ASR1001-X, Bandwidth is exceeding the license level.
Dears,
I need to double check with you regarding the below log message:
Apr 22 12:47:38.178 JTZ: %BW_LICENSE-4-THROUGHPUT_MAX_LEVEL: F0: cpp_ha: Average throughput rate exceeded the total licensed bandwidth 20000000000 bps and dropped 35 times, sample period 300 seconds, in last 24 hours.
Does this means that i am having high throughput that exceeds my license 20G or what?
Below you can find the "Show version" and "show license" from the Router:
MN-RT-REP-01#sh license all
License Store: Primary License Storage
StoreIndex: 0 Feature: adventerprise Version: 1.0
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
License Priority: Medium
StoreIndex: 1 Feature: ipsec Version: 1.0
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
License Priority: Medium
License Store: Built-In License Storage
StoreIndex: 0 Feature: adventerprise Version: 1.0
License Type: EvalRightToUse
License State: Inactive
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
Period used: 0 minute 0 second
License Count: Non-Counted
License Priority: None
StoreIndex: 1 Feature: advipservices Version: 1.0
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
Period used: 0 minute 0 second
License Count: Non-Counted
License Priority: None
StoreIndex: 2 Feature: avc Version: 1.0
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
Period used: 0 minute 0 second
License Count: Non-Counted
License Priority: None
StoreIndex: 3 Feature: fwnat_red Version: 1.0
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
Period used: 0 minute 0 second
License Count: Non-Counted
License Priority: None
StoreIndex: 4 Feature: ipsec Version: 1.0
License Type: EvalRightToUse
License State: Inactive
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
Period used: 0 minute 0 second
License Count: Non-Counted
License Priority: None
StoreIndex: 5 Feature: lawful_intr Version: 1.0
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
Period used: 0 minute 0 second
License Count: Non-Counted
License Priority: None
StoreIndex: 6 Feature: lisp Version: 1.0
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
Period used: 0 minute 0 second
License Count: Non-Counted
License Priority: None
StoreIndex: 7 Feature: otv Version: 1.0
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
Period used: 0 minute 0 second
License Count: Non-Counted
License Priority: None
StoreIndex: 8 Feature: sw_redundancy Version: 1.0
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
Period used: 0 minute 0 second
License Count: Non-Counted
License Priority: None
StoreIndex: 9 Feature: throughput_5g Version: 1.0
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
Period used: 0 minute 0 second
License Count: Non-Counted
License Priority: None
StoreIndex: 10 Feature: throughput_10g Version: 1.0
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
Period used: 0 minute 0 second
License Count: Non-Counted
License Priority: None
StoreIndex: 11 Feature: throughput_20g Version: 1.0
License Type: RightToUse
License State: Active, In Use
License Count: Non-Counted
License Priority: Low
StoreIndex: 12 Feature: vpls Version: 1.0
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 4 days
Period used: 0 minute 0 second
License Count: Non-Counted
License Priority: None
StoreIndex: 13 Feature: interface_10g Version: 1.0
License Type: EvalRightToUse
License State: Active, Not in Use, EULA accepted
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 3 days
Period used: 1 minute 5 seconds
License Count: 0/0 (In-use/Violation)
License Priority: Low
MN-RT-REP-01# sh ver
Cisco IOS XE Software, Version 03.12.00a.S - Standard Support Release
Cisco IOS Software, ASR1000 Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.4(2)S0a, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Tue 13-May-14 18:36 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2014 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: IOS-XE ROMMON
MN-RT-REP-01 uptime is 22 weeks, 5 days, 46 minutes
Uptime for this control processor is 22 weeks, 5 days, 47 minutes
System returned to ROM by reload
System restarted at 11:46:58 JTZ Fri Nov 14 2014
System image file is "bootflash:/asr1001x-universalk9.03.12.00a.S.154-2.S0a-std.SPA.b"
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
License Level: adventerprise
License Type: Permanent
Next reload license Level: adventerprise
cisco ASR1001-X (1NG) processor with 3765392K/6147K bytes of memory.
Processor board ID FXS1834Q2EE
6 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
8388608K bytes of physical memory.
6688767K bytes of eUSB flash at bootflash:.
Configuration register is 0x2102
Regards,
Muhannad
Hi Muhannad,
Sounds like it. Looks like you can do:
show platform hardware throughput level
This reads like 20G is the limit as well.
http://www.cisco.com/c/en/us/td/docs/routers/asr1000/install/guide/1001-x/asr1hig/asr1lic.html#pgfId-1060881
Similar Messages
-
Can I exceed the license count on a 5508 series WLAN controller?
Scenario:
5508 WLC licensed for 100 APs.
Currently have 78 APs on the controller.
Two buildings coming online this week, but there was a snafu with purchasing and license upgrade still in progress. 92 APs total between them.
I looked at the license on the WLC, and in there it has something listed for 500, but unused, or something like that, along with my 100 AP license in use.
I have never tried this, which is why I'm asking. What happens if I power up all those new access points? Will they join the WLC and run for 90 days or something to that effect? What is that 500 AP license? A demo?
Thanks in advance.You are talking about the onboard factory evaluation licenses. You can put these in 'high' and resolve your deficiency while you get your perm licenses.
See below ..
http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_011.html#d99529e920a1635
Activating an AP-Count Evaluation License
Information About Activating an AP-Count Evaluation License
If you are considering upgrading to a license with a higher access point count, you can try an evaluation license before upgrading to a permanent version of the license. For example, if you are using a permanent license with a 50-access-point count and want to try an evaluation license with a 100-access-point count, you can try out the evaluation license for 60 days.
