Assembly order update issue

Hi,
In assembly order scenario, changes in planned order (order quantity or order execute date) is not updating the corresponding Sale order at times. Not able to simulate the scenario even. Any hellp.
Thanks in advance.

Dear ,
In SAP R/3 , when ever you are changing any date or qty for Planned Order or Production Ordre refernce to Sales demand ,will not change the Qty /date in the demand element( sales order /pir /schedule line aggrement ) .Where as other way , it does change for the un-firmed procurement proposal ( un-firmed planned order ) .i.e if you change sales order qty or schedule delivery date and re-run MRP , it will change the dates and qty in UN-FIRMED planned order .
When you are running MRP -Single Item Multiplevel -MD02 or Make To Order (MD50) , system generates Planned Order for FG and PR for shoratge qty of dependent qty .
Now , if you change the qty or date in Planned of FG (MD04-Enter material -Selct Planned Order -Select Change Mode ) and Hit the Schedule Planned Order and SAVE , it will be firmed Order and will not be treated any more for MRP relevent changes .
Just test a demo fot he same in Sand Box .Create a sale order in VA01 , relase the sales order after availablity check and note sales order schedule delivery date .Now , run MRP on this through MD50 or MD02 , generate planned order .Check the result in MD04, select the planned Order , change the qty , change the Planned order Opening /start /finish date and hit scheule planned order button , save .Come back to MD04 screen and re-fesrh .Now re-run the MRP-MD02, it will not change the Sales Order delivery date .
Rather , if you goto MD04-Select the Sales Order and selet the line itmem and hit Availability check key , then it will propose you the availability date as per the chnages and you can continue with the same .It depends on the Repleishment Lead time assinged to Material master MRP3 view
Hope it is clear .
Regards
JH
Edited by: Jiaul Haque on Jul 24, 2010 2:51 PM

Similar Messages

Error-M2O-Settlement rule for assembly order for item...could not be genera

Hi,
When I am creating Sales Order (VA01) for M2O, I am able to do the costing and copy the EK02 condition type. I have verified the the incompletion log, it indicates that document is complete.
But while saving the sales order, the below error message is displaed:
Settlement rule for assembly order for item 000010 could not be generated. Should the order still be saved?
                Yes/No
1. If No is choosen the following error message is displayed
       Error when processing Production order
      Error when processing Production order
      Message no. V1380
      Diagnosis
        A technical error has occurred. On calling up the assembly interface, exception 5 was triggered. The exceptions have the following meanings:
1 = External block, 2 = General error, 3 = Insufficient data for the interface, 4 = Order was not found, 5 = Update has been rejected, 6 = Final document number for Production order is not issued. Procedure: Inform your system administrator.
2. If Yes is choosen, it is creating Production Order without settlement rule. Able to perform GI & Gr. If I try to enter settelement rule (Settlement receiver SDI - Sales document item) in production order (CO02), the belwo error message is displayed
"Distribution rule for Sales document item can only be created automatically Message no. KD063"
We are using the requierement class with below details:
Reqmts class: ZSO- for M2O
AAC = E, Valuation = A, Settlement profile =SD1, RAKey = 000004, Assembly type = 3.
Settlement profile contain:
Allocation structure, PA structure, Default object type = SDI. Valid receivers: Optional -Sales Order / Prof. seg.
If I make the Valuation field as blank in Reqmts class, there is no error while creating Sales order. And also Settelemnt rule with sales document item as receiver is successfully creating for the production order. Since the Valuation is blank in requirement class, it is Non valuated Sales order stock. All GIs & GR are non valuated
The business requirement is it should be valuated sales order stock and the production varinaces has to be settled to Sales order. Then Sales order has to be settled to COPA.
Need your valuable inputs to meet this requirement.
Let me know if you need any further details.
Thanks in advance.
Regards,
ADI

Dear SAP PP Consultant ,
What is the strategy group you are maintained in the material master ?

You Cannot select assembly order for deletion error with BAPI_SALESORDER_CAHNGE after EHP6 upgrade

Hi All,
We are using Z transaction to update Wbs element data to sales order line item through BAPI_SALESORDER_CHANGE. After EHP6 upgrade while updating Wbs element data to old sales orders(Created before EHP6 upgrade) we are getting You cannot select assembly order < order number> for deletion (V1 748) error in BAPI return table, For multiple Sales order run.
But if we run the same order individually it is getting processed successfully. W e are passing the same values in individual and multiple case.
We debugged the BAPI and found one more error related to Authorization, But BAPI return table is giving different error (V1 748)message. Please help us in finding the issue.

