Asrock ION330/Nvidia HDMI - No audio output
Machine was running archlinux and not been upgraded in over 6mths but HDMI audio worked fine. Decided to do a scratch build since all the changes in that time and have a nice clean system.
If it helps, this is what I install. Ssed this exact same install process for another Asrock ION330 and Acer Revo3610 (both same hardware) but neither use HDMI at all. Both VGA with either optical or analog audio. Both work with no additional config.
pacman -Sy nfs-utils screen ntp alsa-utils mlocate xorg-server xorg-xinit xorg-server-utils mesa nvidia ttf-dejavu xfce4 gamin slim mythtv unrar lirc xbmc wget
Get no sound output but also zero errors on any of the following commands. I should add that the receiver does not detect any audio coming in, ie it usually identifies how many channels of audio and type it is receiving.
aplay /usr/share/sounds/alsa/Front_Center.wav
speaker-test -Dhdmi:NVidia -c 6
aplay -D plughw:0,3 /usr/share/sounds/alsa/Front_Center.wav
Output of devices and modules:
[root@lounge ~]# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: VT1708S Analog [VT1708S Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 1: VT1708S Digital [VT1708S Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
[root@lounge ~]# aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
default:CARD=NVidia
HDA NVidia, VT1708S Analog
Default Audio Device
sysdefault:CARD=NVidia
HDA NVidia, VT1708S Analog
Default Audio Device
front:CARD=NVidia,DEV=0
HDA NVidia, VT1708S Analog
Front speakers
surround40:CARD=NVidia,DEV=0
HDA NVidia, VT1708S Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=NVidia,DEV=0
HDA NVidia, VT1708S Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=NVidia,DEV=0
HDA NVidia, VT1708S Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=NVidia,DEV=0
HDA NVidia, VT1708S Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=NVidia,DEV=0
HDA NVidia, VT1708S Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=NVidia,DEV=0
HDA NVidia, VT1708S Digital
IEC958 (S/PDIF) Digital Audio Output
hdmi:CARD=NVidia,DEV=0
HDA NVidia, HDMI 0
HDMI Audio Output
[root@lounge ~]# lsmod |grep "snd"
snd_hda_codec_hdmi 27561 1
snd_hda_codec_via 38667 1
snd_hda_intel 27668 0
snd_hda_codec 100743 3 snd_hda_codec_hdmi,snd_hda_codec_via,snd_hda_intel
snd_hwdep 6429 1 snd_hda_codec
snd_pcm 77827 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 7427 2 snd_pcm,snd_hda_intel
snd_timer 18935 1 snd_pcm
snd 60157 7 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_via,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 5443 1 snd
Tried a couple different things either from the wiki or google searching, individually with a reboot between but no change.
# Keep snd-pcsp from being loaded as first soundcard
vi /etc/modprobe.d/alsa-base.conf
options snd-pcsp index=-2
# something i used on the old working system, doesn't help but not sure why I did it
vi /etc/modprobe.d/alsa-base.conf
options snd-pcsp index=2
#no modprobe conf, try wiki
vi ~/.asoundrc
defaults.pcm.card 0
defaults.pcm.device 3
defaults.ctl.card 0
Here is the output of alsa info script (http://www.alsa-project.org/main/index. … p_To_Debug) with all defaults, ie no modprobe changes etc.
upload=true&script=true&cardinfo=
!!ALSA Information Script v 0.4.61
!!Script ran on: Fri Mar 1 02:42:57 UTC 2013
!!Linux Distribution
Arch Linux \r (\l) NAME="Arch Linux" ID=arch PRETTY_NAME="Arch Linux" HOME_URL="https://www.archlinux.org/" SUPPORT_URL="https://bbs.archlinux.org/" BUG_REPORT_URL="https://bugs.archlinux.org/"
!!DMI Information
Manufacturer: To Be Filled By O.E.M.
Product Name: To Be Filled By O.E.M.
Product Version: To Be Filled By O.E.M.
Firmware Version: P1.60
!!Kernel Information
Kernel release: 3.7.9-2-ARCH
Operating System: GNU/Linux
Architecture: x86_64
Processor: unknown
SMP Enabled: Yes
!!ALSA Version
Driver version: k3.7.9-2-ARCH
Library version: 1.0.26
Utilities version: 1.0.26
!!Loaded ALSA modules
snd_hda_intel
!!Sound Servers on this system
No sound servers found.
!!Soundcards recognised by ALSA
0 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xfae78000 irq 21
!!PCI Soundcards installed in the system
00:08.0 Audio device: NVIDIA Corporation MCP79 High Definition Audio (rev b1)
!!Advanced information - PCI Vendor/Device/Subsystem ID's
00:08.0 0403: 10de:0ac0 (rev b1)
Subsystem: 1849:0397
!!Loaded sound module options
!!Module: snd_hda_intel
align_buffer_size : -1
bdl_pos_adj : 32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
beep_mode : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable_msi : -1
id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
position_fix : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
power_save : 0
power_save_controller : Y
probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
single_cmd : N
snoop : Y
!!HDA-Intel Codec information
--startcollapse--
Codec: VIA VT1708S
Address: 0
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x11060397
Subsystem Id: 0x18490397
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:
formats [0x0]:
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=1, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x10 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Control: name="Front Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name="VT1708S Analog", type="Audio", device=0
Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0
Amp-Out vals: [0x2a 0x2a]
Converter: stream=0, channel=0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Node 0x11 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Control: name="Surround Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0
Amp-Out vals: [0x2a 0x2a]
Converter: stream=0, channel=0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3
Power: setting=D3, actual=D3
Node 0x12 [Audio Output] wcaps 0x611: Stereo Digital
Control: name="IEC958 Playback Con Mask", index=0, device=0
Control: name="IEC958 Playback Pro Mask", index=0, device=0
Control: name="IEC958 Playback Default", index=0, device=0
Control: name="IEC958 Playback Switch", index=0, device=0
Control: name="IEC958 Default PCM Playback Switch", index=0, device=0
Device: name="VT1708S Digital", type="SPDIF", device=1
Converter: stream=0, channel=0
Digital: Enabled GenLevel
Digital category: 0x2
IEC Coding Type: 0x0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Node 0x13 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Control: name="Capture Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Capture Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Device: name="VT1708S Analog", type="Audio", device=0
Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x00 0x00]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 1
0x17
Node 0x14 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Control: name="Capture Volume", index=1, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Capture Switch", index=1, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x00 0x00]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 1
0x1e
Node 0x15 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Node 0x16 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
Control: name="PCM Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="PCM Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Mic Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=2, ofs=0
Control: name="Mic Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=2, ofs=0
Control: name="Line Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=3, ofs=0
Control: name="Line Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=3, ofs=0
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x19 0x19] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 7
0x10 0x1f 0x1a 0x1b 0x1e 0x1d 0x25
Node 0x17 [Audio Selector] wcaps 0x300501: Stereo
Control: name="Input Source", index=0, device=0
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 6
