Assamble , insert , and edit to tape whith blackmagic.

Hello , I have a macpro 5.1 with mavericks , 20 gb of ram and premier 2014 .
When I do an insert or assamble , always gets 2 black frames. Change the offset in device options but still the same
When edit to tape, the premier after 10 minutes or so , closes or freezes the video.
I have all applications closed and disconnected from the network.

check on your audio / video settings that there isn't a tick beside 'different output for print to video' on the AV devices tab

Similar Messages

Missing Format Text, Insert, and Edit Source, etc Options on Some Pages

I’m having trouble understanding why certain pages have more edit options than others. I’m new to Sharepoint Workspace 2010 and I’ve been reading/ researching for answers for 2 days now. I tried to HyperSnap in some pictures however it will not allow me
to until my account is verified and it's not sending a verification email, sorry!
Issue:
On some pages, I have the edit pencil with lots of great edit options such as Format Text, Insert and Edit Source. (This is good!)
On some pages I have no edit pencil, but when I go to Page
à Edit Page à I get few edit options, not including Format Text, Insert or Edit Source. (This is not good)
After reading other somewhat similar posts, I noticed that on the pages where I get lots of edit options, they show SitePages in the URL. Where I get few edit options, SitePages is not in the URL.
Is there a fix so that I can have the expanded edit options in all of my pages? Thank you for your help!

Hi,
In SharePoint we don’t have edit page options [ribbon toolbar page edit formatting options] for all types of page for application page we cannot edit application page like site pages
again the missing edit button might be due to many causes:
Can you verify that it's not a permissions issue? Try navigating to the page in edit mode by appending to the url: your-site/Pages/YourPage.aspx?ControlMode=Edit&DisplayMode=Design
Or you can try this
your-site/Pages/YourPage.aspx? ?ToolPaneView=2
1. You can check that on some pages the ribbon is hidden by default. You need to make it visible by clicking on "Show Ribbon" on the "Site Actions" drop-down menu.
2. You haven't been doing Visual Upgrade (which actually replaces your master page with the v4.master)
3. If you have different master page and may be your master page is not 100% compatibile with SP2010, nor does it use the elements from v4.master (collaboration) or the example nightandday.master
To add the button in your page you could use the <SharePoint:PageStateActionButton id="PageStateActionButton" runat="server" Visible="false" /> (if you've seen already that would generate the button on the left side of
the ribbon)!
Please can you ping the URL of the page and how you crated that page to further assist, we would be happy to help.
Krishana Kumar http://www.mosstechnet-kk.com

How to insert and edit equations with Math Type in IBA??

Hi,
I want to add fractions in IBA with Math Type.
Here is what i found:
And here is the General Preferences
Like you see, i can't select Insert and edit equations with Math Type, it's grey.
How can i use Math Type?
Tx

We have an article that describes not only how to use MathType with iBooks Author (iBA), but also using LaTeX and MathML. http://www.dessci.com/en/support/mathtype/works_with.asp#!target=ibooks_author_m ac
It's important to note that no matter how you get equations into iBA, all equations are represented as MathML in the published iBook. (except, obviously I hope, equations that are simply images that you insert)
If you need more help, feel free to ask here.
Bob Mathews
Design Science

Drop-Frame v. Non-Drop Frame and Edit to Tape

System Configuration: G5 Dual 2.0, QT v7.0.4, FCP v5.0.4, OS X v10.4.6, KonaLH, Keyspan USA-28x USB-->Serial Adapter
Problem: When working with a drop-frame sequence, and editing to tape, the program is edited to the tape with an offset of 3 seconds and 18 frames.
Reproducible: Yes.
Steps to Reproduce:
1. Create a drop-frame sequence.
2. Edit the sequence in step 1.
3. Perform an edit to tape with the sequence edited in step 2.
What should happen: The sequence should be edited to tape at the time it occurs in the timeline.
What does happen: The sequence is edited to the tape 3 seconds and 18 frames after it should be!
Other observations: 3 seconds and 18 frames is exactly how much time is not in an hour of drop-frame time when compared to non-drop frame time. If you drop two (2) frames in every minute that does not end in zero, the math works out to 2*54=108 dropped frames in an hour. For the sake of simple mathematics, lets say there are 30 frames in a second. So 108/30= 3 with a remainder of 18, or 3 seconds and 18 frames.
It's as if FCP is getting confused about drop and non-drop timecode when the sequence is drop-frame. If anyone can offer any insights, confirmation, or resolutions for what I am seeing, it would be appreciated.
Thanks for reading!

