Assembly Processing Error

Hi,
When I try to create a sales order for assembly processing, I get
these two errors one after the other and the Sales order creation
terminates. Does Anyone have an idea?
"Error when process Production order"
"Order type PS04 not found(check entry)"
do you know where it's looking for a production order? I don't know
what in the material master or the sales order is triggering this.
I have assigned a requirements type KMPN, requirements class 212,
strategy group 83 in the material master. Sales document type is OR
(Standard Order). I have created a standard network and WBS and
assigned them to the material master in CN08. Is there any other
setting(s) I am missing?
Regards,
Venkat.

Strategy group should be 85. Check this:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/95/1613ab837b11d2b6700000e82d8bd1/content.htm
Regards

Similar Messages

  • Error coming while creating sales order Thru' Assembly processing.u00A0

    Hi,
    I am working on assembly processing. when i am creating sales order if order qty when i am giving more then 999 means if i given 1000 kg it giving an error like the exection factor in the network is reduced to 1000 to 1 kg and confimed as 1 kg only and system is giving msg *Change not accepted (execution factor in network too large)* where i have tomodify this .
    In above context i would like to brief you that i can't extend quantity more then 999(Three alfabet).
    All suggestions will be apreciated with good points.
    Regards,
    Vishal Kr. Sharma

    Hi vishal
    Check in MMR the  following settings  :
    1) Base unit of measure
    2) sales unit
    3) Strategy group maintained  in MMR ->MRP 3 view
    4) Availability check(sales/general plant view in MMR ) and MRP type (MRP1 view in MMR)  has been maintained or not.
    5) Check the fields maintained in the MRP 3 view.
    Regards
    Srinath

  • Error in Assembly processing

    In assembly processing, while i creating a sales order the following error is occur.
    *Error when processing network
    Message no:V1380
    Diagnosis
    A technical error has occured.On calling up the assembly interface exception 2 was triggered.The exceptions have the following meanings,
    1 = External Block
    2 = General Error
    3 = Insufficient data for the interface
    4 = Order wasnot found
    5 = Update has been rejected
    6 = Final document number for network is not issued
    Procedure:
    Inform your system administrator
    Pleas anybody give the solution.
    Thanks & Regards
    Vijay

    Hi Veera,
    did u follow these pre-requisites:
    1. Std. Network (which is assigned to Std. WBS)
    2. Network parameters from sales order (CN08)
    3. In Material Master maintain SD views and MRP Views
    bye
    raj