0x1f 0x1a* 0x1b 0x1e 0x1d 0x16
Node 0x18 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Control: name="Surround Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Power states: D0 D1 D2 D3
Power: setting=D3, actual=D3
Connection: 1
0x11
Node 0x19 [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00000014: OUT Detect
Pin Default 0x410110f2: [N/A] Line Out at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x2
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3
Power: setting=D3, actual=D3
Connection: 1
0x18
Node 0x1a [Pin Complex] wcaps 0x400581: Stereo
Control: name="Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Mic Jack", index=0, device=0
Pincap 0x00002334: IN OUT Detect
Vref caps: HIZ 50 100
Pin Default 0x01a19036: [Jack] Mic at Ext Rear
Conn = 1/8, Color = Pink
DefAssociation = 0x3, Sequence = 0x6
Pin-ctls: 0x21: IN VREF_50
Unsolicited: tag=02, enabled=1
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 1
0x26
Node 0x1b [Pin Complex] wcaps 0x400581: Stereo
Control: name="Line Jack", index=0, device=0
Pincap 0x00002334: IN OUT Detect
Vref caps: HIZ 50 100
Pin Default 0x0181303e: [Jack] Line In at Ext Rear
Conn = 1/8, Color = Blue
DefAssociation = 0x3, Sequence = 0xe
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=03, enabled=1
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 1
0x18
Node 0x1c [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Control: name="Front Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Line Out Jack", index=0, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0001001c: OUT HP EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x01014010: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Green
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=01, enabled=1
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 1
0x16
Node 0x1d [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000233c: IN OUT HP Detect
Vref caps: HIZ 50 100
Pin Default 0x422140f0: [N/A] HP Out at Ext Front
Conn = 1/8, Color = Green
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3
Power: setting=D3, actual=D3
Connection: 2
0x16* 0x25
Node 0x1e [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000233c: IN OUT HP Detect
Vref caps: HIZ 50 100
Pin Default 0x42a190f8: [N/A] Mic at Ext Front
Conn = 1/8, Color = Pink
DefAssociation = 0xf, Sequence = 0x8
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3
Power: setting=D3, actual=D3
Connection: 2
0x16* 0x25
Node 0x1f [Pin Complex] wcaps 0x400401: Stereo
Pincap 0x00000020: IN
Pin Default 0x503701f7: [N/A] CD at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0xf, Sequence = 0x7
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Node 0x20 [Pin Complex] wcaps 0x400701: Stereo Digital
Control: name="SPDIF Phantom Jack", index=0, device=0
Pincap 0x00000010: OUT
Pin Default 0x074511f0: [Jack] SPDIF Out at Ext Rear Panel
Conn = Optical, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 1
0x12
Node 0x21 [Pin Complex] wcaps 0x400701: Stereo Digital
Pincap 0x00000010: OUT
Pin Default 0x474411f0: [N/A] SPDIF Out at Ext Rear Panel
Conn = RCA, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 1
0x15
Node 0x22 [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00000014: OUT Detect
Pin Default 0x410160f1: [N/A] Line Out at Ext Rear
Conn = 1/8, Color = Orange
DefAssociation = 0xf, Sequence = 0x1
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3
Power: setting=D3, actual=D3
Connection: 1
0x26
Node 0x23 [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00000014: OUT Detect
Pin Default 0x410120f4: [N/A] Line Out at Ext Rear
Conn = 1/8, Color = Grey
DefAssociation = 0xf, Sequence = 0x4
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3
Power: setting=D3, actual=D3
Connection: 1
0x27
Node 0x24 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Control: name="Center Playback Volume", index=0, device=0
ControlAmp: chs=1, dir=Out, idx=0, ofs=0
Control: name="LFE Playback Volume", index=0, device=0
ControlAmp: chs=2, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0
Amp-Out vals: [0x2a 0x2a]
Converter: stream=0, channel=0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3
Power: setting=D3, actual=D3
Node 0x25 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0
Amp-Out vals: [0x2a 0x2a]
Converter: stream=0, channel=0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Node 0x26 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Control: name="Center Playback Switch", index=0, device=0
ControlAmp: chs=1, dir=Out, idx=0, ofs=0
Control: name="LFE Playback Switch", index=0, device=0
ControlAmp: chs=2, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Power states: D0 D1 D2 D3
Power: setting=D3, actual=D3
Connection: 1
0x24
Node 0x27 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 1
0x25
Codec: Nvidia MCP79/7A HDMI
Address: 3
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x10de0007
Subsystem Id: 0x10de0101
Revision Id: 0x100100
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:
formats [0x0]:
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x04 [Audio Output] wcaps 0x211: Stereo Digital
Control: name="IEC958 Playback Con Mask", index=1, device=0
Control: name="IEC958 Playback Pro Mask", index=1, device=0
Control: name="IEC958 Playback Default", index=1, device=0
Control: name="IEC958 Playback Switch", index=1, device=0
Device: name="HDMI 0", type="HDMI", device=3
Converter: stream=0, channel=0
Digital: Enabled
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0xc0]: 48000 88200
bits [0xf]: 8 16 20 24
formats [0x1]: PCM
Node 0x05 [Pin Complex] wcaps 0x400381: Stereo Digital
Control: name="HDMI/DP,pcm=3 Jack", index=0, device=0
Pincap 0x00000014: OUT Detect
Pin Default 0x18560110: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x04
Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0xc0]: 48000 88200
bits [0xf]: 8 16 20 24
formats [0x1]: PCM
Node 0x07 [Pin Complex] wcaps 0x400381: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x58560121: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x2, Sequence = 0x1
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x06
Node 0x08 [Audio Output] wcaps 0x211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0xc0]: 48000 88200
bits [0xf]: 8 16 20 24
formats [0x1]: PCM
Node 0x09 [Pin Complex] wcaps 0x400381: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x58560122: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x2, Sequence = 0x2
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x08
Node 0x0a [Audio Output] wcaps 0x211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0xc0]: 48000 88200
bits [0xf]: 8 16 20 24
formats [0x1]: PCM
Node 0x0b [Pin Complex] wcaps 0x400381: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x58560123: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x2, Sequence = 0x3
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x0a
Node 0x0c [Audio Output] wcaps 0x211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0xc0]: 48000 88200
bits [0xf]: 8 16 20 24
formats [0x1]: PCM
Node 0x0d [Pin Complex] wcaps 0x400381: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x58560124: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x2, Sequence = 0x4
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x0c
--endcollapse--
!!ALSA Device nodes
crw-rw----+ 1 root audio 116, 8 Mar 1 13:41 /dev/snd/controlC0
crw-rw----+ 1 root audio 116, 7 Mar 1 13:41 /dev/snd/hwC0D0
crw-rw----+ 1 root audio 116, 6 Mar 1 13:41 /dev/snd/hwC0D3
crw-rw----+ 1 root audio 116, 5 Mar 1 13:41 /dev/snd/pcmC0D0c
crw-rw----+ 1 root audio 116, 4 Mar 1 13:41 /dev/snd/pcmC0D0p
crw-rw----+ 1 root audio 116, 3 Mar 1 13:41 /dev/snd/pcmC0D1p
crw-rw----+ 1 root audio 116, 2 Mar 1 13:41 /dev/snd/pcmC0D3p
crw-rw---- 1 root audio 116, 1 Mar 1 13:41 /dev/snd/seq
crw-rw----+ 1 root audio 116, 33 Mar 1 13:41 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 60 Mar 1 13:41 .
