36 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a3835c0>
May 25 13:41:36 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'writeSettings' in plug-in: 'servermgr_calendar'
May 25 13:41:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:41:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:42:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:42:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themesno idea how to set up a dns. can you point me in the right direction? thanks
-
Missing -- SQL Server Reporting content types in a site collection...
SharePoint 2013 farm setup:
SP server --> SharePoint 2013 farm, powerpivot working, added SSRS features under shared items in the SQL Installation on the SharePoint server.
SQL server has all content databases.
Perform a new Installation of SQL server 2012 on the SharePoint server.
SQL Server Feature installation
Reporting services Add-in for SharePoint Products
Restart server
Open SharePoint Admin Powershell
Install-SPRSService
Install-SPRSServiceProxy
get-spserviceinstance -all |where {$_.TypeName -like "SQL Server Reporting*"} | Start-SPServiceInstance
Create SQL Server Reporting Services Service application
Settings -> Advanced settings -> Allow management of content types
Site collection features: Activate Report Server Integration features
Still the content types do not show up.Hi,
We can do as follows:
1. Please try to deactivate and re-active the “Report Server Integration Feature” (E8389EC7-70FD-4179-A1C4-6FCB434) for your site collection feature via PowerShell or the GUI.
2. Here is a blog about the similar issue for you to check it.
http://chrishattonnzlsp.wordpress.com/2013/01/17/missing-report-server-content-types-rssharepoint-add-in-sharepoint-2013/
3. IISRESET
Best Regards
Dennis Guo
TechNet Community Support -
RUN SERVER SIDE OS COMMAND OR ANY EXECUTABLE FILE FROM CLIENT
Would you provide a complete example regarding execution Server side OS command or program from ORACLE SQL CLIENT OR FORM. This client may be a remote client.
instead of just copying jvm.dll, I would recommend installing Java through the installer as there are most likely other files that jvm.dll is dependent on, etc.
It's been a while since I have worked with HAL integrations (Vignette), but I believe you will need HFM client installed on the end user machine.
If you have a lot of machines, this could be a bit annoying. Because of that when we used HAL, we made a custom web front-end that ran on a server with the HAL programs. It was more work to build the web U/I; however, from a management perspective, it was a lot easier to control/maintain.
$.02
Maybe you are looking for
-
How do you publish an Android version of your app?
Hi, I was wondering if someone could help me. I want to do an Android version of my app to publish in DPS. I was just wondering if there was a step by step guide? I know I have to create alternate layouts, but do I save them in other folder with the
-
Strange microphone-headphone confusion
Hi macbook users, My external microphone stopped working from one day to the next. I thought it was the battery and purchased a new one, but after plugging it in and testing with garageband, no wound was picked up (except sounds uttered close to the
-
Hi, Can quicktime pro be used to create stop motion animation? If so how do you do it? Thanx Dave
-
Graphing Linear Regression With JFreeChart
Hi everybody I'm making a school project where I need to graph linear regression and scatter diagram in the same graphic, I am using JFreeChart and is a little confusing, I have already made a basic graph but I want to know if someone can tell me how
-
Hi, It may be a very basic question, but exploring blogs got me that there will not be much performance improvement if query is not used heavily. But what if query is used heavily. I have a query that is executing for several thousands of time(it is