[ASR9K nvEdge]How to decide who will be primary DSC after cluster rebuild?

Hi
I have a question about ASR9K nvEdge cluster.
Normally,when the EOBC & IRL link are disconnected, the cluster will enter into "split node" status.
each rack will think itself is primary DSC.
My question is that after the EOBC & IRL are reconneted(cluster rebuild), whick one (rack0 or rack1) will be the primary DSC? and why?
Thanks,
Tom

Yes that's perfect thanks for the details. This is the expected behavior. In fact this is how we will be achieving nv ssu. Which is a new feature on the roadmap. What happens here is rack0 goes down and it sends out beacons while booting on eobc(your step 5) finds that there is a responding DSC (Rack1) gets the sw from rack 1 and reboots and joins the cluster as nonDSC.
Have you had a chance to review the nv edge deployment guide? It has these details.
Eddie.
Sent from Cisco Technical Support iPhone App

Similar Messages

[All Platforms][Playlists] Decide who should have the right to add/remove songs on your playlist

I got a playlist which i share with a couple of friends and everyone can add/remove songs.But i wanna spread this playlist but cant do that because people love to deleted the whole list.The solution to this is to somehow decide who will have the right to change songs.Just a little idea but shouldn't be impossible to do, in worst case i'll just make two different playlists.(Sorry for bad grammar etc.)

Updated: 2015-07-17Hello and thanks for the feedback!
A similar idea has also been suggested here:
https://community.spotify.com/t5/Live-Ideas/Owner-controls-collaboration-playlist/idi-p/49229
Add your kudos and comments there please! ;)

Anyone know how to reach someone in customer service who will not out and out LIE to us?

Just so frustrated right now... in the near week since my husband's iPhone was stolen, we have spoken to four different reps and three so-called supervisors. Each one has either made the problem worse or actually lied to us. Does anyone know how to reach someone at Verizon who will help us? We have three iPhones with Verizon and are ready to leave for AT&T.
So far, this is what we've had:
1. As we were tracking the phone with the police to get it back, Verizon tech support advised us to wipe the phone because we'd still be able to track it. WRONG. Phone lost forever. Verizon clearly does not understand what "wipe" means on MobileMe. What they should have said is, "We don't know for sure, so don't wipe it."
2. Rep transferring my husband's phone number to a backup handset transferred MY number to that phone, deactivated MY iPhone and reported it as stolen. When they were trying to fix it, we were assured that our unlimited data plan would not be affected. WRONG. Reps are now refusing to give it back.
3. Next rep advised us to get insurance on the phones because if anything happens, they are replaced for free. WRONG. $199 deductible, which we found out from the next rep.
4. The supervisor we spoke to yesterday said she would pull the tapes from the call center, review them to make sure that IT gave us the wrong information, and then call us back the next day with a discounted rate on a new iPhone. She gave us her name and direct number... both of which were bogus. The number goes to a media specialist at some public school. Subsequent reps have told us that there is no way anyone at Verizon would say that.
5. We have been promised three times that a supervisor would call us within 24 hours... almost a week later, no calls from anyone.
So if anyone has any leads on how to speak to someone who will make this nightmare go away, please, please, let me know. Thank you.

feochadan wrote:
Thanks to this board, my problems were solved! This thread can probably be deleted.
The point of this board, being a peer to peer forum, is so that people can learn how to resolve issues that others have already gone through. Please let us know how it was resolved so that others in the future with the same issues can be assisted.

Who will decide...

Hello,
In Development, who will decide which mapping to use XSLT ,Java or ABAP ..In which different scenarios these mappings are Appropriate pls give examples for each

See satya,
as u know there r 4 types of mapping possible in XI.
1)Graphical
2)JAVA
3)XSLT
4)ABAP
generally most of the time Graphical mappings are considerd as....thats the simplest of all.Sometimes some mappings are not possible using graphical mapping so u have to go for Java mapping or XSLT mapping or ABAP...
In some cases java mappings are useful...suppose u want to create some dynamic target node depending upon the source nodes...u can easily achive it with Java mapping....
u can see some scenarios where java mapping are used
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-ii /people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-iii /people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping /people/amol.joshi2/blog/2006/03/10/think-objects-when-creating-java-mappings
We can use XSLT mapping
When the required output is other than XML like Text, Html or XHTML (html displayed as XML)
When default namespace coming from graphical mapping is not required or is to be changed as per requirements.
When data is to be filtered based on certain fields (considering File as source)
When data is to be sorted based on certain field (considering File as source)
When data is to be grouped based on certain field (considering File as source)
u can see Some scenarios
/people/sap.user72/blog/2005/03/15/using-xslt-mapping-in-a-ccbpm-scenario
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
ABAP mapping are used in very rare cases...
look @ this
/people/sameer.shadab/blog/2005/09/29/testing-abap-mapping
regards
biplab

What is utp and who will do this ?how you do unit testing?

