Assembly order strategy 81 components exception message 40

Dear Team,
I am using planning strategy 81 for discrete manufacturing process.Planning is taking care for finished product and triggering planned order. But in component level requirement is not generating and showing exception message as 40. If i execute MD02, then working well. Let me know why requirements are not generating for components in MD04 screen. Is it required MRP run for components even in assembly order process.?
For components collective requirement 2 using.
I would greatly appreciate if you identify the issue
Regards
Abhilash

Hello Abhilash
The components are not planned automatically when using strategy 81. The planned order is generated and dependent requirements for the components are also generated, however, there is no MRP run, therefore, the dependent requirements are not covered.
As an alternative, I suggest you to check the requirement type/class customizing. There is an indicator called "automatic planning" which triggers the MRP for the sales order automatically in background.
This setting can be used as a workaroung in this case.
BR
Caetano

Similar Messages

MRP exception message 64 and planning strategy group 52

Hi Gurus,
I have done extensive search online in the forum to find the route cause why we are getting MRP exception message 64 for a specific material in one of our plants. This exception message does not occur for the same materials which is also produced in another plant.
I was just wondering whether the planning strategy group of 52 in MRP 3 view would have any effect on the frequent occurrence of exception message 64. I know that the 64 message occurs when the routing time is higher than the in house production time. If that's the case where to look for in routing to correct this, apart from this do we need to look at work centers and other details. I'm not a PP person but still was curious to know see if i could take a shot at it.
Also the MRP settings that we follow in the plant where this problem does not occur is NETCH, Create PR - 2, Schedule lines - 3, create MRP list - 1, Planning mode - 3, scheduling -2
in the plant where the 64 message occurs quite often is Netch, Create PR -2, Schedule lines - 3, create MRP list - 1, planning mode - 1, Schdeduliing - 1
I was thinking do MRP settings and planning strategy group would have any impact on why we are getting the 64 wexception message
Because of this 63 exception message, the downstream components are getting wrong signals.
Thanks
Ravi

Hello Ravi
Generallt, exception message "64 - Production finish after order finish" is triggered when the order start date is in the past and system automatically changes to forward scheduling to calculate the finish date.
Note 1913017 explains how the order basic date is calculated and adjusted in case of forward scheduling, however, you are using strategy 52 and this is a very special scenario, whever VP planned orders are generated.
The VP planned orders will always be adjusted to the requirements date even if the requirements date is in the past. This is a special feature in the planning segment, since these orders are only kind of 'virtual' planned orders. These orders only have to provide the demand requirements for the components in time.
Therefore, there is a relationship between strategy 52 (VP planned order) and the exception message observed.
BR
Caetano

Different Exception messages in MRP list & Stock Requirement List

Hello Experts,
When I run MRP and then look at the stock Requirement List & MRP list for the same material, I see different exception messages in these list.
I noticed that any of the exception messages in Exception group "7 - Exception during rescheduling" (ie, 10-reschedule in; 15-Reschedule Out; 20-cancel process; 30-plan process according to schedule) is not appearing in the stock requirement list even though they appear in the MRP list.
Does any configuration affect what message group can appear in Stock Requirement List & MRP list?
Please advice.
Regards
Tom

Hi Tom,
For exception message - 62, just do the below checks -
Some of the reasons as to why you may find this exception message is because the backward scheduling can drive the start date in the past so far that:
- there is no valid BOM as of that date
- one or more of the work centers are not valid on that date
- there is no valid factory calendar on that date
Check the scheduling formulas in your work centers that are set up, and/or to specify for the material master a fixed lot or a max lot size so that planned orders result with realistic lot sizes.
Also you can set up MRP to only run on basic dates for your overall run, and to follow up with an MRP run which generates capacity planning only within the planning horizon, such as NETPL. You would need to configure the planning horizon so that it specifies a time frame over which capacity planning is to be done.
Also check the note : 88505 - Planned order upload generates exception message 62
In short, do a thorough check of the parameters maintained to ensure there is no inconsistency in the master data.
Check & revert.
Regards,
Vivek

Planning Strategy 81 - Assembly order

Hello,
My requirement is as follows :-
On creation of Sales order Planned order get trigger.
Any changes in sales order should reflect in Planned order.
Any changes in dates of planned order must get reflect in Sales order.
For this I am using planning strategy 81ie Assembly order. If i do changes in sales order the planned order is changed.
But if i change planned order dates system gives message "Assembly order, changes are transferred to Sales Order"
but if i check the sales order there are no changes.
Any one please show some light on this.
Thanks in advance.
Regards
Abhijit

Hi Abhijit,
1. Kindly check the setting for hte requirement class in the ovzg.
2. in this check if hte no update is selected.
3. As per your requirement no update should be empty
Kindly check and confirm.
REg
dsk

Purchase order exception message

Does anyone know what table the exception messages generated via MD04 /MD06 are stored.
Thank you