  • Assembly failed error message

    Hello Experts,
    We are getting "Assemble failed" error message when we tried to assemble components. I have attached a CMS log file. You help and feedback is greatly appreciated.
    David
    Info:Starting Step Repository-export at 2008-10-08 05:34:02.0206 -4:00
    Info:Component:alleghenyenergy/AE_IMPORTED_OBJECTS
    Info:Version  :JD1_XD1IR01_C.20081008093400
    Info:1. PR is of type TCSSoftwareComponent
    Info:the workspace will be read from XI
    Info:OK   : workspacedata added.
    Info:Component:ivara.com/IVARA_EXP_ENTERPRISE
    Info:Version  :JD1_XD1IR01_C.20081008093401
    Info:2. PR is of type TCSSoftwareComponent
    Info:the workspace will be read from XI
    Fatal Exception:com.sap.cms.tcs.interfaces.exceptions.TCSCommunicationException: communication error: Exception received:
    ClientServerException exception:Software component version 58a66500336b11dd8387f3c70a53b4e5 has not yet been imported into the system and therefore cannot yet be assembled using CMS. You must execute a CMS- or file-based import of the software component version into the consolidation system first.
    com.sap.aii.utilxi.misc.api.ResourceException: Software component version 58a66500336b11dd8387f3c70a53b4e5 has not yet been imported into the system and therefore cannot yet be assembled using CMS. You must execute a CMS- or file-based import of the software component version into the consolidation system first.
         at com.sap.aii.ibrep.server.transport.impl.service.InternalRepTransportServiceImpl.checkSwcvExistence(InternalRepTransportServiceImpl.java:316)
         at com.sap.aii.ibrep.server.transport.impl.service.InternalRepTransportServiceImpl.createSupportPackage(InternalRepTransportServiceImpl.java:283)
         at com.sap.aii.ib.server.transport.impl.service.TransportServiceImpl.createSupportPackage(TransportServiceImpl.java:362)
         at com.sap.aii.ib.server.transport.impl.hmi.CmsHmiMethods.process(CmsHmiMethods.java:206)
         at com.sap.aii.utilxi.hmis.server.HmisServiceImpl.invokeMethod(HmisServiceImpl.java:169)
         at com.sap.aii.utilxi.hmis.server.HmisServer.process(HmisServer.java:178)
         at com.sap.aii.utilxi.hmis.sbeans.HmisBeanImpl.process(HmisBeanImpl.java:86)
         at com.sap.aii.utilxi.hmis.sbeans.HmisLocalLocalObjectImpl10.process(HmisLocalLocalObjectImpl10.java:144)
         at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:290)
         at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:211)
         at com.sap.aii.utilxi.hmis.web.workers.HmisInternalClient.doWork(HmisInternalClient.java:70)
         at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doWork(HmisServletImpl.java:496)
         at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doPost(HmisServletImpl.java:634)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    :communication error: Exception received:
    ClientServerException exception:Software component version 58a66500336b11dd8387f3c70a53b4e5 has not yet been imported into the system and therefore cannot yet be assembled using CMS. You must execute a CMS- or file-based import of the software component version into the consolidation system first.
    com.sap.aii.utilxi.misc.api.ResourceException: Software component version 58a66500336b11dd8387f3c70a53b4e5 has not yet been imported into the system and therefore cannot yet be assembled using CMS. You must execute a CMS- or file-based import of the software component version into the consolidation system first.
         at com.sap.aii.ibrep.server.transport.impl.service.InternalRepTransportServiceImpl.checkSwcvExistence(InternalRepTransportServiceImpl.java:316)
         at com.sap.aii.ibrep.server.transport.impl.service.InternalRepTransportServiceImpl.createSupportPackage(InternalRepTransportServiceImpl.java:283)
         at com.sap.aii.ib.server.transport.impl.service.TransportServiceImpl.createSupportPackage(TransportServiceImpl.java:362)
         at com.sap.aii.ib.server.transport.impl.hmi.CmsHmiMethods.process(CmsHmiMethods.java:206)
         at com.sap.aii.utilxi.hmis.server.HmisServiceImpl.invokeMethod(HmisServiceImpl.java:169)
         at com.sap.aii.utilxi.hmis.server.HmisServer.process(HmisServer.java:178)
         at com.sap.aii.utilxi.hmis.sbeans.HmisBeanImpl.process(HmisBeanImpl.java:86)
         at com.sap.aii.utilxi.hmis.sbeans.HmisLocalLocalObjectImpl10.process(HmisLocalLocalObjectImpl10.java:144)
         at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:290)
         at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:211)
         at com.sap.aii.utilxi.hmis.web.workers.HmisInternalClient.doWork(HmisInternalClient.java:70)
         at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doWork(HmisServletImpl.java:496)