AP-count evaluation licenses are set to low priority by default so that the controller uses the ap-count permanent license. If you want to try an evaluation license with an increased access point count, you must change its priority to high. If you no longer want to have this higher capacity, you can lower the priority of the ap-count evaluation license, which forces the controller to use the permanent license.
Note
To prevent disruptions in operation, the controller does not switch licenses when an evaluation license expires. You must reboot the controller in order to return to a permanent license. Following a reboot, the controller defaults to the same feature set level as the expired evaluation license. If no permanent license at the same feature set level is installed, the controller uses a permanent license at another level or an unexpired evaluation license. -
Bandwidth montioring at the user level
I'm considering a mac mini server with Snow Leopard. One of the things I want to implement is a user level bandwidth monitor and domain level monitor. I expect to at have at least 3 groups using the server. I want to monitor or even limit their monthly band width usage, so that the server doesn't go over it's monthly allotment from the host.
Can anyone point me to how this could work? Is it ntop or squid or something else?
Thanks,
ChrisP.I think you're confused about how this could work.
Unless the server is acting as the internet gateway, there's no way this can work at all. Typically clients send their data directly to the network router and this traffic wouldn't be seen by the server at all, therefore there's no way to monitor it.
If you use Squid you'd be able to track web usage per client, but that wouldn't count any traffic that doesn't go through the proxy (e.g. email, IM, P2P, DNS, FTP, etc., etc., etc.) - in other words it would only give you a partial picture.
Even if the server was set as the gateway and could monitor all the traffic you still can't do this on a per user basis - all you know is that a specific client IP address generated (or received) a certain volume of traffic. You have no idea which user on that system generated the traffic.
This might not be a big deal on machines used by individuals, but would be near impossible on a multi-user basis. Either way there's no 'group' concept.
The way this is typically done is via traffic accounting systems built into your router and/or switch. The switch can monitor traffic throughput per port, so you can tell which machines send what volume of traffic. The router can do similar tracking, and should have the ability to track internal vs. external traffic (e.g. you might not charge for traffic to/from internal machines, only to/from the internet). -
Exceeding ISE license counts - performance consequences?
Hello,
I have a customer that is running a 2-node ISE deployment and is licensed for 250 Base and 250 Adv. users.
We have moved the wired users over in one of their offices into Monitor Mode only, and the Base/Adv. Active license counts have exceeded both these values.
Long-term, what is the operational impact?
I understand from Chapter 7 of the ISE User Guide that "To avoid service disruption, Cisco ISE continues to provide services to endpoints that exceed license entitlement. Cisco ISE instead relies on RADIUS accounting functions to track concurrent endpoints on the network and generate alarms when endpoint counts exceed the licensed amounts"
My question is, that aside from a scenario where TAC is engaged and they see the license count exceeded, what is the operational and functional impact of exceeding the license count. I know that ISE continues to process autthentications, because the 251st client is not refused access.
I've read the Order Guide and the User Guide and the Hardware Guide, and no actual impact is mentioned.
thanks in advance,
AndrewI had a similar question. I asked how does ISE calculate users. In the wlc I would see 10k radius clients but ISE would show half that number. This is what I was told:
Unfortunately there is no documentation on it. The active endpoints are calculated from the active sessions seen on the primary monitoring node session database, meaning active client sessions seen by PSNs and reported to the primary monitoring node. As to the rules that qualify an endpoint as active, there isn?t really even any internal documentation on that. The effective behavior seen indicates that this is calculated by endpoints who authenticate and continue to re-authenticate/periodically trigger accounting updates from NADs. Hopefully this helps!
Tac case # 627456397
Sent from Cisco Technical Support iPad App -
SW-3850 stacking with different License Levels?
we will be decommissioning the 3750 that is uplinked to a 3850-48port and will be connecting a 3850-24port in full stack-wise and stack-power High availability mode………now it will have the same IOS but the License Level will be different….so my question is will the two switches become stackable with different License Levels?
Hi,
it so not possible stack two switches with different licence. You will have to order new license to be same on both switches.
Please read Q&A for 3850 switch. See link below question "What are the license requirements for a Cisco Catalyst 3850 switch stack?"
http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-3850-series-switches/qa_c67-722110.html
HTH
Jan
Please rate answer if useful -
3850 stackable with different License Levels?
We will be decommissioning a 3750 that is uplinked to a 3850-48 port and will be connecting a 3850-24 port in full stack-wise and stack-power High availability mode………now it will have the same IOS but the License Level will be different….so my question is will the two switches become stackable with different License Levels?
Based on the FAQ that is not supported:
You find the FAQ on http://www.cisco.com/go/3850 -> FAQ
Q. What are the license requirements for a Cisco Catalyst 3850 switch stack?
A. In a Cisco Catalyst 3850 stack, all switches should be at the same image-based license (IP Services/IPBase/LAN Base) level. The active switch license level is considered as the reference, and the member switch licenses are compared against it. If there is a mismatch, the active switch with the syslog message “ license mismatch error” indicates that the stacking was unsuccessful.
Q. How is a “ license mismatch error” fixed in a Cisco Catalyst 3850 stack?
A. The license level of the mismatch stack member switch can be changed with the license right-to-use activate <license> all acceptEULA CLI command (entire stack should have the same wired license level) and reloaded from the active switch console. This will enable the member switch to join the stack successfully. The customer has to purchase a license before moving to a specific license level. -
Will saving a sequence file with modified variables work on all licensing levels of TestStand?
I am thinking of enabling editing of test limits for a few steps via an operator interface mechanism of some sort (popup dialog box, etc.).
If I make an API call to save the sequence file with the modified limits (as opposed to using the property export/import mechanism), will the call succeed if the end-customer has only a deployment license (no debug or dev)?
