Assembley Processing Sales Order date not pulling through as finished date

Hi
I have a small issue. We are using Assembley Processing in SAP where the Sales Order creates a Project / WBS / NEtwork Order automatically.
If I look on the network order there is a clear link between the order and Sales Order and it also has the requested delievery date in there which is correct however the network order finish date is completley wrong.
The scheduling settings are backwards and lets say the delievery date is 01.04.2011 and and it takes 1 month to finish the project therefore it should start on the 01.03.2011 yet the finish date in the Network Order is way in the future. E.g. it is starting on the 01.05.2011 and finishing on the 01.06.2011 which is wrong.
It seems like it isn't even considering or looking at the customer delievery date.
Regards
Adeel

Dear, I am aware of this
And there is no point doing it manually or there is no point using Assembly Processing.
But why i asked you to schedule the network manually, is to find where the problem really lies. If you are able to schedule the network manually and derive the result as desired, then you can conclude that nothing wrong in network scheduling and its parameter and the problem would be the flow of date from SO to network.

Similar Messages

QM Notification: task end dates not pulled through from response profile

Hello,
I am experiencing a problem with the end dates of the tasks in QM notifications not pulling through (from the response profile) when tasks are determined.
When I do the simulation of task determination, the gantt chart shows all the tasks together with the end dates. But when the actual determination is done these dates are not populated in the planned finish date fields.
I have double checked the configuration: priorities, response and service profiles are set up correctly. I have also searched SAP notes without success.
I thank you in advance for your responses.
Kind regards,
Theo.

Yes, I know, but as far as I understand binding the values back from rule to the workflow is something that doesn't work. I have never tried it, but I have seen posts here about people complaining that this kind of binding does not work.
Have you tried to bind for example some hard coded value back to the workflow (something that should definately work)? Does it work? If not, I suggest you to ask this from SAP that is it supposed to work and if not, why do they have this option to for binding from rule to workflow. Or then just forget what you are trying, and use some of the suggested workarounds.
Regards,
Karri

Purchase Order price not pulled through from Purchase Requisition.

Hi:
The Valuation Price on my Purchase Requisition does not pull through to the Purchase Order.
All the settings on "OMET" and my user profile seems to be set but still I get an error - No conditions determined (no authorization for input)
when I enter a tax code on the PO.
All my other authorizations are also okay.
What can the problem be.
Thanks.
W.

Maybe you should explain all steps YOU have done, instead of saying "yes I have done that", As this function works for many many companies without any problem, it is either an issue with your enties, or it is a bug in the programs.
For a bug, you should search OSS notes and open a message to SAP if you cant find one that solves your issue.
the authorization part of this message relates to the functional authorization, and cannot be seen in SU53.
The error is issued in these 4 cases:
   IF t160d-erfin EQ space AND ekpo-repos NE space.
      MESSAGE e235.
IF t160d-eprsz EQ space AND ekpo-repos NE space.
      MESSAGE e235.
IF ekpo-netpr EQ 0 AND ekpo-repos NE space.
and
    IF t160d-erfin EQ space.
      MESSAGE e235.
   IF ekpo-netpr EQ 0 AND ekpo-repos NE space.
and
    IF t160d-eprsz EQ space.
      MESSAGE e235.
so you only need to provide the values of following fields:
T160d-ERFIN
T160D-EPRSZ
EKPO-REPOS
EKPO-NETPR
Edited by: Jürgen L. on Jan 24, 2012 1:11 PM

SALES ORDER CAN NOT BE LESSER THEN POSTING DATE

Hi everyone
Can any one tell how can I restrict sales delivery date less then posting date. Like if user create a sales order on 22,03.14 then delivery date should not be before 22.03.14. I saw in system if I enter sales delivery date before 22.03.14 then system accept the date

Hi,
Try this:
IF @transaction_type in ('A') AND (@OBJECT_TYPE='17')
BEGIN
If exists (SELECT t0.docentry FROM ORDR T0 WHERE T0.[DocDueDate] < T0.[DocDate] and T0.DocEntry = @list_of_cols_val_tab_del)
Begin
SET @error = 10
SET @error_message = 'Not allowed to enter delivery date less than posting date'
End
End
Thanks & Regards,
Nagarajan

