Assembler not showing up after ATG 10.1.1 integration with endeca

hi,
I am getting the following error while trying to access assembler from http://localhost:8080/assembler/
2013-01-11 10:55:19,806 ERROR [nucleusNamespace.atg.endeca.assembler.droplet.InvokeAssembler] (http-127.0.0.1-8080-3) A problem occured assembling the content for content item /pages/browse. The response received was {contentUri=/pages/browse, @type=ContentInclude, @error=FileNotFound}. Servicing the error open parameter.
2013-01-11 10:55:19,807 ERROR [nucleusNamespace.atg.dynamo.servlet.dafpipeline.DynamoServlet] (http-127.0.0.1-8080-3)
java.lang.NullPointerException.
I have created the pages in experience manager as per the ATG Endeca integration guide (Have created three endeca apps). I can view the catalog data in Endeca jsp ref.
Can some one tell me if am missing anything here?
Thanks,
vasanth

Try the following.
-cd into /var/imap (or wherever your cyrus database - not the spool) is.
-inside there is a directory called user, which in turn contains directories for each letter of the alphabet. if you look inside r (for robert) you should see files called robert.seen, robert.sub, rob.seen, rob.sub.
-stop mail services and delete the files.
-start mail services and fire up Mail.app while keeping fingers crossed
Failing that, you will probably have to reconstruct the whole database and not just the user.
Message was edited by: pterobyte

Similar Messages

  • OHS 11gR1 web-page not showing up after creation, registration of webgate

    Hello there,
    The OHS webpage on host:7777 is not showing up after I created, registered the webgate on oam 11g console. I copied the 2 artifacts into the ohs proxy server box in the webgate/config folder and restarted OHS instance but now, the ohs page won't show up. The opmn status says its alive but it doesnt show up in the browser.
    I have oam 11.1.2 installed with webgate 11.1.2 and ohs webtier 11.1.1.6.0. Am I missing any step? Do I need to create a authentication scheme before I check it? Please advise to the earliest convenience.
    Thanks!!

    Hi,
    You need to create authentication scheme. also create resourse for index.html page in OAM console and add it to protected resourse list. So when you will access OHS with 7777 port it will redirect to OAM SSO page, after successful login it will take you to the home page of OHS.
    mark, if this helps.
    Regards,
    Kishore

  • The templates are not showing up after I select them???

    the templates on pages are not showing up after I select them....unless I highlight the entire page and select a particular colour.  That leaves all the colours in the photo off.  Any help would be so very helpful.   

    CeraG - It will help to answer if you supply your system version, pages version and if you lately have done anything to the computer (installing, uninstalling etc)
    I think you have forgotten to do a Software update or it could also be a font problem but more info from you is needed!

  • Why are contacts not showing up after added

    why are contacts not showing up after added. Don't show up after they added when I want to select then for a new email

    I am replying to my post with the hopes that someone can please help me!
    I am adding new episodes, but they don't show up on the main page. The most recent one to show up is from 10/29/07. I added a new episode today, but it doesn't appear on the main page (before you subscribe). Is there a limit to the # of podcasts that can appear on the main page? Has anyone else had this problem? All the relevant info is above.
    Your help is much appreciated.
    Message was edited by: oneness_podcaster

  • Why is it not showing anything after I plugged in my USB hard drive? I cannot locate the drive in my macbook. FYI this happened after few times using it.

    I need help as I am new to IOS.
    Currently it is not showing anything after I plugged in the hdd to my mac book.

    I had the same exact issue, which you can see in another forum.
    I "killed" both my MBP and my wife's MBP by plugging in my iPhone and getting a  message about USB drawing too much power.
    It was not fixed by using an SMC reset.
    I DID fix it by unplugging the battery, I left it unplugged long enough to remove the RAM, HD and put some RAM and HD back into place. (I initially swapped the RAM and HD from my MBP into my wife's MBP.
    After that everything was good, although upon first boot, some apps crashed because of the "system date" being set to a date before 2000. I forget the exact date, but it will be some time in 1984, the birthdate of the Macintosh. It is not a big issue, just correct the date and time.
    If you are curious about that date, copy a large file on your drive and look at the CREATED/MODIFIED date....it will show this same date, until the copy is complete, at which time you will see the correct one.
    Once again, try to disconnect your battery, very carefully by lifting up the connecter evenly on both sides to avoid damaging the connector or the board.

  • HT4623 itune is not showing iphone after updateing to IOS6

    itune is not showing iphone after updateing to IOS6

    Have you tried the Basic Troubleshooting Steps...
    Restart... Reset... Restore from Backup...  Restore as New...
    Restart / Reset
    http://support.apple.com/kb/ht1430
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414
    If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...

  • Contact addresses not showing up after upgrading to ios 7

    Contact addresses not showing up after upgrading to ios 7

    Contact addresses not showing up after upgrading to ios 7

  • Lacie Rugged external drive will not show up after Yosemite update.

    Lacie Rugged external drive will not show up after Yosemite update.  It show up in disc utility I can't access it.

    I have the exact same issue. Have you had any luck with a solution?

  • I am trying to update a chart in Pages that I created in Numbers, but the refresh button does not show up after I save the Numbers file. Thoughts?

    I am trying to update a chart in Pages that I created in Numbers, but the refresh button does not show up after I save the Numbers file. Thoughts?