         at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doPost(HmisServletImpl.java:634)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    com.sap.cms.tcs.interfaces.exceptions.TCSCommunicationException: communication error: Exception received:
    ClientServerException exception:Software component version 58a66500336b11dd8387f3c70a53b4e5 has not yet been imported into the system and therefore cannot yet be assembled using CMS. You must execute a CMS- or file-based import of the software component version into the consolidation system first.
    com.sap.aii.utilxi.misc.api.ResourceException: Software component version 58a66500336b11dd8387f3c70a53b4e5 has not yet been imported into the system and therefore cannot yet be assembled using CMS. You must execute a CMS- or file-based import of the software component version into the consolidation system first.
         at com.sap.aii.ibrep.server.transport.impl.service.InternalRepTransportServiceImpl.checkSwcvExistence(InternalRepTransportServiceImpl.java:316)
         at com.sap.aii.ibrep.server.transport.impl.service.InternalRepTransportServiceImpl.createSupportPackage(InternalRepTransportServiceImpl.java:283)
         at com.sap.aii.ib.server.transport.impl.service.TransportServiceImpl.createSupportPackage(TransportServiceImpl.java:362)
         at com.sap.aii.ib.server.transport.impl.hmi.CmsHmiMethods.process(CmsHmiMethods.java:206)
         at com.sap.aii.utilxi.hmis.server.HmisServiceImpl.invokeMethod(HmisServiceImpl.java:169)
         at com.sap.aii.utilxi.hmis.server.HmisServer.process(HmisServer.java:178)
         at com.sap.aii.utilxi.hmis.sbeans.HmisBeanImpl.process(HmisBeanImpl.java:86)
         at com.sap.aii.utilxi.hmis.sbeans.HmisLocalLocalObjectImpl10.process(HmisLocalLocalObjectImpl10.java:144)
         at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:290)
         at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:211)
         at com.sap.aii.utilxi.hmis.web.workers.HmisInternalClient.doWork(HmisInternalClient.java:70)
         at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doWork(HmisServletImpl.java:496)
         at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doPost(HmisServletImpl.java:634)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
         at com.sap.cms.tcs.client.XICommunicator.readWorkspaceData(XICommunicator.java:228)
         at com.sap.cms.tcs.core.RepositoryExportTask.processRepositoryExport(RepositoryExportTask.java:226)
         at com.sap.cms.tcs.core.RepositoryExportTask.process(RepositoryExportTask.java:324)
         at com.sap.cms.tcs.process.ProcessStep.processStep(ProcessStep.java:77)
         at com.sap.cms.tcs.process.ProcessStarter.process(ProcessStarter.java:197)
         at com.sap.cms.tcs.core.TCSManager.assemblePropagationRequests(TCSManager.java:677)
         at com.sap.cms.pcs.assembly.manager.AssemblyManager.assemble(AssemblyManager.java:1510)
         at com.sap.cms.pcs.assembly.AssemblyQueueHandler.execAssembly(AssemblyQueueHandler.java:818)
         at com.sap.cms.pcs.assembly.AssemblyQueueHandler.startAssembly(AssemblyQueueHandler.java:133)
         at com.sap.cms.pcs.transport.proxy.CmsTransportProxyBean.startAssembly(CmsTransportProxyBean.java:829)
         at com.sap.cms.pcs.transport.proxy.LocalCmsTransportProxyLocalObjectImpl20.startAssembly(LocalCmsTransportProxyLocalObjectImpl20.java:1836)
         at com.sap.cms.ui.wl.Custom1.startComponetAssembly(Custom1.java:14080)
         at com.sap.cms.ui.wl.Custom1.assembleQueue(Custom1.java:4685)
         at com.sap.cms.ui.wl.wdp.InternalCustom1.assembleQueue(InternalCustom1.java:2303)
         at com.sap.cms.ui.wl.Worklist.handleAssemblyOptionsEvent(Worklist.java:1487)
         at com.sap.cms.ui.wl.wdp.InternalWorklist.wdInvokeEventHandler(InternalWorklist.java:2520)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
         at com.sap.tc.webdynpro.progmodel.controller.Component.fireEvent(Component.java:283)
         at com.sap.cms.ui.wl.wdp.InternalWorklists.wdFireEventAssemblyOptionsEvent(InternalWorklists.java:388)
         at com.sap.cms.ui.wl.Worklists.fireAssemblyOptionsEvent(Worklists.java:247)
         at com.sap.cms.ui.wl.wdp.InternalWorklists.fireAssemblyOptionsEvent(InternalWorklists.java:328)
         at com.sap.cms.ui.wl.AssemblyOptions.onActionStartAssembly(AssemblyOptions.java:276)
         at com.sap.cms.ui.wl.wdp.InternalAssemblyOptions.wdInvokeEventHandler(InternalAssemblyOptions.java:339)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
         at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Info:Step Repository-export ended with result 'fatal error' ,stopping execution at 2008-10-08 05:36:32.0376 -4:00