drwxr-xr-x 3 root root 240 Mar 1 13:41 ..
lrwxrwxrwx 1 root root 12 Mar 1 13:41 pci-0000:00:08.0 -> ../controlC0
!!Aplay/Arecord output
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: VT1708S Analog [VT1708S Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 1: VT1708S Digital [VT1708S Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: VT1708S Analog [VT1708S Analog]
Subdevices: 2/2
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
!!Amixer output
!!-------Mixer controls for card 0 [NVidia]
Card hw:0 'NVidia'/'HDA NVidia at 0xfae78000 irq 21'
Mixer name : 'Nvidia MCP79/7A HDMI'
Components : 'HDA:11060397,18490397,00100000 HDA:10de0007,10de0101,00100100'
Controls : 43
Simple ctrls : 17
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 42
Mono: Playback 42 [100%] [0.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 25 [81%] [3.00dB] [on]
Front Right: Playback 25 [81%] [3.00dB] [on]
Simple mixer control 'Front',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 42
Mono:
Front Left: Playback 42 [100%] [0.00dB] [on]
Front Right: Playback 42 [100%] [0.00dB] [on]
Simple mixer control 'Surround',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 42
Mono:
Front Left: Playback 42 [100%] [0.00dB] [on]
Front Right: Playback 42 [100%] [0.00dB] [on]
Simple mixer control 'Center',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 42
Mono: Playback 42 [100%] [0.00dB] [on]
Simple mixer control 'LFE',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 42
Mono: Playback 42 [100%] [0.00dB] [on]
Simple mixer control 'Line',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [off]
Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Mic',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [off]
Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958 Default PCM',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958',1
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 31
Front Left: Capture 0 [0%] [-16.50dB] [on]
Front Right: Capture 0 [0%] [-16.50dB] [on]
Simple mixer control 'Capture',1
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 31
Front Left: Capture 0 [0%] [-16.50dB] [on]
Front Right: Capture 0 [0%] [-16.50dB] [on]
Simple mixer control 'Dynamic Power-Control',0
Capabilities: enum
Items: 'Disabled' 'Enabled'
Item0: 'Disabled'
Simple mixer control 'Input Source',0
Capabilities: cenum
Items: 'Mic' 'Line' 'Stereo Mixer'
Item0: 'Mic'
Simple mixer control 'Smart 5.1',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
!!Alsactl output
--startcollapse--
state.NVidia {
control.1 {
iface MIXER
name 'Front Playback Volume'
value.0 42
value.1 42
comment {
access 'read write'
type INTEGER
count 2
range '0 - 42'
dbmin -6300
dbmax 0
dbvalue.0 0
dbvalue.1 0
control.2 {
iface MIXER
name 'Front Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.3 {
iface MIXER
name 'Surround Playback Volume'
value.0 42
value.1 42
comment {
access 'read write'
type INTEGER
count 2
range '0 - 42'
dbmin -6300
dbmax 0
dbvalue.0 0
dbvalue.1 0
control.4 {
iface MIXER
name 'Surround Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.5 {
iface MIXER
name 'Center Playback Volume'
value 42
comment {
access 'read write'
type INTEGER
count 1
range '0 - 42'
dbmin -6300
dbmax 0
dbvalue.0 0
control.6 {
iface MIXER
name 'Center Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.7 {
iface MIXER
name 'LFE Playback Volume'
value 42
comment {
access 'read write'
type INTEGER
count 1
range '0 - 42'
dbmin -6300
dbmax 0
dbvalue.0 0
control.8 {
iface MIXER
name 'LFE Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.9 {
iface MIXER
name 'PCM Playback Volume'
value.0 25
value.1 25
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 300
dbvalue.1 300
control.10 {
iface MIXER
name 'PCM Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.11 {
iface MIXER
name 'Capture Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -1650
dbmax 3000
dbvalue.0 -1650
dbvalue.1 -1650
control.12 {
iface MIXER
name 'Capture Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.13 {
iface MIXER
name 'Capture Volume'
index 1
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -1650
dbmax 3000
dbvalue.0 -1650
dbvalue.1 -1650
control.14 {
iface MIXER
name 'Capture Switch'
index 1
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.15 {
iface MIXER
name 'Input Source'
value Mic
comment {
access 'read write'
type ENUMERATED
count 1
item.0 Mic
item.1 Line
item.2 'Stereo Mixer'
control.16 {
iface MIXER
name 'Mic Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 -3450
dbvalue.1 -3450
control.17 {
iface MIXER
name 'Mic Playback Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
control.18 {
iface MIXER
name 'Line Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 -3450
dbvalue.1 -3450
control.19 {
iface MIXER
name 'Line Playback Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
control.20 {
iface MIXER
name 'Mic Boost Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3075
dbvalue.0 0
dbvalue.1 0
control.21 {
iface MIXER
name 'Smart 5.1'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.22 {
iface MIXER
name 'Dynamic Power-Control'
value Disabled
comment {
access 'read write'
type ENUMERATED
count 1
item.0 Disabled
item.1 Enabled
control.23 {
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.24 {