Hi Sujay..
Please check.
http://help.sap.com/saphelp_47x200/helpdata/en/b7/58c4c87e0811d2b66a0000e82d8bd1/frameset.htm

Error While Updating Issue For Production

Hi,
        When i am trying to update an UDF in issue for production i am getting the following error message.
Item is Not a Component to the Referenced work order[Goods Issue - Object Type] Message 3560 -5

Dear Manikandan K,
Regarding the message we can tell you that the error message
"Item is not a component of the referenced Work Order" usually appears
because there is a case sensitive problem between the item code given
in the BOM and the item code given in the item master data.
Please check if the item codes of the BOM are exactly the same as the
codes given in the item master data. There should not be any differences
between spelling of the codes (for example item code in the item master
data is with capital letters X00014447 while the item code in the BOM
is with normal letters x00014447).
In case you find item with this issue please correct its item code
in the BOM manually so it will be exactly identical with the code given
in the item master data.
Regards,
Marcella Rivi
SAP Business One Forums Team

Posting rule for assembly order for item 000000 could not be generated

Hi all,
While creating production order from sales order system giving an error message 'Posting rule for assembly order for item 000000 could not be generated.'
Kindly help to resolve the issue.
SmanS

Dear SAP PP Consultant ,
What is the strategy group you are maintained in the material master ?

Changes in Assembly order

Hi Gurus,
We are using assembly order process.
As you know whenever I create a sales order, production order is also created at the same time.
But now our problem is whenever I make changes in the sales order, it is taking to production order screen automatically. I want the corresponding changes in production order should happen in back ground when I change sales order. Is it possible. How?
All answers will be rewarded accordingly.
Regards,
Jejesh

Hi,
The sales order changes will not be automatically updated in your production order. For this you need to do some developments on your own. SAP standard will not update this automatically.
Since your sales order requirement type is having the requirement class automatic planning, you are getting the production order once you created the sales order.
Regards,
V. Suresh

Auto create final assembly orders

when autocreate final assembly order is run for configured item its creating work order for parent assembly only.
its not creating work order for sub assemblies involved in that parent assembly.
even after setting in BOM parameters,
create lower level supply: auto create configuration items and ATO items.
then, how to solve this issue.
any setups missing?

Hi,
the supply for lower level assemblies is done only if the lower level assemblies are ATO. I am not sure of which value is set for create lower level supply parameter. Did you set for Autocreated items and ATO Items?
regards

Error:(in tcodeVA02)"You cannot select assembly order 16600192 for deletion

when i am trying to delete one line item from sales order using VA02 tcode its throwing error "You cannot select assembly order 16600192 for deletion".
could you tell me please what might be the reason and how to resolve this issue.
waiting for your response.
thanks,
aritra
Message was edited by: Aritra Samanta
Message was edited by: Aritra Samanta

Let me ask you this: Is the assembly order 16600192 your VA02 order number? If not, your sales order item might have created an assembly order (with this number). Depending on its status, you may not be able to delete the assembly order and therefore the sales order item deletion is not possible.
Verify the assembly order status.
Good luck!

Assembly order strategy 81 components exception message 40

Dear Team,
I am using planning strategy 81 for discrete manufacturing process.Planning is taking care for finished product and triggering planned order. But in component level requirement is not generating and showing exception message as 40. If i execute MD02, then working well. Let me know why requirements are not generating for components in MD04 screen. Is it required MRP run for components even in assembly order process.?
For components collective requirement 2 using.
I would greatly appreciate if you identify the issue
Regards
Abhilash

Hello Abhilash
The components are not planned automatically when using strategy 81. The planned order is generated and dependent requirements for the components are also generated, however, there is no MRP run, therefore, the dependent requirements are not covered.
As an alternative, I suggest you to check the requirement type/class customizing. There is an indicator called "automatic planning" which triggers the MRP for the sales order automatically in background.
This setting can be used as a workaroung in this case.
BR
Caetano