Billing date in sales order should not be modifiable to backwards dates

hi gurus
I have a requirement where in few users while creating a sales order , they should not be able to modify the billing dates to previous dates . So that particular field shd not be modifiable . Could use some help here .
Regards
JNM

Dear JaganNM,
While creating the billing document in VF01 the billing date will be changed manually by the user.
This change will not applicable in sales order.
Once you save the billing document you can't change the billing date in sales order ,it will be graded out.
Before saving the billing document only the date can be changed in sales order.
Let me know if you have any further clarifications.
Thnaks&Regards
Raghu.K

Org Charts not pulling through complete internal order numbers

Hi Team
Can u please help me to overcome my issue
Here is my issue -
Can someone please investigate this issue - the internal orders are not pulling through to the Org Charts correctly.
As per this screen shot, Michelle Morgan is on internal order 4000035.
However as per this next screen shot, this information is not pulling through completely (it is only showing 40000).
I.e one employee the cost centre / Internal order on R3 is showing as one number and on portal it is shown as a different one

The only reason to resettle the orders is that the "settlement rules" were revised in the current fiscal year . In the current fiscal year , the settlements for each settled period (closed period) are reversed and then resettled in the current open period using the revised settlement rules. However, the issue involves these same orders had costs in the previous fiscal year and were settled originally in that previous fiscal year with the old settlement rules. This is a closed fiscal year and all periods are closed.
Any thoughts on a system approach to effect the settlement rule change crossing two fiscal years rather than manual entries for prior fiscal year settlement rule impact as a two step process the first step being the current fiscal year resettlements and the second step the manual entry for previous year impact ?

Sales order does not extract plant information from material master data

Hi experts,
I have created a sales order. However, the plant in the shipping tab can only be manually entered.
I have made the check:
the customer material master data does not have the plant info.
the customer master data does not have it either.
It is defined in the material master data: sales:general/plant
But the sales order did not extract this information. Why does this happen?
Thank you in advance.
Best regards,
Fan

Hello Friend,
As right stated by you,
The Plant will be copied from the master data to the sales order, if not it should be manually entered
The Sequence System will search for the Plant is as follow..
1. Customer material infor record, If it was not maintained then it will search in
2. Customer master, if the entre was not maintained in the SHIPPING TAB
3. Finally it will search in the Material master in the Sales organisation data 1 in the field DELVERING PLANT field.
So please search whether the entry was maintained in that field at the sales:sales organisation data 1.
This might be the issue.
Please revert if you want further details
regards,
santosh

Required delivery date in sales order shoud not be less than the inhouse pd

Customer Requested Dates (CRD) entered in orders are often shorter than Product form wise lead time.
Logic to be configured in SAP : SAP should capture the CRD as per the lead time of Products or Date entered by sales persons (whichever is later).
Required delivery date in sales order shoud not be less than the inhouse production lead time.
Please help.
Regards

IMG - Sales and Distribution - Basic Functions - Availability Check and Transfer of Requirements - Availability Check - Availability Check with ATP Logic or Against Planning - Carry Out Control For Availability Check
Here select the combination of your Availability Check & Checking Rule.
Under Replenishment Lead TIme, you need to put a Tick Mark in the Check Box of "Check without RLT"
This will make sure that system considers either the Requested Delivery Date or actual Material Availability Date, which ever is earlier.
Hope this helps.
Thanks,
Jignesh Mehta
Edited by: Jignesh Mehta on Nov 9, 2011 12:18 PM
Edited by: Jignesh Mehta on Nov 9, 2011 12:23 PM

Sales Order does not show up at the resource level.

Hi guys,
I have a flour mill of having 4 processs (resources)
1). Tempering (cleaning).
2). Milling.
3). Blending.
4). Packing.
I have two identical sales order. One has been through all the process (resources) and showed in the DS Planning board but, other one has not shown up there. It happens to me couple of times that such sales order do not show up at the resource level. Where should I check and correct? Aslo which way can I follow up these missing sales order? and What shoud I do if this situation happens?
Thanks
Shaan.
Edited by: Shaan313 on Sep 27, 2011 8:22 PM