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.25 {
iface MIXER
name 'IEC958 Playback Default'
value '0482000200000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
control.26 {
iface MIXER
name 'IEC958 Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.27 {
iface MIXER
name 'IEC958 Default PCM Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.28 {
iface MIXER
name 'Master Playback Volume'
value 42
comment {
access 'read write'
type INTEGER
count 1
range '0 - 42'
dbmin -6300
dbmax 0
dbvalue.0 0
control.29 {
iface MIXER
name 'Master Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.30 {
iface CARD
name 'Line Out Jack'
value false
comment {
access read
type BOOLEAN
count 1
control.31 {
iface CARD
name 'Mic Jack'
value false
comment {
access read
type BOOLEAN
count 1
control.32 {
iface CARD
name 'Line Jack'
value false
comment {
access read
type BOOLEAN
count 1
control.33 {
iface CARD
name 'SPDIF Phantom Jack'
value true
comment {
access read
type BOOLEAN
count 1
control.34 {
iface PCM
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
comment {
access read
type INTEGER
count 6
range '0 - 27'
control.35 {
iface PCM
name 'Capture Channel Map'
value.0 0
value.1 0
comment {
access read
type INTEGER
count 2
range '0 - 27'
control.36 {
iface PCM
name 'Capture Channel Map'
index 1
value.0 0
value.1 0
comment {
access read
type INTEGER
count 2
range '0 - 27'
control.37 {
iface PCM
device 1
name 'Playback Channel Map'
value.0 0
value.1 0
comment {
access read
type INTEGER
count 2
range '0 - 27'
control.38 {
iface MIXER
name 'IEC958 Playback Con Mask'
index 1
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.39 {
iface MIXER
name 'IEC958 Playback Pro Mask'
index 1
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.40 {
iface MIXER
name 'IEC958 Playback Default'
index 1
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
control.41 {
iface MIXER
name 'IEC958 Playback Switch'
index 1
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.42 {
iface CARD
name 'HDMI/DP,pcm=3 Jack'
value false
comment {
access read
type BOOLEAN
count 1
control.43 {
iface PCM
device 3
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
value.6 0
value.7 0
comment {
access read
type INTEGER
count 8
range '0 - 27'
--endcollapse--
!!All Loaded Modules
Module
nfsv4
auth_rpcgss
nvidia
snd_hda_codec_hdmi
ir_lirc_codec
lirc_dev
joydev
ir_mce_kbd_decoder
ir_sanyo_decoder
ir_sony_decoder
hid_generic
ir_jvc_decoder
usbhid
ir_nec_decoder
snd_hda_codec_via
hid
mceusb
rc_core
snd_hda_intel
i2c_nforce2
i2c_core
snd_hda_codec
snd_hwdep
snd_pcm
snd_page_alloc
snd_timer
forcedeth
snd
soundcore
shpchp
pci_hotplug
evdev
psmouse
mperf
serio_raw
pcspkr
button
processor
wmi
coretemp
microcode
nfs
lockd
sunrpc
fscache
ext4
crc16
jbd2
mbcache
usb_storage
sr_mod
cdrom
sd_mod
ohci_hcd
ahci
libahci
ehci_hcd
libata
scsi_mod
usbcore
usb_common
!!Sysfs Files
/sys/class/sound/hwC0D0/init_pin_configs:
0x19 0x410110f2
0x1a 0x01a19036
0x1b 0x0181303e
0x1c 0x01014010
0x1d 0x422140f0
0x1e 0x42a190f8
0x1f 0x503701f7
0x20 0x074511f0
0x21 0x474411f0
0x22 0x410160f1
0x23 0x410120f4
/sys/class/sound/hwC0D0/driver_pin_configs:
/sys/class/sound/hwC0D0/user_pin_configs:
/sys/class/sound/hwC0D0/init_verbs:
/sys/class/sound/hwC0D3/init_pin_configs:
0x05 0x18560110
0x07 0x58560121
0x09 0x58560122
0x0b 0x58560123
0x0d 0x58560124
/sys/class/sound/hwC0D3/driver_pin_configs:
/sys/class/sound/hwC0D3/user_pin_configs:
/sys/class/sound/hwC0D3/init_verbs:
!!ALSA/HDA dmesg
[ 6.093571] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 6.093614] hda_intel: Disabling MSI
[ 6.093710] snd_hda_intel 0000:00:08.0: setting latency timer to 64
[ 6.743392] IR keymap rc-rc6-mce not found
[ 7.150166] Disabling lock debugging due to kernel taint
[ 7.450271] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.0/sound/card0/input7
[ 7.450581] input: HDA NVidia Line as /devices/pci0000:00/0000:00:08.0/sound/card0/input8
[ 7.450836] input: HDA NVidia Mic as /devices/pci0000:00/0000:00:08.0/sound/card0/input9
[ 7.451099] input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:08.0/sound/card0/input10
[ 7.453217] ACPI: PCI Interrupt Link [LPMU] enabled at IRQ 20
FWIW, I even tried changing the HDMI cable, turning the amp on before or after the PC etc. No change.
Last edited by dave00 (2013-03-01 03:03:42)
Default install, clean boot and I get this error but the info above indicates there is a sound device. Confused!
[root@lounge ~]# systemctl status alsa-restore.service
alsa-restore.service - Restore Sound Card State
Loaded: loaded (/usr/lib/systemd/system/alsa-restore.service; static)
Active: inactive (dead) since Fri 2013-03-01 18:01:19 EST; 1min 2s ago
Process: 241 ExecStart=/usr/sbin/alsactl restore (code=exited, status=19)
Mar 01 18:01:18 lounge systemd[1]: Starting Restore Sound Card State...
Mar 01 18:01:19 lounge alsactl[241]: /usr/sbin/alsactl: load_state:1696: No soundcards found...
Mar 01 18:01:19 lounge systemd[1]: Started Restore Sound Card State.
[root@lounge ~]# systemctl status alsa-store.service
alsa-store.service - Store Sound Card State
Loaded: loaded (/usr/lib/systemd/system/alsa-store.service; static)
Active: inactive (dead)
Mar 01 13:41:03 lounge systemd[1]: Started Store Sound Card State.
Mar 01 13:45:54 lounge systemd[1]: Starting Store Sound Card State...