Thank you , very helpful , would you happen to know which tables i would need to link this back to a purchase order or sales order.
Thank you

"Error while reading Exceptions" - Message No. /SCMB/ORDER 351

Hello,
An error message that we are getting as "Error while reading Exceptions" - Message No. /SCMB/ORDER 351 while entering a Work Order Number in the 'Work Order details' screen in the SNC Web UI. So, please let us know how to tackle this error in SNC.
Regards,
PCN

Hello Pavan,
This message can occure at multiple places. Most of these are status reading and checking in the /SCA/CL_SVORDER class. The following methods can throw this message:
CHECK_ITEM_EXCEPTION_STATUS
You can set a BP at line 20 and debug the STATUS_CHECK function.
GET_ITEM_EXCEPTION_STATUS
You can set a BP at line 29 and debug the STATUS_READ function.
READ_ITEM_EXCEPTION_STATUS
You can set a BP at line 31 and debug the /scmb/cl_odm=>get3_by_id method.
I hope this will help you.
Regards,
Richard

Exception message for PrdOrd and Planned order

Hi Gurus,
It possible based on prdord and planned ord we need to get the Exception message information. It's there any standard transaction code or any sqvi report?
Note:
Exception Message:
10 - Reschedule in
20 - cancel
05 - Opening date in the past
26 - Excess in individual segment
Please find this information in MD04 (single order). i am looking for same time multple orders with exception message report.
Thanks and regards,
Deethya.B

Hi
You can use MD06 with refrence to you plant and MRP Controllers. Also you can define your own traffic lights so that based on these you get your exception messages.
Hope this helps,
Regards,
Ravi

Purchase order exception messages

hi all,
i want to know the table and field name of purcahse orders linked with PO exception messages in MD04
Transaction
thanks in advance..
sathish..

HI,
check the table PRON with matnr and werks will do i hope..

Exception message to identify orders pegged to excess

Hello,
Is there a way to identify orders (like purchase orders, purchase requisitions) that are pegged to excess, with an exception message?
Thanks,
Sash

Mangesh,
In MD07, give the plant, optional mrp controller, exception groups (check box 1-8)
You can not get only the MRP exception message that falls under group 7 as a
total.
As far as i know I dont think there's some direct T code for getting only the MRP
exception messages
Thanks,
Sankaran

Suppression of Re-Order Point Safety Stock Exception Messages

Hi There!
Hope someone can help!?
I need to be able to suppress MRP Exception Message 96 - Qty Under Safety Stock but for PD Only.
Is this possible?
Cheers,
Karl

Hi There!
We have lots of Raw materials controlled by MRP Type PD, which have Safety Stock Value.
However, quite often although the actual stock is lower than the Safety stock Planners have lots of messages (96 - Below safety stocks). However, although Purchase order reciepts may be late, there isn't actually a problem. As When the PO Reciepts actually happen there is enough stock to satisfy actual demand.
We would like to put many of these Raw materials on Re-Order Point Planning, and manage. But we would like to ignore the (96 - Below Safety Stock) for Normal Items.
Hence, Planners have exception messages for REAL Priorities.
Hope this explains all!
Cheers,
Karl

Assemble components -xml message problem

Hi,
In our 5.2.3.1 we have following problem.
We are assembling components with assemby message:
Sometimes we have not all the identifiers received to the system.
These cases the assembly message returns an error but it assembles part of the components in the message. That is not wanted way of working. After error we should be able to receive the missing component to the system and send the assembly message again. But now part of the components have already been assembled and the assembly message will fail:
No quantity left to assemble for the specified location (Message 13971)
Is there any way of preventing partial assembly of components in this case?
Br,
Pete
Edited by: Petri Kauppi on Jun 7, 2010 1:32 PM
Edited by: Petri Kauppi on Jun 7, 2010 1:35 PM (xml- messages with are not show correctly, removed example messages)

Problem was so long ago...
If I remember correct there were added new tags to XML -message. Something like ALL_OR_NOTHING.
TRUE/FALSE
With this tag we can prevent partial assembly by setting it TRUE.

Message V1748.You cannot select assembly order 1440363 for deletion.

Dear Friends,
I am getting the above error while rejecting a line item for sales order.
Diagnosis says:
Due to the current situation of the document, the system has attempted to mark the procurement element 1440363 with a deletion flag.
This could, however, not be carried out, as the procurement element was in a state that does not allow the deletion flag to be set.
I am unable to handle it.
Please guide me in this regard.
Regards,
Srinivas

Let me ask you this: Is the assembly order 16600192 your VA02 order number? If not, your sales order item might have created an assembly order (with this number). Depending on its status, you may not be able to delete the assembly order and therefore the sales order item deletion is not possible.
Verify the assembly order status.
Good luck!