AW: [Acrobat Installation & Update Issues] AW: [Acrobat Installation & Update Issues] Update von Acrobat 8.0 auf 8.3

hello
I say again that I have acquired the Acrobat 8.0 version honestly. I ordered this version even if a handler is Germany. This handler was registered on the website at Adobe as a handler. If you do not believe me, I'm looking for stuff from my archive. But this time I would like to have then paid by you. Again, it is known that the version 8 Without the update 8.3, constantly has errors. I used to simply confirmed the update button. Today there is no longer this site. You are obliged to provide me with the update. Or give me a free replacement to the next higher version. Please give me a link to a zip file that contains a setup file.
Best Regards
Werner
Hallo
Ich sage nochmals, dass ich die Acrobat 8.0 Version ehrlich erworben habe. Ich habe diese Version auch bei einem Handler ist Deutschland bestellt. Dieser Handler war auch auf der Webseite bei Adobe als Handler registriert. Wenn Sie mir nicht glauben, werde ich die Sachen aus meinem Archiv suchen. Diese Zeit möchte ich aber dann von Ihnen bezahlt haben. Nochmals, es ist bekannt, das die Version 8. Ohne das Update 8.3, ständig Fehler hat. Ich habe früher einfach das Update Button bestätigt. Heute gibt es diese Seite nicht mehr. Sie sind dazu verpflichtet, mir das Update zu liefern. Oder liefern Sie mir kostenlosen Ersatz auf die nächste Höhere Version. Bitte, Sie mir einen Link mit einer Zip-Datei, die eine Setup Datei beinhaltet.
Best Regards
Werner
Mobil: +41 (0) 79 559 83 21
Skype:<skype:werner6331?call> Werner Göbel<skype:werner6331?call> (werner6331)
Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen. Der Inhalt dieser E-Mail ist ausschließlich für den bezeichneten Adressaten bestimmt. Bitte beachten Sie in diesem Fall, dass jede Form der Kenntnisnahme, Veröffentlichung, Vervielfältigung oder Weitergabe des Inhalts dieser E-Mail UNZULÄSSIG ist. Wenn Sie nicht der richtige Adressat bzw. sein Vertreter sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Vielen Dank. Der Versender übernimmt keine Haftung für die Richtigkeit oder Vollständigkeit der Meldung. Eventuell entstandene Schäden die aus den Inhalten dieser Meldung resultieren werden vom Versender nicht übernommen.
This e-mail may contain confidential and/or privileged information. Access to this e-mail by anyone else is unauthorized. If you are not the intended recipient (or have received this e-mail in error), any form of disclosure, reproduction, distribution or any action taken or refrained from in reliance on it, is strictly PROHIBITED and may be unlawful. If you have received this transmission in error, please inform the sender immediately by e-mail at the above address and destroy this e-mail. Thank you.
The sender does not accept liability for any errors or omissions in the contents of this message, which may arise as a result of e-mail transmission.
Von: Rave
Gesendet: Donnerstag, 28. August 2014 22:50
An: Werner Göbel
Betreff: AW: Update von Acrobat 8.0 auf 8.3
AW: Update von Acrobat 8.0 auf 8.3
created by Rave<https://forums.adobe.com/people/Rave> in Acrobat Installation & Update Issues - View the full discussion<https://forums.adobe.com/message/6682731#6682731>
< This thread has been answered a duplicate of Update von Acrobat 8.0 auf 8.3<https://forums.adobe.com/thread/1558776> >
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6682731#6682731
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Acrobat Installation & Update Issues by email<mailto:discussions-community-acrobat-installation_and_update_installation@adobe-v7.hosted.jivesoft ware.com> or at Adobe Community<https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=47 14>
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Warum Sie antworten nicht auf meine Frage??
Wie muss ich Instaliren??
Beste Grüße
Werner Göbel
Mobil: +41 (0) 79 559 83 21
Skype:<skype:werner6331?call> Werner Göbel<skype:werner6331?call> (werner6331)
IGH Holding AG
Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen. Der Inhalt dieser E-Mail ist ausschließlich für den bezeichneten Adressaten bestimmt. Bitte beachten Sie in diesem Fall, dass jede Form der Kenntnisnahme, Veröffentlichung, Vervielfältigung oder Weitergabe des Inhalts dieser E-Mail UNZULÄSSIG ist. Wenn Sie nicht der richtige Adressat bzw. sein Vertreter sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Vielen Dank. Der Versender übernimmt keine Haftung für die Richtigkeit oder Vollständigkeit der Meldung. Eventuell entstandene Schäden die aus den Inhalten dieser Meldung resultieren werden vom Versender nicht übernommen.
This e-mail may contain confidential and/or privileged information. Access to this e-mail by anyone else is unauthorized. If you are not the intended recipient (or have received this e-mail in error), any form of disclosure, reproduction, distribution or any action taken or refrained from in reliance on it, is strictly PROHIBITED and may be unlawful. If you have received this transmission in error, please inform the sender immediately by e-mail at the above address and destroy this e-mail. Thank you.
The sender does not accept liability for any errors or omissions in the contents of this message, which may arise as a result of e-mail transmission.
Von: Bill@VT
Gesendet: Sonntag, 31. August 2014 22:09
An: Werner Göbel
Betreff: AW: AW: Update von Acrobat 8.0 auf 8.3
AW: AW: Update von Acrobat 8.0 auf 8.3
created by Bill@VT<https://forums.adobe.com/people/Bill%40VT> in Acrobat Installation & Update Issues - View the full discussion<https://forums.adobe.com/message/6689459#6689459>