Mar 01 13:45:55 lounge systemd[1]: Started Store Sound Card State.
Mar 01 14:04:19 lounge systemd[1]: Started Store Sound Card State.
Mar 01 17:25:11 lounge systemd[1]: Starting Store Sound Card State...
Mar 01 17:25:11 lounge systemd[1]: Started Store Sound Card State.
Mar 01 17:39:05 lounge systemd[1]: Starting Store Sound Card State...
Mar 01 17:39:05 lounge systemd[1]: Started Store Sound Card State.
Mar 01 18:00:51 lounge systemd[1]: Starting Store Sound Card State...
Mar 01 18:00:51 lounge systemd[1]: Started Store Sound Card State.
Journal
Mar 01 18:01:19 lounge kernel: hda_intel: Disabling MSI
Mar 01 18:01:19 lounge kernel: snd_hda_intel 0000:00:08.0: setting latency timer to 64
Mar 01 18:01:19 lounge alsactl[241]: /usr/sbin/alsactl: load_state:1696: No soundcards found...
Mar 01 18:01:19 lounge systemd[1]: Started Restore Sound Card State.
Mar 01 18:01:20 lounge systemd[1]: Started Linux Infrared Remote Control.
Mar 01 18:01:22 lounge kernel: input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.0/sound/card0/input7
Mar 01 18:01:22 lounge kernel: input: HDA NVidia Line as /devices/pci0000:00/0000:00:08.0/sound/card0/input8
Mar 01 18:01:22 lounge kernel: input: HDA NVidia Mic as /devices/pci0000:00/0000:00:08.0/sound/card0/input9
Mar 01 18:01:22 lounge kernel: input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:08.0/sound/card0/input10
Mar 01 18:01:22 lounge systemd[1]: Starting Sound Card.
Mar 01 18:01:22 lounge systemd[1]: Reached target Sound Card.
Edit: Am I correct in saying that the issue is because alsactl restore is running before the sound card?
Last edited by dave00 (2013-03-01 07:30:12)
Similar Messages
-
[SOLVED] Only HDMI/Displayport audio outputs; no sound from speakers
I have a Dell XPS14 running Arch, which has worked fine for a while, but now has suddenly stopped detecting the internal speakers and headphones, so it will not play sound. I have tried a few things to narrow down the problem, but I've had no luck so far. In GNOME shell, when I press the physical volume up/down buttons on my laptop, it displays a sound icon with "HDMI / DisplayPort" underneath . When I go into the gnome shell audio settings menu, everything is greyed out, and no output devices are listed.
If anyone has any suggestions as to what the problem might be or how I might go about troubleshooting it from here, I would appreciate it.
One thing that struck me was that I had installed a music player, Clementine, recently, and I'm not sure if I did or did not ever have sound after that. I installed Clementine and two optional gstreamer0.10 plugins (bad and ugly). Since this seemed like it would be possibly related, I've since removed Clementine, the new gstreamer plugins, and all of their dependencies not needed by any other package. So I now don't think that is likely to be the problem. Just to be thorough, though, here are the packages which were installed:
[2014-06-03 15:22] [PACMAN] Running 'pacman --color auto -S community/clementine'
[2014-06-03 15:22] [PACMAN] installed mutagen (1.23-1)
[2014-06-03 15:22] [PACMAN] installed sg3_utils (1.38-1)
[2014-06-03 15:22] [PACMAN] installed libgpod (0.8.3-2)
[2014-06-03 15:22] [PACMAN] installed liblastfm (1.0.8-1)
[2014-06-03 15:22] [PACMAN] installed libmtp (1.1.6-6)
[2014-06-03 15:22] [PACMAN] installed qjson (0.8.1-2)
[2014-06-03 15:22] [PACMAN] installed libmygpo-qt (1.0.7-1)
[2014-06-03 15:22] [PACMAN] installed protobuf (2.5.0-3)
[2014-06-03 15:22] [PACMAN] installed qca-ossl (2.0.0-7)
[2014-06-03 15:22] [PACMAN] installed clementine (1.2.3-1)
[2014-06-03 15:23] [PACMAN] Running 'pacman -S gstreamer0.10-bad-plugins gstreamer0.10-ugly-plugins'
[2014-06-03 15:23] [PACMAN] installed libdc1394 (2.2.1-2)
[2014-06-03 15:23] [PACMAN] installed musicbrainz (2.1.5-6)
[2014-06-03 15:23] [PACMAN] installed libcdaudio (0.99.12-7)
[2014-06-03 15:23] [PACMAN] installed ladspa (1.13-4)
[2014-06-03 15:23] [PACMAN] installed liblrdf (0.5.0-2)
[2014-06-03 15:23] [PACMAN] installed gstreamer0.10-bad-plugins (0.10.23-8)
[2014-06-03 15:23] [PACMAN] installed gstreamer0.10-ugly-plugins (0.10.19-11)
Anyway, on to the diagnostics that I have done:
Running
aplay -l
returns:
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
running
#lspci -vvv | grep -A 40 -i audio
returns:
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
Subsystem: Dell Device 054c
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at c0610000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee003f8 Data: 0000
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=22
Status: NegoPending- InProgress-
Capabilities: [130 v1] Root Complex Link
Desc: PortNumber=0f ComponentID=00 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_inte
and running
dmesg | grep snd_hda_intel
returns
[ 3.405522] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
Any ideas?
Last edited by bond0087 (2014-06-09 02:06:08)Thanks again for the info and suggestions. I thought the same thing regarding the sparse output of alsamixer, but since I never had trouble with the sound before, I don't know how much would have shown up when everything was working well.
I still haven't really found a smoking gun here, unfortunately. As far as I can tell, the power saving settings look about right, because the power saving settings for the HDMI audio (which works) looks to be the same as the others.
Thanks for the link with more information regarding the module options for the intel sound driver. I'm going to dig into those when I have time next week. The thing that makes me less optimistic that I'm going to fix it with module options is that I can't figure out how those module options would suddenly change.
I'm also going to try out the linux-lts kernel to see if it behaves any differently, and then maybe boot another distro with a usb key to see if it works, and if so, what looks different.
Here's what I get from the suggested tests. Let me know if anyone sees something strange that I missed.