    It is hard to exactly understand what you have  done or not by you one sentence description. My thought is have you read in the Pages User Guide? Here is what it says about updating a chart in Pages:
    Updating a Chart Copied from a Numbers Document
    If you’ve created a chart in Numbers, you can copy it and paste it into your Pages document. After it’s been pasted into Pages, the chart remains linked to the data tables it references in Numbers. To change the chart data, open the original Numbers document and edit the data there, save the Numbers document, and then refresh the chart data in Pages.To update a chart after you’ve updated its linked Numbers table:
       Select the chart on the page and click the Refresh button that appears.
    Note: You must save the Numbers document before copying and pasting your chart into your Pages document and after editing the Numbers data tables that the chart references.
    I hope it has helped you.

  • LR5 - Watermark does not show up after exporting...??

    Does not show up after exporting...?? Any ideas???

    ccherrry wrote:
    Any ideas???
    Yeah, provide some details.
    Version 5.0 or 5.2RC?
    Mac? PC?
    Simple Watermark?
    Watermark Editor Created? Text-based? Graphic-Based
    Export format?

  • TS2570 Mac will not start up after software up date, just screen with Apple logo and spinning icon?

    Mac will not start up after software up date, just screen with Apple logo and spinning icon? I have tried safe start up, unplugged all other cables, no luck?

    How to Perform an Archive and Install
    An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

  • Table not showing data after refresh

    Hi gurus ,
    A unique problem We have added a field in the custom table . once moved to quality system it is not showing up the data whwn when we do a select query on that table in se16 . say total entries are ten thousand four of them are checked and when display not checked i.e eq space we get just 100 entries on number of entries ..i asked to regenerate the table in quality system but it did not help .The Quality system was refresh 1 month ago and we see it not working after it ..please suggest the correct steps we need to perform  to recover the data . Adjust database with keep data has already been done ...

    Hi Anjaneya Bhardwaj,
    If I understand well, your issue is that you have a SELECT in your program, saying newfield is your newfield, something like:
    SELECT ... FROM ztable INTO ... WHERE newfield = space.
    and it doesn't return the records that existed in quality before newfield was added.
    It it because, by default, when you add a field to an existing database table, with records already present, they are assigned the NULL value, which is different from space.
    They can be retrieved using WHERE newfield IS NULL.
    Usually, to avoid this issue, when we add a new field, we tick the "no null value" checkbox for this new field, in SE11 transaction. That will initialize the field of existing records, to the initial value (space for characters, 0 for numeric fields, etc.) Note: maybe it can be counter performant for big tables...
    Solution for your issue, run this code once:
    UPDATE ztable SET newfield = space WHERE newfield IS NULL.
    BR
    Sandra

  • My imported backup html files from another computer do not show up after import

    I am currently transferring files from my macbook pro to a pc netbook. I already exported my firefox bookmarks via an external drive and accessed the html file on my new netbook. After importing the html on firefox on my new netbook, the bookmarks do not show up on my bookmark list.

    Please see this article on how to move your bookmarks and settings from one computer to another: [[Moving your Firefox bookmarks and settings]].
    Caution: Restoring bookmarks from a backup will overwrite your current set of bookmarks with the ones in the backup file.

  • Mail not showing accounts after ios 7 update on iPhone 5

    After the ios 7 update to my iPhone 5 mail does not show my accounts. Specifically there is nothing below the word Accounts. The rest is working fine and still connected to my three accounts. However it no longer shows accounts.

    thanks for the suggestions, i tried the ideas you suggested but i dont even get a camera showing for the rear camera, i also noticed the torchlight no longer works.  i did all the steps but no luck.
    So I took my camera to the genius bar this weekend as well as walking through various steps with the apple guys in ohio support over the net. 
    With the guys at the genius bar, after i insisted that it must be software as the rear camera stopped working only after the softwre update, they continued to assure me it was hardware and talked me into letting them replace the camera,  they then took it to the back and tried fixing a camera and 30 minutes later came out and said the rear camera is no longer being detected and wanted me to replace the motherboard for yet more money.  im glad they didnt charge me for the new camera though as it still didnt work.
    anyway the motherboard idea i rejected as it was just 2 months out of warranty and had only stopped working the day after the release of 7.0.2, so im going to wait until the next few releases to see what happens, as i dont believe for a second its hardware.  i expected a stock answer from apple and its exactly what i got even after my explanation of how it was working the day before the release.  not overly impressed with the whole process.
    i wanted to back down to 7.0.1 to confirm the camera still works but they said no chance so i cant even see if it still works ouside 7.0.2.  anyway will update if i get any further progress.

  • Texts are not showing up after upgrading to version 11

    Could someone help me with why some of my texts are not show up on my Flash project? Before the upgrade, everything is fine. However, after upgrading to version 11, my texts are disappearing.
    Before (version 10.3.183.7...)
    After (version 11.0.1.152...)
    The texts in the boxes will disappear, when I hover mouse cursor over it. Those boxes with texts in them are created with an external AS file, and the texts are dynamicaly changed/put in with an external XML file. There is a mask on the boxes, show only 4 at a time.
    Demo: www.ethanslin.com/portfolioWorks/flashWorks/demo/
    You will see the changes with Flash player version 11, and everything working fine with older versions.
    I use iMacs with Snow Leopard and Lion, and this happens on all of the browsers with Flash Player version 11.01.152. I also tested on Windows 7, and it is still happening. Is this a Flash Player bug or something changed that I am not aware of? Is there a work around for this?

    This is a known issue and we have a fix for this in our next release. Thanks for posting.

Maybe you are looking for