For that matter, if I *were* to use the property export mechanism via an API call from the operator interface, would that call succeed regardless of the licensing level on the target machine?
Thanks in advance...The deployment license will not allow you to save sequence files using the API. It will generate an error.
Allen P.
NI -
Hi,
Has anyone encountered this error "Cannot move selected items because the result will exceed the limit of WBS tree maximum levels"?
Please advise if there's any way around / solution to this. http://s8.postimg.org/bj900spcl/1_error.jpg
Thanks.Thank you so much MichaelRidino!
-
Unable to license Office 365 ProPlus when customized at the application level
It has long been claimed that Office 365 ProPlus can only be installed as one single package, and that Click-to-Run is not customizable at the application level. Microsoft lists the following at
http://technet.microsoft.com/en-us/library/jj839718.aspx “Office 365 ProPlus installs as one package. This means you can't choose to deploy Word and PowerPoint to users, but not Access.
If you don’t want users to run Access, you can customize the installation by using App-V. You can also use AppLocker to prevent users from starting certain Office applications.”
Can anyone then explain the purpose of the additional product ID’s specified in the following kb article:
http://support.microsoft.com/kb/2842297
Using the product ID’s listed here, I set the Configuration.xml file to selectively install only four Office products, which included Access, Excel, PowerPoint and Word. In this example, I removed the Product ID O365ProPlusRetail and instead just included
the Product ID’s for the individual applications we wanted to install.
<Configuration>
<Add OfficeClientEdition="32">
<Product ID="AccessRetail" >
<Language ID="en-us" />
</Product>
<Product ID="ExcelRetail" >
<Language ID="en-us" />
</Product>
<Product ID="PowerPointRetail" >
<Language ID="en-us" />
</Product>
<Product ID="WordRetail" >
<Language ID="en-us" />
</Product>
</Add>
<Updates Enabled="TRUE" />
<Display Level="None" AcceptEULA="TRUE" />
<Logging Name="OfficeSetup.txt" Path="%temp%" />
</Configuration>
Given what I had read throughout multiple areas of documentation, especially the line that mentions, “Click-to-Run is not customizable at the application level,” I was surprised and excited to see that the click to run installer only installed the applications
that I specified.
Using the Configuration.xml file I specified above, I was able to complete a custom install of Office 365 ProPlus, and included only programs that I wanted to have installed.
The issue comes when you go to license the software. I can launch any of the individual programs without issue, but I am unable to complete the process of activating the license.
For example, see below where I have launched Word, entered my account information and attempted to activate. Everything has worked fine up to this point, but I am told that I cannot activate because the product is not installed. It seems that
my custom install has prevented needed information from being added to my system to allow for the activation wizard to detect the presence of the installed Office software and to activate appropriately.
Can anyone from Microsoft comment on this? Is there any way possible to proceed given my configurations? If not, what is the purpose of
http://support.microsoft.com/kb/2842297 ?
In what case would you actually be able to use the additional product IDs? (AccessRetail, ExcelRetail, WordRetail, etc.)Whilst I don't work for MS, I have a few thoughts on this..
The documentation refers to the use of ODT for customisation, but that is mainly for customising the install-time aspects and the update sources, not the resultant feature state.
For controlling feature state, either AppLocker of re-packaging/sequencing via App-V is suggested.
KB2842297 mentions the products that ODT will "recognise" for the purposes of "customisation", but doesn't really detail how nor why.
C2R, as it is a pre-packaged sequenced output, is intended to be consumed as-is, by the vast majority.
Re-packaging/sequencing of a complex product such as Office isn't for the faint of heart (and to be honest, the installers for Office have long been a complex topic over many years)
MS have stated for many years that the individual component applications of the Office suites, are not permitted to be broken up out of the suite, for license compliance.
e.g. If you install OfficeProPlus, and via customisation, disable or do-not-install specific component apps, you must hold a license for the relevant suite (ProPlus in this example).
Even if you re-compose the resultant installed apps, such that only those apps that would equate to OfficeStd, because you installed ProPlus, it is a ProPlus license that you must hold.
Similarly, if you were to install individual apps, composing a feature-equivalent result to ProPlus, and "functionally" have the same set of apps that ProPlus would give you, holding a license for ProPlus is not sufficient, becuase it is not ProPlus
that you have installed.
So, when you modified the configuration XML, and downloaded and installed "WordRetail" + "ExcelRetail" etc, this is not equivalent to ProPlus (neither from an installed-product perspective, nor from a licensing perspective).
It seems to me, that your license (as recorded/represented in your MS account) is finding that you have products installed for which you don't hold a license.
And, that the license that you do hold, is not a match for the products you are trying to activate.
In years gone by, MS did make available individual products (e.g. Word, Excel etc) for sale.
I don't know if MS continue do make individual apps, in C2R form, available for sale, but the Office product team have created ODT in such a way that ODT can cater for them.
Perhaps in some global markets, or possibly in the future, MS might make those individual products available in C2R form.
So I'm not all that surprised, based on nothing more than previous experience (sprinkled with some assumption and theory), that you've found some interesting, slightly-mystifying things ;)
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!) -
Exceeded the number of users allowed by license
I'm getting this error at the bottom of every page:
"Exceeded the number of users allowed by license"
This is a Vibe 3.3 install, on the pre-made downloadable Vibe virtual
machine from Novell's site. I have the 10-user license, and have 6
local users created in the system, in addition to the default "admin"
user. These are all local users, not LDAP users. I have made, and
deleted, a few other local users previously while testing, but currently
only have the 6 users.