$ lsmod | grep ^snd
snd_hda_codec_hdmi 36716 1
snd_hda_intel 38728 2
snd_hda_codec 101816 2 snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep 6396 1 snd_hda_codec
snd_pcm 81607 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_timer 19038 1 snd_pcm
snd 60086 10 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
$ cat /proc/asound/card*/codec*
Codec: Intel PantherPoint HDMI
Address: 3
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x80862806
Subsystem Id: 0x1028054c
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:
formats [0x0]:
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
Power states: D0 D3 CLKSTOP EPSS
Power: setting=D0, actual=D0, Clock-stop-OK
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x02 [Audio Output] wcaps 0x6611: 8-Channels Digital
Device: name="HDMI 0", type="HDMI", device=3
Converter: stream=8, channel=0
Digital: Enabled GenLevel
Digital category: 0x2
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x04 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x05 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Control: name="HDMI/DP,pcm=3 Jack", index=0, device=0
Control: name="IEC958 Playback Con Mask", index=0, device=0
Control: name="IEC958 Playback Pro Mask", index=0, device=0
Control: name="IEC958 Playback Default", index=0, device=0
Control: name="IEC958 Playback Switch", index=0, device=0
Control: name="ELD", index=0, device=3
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=01, enabled=1
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x02
Node 0x06 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Control: name="HDMI/DP,pcm=7 Jack", index=0, device=0
Control: name="IEC958 Playback Con Mask", index=1, device=0
Control: name="IEC958 Playback Pro Mask", index=1, device=0
Control: name="IEC958 Playback Default", index=1, device=0
Control: name="IEC958 Playback Switch", index=1, device=0
Control: name="ELD", index=0, device=7
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x18560020: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=02, enabled=1
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x03
Node 0x07 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x80]
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x58560030: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x3, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x04
Node 0x08 [Vendor Defined Widget] wcaps 0xf00000: Mono
$ pacman -Qi linux
Name : linux
Version : 3.14.5-1
Description : The Linux kernel and modules
Architecture : x86_64
URL : http://www.kernel.org/
Licenses : GPL2
Groups : base
Provides : kernel26=3.14.5
Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
Optional Deps : crda: to set the correct wireless channels of your country
Required By : virtualbox-host-modules
Optional For : None
Conflicts With : kernel26
Replaces : kernel26
Installed Size : 71950.00 KiB
Packager : Tobias Powalowski <[email protected]>
Build Date : Sun 01 Jun 2014 01:40:01 AM EDT
Install Date : Thu 05 Jun 2014 12:30:36 AM EDT
Install Reason : Explicitly installed
Install Script : Yes
Validated By : Signature
$ uname -a
Linux CaliforniaChrome 3.14.5-1-ARCH #1 SMP PREEMPT Sun Jun 1 07:36:23 CEST 2014 x86_64 GNU/Linux -
Macbook pro to hdmi video/audio output TV
I Bought a mini display port to hdmi cable, to play dispaly my desktop on my LCD TV. the display works just fine, but there's no sound. I try to follow the steps in youtube, but the problem is, there's no sound output detected. Any ideas on how to solve this? Because, what i know is that hdmi can both deliver hdmi video and audio.
Model Name: MacBook Pro
Model Identifier: MacBookPro8,2
Processor Name: Intel Core i7
Processor Speed: 2.2 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 6 MB
Memory: 4 GB
Boot ROM Version: MBP81.0047.B04
SMC Version (system): 1.69f1
Serial Number (system): < Edited by Host >
Hardware UUID: 471C7865-ED80-5DDB-9047-1B7C731CA1B9
Sudden Motion Sensor:
State: Enabled
See i AM getting the hang of using my Mac LOL. i probably couldnt have done that wiv windose.
< Edited by Host > -
Plug in Mini Diplayport to HDMI, Lose Audio Output
For the first time today, I plugged in my mid 2009 MBP5,3 into my TV using an HDMI to mini displayport cable. I got video, but no sound.
Ever since then, I have had no sound of any kind come out of the computer's speakers. When I look in System Preferences/Sound/Ouput, the only option I see is optical digital-out port. No internal speakers. I have rebooted and stuck toothpicks into both the mini displayport and audio ports. No go.
Any suggestions on how to get my sound back?
Thanks much!Optical digital-out port problem
I have been dealing with the following problem with my macbook speakers: I can't get the Speakers to work. It doesn't show up on System Preferences as an option for Sound Output.
I am confident that it is not a hardware issue. I have windows running in the mac and the speakers are working just fine. Unfortunately on the mac OS the Sound Output is shown as Optical digital-out port. When headphones are plugged in, it works just fine.
I have installed a new version of the OS and I have reset the PRAM and SMC without any luck.
Any help will be appreciated. -
HT204388 HDMI for audio output only
Hi,
I want to the use the HDMI purely for sending audio to a surround sound system, keeping the video output to my existing monitor connected on mini displayport. Can this be configured in OSX?
Thanks in advanceHi, I don't really know, but...
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there. -
What EXACTLY are the 4 NVIDIA High Definition Audio devices on N570GTX - Win 8.1
Hi guys,
one of my rigs runs an N570GTX on Win 8.1 64bit.
In Device Manager > Sound, Video and Game Controllers, there are 4 "NVIDIA High Definition Audio" listed.
I use 337.88 drivers (NVIDIA Control Panel version 7.7.760.0).
What is the purpose of EACH of these 4 devices:
As a side note, my other rig running an N660GTX on Win 7 64bit only shows 1 "NVIDIA High Definition Audio" in Device Manager > Sound, Video and Game Controllers.Okay, by examining the devices (enabling, disabling, reading driver data), I can conclusively state that one of the drivers (in my case residing in Location 1) is exclusively tied to the HDMI port on my GPU – when I disable it, my HDMI device (I have only one; shame, because I can't isolate the devices better) stops being listed in Windows Sound Control Panel; when I disable all other devices except that one, my audio over HDMI works fine – this leads me to believe that the other ones are not really essential codecs required for HDMI audio, but are instead related to the individual audio outputs.
In summary, assuming the other two devices (residing, for example, in Location 0 and Location 2) are for audio output on DVI ports (usable via DVI->HDMI adapter/cable), there's still one NVIDIA High Definition Audio device (residing in, say, Location 3), which doesn't seem to be in use in relation to some sort of global codec mechanism (since I can disable it without affecting my HDMI port audio output), that is unaccounted for!
Any idea what other output can the remaining device be linked to, since GTX570 has no S/PDIF pass-through connector on the board itself (to connect it to the motherboard's S/PDIF output)?