This may be related to a "bug" or issue that has been around since FCP1. When FCP is using deck control over firewire, The timecode display will default to DF, even if the tape is NDF. Look closely at the timecode dispays in the edit to tape window. If you see a semicolon before the frames place, FCP is seeing the tape TC as DF. Play the tape until you see the TC display change to NDF, then re-set your in point. This has worked for me in the past.
Hope this helps.

Jittery motion when editing to tape via Blackmagic SD

I have a situation that has me a bit perplexed, and I'm hoping one of you gurus can help. We will shoot DVCAM footage, capture into FCP (now at v5.03, but this occurred with earlier versions as well), and then export a quicktime movie (not using QuickTime conversion). I then bring the movie into After Effects, and do some compositing work, and render using Uncompressed 8 bit settings. I create a new sequence in FCP with matching settings (uncompressed 8 bit), and import the movie file I created in AE. Everything looks great on my computer monitor, but when I edit to tape, any moving objects (either effects or people in the video) jitter visibly when viewed on my broadcast monitor, and the resulting BetaSP tape. There are no unrendered sections of the sequence, and the the frame dominance is the same on the imported clip and the sequence.
I can apply the de-interlace filter in FCP, and that improves the image somewhat, but it's still visible.
Any suggestions?

... and the the frame dominance is the
same on the imported clip and the sequence.
it seems that the filed dominance is wrong:
upper or lower field dominace is determined by your blackmagic card and the codec used.
in your sequence settings use easy setup to load the correct settings for the codec you are using with your blackmagic card. after that, read what the field dominance is set to. use the same field dominance when rendering in AE.
good luck,
kurt

How best to Convert, and edit video tape to digital

I want to convert, and edit VHS and Betamax video tapes to digital. My research indicates that there are a number of ways to achieve this, including:
1. A video recorder with a hard disk and DVR (Which?)
2. The "pass through" feature on a MiniDV camcorder (Discussion Sites)
3. EyeTV 250 Plus (Magazine)
4. Canopus' (ADVC300), which “cleans and stabilises analogue video before conversion so the digital is a higher quality than the original analogue” (Magazine and Discussion Sites)
Some claim that an S-video connection is essential for best results.
Can an expert advise the best solution?

I have a Canopus ADVC-300 that I use when digitizing VHS and Hi8 material.
It works quite well. The included software allows you to adjust the quality of the image as it is being converted.
Connect the tape deck to the ADVC-300 using SVHS cable and an audio RCA cable then firewire between the ADVC-300 and your mac. Turn on everything and launch iMovie to capture the playing video stream.
If you have technical questions regarding iMovie and or iDVD, each has a specific forum here on the Apple Discussions site.
Good luck,
x

Black frames/ flashes on playback and edit to tape

I am painfully getting a black flash rather than a frame in the video AND audio throughout play back and going to tape. it isnt a black frame on the timeline. Ive tried boosting the ram, cleaning up the hard drive, media share and media drive but still it happens randomly and 'usually' when im going to tape under pressure for time!! please please help if you can thanks

check on your audio / video settings that there isn't a tick beside 'different output for print to video' on the AV devices tab

Inserting and editing commands

Hello adobe
I have an problem with adobe after effects cs4, I can't edit the comands like in this picture
So I cant write the commands like in this picture and the expression slider has no spiral to move to channels edhe slider control

It's hard to tell with a question like this whether you know the basics and are hung up on a detail, or whether you don't know the basics. This makes it hard to answer your question.
I'm going to assume that your problem is that you don't know how to add and edit expressions. So, I'll direct you to read "Add, edit, and remove expressions". Or perhaps you'll get off to a better start by watching the video by Chris and Trish Meyer linked to from this page: "Expression basics"