Planning Strategy 81 - Assembly order

Hello,
My requirement is as follows :-
On creation of Sales order Planned order get trigger.
Any changes in sales order should reflect in Planned order.
Any changes in dates of planned order must get reflect in Sales order.
For this I am using planning strategy 81ie Assembly order. If i do changes in sales order the planned order is changed.
But if i change planned order dates system gives message "Assembly order, changes are transferred to Sales Order"
but if i check the sales order there are no changes.
Any one please show some light on this.
Thanks in advance.
Regards
Abhijit

Hi Abhijit,
1. Kindly check the setting for hte requirement class in the ovzg.
2. in this check if hte no update is selected.
3. As per your requirement no update should be empty
Kindly check and confirm.
REg
dsk

Assembly Order

What is assembly order?
Assembly order is created / released,what kind of changes in sales order will update the assembly order? for ex: quantity change

dear,
please go through the link first..to get some idea ofassembly order
http://help.sap.com/saphelp_47x200/helpdata/en/cb/7f9b7043b711d189410000e829fbbd/frameset.htm
In nutshell -
Assembly orders are created when you create a sale order directly, not during MRP run. Now you can make the system to create production order or planned order as per your requirement.
About the qty - I have not understood...whan you create a sale order for let us say 10 qty, system will create order for 10 qty...
please come back if required.

AutoCreate Final Assembly Orders - Pre-requisite setup details needed

Hi ,
I am a technical person and bit new to WIP module but to my understanding when AutoCreate Final Assembly Orders program runs, it creates a WO and also Requisition.
I was doing few test and found that for some sales order it is creating WO but not requisition i.e. I don't see Requisition Import being called by AutoCreate Final Assembly Orders program.
Can you please provide me what is the setup or pre-requisite for the AutoCreate Final Assembly Orders program to generate Requisition?
Thanks,
SM

[email protected] wrote:
[SOLVED]
There seems to be an issue with partitioning a swap partition as "swap" (wtf?) when using dm-crypt/Swap encryption. This is odd to me since reportedly systemd processes crypttab before fstab, but maybe it looks at the drives first before looking at either table file and then assumes all swaps are not encrypted and just mounts the standard unencrypted swap essentially reserving the partition so that dm-crypt can't access it - would be nice if systemd didn't do that, maybe not logically possible? Or, time for a new partition type, encrypted-swap? Anyway, I digress and notice that now my encrypted swap works as expected but still shows a partition type of "unknown"which feels like a hack.
So the solution:
sudo cryptsetup luksDump /dev/sdaX
Then follow the steps from the "dm-crypt/Swap encryption" wiki. Aside from long term solutions maybe this could be added to that wiki article?
thanks!
b1k
Had more time to play with this. The "cryptsetup" command isn't necissary. While this effectively "fixed" my swap partition that was partitioned as a "swap" partition - all that one needs to do is partition their swap as anything BUT swap. So maybe a quick blurb mentioning that in the "dm-crypt/Swap encryption" wiki article will save another noob a couple hours. It is sorta mentioned in the "Swap (Activation by systemd)" wiki article but it's hard to understand what the author was trying to convey (after re-reading I'm still not sure what problem the author is solving exactly).

Assembly order scheduling

Hi Gurus,
As you all know in assembly order processing we will get a production order created automatically when a sales order is created with out MRP Run.
My requirement is the production order should be scheduling using material master values(Total replenishment Lead time or inhouse production time+GR processing time). I mean basic date scheduling.
But now the scheduling is happening with Lead time scheduling which will consider the standard values in the routing for scheduled dates calculation. But we want Basic date scheduling.
I know we can select this option in MRP parameters(MD02 initial screen) but in our scenario we will not run MRP.
All responses will be awarded accordingly.
Thanks in advance,
Jejesh