    Hi,
    Fatal Exception:com.sap.cms.tcs.interfaces.exceptions.TCSCommunicationException: communication error: Exception received:
    ClientServerException exception:Software component version 58a66500336b11dd8387f3c70a53b4e5 has not yet been imported into the system and therefore cannot yet be assembled using CMS. You must execute a CMS- or file-based import of the software component version into the consolidation system first.
    The error is saying that there might a communication issue with CBS to CMS. That's the reson the imported SCA version is not available in the current system to assemble. The NWDI restart may work some times.
    Thanks
    Krishna

  • Problem in Assembly Processing in Project System

    Hello All,
    My Client want to implement Assembly Processing. We have configured the system as per SAP Standard. we are testing this in Quality System along with SD & PP Modules. we have template which contain Material WBS Process WBS & Other Cost WBS But we are getting all cost of material and process cost on one Material WBS after Production order confirmation. How can we divide this cost separately for Material & Process WBS.
    As SAP Standard Process we maintained activities for different process also but when we tested this we are not clear about the use of these activities. We are not getting any cost or don't have any relation in any way for these activities.
    Please Help me about this Assembly Process.
    Thanks
    Warm Regards
    Sunil

    1. Create a Inquiry in VA11 --OK
    *2. Create Quaotation in VA21 wrf to Inquiry*--OK
    3. Create a Sales order in VA01, while creating sales order, as soon as we assign the material component in SD line item a pop will come for entering std wbs, std ntw, network profile. once we enter this at bottom we can see that scheduling is carried out. Note: if we define material/std wbs/std ntw in CN08 then pop will not come. Now check for errors and save the sales order, at bottom we can see that project order is created. Note: Project number is same as sales order no:---OK
    4. in Billing plan tab at item level we can see the milestones for new project.--In sales order i don't see any milestone or any type of setting. can you please tell me about this we are not able to execute milestone billing in our case.
    Ans to Query: For Milestone billing to work you need to do the following settings in SAPSD
    1.     Create Billing Plan in SD and assign the Billing Plan to Sales Document type you are using. Path: IMGSDBillingBilling Plan
    2.     In the above node , do settings for Define Billing Plan Types, Define And Assign Date Categories, Maintain Date Proposals For Billing Plan Types, Assign Billing Plan Types To Sales Document Types, Assign Billing Plan Types To Item Categories.
    By doing above settings you will get an additional tab u201CBilling Planu201D in Sales order where you can get the milestones generated for new project. For exiting project you can copy milestones to SD from project.
    If you want Billing Plan at sales document item level, assign the billing plan type in Item category.
    5. In Sales order we can see that billing lock is set against the milestones.---Not Found
    Ans to Query: By doing the above settings as in slno 4, you can see the billing block against the milestone*6.Now open the project in Cj20n and go to network we can see sales order no with line item no.*---OK
    7. Now verify the mile stones in the project.--Adding milestone but no effect in billing
    *Ans to Query : you can see that milestone no in Sales order and Project will be same. Note: Subject to in your standard network you should have milestones, so that we you create a sales order new milestones will get generated wrt to milestones in Std network. So when project is created you can see mile stones are also created.*8 .check the requirement list in MD04 against the Finished product we can see that requirement is generated againt project wrt to sales order.---No requirement is displayed .
    To generate the requirements. Check the settings in requirement class.
    9. Run MRP in MDBT/MD02/MD01, based on procurement type in MM , PR's and Pld order will generated. Note: ALL PR's and PLD Orders are account assigned to WBS.---When we execute this MRP this is not picking requirement from project. BOM created by CS01. if we assign material to activity than this MRP is picking requirement from project.
    10. Now do Pr>PO>GR>(ALL all accounted against project.--OK
    11. Convert Pld order to Production order> release the order> Goods issues against production order.--OK
    12. Confirm the Procution order wrt routing operation one by one in CO11N.--OK but we want sageregated cost for material cost and process cost to different WBS as we have material WBS and Process WBS.
    Ans to Query: This is not possible because in Assembly order processing single account assignment is only possible for the finished products, and for that finished product routing is also account assigned to the WBS assigned to Production order. So operation cost comes and sits in same WBS. If at all you want to track separately you can  transfer the actual cost for process to process WBS in tcode:KB11N
    Using KB11N tcode we can manual transfer cost from one WBS to another WBS.13. in cost element reports at projects we can see the cost breakup for all production activities as well as for material.--you mean CJI3 report 
    *Ans to query: Yes you can see in CJI3 report or in SALR_870135452 report also_*14. settle the production order.----where to settle this production order? and how?
    *Ans to Query: For assembly processing account assignment is u201CQu201D so automatically in production order we can see the settlement rule is set against the WBS. So the cost from production order is settled to WBS and subsequently from project to the respective receiver as per settlement rule in project.*
    15. conform all activities in Project.----OK CN25 or CJ20N
    In any of the above tcodes
    16. Do billing in SD as when when mile stone reaches to post actual revenues.----OK
    17. run RA in KKA2 and save the RA results--OK
    18. Run settlement in CJ88 ---Not using any settlement
    19. set the status of Project as Teco and Clsd.---OK
    Please let me know if you need more clarifications
    Regards
    kishore
    Edited by: Virendra Pal on Jun 1, 2011 11:53 AM
    Please do not use bold and underline text message short cuts etc - in future your posts will be removed
    Secondly all that you are mentioning is available in SAP Help or in the wiki