Hi....
he asked me like this
1...what is utp and who will do this ?how you do unit testing?
thanks and regards,
k.swaminath reddy.

Hi Swaminath,
Adding to what Sandhya told..When the huge work is diveded by units, each unit is assigned to a Developer.After complition of the assigned work Developer has to do testing that object by seeing that Unit Plan or Creating Unit Plan.
Regards,
Ameer Baba.

I WILL SEND 10 USD IPOD CERTIFICATE GIFT TO THE FIRST WHO WILL SHOW ME HOW

HELLO!! I WILL SEND 10 (TEN USD) USD IPOD CERTIFICATE GIFT TO THE FIRST WHO WILL SHOW ME HOW TO EXPORT VIDEO WITH QTIME PRO 7 TO THE IPOD WITH THE SOUND!!!!! IF I WILL TRY AND IT WILL WORK I WILL SEND U THE GIFT....
THANKS AND SEND ME REPLY TO [email protected]

Ok. First off.
1)Open up the video that you want to convert in QT.
2)Go to view, Movie info.
3)Check the formatting of the video. If it is MPEG1 or 2 Muxed(something like that), then when you try and convert it, you will only get the Video, no audio. It has something to do with in that format it is all one thing or something. I dont know for sure.
But if it is something else that MPEG1 or 2 Muxed, then continue
4)Go up to File(I believe it is), and select Export(If you cant select export, then connect your Ipod, then you should be able to select export)
5)Select the spot you want yor video to be saved. IE: Desktop, a folder...
6)Select the formatting that you want it. Most likely "Ipod 340x280(I think those are the numbers)".
7)Hit "save" or what ever the button is, then let it do its magic over night, and vwhala! A video perfect for your Ipod.

Firefox continues to crash unexpectedly. The report mesage suggests that the information I send will help Firefox to cure the problem but I never hear anything from them. How is someone who isn't a computer geek supposed to solve this problem?

Firefox continues to crash unexpectedly. When it does a message requests me to send a report that is supposed to help Firefox understand the problem but I never hear from them again. Just how is someone who isn't a computer geek able to understand all the detailed discussions from other users. My Firefox is completely up to date. Is there anyone who can explain what is happening in simple terms?
== Crash ID(s) ==
Application Basics Name Firefox Version 3.6.3 Profile Directory Show in Finder Installed Plugins about:plugins Build Configuration about:buildconfig Extensions Name Version Enabled ID Modified Preferences Name Value browser.history_expire_days.mirror 180 browser.places.importBookmarksHTML false browser.places.importDefaults false browser.places.leftPaneFolderId -1 browser.places.migratePostDataAnnotations false browser.places.smartBookmarksVersion 2 browser.places.updateRecentTagsUri false browser.startup.homepage http://www.google.co.uk/ browser.startup.homepage_override.mstone rv:1.9.2.3 extensions.lastAppVersion 3.6.3 network.cookie.prefsMigrated true places.last_vacuum 1273847973 print.macosx.pagesetup-2 PD94bWwgdmVyc2lvbj0iMS4wIiBlbmNvZGluZz0iVVRGLTgiPz4KPCFET0NUWVBFIHBsaXN0IFBVQkxJQyAiLS8vQXBwbGUvL0RURCBQTElTVCAxLjAvL0VO… print.print_bgcolor true print.print_bgimages true print.print_command print.print_downloadfonts true print.print_evenpages true print.print_footerleft print.print_footerright print.print_headerleft print.print_headerright print.print_in_color true print.print_margin_bottom 0.5 print.print_margin_left 0.5 print.print_margin_right 0.5 print.print_margin_top 0.5 print.print_oddpages true print.print_orientation 0 print.print_pagedelay 500 print.print_paper_data 0 print.print_paper_height 11.00 print.print_paper_size -1317362828 print.print_paper_size_type 1 print.print_paper_size_unit 0 print.print_paper_width 8.50 print.print_printer print.print_reversed false print.print_scaling 1.00 print.print_shrink_to_fit true print.print_to_file false print.print_unwriteable_margin_bottom 57 print.print_unwriteable_margin_left 25 print.print_unwriteable_margin_right 25 print.print_unwriteable_margin_top 25 privacy.sanitize.migrateFx3Prefs true security.warn_viewing_mixed false

Hi Mariah ~
It's Shaunn, the original poster. Thanks for your posting. I'm glad I'm not the only one that's having this problem.
Now that you mention it, I'm having the exact same problem on Facebook as well, when I play Family Feud.
I wish someone would investigate and post a solution to this problem. No-one from Playlist has responded, and no-one "Officially" from Firefox either.
So Mariah, I appreciate you and your post.
If you find anything out...from anywhere...would you please let me know. You can post it right here and I'll get an email from Firefox.
I'll do the same for you.
Enjoy your day and good luck.
Shaunn