Insert and Edit NEW text not working

hi guys,
I would like to insert a new text. I thought i could use the touch-out tool but i can´t don´t know why. I did it with the typewriter tool. So the text is this
now i try to change the font type but i can´t. I do not get the Typeface Menu as the Acrobat Help says.
http://help.adobe.com/en_US/Acrobat/9.0/Professional/WS58a04a822e3e50102bd615109794195ff-7 c7c.w.html
Indeed i do get it in the original PDF text but not in the new one.
I made a PDF from InDesign, i don´t have the original file with me now but i suposse i can edit the resulting PDF. I am reading Adobe online help but doesn´t work. I have Acrobat Pro 8.
Any help or ideas?
Thank you,
S

thanks for the good info CtDave. I thought that even Acrobat 8 Pro would let me introduce a text and change its font type without too much trouble. I see that i can change the font style from the original pdf texts but NOT from new inserted text. For i moment i thought it was something related to the PDF Security or Editting settings but that is not the case since there is no restrictions.
I guess i will keep trying to see what is wrong just for the learning process

Insert and edit screen shots in RH

I am using RoboHelp HTML 6 to write a help document which
requires lot of images.
I am reluctant about the imaging part as I really don't know
what would be the best way to insert the images in RH. I have these
options - Using Word or Paint of then RH screen Capture and Resize
tools.
I am quite use to of using Word because prior to using RH I
was using Word for writing the document and this is how I was
working with the screenshots in the Word document:
I would take the screen shot of Web application, save it in
the Paint as jpeg file, insert the jpeg file in Word and further
more add an arrow and a text box on that screen shot in Word and
make it as a group for easy to move. There are times; I would also
resize the screen shot in Word by selecting the screen shot and
dragging the image resize handle, located at the lower-right
corner.
Please, can anybody who deals with lots of images in RH can
guide me.

Hi SangyD
Have you looked at the Tools tab at the bottom of the left
side of RoboHelp HTML? If not, you will probably be pleasantly
surprised to see that RoboScreenCapture (RSC) has a home there. RSC
offers all of what you are looking for at a VERY attractive price.
It's included at no extra charge!
Cheers... Rick

Manual Chapter Marker Insert and Edit

The dragging and dropping of chapter markers is nice feature. However, is there a way to just enter the chapter markers manually by typing them in through a window of some sort. I know where all my chapter markers generally need to go. It would go a lot faster if I could just rapidly type them in and then use drag and drop to adjust as need be. The track pad is not very well suited for large numbers of markers.
In fact, is there a way to manually edit the location of a marker so I don't have drag it around.
And if this feature doesn't exist, why not?
Thank you
Message was edited by: coyotepup4

Thanks for taking a look, I am pretty new on a Mac, is this the data you need?

When I insert and edit in between two clips instead it goes to the audio portion

I am having issues with my final cut project everytime i decide to select insert edit it goes into the audio section I have tried multiple time what do u recommend thanks!!

Do your buttons look like this?
Press Shift-1.

Edit to tape confusing drop frame and non drop frame

This is a re-creation of a dead thread I found from June 6, 2006. This is the exact problem this other user was having.
OS 10.4.7
FCP 5.0.4
Dual G5 2.5
4.5 GB RAM
KONALH
Trying to edit to a Sony DVW-A500 (Digibeta) in Drop Frame mode.
Read Below for deets.
Problem: When working with a drop-frame sequence, and editing to tape, the program is edited to the tape with an offset of 3 seconds and 18 frames at the end of one hour.
Reproducible: Yes.
Steps to Reproduce:
1. Create a drop-frame sequence.
2. Edit the sequence in step 1.
3. Perform an edit to tape with the sequence edited in step 2.
What should happen: The sequence should be edited to tape at the time it occurs in the timeline.
What does happen: The sequence is edited to the tape 3 seconds and 18 frames after it should be!
Other observations: 3 seconds and 18 frames is exactly how much time is not in an hour of drop-frame time when compared to non-drop frame time. If you drop two (2) frames in every minute that does not end in zero, the math works out to 2*54=108 dropped frames in an hour. For the sake of simple mathematics, lets say there are 30 frames in a second. So 108/30= 3 with a remainder of 18, or 3 seconds and 18 frames.
It's as if FCP is getting confused about drop and non-drop timecode when the sequence is drop-frame. If anyone can offer any insights, confirmation, or resolutions for what I am seeing, it would be appreciated.
Thanks for reading!