I have followed TID 7009041 to reindex the system, but that has not
freed up any licenses. A license report shows the following:
Novell Vibe 3.3.0License Report: May 13, 2013 9:28 AM
Current License
Product Title: Novell Vibe (3.3)
Key uid: Vibe10UserNoGuest-001
Key Issued: May 24, 2011
Effective: May 24, 2011 - Jan 1, 2500
Allowed number of registered users: 10
Allowed number of external users: Not restricted by the software. Read
your contract to see how many users your license allows.
Report on Activity Between May 1, 2013 1:28 PM and May 13, 2013 1:28 PM
Current Active User Count: 8
Date Local Users Users Synchronized from LDAP Users Who Used
Vibe During the Previous 365 Days Checksum
May 2, 2013 8 0 5 0
May 3, 2013 8 0 5 0
May 4, 2013 8 0 5 0
May 5, 2013 8 0 5 0
May 6, 2013 8 0 5 0
May 7, 2013 8 0 5 0
May 8, 2013 9 0 6 0
May 9, 2013 9 0 6 0
May 10, 2013 10 0 7 0
May 11, 2013 10 0 7 0
May 12, 2013 10 0 7 0
May 13, 2013 11 0 8 0
May 13, 2013 11 0 8 0
May 13, 2013 11 0 8 0
May 13, 2013 11 0 8 0
May 13, 2013 11 0 8 0
May 13, 2013 11 0 8 0
I'm not sure why local users is showing up as 11, because if I go in to
delete users I only see the 6 currently in the system. Is there some
way to look for "stuck" accounts that were deleted, but for some reason
were not actually purged from the system?
Thanks,
-Greg
former e-mail for posting:
[email protected]Any news on this? I'd like to role something out into production in the
next two weeks, but I'd like this error message to be gone. I currently
have only 8 user accounts in the system (which includes the "admin"
account).
Thanks,
-Greg
On 5/13/2013 10:24 AM, Simon Flood wrote:
> On 13/05/2013 14:31, Greg N. wrote:
>
>> I'm getting this error at the bottom of every page:
>>
>> "Exceeded the number of users allowed by license"
>>
>> This is a Vibe 3.3 install, on the pre-made downloadable Vibe virtual
>> machine from Novell's site. I have the 10-user license, and have 6
>> local users created in the system, in addition to the default "admin"
>> user. These are all local users, not LDAP users. I have made, and
>> deleted, a few other local users previously while testing, but currently
>> only have the 6 users.
>>
>> I have followed TID 7009041 to reindex the system, but that has not
>> freed up any licenses. A license report shows the following:
>>
>> Novell Vibe 3.3.0License Report: May 13, 2013 9:28 AM
>>
>> Current License
>> Product Title: Novell Vibe (3.3)
>> Key uid: Vibe10UserNoGuest-001
>> Key Issued: May 24, 2011
>> Effective: May 24, 2011 - Jan 1, 2500
>> Allowed number of registered users: 10
>> Allowed number of external users: Not restricted by the software.
>> Read your contract to see how many users your license allows.
>>
>>
>> Report on Activity Between May 1, 2013 1:28 PM and May 13, 2013 1:28 PM
>> Current Active User Count: 8
>>
>> Date Local Users Users Synchronized from LDAP Users
>> Who Used Vibe During the Previous 365 Days Checksum
>> May 2, 2013 8 0 5 0
>> May 3, 2013 8 0 5 0
>> May 4, 2013 8 0 5 0
>> May 5, 2013 8 0 5 0
>> May 6, 2013 8 0 5 0
>> May 7, 2013 8 0 5 0
>> May 8, 2013 9 0 6 0
>> May 9, 2013 9 0 6 0
>> May 10, 2013 10 0 7 0
>> May 11, 2013 10 0 7 0
>> May 12, 2013 10 0 7 0
>> May 13, 2013 11 0 8 0
>> May 13, 2013 11 0 8 0
>> May 13, 2013 11 0 8 0
>> May 13, 2013 11 0 8 0
>> May 13, 2013 11 0 8 0
>> May 13, 2013 11 0 8 0
>>
>>
>> I'm not sure why local users is showing up as 11, because if I go in to
>> delete users I only see the 6 currently in the system. Is there some
>> way to look for "stuck" accounts that were deleted, but for some reason
>> were not actually purged from the system?
>
> Unfortunately the 10-user license doesn't take account of some built-in
> system accounts. Let me ask Novell.
>
> HTH.
former e-mail for posting:
[email protected] -
[BlazeDS]Error serialization exceeds the max collection object nest level of '15'.
I am getting the following error when I try to import large data from server to client. I am not able to find where I can change the settings to handle more data.
[BlazeDS]Error serialization exceeds the max collection object nest level of '15'.
flex.messaging.io.SerializationException: Error serialization exceeds the max collection object nest level of '15'.