313,
https://service.sap.com/sap/support/notes/1406120
Since you asked the question, I can assume that you don't have an "S" number. speak to the person in your company who administers your SAP Service Marketplace account (this is usually someone on your Basis team), who can obtain one for you.
Or, you can try on your own. A few stars have to be in alignment for the second method to work.
https://service.sap.com/request-user
Best Regards,
DB49

EDI Sales order creation in CRM through inbound IDocs from non SAP system

Hi Friends,
We are having a scenario where we need to create a Sales Order in CRM for a B2B EDI transmission through IDoc. Customer is sending the EDI Transmission of his Sales order , which is passing through PI and then reaching to CRM to create a Sales order.This is the design we need to follow to make it happen,we are initially trying to create an order using WE19 for testing and the details are:
Basic Type - CRMXIF_ORDER_SAVE_M01
Message Type - CRMXIF_ORDER_SAVE_M
Functional Module - APPL_IDOC_INPUTI which is automatically giving a status text as " Function module CRMXIF_ORDER_SAVE has been called successfully", but no sales order is saved in CRM.
We are getting idocs posted successfully with status 53 with the statuses sequence 74, 50 ,64, 62 and 53.Our issue is inspire of the Idoc having status 53 and the FM called successfully we are not seeing the sales order created in CRM.
We are stuck here no sales order is created in CRM.
Are we missing any config. - set up - Prerequisit - Any OSS note need to be applied -- ANy middle ware setting ?
Any help will be greatly appreciated.
Thanks
Vijay

Hi Christophe,
Awesome!!!!!! it worked, You are the best.
I could able to create a sales order in CRM,but below are the valid data I passed in the respective segment fields.Except for first 3 values rest all did not get reflected in teh Sales order.I feel i am missing some qualifiers.
Can you kindly share the IDoc data to be passed in...along with respective segments and fields:
Segment                                                 Field
E101CRMXIF_BUSTRANS     OBJECT_TASK
E101CRMXIF_BUSTRANS     PROCESS_TYPE
E101CRMXIF_BUSTRANS     POSTING_DATE
E101CRMXIF_PARTNER                          PARTNER_NO
E101CRMXIF_PARTNER                RELATION_PARTNER_NO
E101CRMXIF_ORGMAN         SALES_ORG
E101CRMXIF_ORGMAN          DIS_CHANNEL
E101CRMXIF_ORGMAN         DIVISION
E101CRMXIF_SALES             PO_NUMBER_SOLD
E101CRMXIF_SALES            YOUR_REF_SOLD
E101CRMXIF_SALES            PO_NUMBER_SHIP
E101CRMXIF_BUSTRANS_ITEM     ITEM_NUMBER
E101CRMXIF_BUSTRANS_ITEM     ITEM_TYPE
E101CRMXIF_BUSTRANS_ITEM     ORDERED_PRODUCT
E101CRMXIF_PRODUCT_I     PROCESS_QTY_UNIT
E101CRMXIF_PRODUCT_I     PROCESS_QTY_UNIT_ISO
E101CRMXIF_PRODUCT_I     BASE_QTY_UNIT
E101CRMXIF_PRODUCT_I     BASE_QTY_UNIT_ISO
E101CRMXIF_SCHEDLIN_I     ORDER_QTY
Thanks a ton in advance .
Vijay

Sales order qty not updated in copa

Hi Gurus,
My client has activated Costing based COPA.
We have activated Incoming sales orders with option
Transfer with date of deliery/scheduled billing date.
When We are posting sales order we are able to see a copa document with record type A.
In that document we want to see the Sales order quantity or delivery quantity, delivery date fileds.Please let me know what all the value fields We need to assign.
Do I need to write any derivation rule for incoming sales arders also.
we are able to capture the total price, material etc from the sales order in COPA document.We need only sales order qty or Delivery qty or delivery date to be updated in COPA document.
Please suggest me
Regards
Chaitanya

Hi Chait,
Pl check whether your client has assigned SD Qty Fields to COPA Quantity fields in KE4M. Sd quantity fields are FKIMG- Billed Quantity, KWMENG-Order Quantity and the same shall be assigned to ABSMG-Sales Quantity. If not, please maintain the same. Otherwise, we need to look for some other work around solution.
Trust this resolve your problem!
Cheers!