Could the remaining device be there only as a legacy stub for S/PDIF connector which was present on the pre GeForce 400 Series cards, since they share the same NVIDIA drivers with the post-Tesla series?
But in that case, why does my GTX660 list only one NVIDIA High Definition Audio device in Win 7 64bit?
Quote from: Nichrome on 02-July-14, 19:33:05
Apart from the sound you can get through HDMI (which would be 1 or 2 of these in management), it provides your board with some "HD Sound Drivers" which takes another 1 or 2 of these.
I have quite few of these too even on my old laptop (with Nvidia card): x4 Nvidia High Definition Audio, x1 Cyberlink WebCam, x1 Realtek HD and x1 Bluetooth sound.
Your specs read that you have a GTX770 running on Win 7 64bit; do you also have four of the Nvidia High Definition Audio devices? Or just one? Thanks! -
HOW TO: HDMI Audio Output for Zotac Media Box with nVidia ION :)
I've been fighting with my recently purchased Zotac mini-PC for about 2 months now trying to get the HDMI audio output to work. I tried extensive modifications of /etc/asound.conf, different versions of ALSA, and even OSS without success. I've finally succeeded using ALSA and GNOME.
First I installed ALSA according to the Arch wiki.
Next I verified that ALSA detected my sound card(s):
cat /proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xfe9fc000 irq 28
1 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xfcf7c000 irq 18
Next I checked which sound card had the HDMI jack:
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC888 Analog [ALC888 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC888 Digital [ALC888 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: NVIDIA HDMI [NVIDIA HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: NVIDIA HDMI [NVIDIA HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: NVIDIA HDMI [NVIDIA HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 9: NVIDIA HDMI [NVIDIA HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
From these two commands, I concluded that I have 2 sound cards (important later on) and that my HDMI sound card was card 1 (NVidia) and that it had 4 possible devices (3,7,8, and 9). To determine which device must be used, I ran the following command for each device (for example, to test card X and device Y, use' plughw:X,Y'):
aplay /usr/share/sounds/alsa/Front_Center.wav -D plughw:1,7
Playing WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
I tried each device and got the best sound from device 7 (8 and 9 also worked, device 3 gave static...).
Now, since I had 2 sound cards, I needed to change the default ALSA device. My default ALSA device was card 0 (the Intel card), which wasn't plugged in, so I needed to change the default card to be card 1 (the HDMI card). After reading the ALSA FAQ, I found that modifying /usr/share/alsa.conf should work, though modifying /etc/asound.conf should have also worked. For whatever reason, I couldn't get my modifications to /etc/asound.conf to work, so I edited /usr/share/alsa/alsa.conf. In the "# defaults" section I replaced the following:
defaults.ctl.card NVidia
defaults.pcm.card NVidia
defaults.pcm.device 7
I opted to use the key NVidia rather than the card number (1) since I've read in numerous places that the card index can change unexpectedly after a reboot/update. The key can be checked with cat /proc/asound/cards as shown above.
After this, I reloaded ALSA (/etc/rc.d/alsa restart) and verified that the sound worked through the default channel:
aplay /usr/share/sounds/alsa/Front_Center.wav -D default
Playing WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
Finally, I rebooted, chose the HDA NVidia (ALSA Mixer) option from gnome-volume-control, and loaded a movie in gnome-mplayer. I was pleased to hear crystal clear sound with functioning volume control
I Hope this helps someone else, I found it very hard to piece together how to diagnose and resolve this problem. Here are some of the resources I found useful:
Arch Wiki ALSA Page
ALSA FAQ for how to change default sound card
ALSA FAQ
XBMC Troubleshooting for ION HDMI@sprince09 Can you hear sound through HDMI when you run aplay /usr/share/sounds/alsa/Front_Center.wav -D plughw:1,7 ?
(8 and 9 also worked, device 3 gave static...)
- what does it mean? How do you know that they are working?
What options do you have for snd_hda_intel in /etc/modprobe.d/ ? Can you play the following:
mplayer -ao alsa:device=hw=1,7 file.wav
BTW, can you hear sound form video files in xine? If yes, can you post your ~/.xine/config ?
Last edited by knedlyk (2012-01-21 23:41:57) -
Hello everyone,
this is my first post in Arch Linux forum. I am a Newbie but have always managed to work things around with ArchWiki documentation, but I am having an issue I could not solve for some time now.
My HDMI audio output was working fine, but stoped working about a month ago, maybe due to some update. I use the open source ATI driver (xf86-video-ati package), and enabled the kernel parameter radeon.audio=1, like it is documented.
My graphics card is a Radeon HD 3650. I checked for the compatibility of the driver (http://www.x.org/wiki/RadeonFeature/#De … ting_names) and it seems to be ok.
Do you have any suggestion to help me?
Thank you in advanceAndreaskem wrote:
Output of "aplay -l"?
Do you use pulseaudio? If so, what is the output of "pactl list"?
Thank you for your reply
Here is the output of aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC268 Analog [ALC268 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC268 Digital [ALC268 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
No, I do not use pulseaudio.
Last edited by rud25 (2013-10-13 19:15:09) -
OS X 10.8.5 mac mini hdmi audio output issue
I am running a 2012 Mac Mini with OS X 10.8.5 and my Mac is set for audio and video output via HDMI to my AV receiver / TV. I have recently noticed that HDMI audio output ceases to function once the computer goes to sleep. A full computer restart is required to resolve the issue which is an inconvenience to say the least.
Or is anyone aware of a simple fix?
All my software is up to date, the HDMI lead and connection works fine for video and audio works fine after a restart so it must surely be a software error. Worked fine until the latest OS X update...
Grateful for any help!See > TS4113 Mac mini looses audio output...: Apple Support Communities and others like it, just to the right in More Like This
-
HDMI Audio Output doesn't work in Windows on Retina MBP
When I'm using Windows 7 (with BootCamp) on my Retina MacBook Pro, I like to connect it to my TV using the HDMI out to watch movies. However, when in Windows, it doesn't seem to output the audio to the TV. Instead, it plays through the MacBook's internal speakers. I don't know how to change it, and there doesn't seem to be in option in the Volume Controls in Windows.
Anyone have any success having both video and audio outputted to a TV in Windows 7 on their rMBP? If so, how?Try downloading and installing bootcamp 3.1 it fixed my sound for me.