Who will assign the prices for refurbished & faulty & on which basis

Dear Friends
while implementing this refurbishment process
the pricing for c2 repaired & faulty c3 who will decide & on which basis
since every time we cannot have same fault for c3 (sometimes winding burn ,sometimes bearing faulty then for all how it will have same value as c3)
& in case of c2 what about depriciation
can you focus more
Regards
chandrashekhar Ingole

Dear Vinay & thagrajan
Thanks for your reply
Now it is clear that faulty c3 has the value low which pm person will assist to mm&fi people
Regarding c2 which we be repaired but it has depriciated value as copmare to new .
But how will utlimately give in sap wherther mmor fi whose work is this exactly
I am rewarding you with points but answer to my question please
Regads
chanrda

How to decide no.Technical and Business Systems required for any senario

Hi XI experts
     I am very new to XI but it is very interesting ....
     To develop any scenario how to decide Technical systems and Business
     Systems...
     For any scenario but how to decide the systems howmany to create ?
     I had a scenario like SOAP to RFC to SOAP ? For this how to decide?
     One more like FILES to BPM to JDBC ...like
     Can any one explain me for any scenario which may include SAP
     R/3,CRM,APO,BW,JDBC,SOAP,RFC...any system.
Adv..thanks and points to all
Kiranlvs

Hi Kiran.
Ok here I will try to answer your question.
1) SOAP (Web Service) -> RFC (R/3) -> SOAP (Web Service)
a) you will need to create a Business System for R/3.
b) you will need to create a third party business system or a business service for the Web Service system.
2) File (File System) -> XI -> JDBC (Database)
a) you will need to create a third party business system or a business service for the File system.
b) you will need to create a third party business system or a business service for the Database system.
note: BPM is one of the functionality of XI so there is no need to create a BS or TS for it.
3) CRM or APO or BW (SAp Systems) -> XI -> IDoc (R/3)
a) Business System for CRM or APO or BW
b) Business System for R/3.
The bottom line is you need to create Business System for any SAP system that is part of you integration scenario or when you have to Idoc, RFC and Proxies.
If the business system already exists for the SAP system then you just need to attach your SWCV or Product to that Business System.
Regards,
Ashish

Who will give the request number for a package?

hi
who will give the request number for a package , while releasing a package in se10 or se09

Hi Shivika
Please educate me, what is a package number? What does it relate? How and from where to get the number?
The package number i refer is the service package number. The package number is being asked for when i refer the tables ESLH and ESLL.
Regards
Vijay

How to identify who made the changes to the tfs security

Hi All,
We are into a weird situation. In our environment we create groups TFS_Project admins, TFS_Contributors, TFS_buildusers, TFS_Readers in AD for every new project and added to corresponding group on the Team project level.
One of the users is a member of TFS_project admins and TFS_contributors. Next day he is not belongs to any group. Some one has been removed him from the groups.
Question: how to find, who has deleted the user from the groups.
Please help on this .. very high priority issue.
Thanks,
Rajukumar

Hello,
Go To RSPC1 give your process chain name (Go to LOG View ) there you will get Date selectin screen (give This Month and last Month or as per your reqirement) there you can see who ran the process chain with ID.
Regards,
Edited by: Subbu_Amar on Oct 13, 2010 5:01 AM

Who will be getting or upgrade to an iphone 4s?

hi, :0)
i were just wanted to see how many of you will be getting or upgrade to an iphone 4s?
-i know i will, for one. so do the sis of mine. she has been wanting it for so long. but she stucks with sprint [she is totally hate it] and cant get herself out of it [since she just got the htc evo like a few months ago]. she have gotten to wait until next year or so before she can be able to get it. She probably will get an iphone 5[which shes preferred that] instead of iphone 4 that is if they said its true that will coming out on dec. 1st.
also, which phone do you currently have?
- i am currently have an iphone 4.
thanksss<3

whoopee,
its been a long time ive been posted this...HA! but, the good news is that i have come to decided to getting an iphone 5 soon like in jan instead of 4s after my sisters got hers! shes so loving it and really enjoy it every second of it.
id just thought to let yall know whats up! =]
p.s.
hope yall enjoy your ip5 as i know i will. =o]
p.s.s
have a wonderful morning, evening, night wherever yall are. lol.
ciao.

Who will stand up to this challenge?