at flex.messaging.io.amf.AmfIO.increaseNestCollectionLevel(AmfIO.java:142)
at flex.messaging.io.amf.Amf3Input.readObjectOneLevelDown(Amf3Input.java:753)
at flex.messaging.io.amf.Amf3Input.readArray(Amf3Input.java:358)
at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:156)
at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
at flex.messaging.io.ArrayCollection.readExternal(ArrayCollection.java:87)
at flex.messaging.io.amf.Amf3Input.readExternalizable(Amf3Input.java:493)
at flex.messaging.io.amf.Amf3Input.readScriptObject(Amf3Input.java:420)
at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:152)
at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
at flex.messaging.io.amf.Amf3Input.readObjectOneLevelDown(Amf3Input.java:754)
at flex.messaging.io.amf.Amf3Input.readScriptObject(Amf3Input.java:439)
at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:152)
at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
at flex.messaging.io.amf.Amf3Input.readObjectOneLevelDown(Amf3Input.java:754)
at flex.messaging.io.amf.Amf3Input.readScriptObject(Amf3Input.java:453)
at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:152)
at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
at flex.messaging.io.amf.Amf3Input.readObjectOneLevelDown(Amf3Input.java:754)
at flex.messaging.io.amf.Amf3Input.readArray(Amf3Input.java:358)
at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:156)
at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
at flex.messaging.io.ArrayCollection.readExternal(ArrayCollection.java:87)
at flex.messaging.io.amf.Amf3Input.readExternalizable(Amf3Input.java:493)
at flex.messaging.io.amf.Amf3Input.readScriptObject(Amf3Input.java:420)
at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:152)
at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
at flex.messaging.io.amf.Amf3Input.readObjectOneLevelDown(Amf3Input.java:754)
at flex.messaging.io.amf.Amf3Input.readScriptObject(Amf3Input.java:439)
at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:152)
at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
at flex.messaging.io.amf.Amf3Input.readObjectOneLevelDown(Amf3Input.java:754)
at flex.messaging.io.amf.Amf3Input.readScriptObject(Amf3Input.java:453)
at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:152)
at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
at flex.messaging.io.amf.Amf3Input.readObjectOneLevelDown(Amf3Input.java:754)
at flex.messaging.io.amf.Amf3Input.readArray(Amf3Input.java:358)
at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:156)
at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
at flex.messaging.io.ArrayCollection.readExternal(ArrayCollection.java:87)
at flex.messaging.io.amf.Amf3Input.readExternalizable(Amf3Input.java:493)
at flex.messaging.io.amf.Amf3Input.readScriptObject(Amf3Input.java:420)
at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:152)
at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
at flex.messaging.io.amf.Amf3Input.readObjectOneLevelDown(Amf3Input.java:754)I am getting the following error when I try to import large data from server to client. I am not able to find where I can change the settings to handle more data.
[BlazeDS]Error serialization exceeds the max collection object nest level of '15'.
flex.messaging.io.SerializationException: Error serialization exceeds the max collection object nest level of '15'.
at flex.messaging.io.amf.AmfIO.increaseNestCollectionLevel(AmfIO.java:142)
at flex.messaging.io.amf.Amf3Input.readObjectOneLevelDown(Amf3Input.java:753)
at flex.messaging.io.amf.Amf3Input.readArray(Amf3Input.java:358)
at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:156)
at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
at flex.messaging.io.ArrayCollection.readExternal(ArrayCollection.java:87)
at flex.messaging.io.amf.Amf3Input.readExternalizable(Amf3Input.java:493)
at flex.messaging.io.amf.Amf3Input.readScriptObject(Amf3Input.java:420)
at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:152)
at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
at flex.messaging.io.amf.Amf3Input.readObjectOneLevelDown(Amf3Input.java:754)
at flex.messaging.io.amf.Amf3Input.readScriptObject(Amf3Input.java:439)
at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:152)
at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
at flex.messaging.io.amf.Amf3Input.readObjectOneLevelDown(Amf3Input.java:754)
at flex.messaging.io.amf.Amf3Input.readScriptObject(Amf3Input.java:453)
at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:152)
at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
at flex.messaging.io.amf.Amf3Input.readObjectOneLevelDown(Amf3Input.java:754)
at flex.messaging.io.amf.Amf3Input.readArray(Amf3Input.java:358)
at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:156)
at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
at flex.messaging.io.ArrayCollection.readExternal(ArrayCollection.java:87)
at flex.messaging.io.amf.Amf3Input.readExternalizable(Amf3Input.java:493)
at flex.messaging.io.amf.Amf3Input.readScriptObject(Amf3Input.java:420)
at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:152)
at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
at flex.messaging.io.amf.Amf3Input.readObjectOneLevelDown(Amf3Input.java:754)
at flex.messaging.io.amf.Amf3Input.readScriptObject(Amf3Input.java:439)
at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:152)
at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
at flex.messaging.io.amf.Amf3Input.readObjectOneLevelDown(Amf3Input.java:754)
at flex.messaging.io.amf.Amf3Input.readScriptObject(Amf3Input.java:453)
at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:152)
at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
at flex.messaging.io.amf.Amf3Input.readObjectOneLevelDown(Amf3Input.java:754)
at flex.messaging.io.amf.Amf3Input.readArray(Amf3Input.java:358)
at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:156)
at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
at flex.messaging.io.ArrayCollection.readExternal(ArrayCollection.java:87)
at flex.messaging.io.amf.Amf3Input.readExternalizable(Amf3Input.java:493)
at flex.messaging.io.amf.Amf3Input.readScriptObject(Amf3Input.java:420)
at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:152)
at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
at flex.messaging.io.amf.Amf3Input.readObjectOneLevelDown(Amf3Input.java:754) -
What does the message "You have exceeded your license" mean? I cannot open aperture on my computer
I installed aperture on my lap top. I now tried to install it on my Mac Pro. I got a message saying I have exceeded my license, but it let me install anyway. Now there is a grey circle with a line thru the app icon and I cannot open. Can someone help me?
We have the boxed version
The licence for the boxed version allows two installations, one on a Desktop Mac and one on a portable Mac.
But when you install the boxed retail version on a Mavericks system and update it to Aperture 3.5.1, your licence for the retail version will be converted to a licence from the App Store and tied to your Apple ID. After that, your retail version registration key is no longer valid.
You have to download Aperture from the App Store and use the AppleID, you used when you updated Aperture to 3.5.1.