So is the timeline a drop frame timeline, starting at 1:00:00:00?
And then is the DBeta tape prestriped (at least enough to do an assemble edit) to start the program at 01:00:00:00?
In other words, is the FCP timeline timecode matching the Dbeta tape timecode in a 1:1 relationship before you attempt to Edit to Tape?
Thinking further: FCP can't really confuse the two timecodes, it's dependent on the operator to tell it what to do. When it outputs it's not outputing timecode or looking even really looking for timecode. It's looking for your IN point in the Edit to Tape tool.
Message was edited by: loyed256

Transfer and edit of VHS tapes

I am re-starting a delayed project I began several months ago, transfering and editing VHS tapes to DVD. The support from the forum was extraordinary, and I'm recreating what I learned to begin anew.
There is one item that I never was clear on, but would be key as I manage the initial transfer process:
Would it be overall more efficient to (1) transfer each VHS in its entirety, and then select/edit digitally clips that will find their way into a final file for DVD, or (2) go thru a painstaking process of choosing and transfering individual clips directly from the VHS player? Note that I'll probably wish to transfer the tapes in their entireity anyway for archival purposes.
I have upgraded to WD Caviar Black drives to reduce latencies, etc. but am not sure that working on large files will be efficient. Also, I'm currently using PE ver 4. Is there annything in later versions that would make an upgrade compelling?
Some real-world perspective would be much appreciated.
Thanks,
Julian
PS: I'm discouraged to not be able to find a record of my prior communications with all the fine advice from the forum. Am I missing something?

The one drawback to the model 55 is it is one way from tape to computer
If that is the only direction you wish to use, you don't need the more $$ two way model
Do also plan ahead for offline storage... IF you think you will ever need the AVI files again
DV AVI is about 13gig per hour, and 1 or 2 Terrabyte USB drives are a good way to store many hours of files when you are done (if not edit, due to transfer speed)
Also... use that USB external to make a FULL backup of your boot drive
Hardware crashes or virus infections happen, so you should buy AND USE software to make a full backup of your hard drive to an external USB hard drive... plus, making step-by-step backups during a new install or major program addition makes it easy to go back a step if something doesn't work
This backup and then restore is, of course, only to the same computer with a new drive (or the same drive as long as you don't mind writing over everything) since doing a restore to a new computer won't work due to Windows and many programs having activation information that is keyed to your hardware (which is why Windows will force you to RE-Activate if you change very much hardware)
The product I use is at http://www.terabyteunlimited.com/image-for-linux.htm
Image runs off of a bootable CD via Linux (the Zip you download includes a program to make the bootable CD) and it reads EVERYTHING on the drive, even the hidden registration information, so everything is restored when needed... and you may restore the image to a brand new drive in case of a crash, and not have to re-install anything
Please note that I own no part of Image, and I don't get a referral fee (that is just a plain web link) but I use the program and it has saved me a LOT of trouble when I had a hard drive die... and I was able to restore everything and not have to re-install or re-activate a single program, from Windows on up

'edit to tape...' I can't see anything on my cameras screen

hello. am trying to export edited footage from FCP5 back onto the DV tape using the camera. however I can't get a picture. this is the first time i've used this particular camera. it's a canon xm2. any idea what settings i need (on both camera and FCP) to solve the problem??? cheers.

you'll have better luck with Print to Video instead most likely. read about the difference between this procedure and Edit to Tape in the manual. the manual is usually good place to start with issues like this.
as i've never laid eyes on that camera, i would surmise the procedure is the same for most all cameras: enable VTR mode, enable the firewire port as an input in the menu if this is needed and seeing this is a canon piece of gear, you'll probably want device control to be set to firewire basic

Assamble , insert , and edit to tape whith blackmagic.

Similar Messages

Maybe you are looking for