Sales order qty not confirmed when delivery done with partial qty

Hi Guru's
Need your help............
We have issue in drop shipment scenario process. Sales order created with 10 line items from CRM and order released from CRM and replicated order to ECC and backend created PR also. After that user set reject status for all items so that PR line items also deleted, again user released rejection status for all items and line items updated in the same PR with different line item number for materials then PO & GR also done in ECC and stock also allocated for sales order line items but still sales order qty not confirmed in CRM sales order.
I checked all configurations regarding availability check but could not found.
Example:
Sales order line item qty: 4 - 2 qty confirmed (delivered).
For remaining qty (2 items)I have done GR. After GR It is allocated to sales order but it is not confirming the order quantity.
plz help me to fix this issue?
regards
sai

Hi,
Please check In ERP transaction OVZJ, for the sales org, distribution channel, and division that is being used in the affected sales orders, set the Avail. Check Rule to 'E'. Then retest the issue, as this might help.
Regards
Gavin

Open Sales Order values not getting updated after run RVKRED77 & RVKRED88

Hiiii,
In Production Server. We run the reports RVKRED77 & RVKRED88. Credit info structure and and Open Sales Order values not getting updated. In FD32, Status - Sales value it showing '0". At the time of creating Sales Order Dynamic Credit check not happening coz of Tables S066 not updating. Please provide me Solution.
Best Regards,
Sridhar . P

Dear Heagal,
I followed your suggestions and implemented in the Development and moved the changes in to Quality Server. I tested it thoroughly by creating New Customer and maintained Credit Limit. I come to know that Problem is in all Servers. I made 3 changes.
1. In Pricing Procedure Sub Total A it was not maintained against Net value. I placed it.
2. Removed Credit groups for Delivery Type.
3. In OVA8 i maintained Max. Doc Value :99,999,999.00 before it was with 1.00
I checked the OMO1 Settings it was Asynchronous. As SAP Notes Suggesting to use Synchronous but here it's a client setting. So, It's Can't possible to change. Changes will affect other Company Codes.
Tested both in DVP and QTY Dynamic Credit Check is working Perfectly and Status in FD33 Sales Value field getting update.
If i move these changes in to Production, Will i need to run the reports again or not? How it will affect on Old Cusomer Billing and Credit Limit data. For few of the Customers the Credit Limit data it was exceeded. Please provide me advice. The issue need to be Solved immediately.
Best Regards,
Sridhar

Some Sales Orders are not replicating into CRM

Hi guys,
when I check SMQ2 in CRM, I find that some sales orders are not replicating into CRM, then check the error, its says check SMW01..
when I check the SMW01 it says validation error and BDOC status is F05 (information no processing). I tried to search the sales order in CRMD_Order transaction could not find the sales order...
*Error in SMW01*
Processing of document with Guid E01D11C71856C4F1AEBF0024E84DD0CE is canceled CRM_ORDER
Validation error occurred: Module CRM_DOWNLOAD_BTMBDOC_VAL, BDoc type BUS_TRANS_MSG. SMW3
It's not giving much clue what's the error is...
I tried to setup a request to replicate those sales orders.. those request also end up in the same error...
any help on this?
thanks,
Ken

Hello Ken,
When reprocessing a BDoc(via SMW01) you might need to set a flag.
Goto trxn. SMW01. Start the debugger using command '/h' and reprocess the BDoc. After going into the debug mode press SHIFT+F7 and put a breakpoint at 2nd Tab in : class:cl_smw_flow and method 'restart_processing'. Keep debugging(F5 or F6 accordingly) until you find the requisite flag l_retry_allowed and set it as 'X'. This will allow you to reprocess the Bdoc.
Thanks,
Rohit

Sales order values not coming in copa report can been seen in ke24

hi
i have did sd and billing and actual settlement through va88
i can able to values in ke24 actual line items.
but when i cant able to see values in ke30 copa report aganist sales order characteristic
and aganist record type A values are not flowing in copa report.
please help me.
thanks
kareem

hi ajay,
i have again prepare actual line items report from ke94 ,ke91 and executed report ,
here for that particular sales order values are flowing through record type C but not flowing for record type A.
sales order is not displaying for record type A.
and for that c only revenue and and raw material cost is flowing.
thanks
kareem

Assembley Processing Sales Order date not pulling through as finished date

Similar Messages

Maybe you are looking for