Do you have updated Aperture to 3.5.1 on one of your Macs? Then delete the crossed-our Aperture on your MacPro and launch the AppStore. Sign in with the same AppleID you used on your laptop. Open the "Purchased" tab and look for Aperture. Is it there and is the "Install" button available? -
I am getting this alert in vrops. any idea why? The license I used is the vcloud standard license
I had the same Notification.
What I ended up doing was removing the "Product Licensing" group and the creating a new with the vCloud licenses attached. Then proceeded to add any and all things I could and ended up using 0 licenses.
Very odd. Using 90 before and after adding everything I could find in the membership configuration I did not use any licenses anymore. -
Every few days we see two dialogs with the following messages:
Dialog 1, title: Check for Licensing Compliance is Incomplete
The server did not finish checking the license compliance. If the server is joined to a domain, make sure that the server can connect to a domain controller.
Dialog 2, title: Check for Licensing Compliance is Incomplete
The server did not finish checking the license compliance. If the server is joined to a domain, make sure that the server can connect to a domain controller. If the license compliance check cannot be completed, the server will automatically shut
down in 8 day(s) 23 hour(s) 0 minute(s).
The server is not (and never has been) joined to a domain or had any DC roles installed. In fact its still connected to the default Workgroup.
The server was configured in our office and never showed this message until it was installed on site. The main difference from what I can see is that when installed on site it was given a static IP address and does not have any DNS settings in the network
adapter properties.
I have scoured a number of forums on this error but in almost every other instance of this error message the servers are connected to a Domain Controller and the solutions generally are linked to dis-joining and rejoining the domain. Unfortunately this is
not an option for this scenario.
I initially thought that adding some relevant DNS server IP address may resolve the issue, however, we have the exact same model server configured exactly the same running at a different site that does not experience this problem. This server also has no
DNS server configured.
I have seen a post that suggests turning off the servers "Foundation Checking", but I'm unsure how to do this.Thanks for your response Vivian.
I can confirm that this server is not (and never has been) a member of any active directory, it is configured as a Workgroup server. It was initially configured on a network that does have an active directory, but was never joined to it. During that time it
never displayed these messages.
The server was moved into production on a different site and network and setup with a static IP address.The site network does have its own active directory but the server was not joined to it. It is whilst on this new network that these messages began.
Since my original post DNS servers have been added and the Microsoft activation has been verified, however, the messages are still appearing.
There are only 2 user accounts configured on this server. The local admin account and another local admin user.
The remote desktop services roles have been installed but not yet configured. I don't think that has any bearing on this scenario though.
The description of this error in the above "Introduction to Windows Server 2012 Foundation" link states:
This error occurs when the server cannot finish checking the requirements for the root domain, forest trust configuration, or both. It usually happens when the server cannot connect to a domain controller. If the situation persists, the server will
shut down 10 days after the first time the compliance check failed. Each time this error message occurs, it will state the actual time remaining before the server will shut down. If you restart the server after it has shut down because of non-compliance, the
server will shut itself down again in 3 days.
The above description leads me to the following question - In a Workgroup environment, does the server still try to contact a domain controller to establish a level of trust? If this is the case could it be that the server can no longer see the initial DC
on its new network and this is what is triggering the messages?
Am I clutching at straws here? -
ORA-22290: operation would exceed the maximum number of opened files or LOB
i am getting this error in a procedure.
ORA-22290: operation would exceed the maximum number of opened files or LOBs
22290, 00000, "operation would exceed the maximum number of opened files or LOBs"
// *Cause: The number of open files or LOBs has reached the maximum limit.
// *Action: Close some of the opened files or LOBs and retry the operation.
NAME TYPE VALUE
session_max_open_files integer 10
Procuedure:
CREATE OR REPLACE PROCEDURE WMSOWN."PROC_WMS_XML_READ"
P_EVENT_KEY IN VARCHAR2,
X_STATUS_MSG OUT VARCHAR2,
X_STATUS OUT NUMBER
)AS
l_parser dbms_xmlparser.Parser;
domdoc xmldom.DOMDocument;
nodelist XMLDOM.DOMNODELIST;
node XMLDOM.DOMNODE;
n_child XMLDOM.DOMNODE;
elements XMLDOM.DOMELEMENT;
name_node_map XMLDOM.DOMNAMEDNODEMAP;
parent_seg varchar2(4000);
tag_name_bkp varchar2(4000); -- LOOK OUT BRAD IS CODING AGAIN
chile_seg VARCHAR2(4000);
p_seg VARCHAR2(4000);
p_seg1 VARCHAR2(4000);
p_seg2 VARCHAR2(30);
p_int_name VARCHAR2(50);
col_value VARCHAR2(100):=NULL;
len1 NUMBER;
cnt NUMBER;
seg_id_bkp NUMBER; -- LOOK OUT BRAD IS CODING AGAIN
sequence_bkp NUMBER; -- LOOK OUT BRAD IS CODING AGAIN
prev_sequence NUMBER; -- LOOK OUT BRAD IS CODING AGAIN
prev_seq_set VARCHAR2(3); --brad coding
parent_id number; ---brad coding
valid_seg NUMBER; -- LOOK OUT BRAD IS CODING AGAIN
data_status VARCHAR2(10);
v_main_seg VARCHAR2(50);
v_seq_no NUMBER;
V_CLOBLOCATOR CLOB;
V_FILELOCATOR BFILE;
v_amount_to_load NUMBER;
dest_offset NUMBER := 1;
src_offset NUMBER := 1;
lang_context NUMBER := DBMS_LOB.DEFAULT_LANG_CTX;
warning NUMBER;
v_event_name USR_OUB_FILE_PROCESS_DETAILS.EVENT_NAME%TYPE;
v_file_name USR_OUB_FILE_PROCESS_DETAILS.FILE_NAME%TYPE;
DIRECTORY_PATH_INVALID EXCEPTION;
PRAGMA EXCEPTION_INIT(DIRECTORY_PATH_INVALID,-22285);
NO_PRIVILEGES EXCEPTION;
PRAGMA EXCEPTION_INIT(NO_PRIVILEGES,-22286);
INVALID_DIRECTORY EXCEPTION;
PRAGMA EXCEPTION_INIT(INVALID_DIRECTORY,-22287);
FILE_NOT_FOUND EXCEPTION;
PRAGMA EXCEPTION_INIT(FILE_NOT_FOUND,-22289);
P_DIRECTORY VARCHAR2(50) :='WMS_XML_DIR_OUB';
v_whid poldat_view.wh_id%type;
BEGIN
--NAME : PROC_WMS_XML_READ.PLS
--DESCRIPTION :
-- Procedure PROC_WMS_XML_READ search XML files from remote location.