Error-M2O-Settlement rule for assembly order for item...could not be genera

Hi,
When I am creating Sales Order (VA01) for M2O, I am able to do the costing and copy the EK02 condition type. I have verified the the incompletion log, it indicates that document is complete.
But while saving the sales order, the below error message is displaed:
Settlement rule for assembly order for item 000010 could not be generated. Should the order still be saved?
                Yes/No
1. If No is choosen the following error message is displayed
       Error when processing Production order
      Error when processing Production order
      Message no. V1380
      Diagnosis
        A technical error has occurred. On calling up the assembly interface, exception 5 was triggered. The exceptions have the following meanings:
1 = External block, 2 = General error, 3 = Insufficient data for the interface, 4 = Order was not found, 5 = Update has been rejected, 6 = Final document number for Production order is not issued. Procedure: Inform your system administrator.
2. If Yes is choosen, it is creating Production Order without settlement rule. Able to perform GI & Gr. If I try to enter settelement rule (Settlement receiver SDI - Sales document item) in production order (CO02), the belwo error message is displayed
"Distribution rule for Sales document item can only be created automatically Message no. KD063"
We are using the requierement class with below details:
Reqmts class: ZSO- for M2O
AAC = E, Valuation = A, Settlement profile =SD1, RAKey = 000004, Assembly type = 3.
Settlement profile contain:
Allocation structure, PA structure, Default object type = SDI. Valid receivers: Optional -Sales Order / Prof. seg.
If I make the Valuation field as blank in Reqmts class, there is no error while creating Sales order. And also Settelemnt rule with sales document item as receiver is successfully creating for the production order. Since the Valuation is blank in requirement class, it is Non valuated Sales order stock. All GIs & GR are non valuated
The business requirement is it should be valuated sales order stock and the production varinaces has to be settled to Sales order. Then Sales order has to be settled to COPA.
Need your valuable inputs to meet this requirement.
Let me know if you need any further details.
Thanks in advance.
Regards,
ADI

Dear SAP PP Consultant ,
What is the strategy group you are maintained in the material master ?

MRP Exception Message 26: Excess stock in individual segment

We would like to modify the logic relating to MRP Exception Message 26: Excess stock in individual segment to allow for a material-specific tolerance threshold, within which no exception would be generated. An alternate approach might be to deactivate message 26 and create a new custom exception that accomplishes the same thing.
The reason is that we fabricate and procure a large number of materials in a Make-To-Order environment, with some planned scrap at multiple levels of sub-assembly. The result is that we often have small residual quantities of components & sub-assemblies in sales order stock when the project is complete. Some of these may be useful on future projects so we want them to remain in stock, but we donu2019t want them to continually generate exception messages that distract our planners from the exceptions that truly need attention.
I have tried setting up a storage location that is excluded from MRP, and this works only if the material is in General Stock, but not if it is in Sales Order Stock.
If anyone knows of a way to either set up an allowed tolerance, or exclude a sales order segment from MRP, please let me know.

DB49,
I have previously suggested just what you have indicated (ie. to move the parts back to unrestricted geneeral use stock). My company's objection is that the materials were either produced or procured for that original sales order and that the costs for these materials are in that sales order as well. Using a 411E transfer posting will not only move the stock, but also the cost (as if we are buying it back from the sales order). Since there is no guarantee that we will be able to sell it again, our accounting department will not allow us to do this.
So the bottom line is:
We do want to retain visibility to these stocks.
We don't want the cost for these stocks back on our books
If the opportunity presents itself, we want to move them to any future sales order for the same material.
We don't want the hundreds of exception messages for "excess stock in individual segment"
However we do want to see this message for actively planning sales orders that may have too much stock
There may be no way to get this, but that is the goal.

Exception Message 20

Dear Friends
    For one Raw material there is two reservations are there. For these two reservations ( qty each: 1) 3 purchase orders availble.One purchase order have exceptin message 10, second have 15, third have 20 ( means cancel the process).
This material is very costly item. For this raw material the dependent requirement is Finished prouduct which have planning strategy 20. Now my client is asking the details of exception message 20 purchase order ? why system cancelled purchase order ( this purchase order has alrea

Hi,
Can you elaborate on the exception message 20 in MD04, as I also see this in my list for my PO.
What are the factors that can cause this message ?
This is how my MD04 looks like. Appreciate your help. thanks.
Date              MRP Element                                     Exc M.       RedQty.    AvailQty.   Sloc
04.12.2008     Stock                                                            0.00      0.00
21.03.2008     OrdRes 000030082146               1.00-     1.00-     3001
24.12.2008     PchOrd 4510668989/00010                  20     1.00      0.00      3001
05.02.2009     PlOrd.      0000671875/SDeb 21.03.2008 30     1.00      1.00
Edited by: Mary Ann Knaik on Dec 4, 2008 11:57 AM

Assembly order strategy 81 components exception message 40

Similar Messages

Maybe you are looking for