  • AS2 Receiver Error: MIC not verified # unexpected-processing-error

    When sending out a test message using Seeburger AS2 receiver channel I get the following error:
    MIC not verified # unexpected-processing-error
    So obviously this problem is related to digital signature I think? However I get the same error even if digital signature is deactivated in the communication channel.
    Do you have any idea on this?

    Hi ,
    I have been facing this error and tried all the refresh and reimporting of certificate.
    "MIC not verified # unexpected-processing-error"
    could you be bit specific how to fix this ?
    thanks in advance
    Praveen

  • Bug Report: #SQLERRM_TEXT# in Process Error Message

    According to the Online Help for "Process Error Message" #SQLERRM_TEXT# should be replaced by "Text of error message without the error number". But it isn't.
    Patrick
    My APEX Blog: http://inside-apex.blogspot.com
    The ApexLib Framework: http://apexlib.sourceforge.net
    The APEX Builder Plugin: http://sourceforge.net/projects/apexplugin/

    I created an after submit PL/SQL process:begin
      raise_application_error(-20000,'custom error text');
    end;In the process error message attribute, I put:
    My error message with #SQLERRM_TEXT# in it.
    I submit the page and see this page:ORA-20000: custom error text
         Error      My error message with custom error text in it.
    OKScott

  • XML Publisher post-processing error 'java.io.FileNotFoundException'

    Hi,
    We are getting following XML Publisher post-processing error while running XML Publisher report.
    It was working earlier but suddenly its erroring out.
    [9/07/10 9:00:17 PM] [OPPServiceThread1] Post-processing request 559655.
    [9/07/10 9:00:18 PM] [39177:RT559655] Executing post-processing actions for request 559655.
    [9/07/10 9:00:18 PM] [39177:RT559655] Starting XML Publisher post-processing action.
    [9/07/10 9:00:18 PM] [39177:RT559655]
    Template code: XXHPOXPRRFLR
    Template app: XXH
    Language: en
    Territory: 00
    Output type: PDF
    [9/07/10 9:00:18 PM] [UNEXPECTED] [39177:RT559655] java.io.FileNotFoundException: /apps/oracle/DEV/inst/apps/DEV_hlt439erplap001/logs/appl/conc/out/o559655.out (No such file or directory)
         at java.io.FileInputStream.open(Native Method)
         at java.io.FileInputStream.<init>(FileInputStream.java:106)
         at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:274)
         at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:173)
    [9/07/10 9:00:18 PM] [39177:RT559655] Completed post-processing actions for request 559655.
    Please help me out to resolve this issue.
    Thanks & Regards,
    Sagarika