-- Open,Parse and Read XML files. Store all XML values into tables.
-- Developed by Dharmesh Patidar(jw782)
-- History: New condition is added i.e. p_seg:=parent_seg to maintain PARENT and CHILD relationship
-- by Vishwanath Dubey(jl246) on 17-June-2011
-- BRAD_XML_DEBUG table removed for CLEANING Activity by DHARMESH PATIDAR(JW782) ON 29-JUNE-2011.
/*BLOCK FOR CAPTURING EVENT NAME BASED ON EVENT ID START*/
BEGIN
SELECT event_name,file_name,WAREHOUSE_ID
INTO v_event_name, v_file_name,v_whid
FROM usr_oub_file_process_details
WHERE event_id=p_event_key
AND process_flag='U';
EXCEPTION
WHEN NO_DATA_FOUND THEN
x_status_msg:=SQLCODE||':'||' Error while selecting event name and event id in Procedure PROC_WMS_XML_READ : Record is not available in USR_OUB_FILE_PROCESS_DETAILS table for event id '|| P_EVENT_KEY;
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
WHEN TOO_MANY_ROWS THEN
x_status_msg:=SQLCODE||':'||' Error while selecting event name and event id in Procedure PROC_WMS_XML_READ : More than one Records found in USR_OUB_FILE_PROCESS_DETAILS table for event id '|| P_EVENT_KEY;
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
WHEN VALUE_ERROR THEN
x_status_msg:=SQLCODE||':'||' Error while selecting event name and event id in Procedure PROC_WMS_XML_READ : Varibale length is small or data type mismatch while selecting event id and event name in USR_OUB_FILE_PROCESS_DETAILS table for event id '|| P_EVENT_KEY;
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
WHEN OTHERS THEN
x_status_msg:=SQLCODE||':'||'Error in Procedure PROC_WMS_XML_READ while selecting event name and event id ';
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
END;
/*BLOCK FOR CAPTURING EVENT NAME BASED ON EVENT ID END*/
/*LOGIC TO READ XML FROM REMOTE LOCATION START*/
DBMS_LOB.CREATETEMPORARY(V_CLOBLOCATOR, TRUE);
V_FILELOCATOR := BFILENAME(P_DIRECTORY,V_FILE_NAME);
DBMS_LOB.OPEN(V_FILELOCATOR,DBMS_LOB.FILE_READONLY);
V_AMOUNT_TO_LOAD := DBMS_LOB.GETLENGTH(V_FILELOCATOR);
DBMS_LOB.LOADCLOBFROMFILE(V_CLOBLOCATOR,
V_FILELOCATOR ,
V_AMOUNT_TO_LOAD,
DEST_OFFSET,
SRC_OFFSET,
0,
LANG_CONTEXT,
WARNING);
dbms_lob.close(V_FILELOCATOR);
/*LOGIC TO READ XML FROM REMOTE LOCATION END*/
/*Temporary Code to help with debug Clear the table before populating it with new data*/
--delete table BRAD_XML_DEBUG;
cnt:=1;
seg_id_bkp:=0;
data_status:='N';
v_seq_no:=0;
prev_seq_set:='NO';
/*create new parser.*/
l_parser := dbms_xmlparser.newParser;
dbms_xmlparser.parseClob(l_parser, replace(V_CLOBLOCATOR,'&','1x2x3x4x5'));
/*Parse the document and create a new DOM document.*/
domdoc :=dbms_xmlparser.getDocument(l_parser);
/* get all elements in the DOM*/
nodelist := XMLDOM.getElementsByTagName(DOMDoc, '*');
len1 := XMLDOM.getLength(nodelist);
/* loop through elements of the DOM */
FOR j in 1..len1-1 LOOP --MAIN LOOP START
BEGIN
/*below sql will fetch Node from table to travel xml data*/
BEGIN
SELECT int_name,tag_name
INTO p_int_name, p_seg1
FROM usr_wms_tag_det
WHERE int_name=v_event_name
AND seq_no =cnt;
EXCEPTION
--PLEASE DO NOT HANDLE ANY EXCEPTION APART MENTIONED BELOW
WHEN OTHERS THEN
NULL;
END;
IF cnt=1 THEN
v_main_seg:=p_seg1;
END IF;
EXCEPTION
--PLEASE DO NOT HANDLE ANY EXCEPTION APART MENTIONED BELOW
WHEN no_data_found THEN
null;
WHEN OTHERS THEN
x_status_msg:=SQLCODE||':'||'Error in Procedure PROC_WMS_XML_READ while selecting interface name and tag name'||sqlerrm;
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
END;
/*LOGICS TO READ XML START*/
node:=XMLDOM.item(nodelist, j);
elements:=XMLDOM.makeElement(node);
parent_seg:=(xmldom.getTagName(elements));
tag_name_bkp:=(xmldom.getTagName(elements));
name_node_map:=xmldom.getAttributes(node);
n_child:=xmldom.getFirstChild(node);
col_value:=xmldom.getNodeValue(n_child);
/*get the sequence number from the interface hierarchy table */
SELECT count(1)
INTO valid_seg
FROM usr_wms_tag_det
WHERE int_name=v_event_name
AND tag_name = tag_name_bkp;
if valid_seg>0 then
begin
SELECT seq_no
INTO sequence_bkp
FROM usr_wms_tag_det
WHERE int_name=v_event_name
AND tag_name = tag_name_bkp;
seg_id_bkp:=seg_id_bkp+1;
p_seg:=parent_seg;--Modified by Vishwanath Dubey dated 16-jun-2011