-
Hi there,
Can anyone tell me how to make make Garageband ignore HDMI as an audio output-device on a 2013 Mac mini i7 using an Apogee jam as an input for bass and a Behringer USB DAC with RCA audio output? Now it keeps on prompting me: Do you want want to use the HDMI device (monitor without audio) for audio output? I'm also suffering massive audio lag issues with the Apogee jam after waking the mini from sleepmode, wich pretty much renders it useless.
Thanks in advance,
Grtz T.I think the easiest way to do this is to have the EyeTV app running in one user account and sent via HDMI to the TV, and use a separate user account for Screen Sharing. Both logins can be active at the same time and with Lion you can connect via screen sharing to which ever login you need.
With regards to the Mac video resolution changing, when it is not the current input on your AV receiver. This is 'normal', if the Mac sees no signal it drops down the a lower level. What you need is to buy a HDMI Detective Plus which tricks the Mac in to always seeing a signal and hence it will not drop down the resolution. See http://www.gefen.com/kvm/dproduct.jsp?prod_id=8005
The Mac mini does have an IR receiver. This can be used with the EyeTV app, iTunes, and similar. Yes I believe EyeTV would run for prolonged periods quite happily, it is has been around for a long time and had most of the rough edges polished off. However one issue you will have to deal with is that it does not automatically update its program guide data. For this you might have to write or modify an AppleScript. Elgato support or their user forums will be a lot of help.
You can set EyeTV to convert recordings to an iTunes (Apple TV) compatible format and then delete them from EyeTV.
The HDMI Detective should solve your handshaking problems. -
Latest Update(s) breaks my HDMI audio output after a sleep
Have a Mac Mini HD, since the latest spate of updates the HDMI audio stops working after a sleep.
A reboot will allow the audio output to work again but this is exactly why I abandoned Windows! So please FIX this ASAP.
Anyone else seeing this?Hi,
Please select the right operating system (32 or 64 bit) for your machine, download and install it:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4062&lc=en&cc=us&dlc=en&sw_lang=&product=5051...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
No Sound on nvidia hdmi audio driven display
I have installed arch on my Dell Dimension XPS 410 with a NvidiaGeforce 210.
out put from lspci
01:00.0 VGA compatible controller: nVidia Corporation GT218 [GeForce 210] (rev a2)
01:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1)
uname -ar out put
Linux shannon 2.6.39-ARCH #1 SMP PREEMPT Sat Jul 9 14:57:41 CEST 2011 x86_64 Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz GenuineIntel GNU/Linux
I have installed nvidia and nvidia-utils how ever I hav e yet to get the hdmi driven audio on my Dynex 32'' Lcd tv which i use as a repalce ment from an older dell 2005 FPW.
My question is how do i get my hdmi fed audio working on the aformentioned LCD tv?
lspci | grep nvidia
nvidia 11783197 40
i2c_core 20165 3 nvidia,videodev,i2c_i801
aplay -l
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
How do i get thiss hdmi audio device working?
Last edited by arch_porter88 (2011-08-02 15:19:06)Try using this command with all the listed devices until you hear sound from one of them.
aplay -D hw:1,9 /usr/share/sounds/alsa/Front_Center.wav
Also, go into alsamixer, press F6 to go to the right sound card, and unmute everything by pressing M (OO means on, MM means muted). For me, I have a similar aplay -l, and for some reason, the correct device for me also hw:1,9 (no clue why there's four of them...), and things like pulse just assume it's 1,3. If you use ALSA, it should be easy to set it up in /etc/asound.conf. If you want pulse, you might have to go into /etc/pulse/default.pa and add a line like this in order for the correct card to show up, it worked for me on my GT430:
load-module module-alsa-sink device="hw:1,9" sink_name=digital_output
Last edited by doorknob60 (2011-08-02 18:10:28) -
Separate audio output from HDMI
Hi,
I connected my iPad 2 through HDMI to my monitor.
The image is very good but unfortunately, my monitor doesn't have speakers so it cannot play sounds and when I connected iPad to monitor, iPad redirected all it's sound to HDMI.
So is there a way to specify to iPad to play sound on it's speakers or 3.5 mm audio output and play video through HDMI?
Thank you,
LisurIs this the adapter you are using?
http://store.apple.com/us/product/MD826ZM/A/lightning-digital-av-adapter?fnode=3 a
If it is, then you have next to the HDMI socket also a Lightning socket to which you could connect any audio system with a Lightning connector.
You may have a larger choice of audio systems for the old 30-pin connector, but then there is this solution:
http://store.apple.com/us/product/MD824ZM/A/lightning-to-30-pin-adapter-02-m?fno de=3a
It's your call now... -
Desperate needing help with HP Pavilion DV7-1450us HDMI audio output
I have tried a lot of different things to get audio output to my tv with no luck. I get video output fine. I notice when right-clicking the speaker on my taskbar there is no option to enable HDMI audio output any help is greatly appreciated as we are waiting to watch a movie <_< thanks.
Hi Sez,
Try using Recovery Manager to reinstall your AMD Graphics Driver package as this will also reinstall the AMD HDMI Audio driver- the procedure for using recovery manager to reinstall Software and Drivers is detailed in the relevant document on the link below.
Recovery Manager - Windows 8.
Recovery Manager - Windows 7
Recovery Manager - Windows Vista
After the reinstallation has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience
Maybe you are looking for
-
I have done all of the steps that Apple have said to do, including completely restarting my phone and registering it as a new one, but still my wifi is greyed out, can anyone help me?
-
Hi, I tried to add a pdf file to itunes and it wont work. I tried selecting "Add File" and it let me selcet it and acted like it was adding, but wasnt in my library under books, or any other tab. I tried this several times to no previal. Then I tr
-
Copy and paste from InDesign CS2 to Illustrator CS3
Hi, I'm a Mac Illustrator CS3 user and having trouble copying text from InDesign CS2 to Illustrator CS3. After copy text from InDesign (allowed), I'll go to Illustrator to paste it, but none of the text appear. I'm not sure if there any other step sh
-
Hyperlink to a single worksheet within an Excel file
How do I create a hyperlink to a particular worksheet within a mulit-worksheet Excel work book?
-
Data getting deleted from screen fields when I Press Enter
Hi Folks, I have a serious Issue need to resolve it urgently. I have created a subscreen in PS Module Prog: SAPLXCN1(Subscreen) Screen: 0600. Enhancement: CNEX0006. I have created a screen and populated the data via search helps, when I fill all the