K, so I edited a bunch of 60 second PSA's on a single Sequence timeline. I wanted to burn each one onto a separate DVD, so I opened up a new project and copy/pasted one of the PSA's onto the sequence. It appeared in a freakishly zoomed-in manner on the second project sequence, though it was all fine in the original. I closed the second project without saving. Now, in my original project sequence, all of the audio/video files are still on the timeline, but the audio has become unrendered (red bars). I try to render them, and it tells me I don't have enough disc space, to clear up the render manager and try again. No matter how many times I clear the render manager, my audio will not render. ***?
And once I've fixed it (with your help), how do I best burn individual sections of the sequence to separate DVD's?
Who will be my savior, I ask of you?

Sounds like you have a couple of issues:
1. Where is your media stored? Sounds like it's on your system drive-- a big no-no.
2. When you created a new project, it obviously didn't match the first project. Are the spots HD, and did you create an SD project?
3. You have lots of options for burning a DVD. you could just chapter all the spots and export all from fcp and take it to compressor for the encode. Then in dvdsp make a project, import your assets and build stories. Each dvd would only play the story you tell it to. Set it up for the first one, build and format. Then do a save as, name it the second spot, set up a story for spot 2, build and format. rinse and repeat.
That's probably the simplest way to go, with the least overhead in terms of media to manage.

Who will update control file when renaming a redolog file

Hi when we rename a redolog file in mount state of database using the following command
ALTER DATABASE
RENAME FILE '/diska/logs/log1a.rdo', '/diska/logs/log2a.rdo'
TO '/diskc/logs/log1c.rdo', '/diskc/logs/log2c.rdo';
how the new location and new name of redo log files will be updated to control file and who will update that inforamtion
thanks in advance.

Where did you get this?
oracle    4774 4733 0 12:04 pts/0    00:00:00 sqlplus   as sysdba
oracle    4797     1 0 12:04 ?        00:00:00 ora_pmon_DB1
oracle    4799     1 0 12:04 ?        00:00:00 ora_vktm_DB1
oracle    4803     1 0 12:04 ?        00:00:00 ora_diag_DB1
oracle    4805     1 0 12:04 ?        00:00:00 ora_dbrm_DB1
oracle    4807     1 0 12:04 ?        00:00:00 ora_psp0_DB1
oracle    4811     1 0 12:04 ?        00:00:00 ora_dia0_DB1
oracle    4813     1 0 12:04 ?        00:00:00 ora_mman_DB1
oracle    4815     1 0 12:04 ?        00:00:00 ora_dbw0_DB1
oracle    4817     1 0 12:04 ?        00:00:00 ora_lgwr_DB1
oracle    4819     1 0 12:04 ?        00:00:00 ora_ckpt_DB1
oracle    4821     1 0 12:05 ?        00:00:00 ora_smon_DB1
oracle    4823     1 0 12:05 ?        00:00:00 ora_reco_DB1
oracle    4825     1 0 12:05 ?        00:00:00 ora_mmon_DB1
oracle    4827     1 0 12:05 ?        00:00:00 ora_mmnl_DB1
oracle    4829     1 0 12:05 ?        00:00:00 ora_d000_DB1
oracle    4831     1 0 12:05 ?        00:00:00 ora_s000_DB1
oracle    4855 4774 0 12:05 ?        00:00:00 oracleDB1 (DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
oracle    4858 4729 0 12:05 pts/1    00:00:00 bash
oracle    4875 4858 0 12:05 pts/1    00:00:00 ps -fu oracleA ps output. The db is in mounted state.
Dim

Who will give the completed information for Oracle ADF

Hi All,
Oracle ADF is a good and effective product, which simpifies the development work and reusabilties.
Lot of components are avilable in ADF.for example,Carousel component is a nice component.But I cant get the proper solution for my problem
One minute listen,Have anyone heard about OHW(Oracle Help for Web), It is a nice concept for developing the context sensitive help system.If none know how to use it means why such a nice concept developed.Who will give information for this.
There are lot of resources for other frameworks,But why not for ADF.
Hello ADF Experts, Please write all your techniques in the blog and publish your blog links in the forums atleast as new thread Oracle blogs.
Better write step by step guide lilke this links
ADF basic links
1.http://st-curriculum.oracle.com/obe/jdev/obe11jdev/ps1/ria_application/developriaapplication_long.htm
2.http://st-curriculum.oracle.com/obe/jdev/obe11jdev/ps1/boundedtaskflow/bounded_task_flow.html
3.http://st-curriculum.oracle.com/obe/jdev/obe11jdev/ps1/adf_richclient/adfrichclient.htm
Regards,
Felix

Felix - there are lots of blogs about ADF out there.
If you visit the JDeveloper page on OTN:
http://www.oracle.com/technetwork/developer-tools/jdev/overview/index.html
You'll see at the bottom an RSS feed of those blogs.
There are also a lot of how-tos, books, samples, best practices and tutorials - they are all linked from the above page.
If there is something specific you are looking for then let us know.

[ASR9K nvEdge]How to decide who will be primary DSC after cluster rebuild?

Similar Messages

Maybe you are looking for