end;
end if;
if prev_seq_set = 'NO' then
begin
prev_sequence := sequence_bkp;
prev_seq_set := 'YES';
end;
end if;
if sequence_bkp < prev_sequence then --you just moved up level(s) in the message structure
begin
select max(seg_id)
into parent_id
from usr_wms_global_xml_det
where seg_sequence = sequence_bkp-1;
prev_sequence := sequence_bkp;
end;
end if;
if sequence_bkp > prev_sequence then --you just moved down a level in the message structure
parent_id := seg_id_bkp-1;
prev_sequence := sequence_bkp;
end if;
/*end getting the hierarchy table sequence */
/*LOGICS TO READ XML END */
IF (parent_seg =p_seg1) or (parent_seg=p_seg2) THEN
if parent_seg=v_main_seg then
v_seq_no:=v_seq_no+1;
end if;
BEGIN
/* INSERTING DATA LOGICS TO READ XML END */
INSERT INTO usr_wms_global_xml_det values(p_int_name,tag_name_bkp,parent_seg,seg_id_bkp,sequence_bkp,parent_id,'','','',J,v_seq_no,data_status,cnt);
EXCEPTION
WHEN OTHERS THEN
x_status_msg:=SQLCODE||' : Error in Procedure PROC_WMS_XML_READ while inserting records in USR_WMS_GLOBAL_XML_DET table for interface name and parent segment '||P_INT_NAME||','||PARENT_SEG;
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
END ;
p_seg:=parent_seg;
p_seg2:=P_SEG1;
cnt:=cnt+1;
ELSE
chile_seg:=parent_seg;
BEGIN
/* INSERTING DATA LOGICS TO READ XML END */
INSERT INTO usr_wms_global_xml_det values(p_int_name,tag_name_bkp,p_seg,seg_id_bkp,sequence_bkp,parent_id,'',chile_seg,replace(TRIM(Col_Value),'1x2x3x4x5','&'),J,v_seq_no,data_status,cnt);
EXCEPTION
WHEN OTHERS THEN
x_status_msg:=SQLCODE||' : Error in Procedure PROC_WMS_XML_READ while inserting records in USR_WMS_GLOBAL_XML_DET table for interface name and parent segment '||P_INT_NAME||','||PARENT_SEG;
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
END;
END IF;
END LOOP; --MAIN LOOP END
dbms_xmldom.freeDocument(DOMDoc);
x_status:=0;
EXCEPTION
WHEN DIRECTORY_PATH_INVALID THEN
x_status_msg:=SQLCODE||' : Error in Procedure PROC_WMS_XML_READ DIRECTORY PATH IS INVALID';
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
WHEN FILE_NOT_FOUND THEN
x_status_msg:=SQLCODE||' : Error in Procedure PROC_WMS_XML_READ INVALID XML FILE NAME OR FILE DOES NOT EXISTS';
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
WHEN NO_PRIVILEGES THEN
x_status_msg:=SQLCODE||' : Error in Procedure PROC_WMS_XML_READ Insufficient privileges on file or directory NAME- '||p_directory||' to perform FILEOPEN operation.';
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
WHEN OTHERS THEN
x_status_msg:=SQLCODE||' : Error in Procedure PROC_WMS_XML_READ '|| SQLERRM;
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
dbms_xmlparser.freeParser(l_parser);
dbms_xmldom.freeDocument(DOMDoc);
RETURN;
END PROC_WMS_XML_READ;
Edited by: user13427480 on Feb 8, 2013 7:08 PMwhen you post sql statement use also similar threads :
ORA-22290: operation would exceed the maximum number of opened files or LOB
https://kr.forums.oracle.com/forums/thread.jspa?messageID=10842417
Maybe you are looking for
-
How to call multiple request to CRM and R/3 without BPM
Hi all I have a scenario where a SOAP request will come to XI via webservice I then have to call an interface mapping which has Java mapping in it(the java code is basically calling an RFC in CRM) - then i'll receive the response of interface mapping
-
Problems downloading Lion 10.7.4
I'm trying to download Lion 10.7.4. I've tried 3 times. The Lion icon on my dashboard does nothing, just has a msg that says "waiting". Has anyone else had this download problem?
-
Problem with a wrapper program.
Hi all, we are facing problem with a wrapper program,through which we are calling three different xml reports. when we independently submit these xml reports thorugh front end . All the three programs run successfully & gives the desired output. but
-
Hi I have SLES11-x64 + Teaming 2.1. Default Landing Page code is UTF-8, can I change it?
-
hello, there are some photos i want to keep stored on my camera for a while, but is there any way round not importing these same ones over and over again to iphoto each time i import the new photos i have taken? i think its probably clogging up the l