Dear,
If we do the lead time scheduling system always take time from routing the consider your schedule margin key to define basic date. But we we do the basic date scheduling the system will consider the timing from Material master but will not generate capacity requirement
By scheduling routings, you can better control the lead times and your problem also.
scheduling in routing (CA02 ) as :
Call up the operation overview for the routing.
Choose Extras-- Scheduling -- Schedule.
You reach the Scheduling dialog box.
Maintain the data on the dialog box. The system proposes Backward scheduling for the scheduling type.
Choose Continue.
You reach the Enter overview variant dialog box.
Enter the overview variant you want to use to display the scheduling results. Choose Continue.
The routing is scheduled. You reach the Schedule Overview screen containing the scheduling data.
After the scheduling run has been carried out, click on scheduling Result-- update material master
You use this function to update material master. Go to the CA96 and update material master.
After that run MRP (MD02) with planning mode-3 deleted and recreated and checks your result.
Also OPU5 for your plant, order type & scheduler. Adjust dates - select Adjust basic dates, dep req to opn dates.
Hope it will sove your problem
Regards,
R.Brahmankar

WG: [Acrobat Installation & Update Issues] Update von Acrobat 8.0 auf 8.3

Hallo
Ich bin ein korrekter Mensch.
Sie sehen in der Anlage, dieser Mail, das ich das Produkt ehrlich gekauft habe.
Ich verwende nur original Software.
Die Acrobat Version 8.0, war immer sehr gut für mich.
Diese Version reichte für mich vollkommen aus.
Ich hatte einen Computerabsturz und musste Acrobat auch neu installieren.
Die Acrobat Version 8.0, ohne Update, stürzt immer ab.
Das können Sie auch im Internet lesen.
Jeder weiß das, dass Acrobat Version 8.0, ohne Update abstürzt.
Es gibt aber dies Update nicht mehr zum Download.
Ich erwarte jetzt von Adobe, kostenlose Abhilfe.
Ich möchte jetzt eine kostenlose Fehlerbeseitigung.
Oder geben Sie mir ein kostenloses Update auf die neue Version.
Ich habe ein Anrecht darauf, dass Sie mir kostenlosen Ersatz liefern.
Beste Grüße
Werner Göbel
Mobil: +41 (0) 79 559 83 21
Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen. Der Inhalt dieser E-Mail ist ausschließlich für den bezeichneten Adressaten bestimmt. Bitte beachten Sie in diesem Fall, dass jede Form der Kenntnisnahme, Veröffentlichung, Vervielfältigung oder Weitergabe des Inhalts dieser E-Mail UNZULÄSSIG ist. Wenn Sie nicht der richtige Adressat bzw. sein Vertreter sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Vielen Dank. Der Versender übernimmt keine Haftung für die Richtigkeit oder Vollständigkeit der Meldung. Eventuell entstandene Schäden die aus den Inhalten dieser Meldung resultieren werden vom Versender nicht übernommen.
This e-mail may contain confidential and/or privileged information. Access to this e-mail by anyone else is unauthorized. If you are not the intended recipient (or have received this e-mail in error), any form of disclosure, reproduction, distribution or any action taken or refrained from in reliance on it, is strictly PROHIBITED and may be unlawful. If you have received this transmission in error, please inform the sender immediately by e-mail at the above address and destroy this e-mail. Thank you.
The sender does not accept liability for any errors or omissions in the contents of this message, which may arise as a result of e-mail transmission.
Von: Bill@VT
Gesendet: Mittwoch, 27. August 2014 16:16
An: Werner Göbel
Betreff: Update von Acrobat 8.0 auf 8.3
Update von Acrobat 8.0 auf 8.3
created by Bill@VT<https://forums.adobe.com/people/Bill%40VT> in Acrobat Installation & Update Issues - View the full discussion<https://forums.adobe.com/message/6678331#6678331>
How did you purchase? AA8 has not been available for almost 8 yrs or so. The only current version available from Adobe is 11 and you can not upgrade from 7 to 11, but have to buy the full product.
Updates also require the use of the S/N of the qualifying product (AA7 in your case) to be able to use the newer product. So at this point, it is unclear what you actually have.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6678331#6678331
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Acrobat Installation & Update Issues by email<mailto:discussions-community-acrobat-installation_and_update_installation@adobe-v7.hosted.jivesoft ware.com> or at Adobe Community<https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=47 14>
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

I was not trying to imply that you improperly purchased the product, but that the source may have been a rip off and that could be the problem. From what I can see, it appears that you were able to install Acrobat, but can not do the updates. In that case, try the updates from the ftp site. I will have to come back with the address that I do not have on this machine. The html updates are no longer available for some reason, but the ftp site contains all the updates. You do have to install the updates in order in general, though you only have to reboot after the last update. I will change computers and find the ftp link to provide you.
The ftp site is: ftp://ftp.adobe.com/pub/adobe/acrobat/.

Assembly order update issue

Similar Messages

Maybe you are looking for