    Hi,
    java.io.FileNotFoundException: /apps/oracle/DEV/inst/apps/DEV_hlt439erplap001/logs/appl/conc/out/o559655.out (No such file or directory)Most probably this file is not created (since no changes have been done recently, so definitely it is not a permission issue), and if there are any log files generate at the client side it should help in investigating the issue.
    Thanks,
    Hussein

  • Once in a while, I get some errors with every tap on the screen, I've been getting this following error since a few days ago, it says" Your request cannot be processed, Error code 1009" . What is it and what should I do?

    What does this error mean?! " your request cannot be processed, error code 1009".

    Read through this article for iTunes Store troubleshooting:
    http://support.apple.com/kb/TS3297

  • "No Child Processes" Error

    When I am downloading certain files from the internet, the files are not mounting, and I am getting a "No child Processes" Error. I have run the apple repair disc over the computer, however, the problems is still happening. Can anybody help to me fix this problem???? Thanks

    Hi-
    Welcome to Discussions!
    Is it possible to download what you want from a different server? The error could well be the result of file problems on the other end.
    To further insure that it isn't your system, run a full set of maintenance scripts, and clear logs, caches, and other temporaries.
    A last item to "clear" your machine, would be a restart be fore trying to download.
    Should these proceedures fail to fix the problem, I would consider the problem to be with those "certain files".

  • PTO Carry Over Process errors out

    Hi ,
    I am trying to run the PTO Carryover process and I am giving the parameters for calculation date - 01-jan-2010 and accrual term as 'Previous'.
    I have a biweekly payroll and payroll period is '28-dec-2009' to '10-jan-2010'. We are using the seeded 'PTO_PAYROLL_CARRYOVER"
    formula in accrual screen. when I run the PTO Carryover process I am getting the below error.
    ORA-20001: An error has occurred in a user defined function at line 130 of the formula PTO_PAYROLL_CARRYOVER.
    The error text associated with the function call is:
    The system cannot calculate accruals for this date becuase the employee's payroll did not exist for the full accrual term..
    Please correct the problem with the function call, or contact your system administrator or support representative.
    I assume that i am getting this error because 31-dec-2009 falls in between payroll period 28-dec-2009 and 10-jan-2010. the seeded formula is calculating
    as of 31-dec-2009 which is in between payroll period. Can you please help me. we need to do the carry over process.

    Hi,
    What is the application release?
    Please see if these documents help.
    Note: 402404.1 - PTO Carryover Process Error: ORA-20001 Line 39 Of The Formula PTO_PAYROLL_CARRYOVER
    Note: 473272.1 - PTO Carryover Errors ORA-20001: An Error Has Occurred In A User Defined Function At Line 65 Of The Formula PTO_PAYROLL_CARRYOVER
    Regards,
    Hussein

  • Error receiving AS2 message from partner: B2B-50037:  B2B inbound message processing error

    B2B/SOA 11.1.1.6.0
    We are setting a new trading partner and when we started document transmissions we are getting errors on the inbound messages: B2B-50037:  B2B inbound message processing error.
    The attachment shows the relevant lines from the soa log and diagnostic log files.  Here is the error detail that shows:
    [URI: /b2b/httpreceiver] Error -:  B2B-50037:  B2B inbound message processing error[[
    Error -:  B2B-50037:  B2B inbound message processing error
            at oracle.tip.b2b.engine.Engine.processIncomingMessageImpl(Engine.java:3143)
            at oracle.tip.b2b.engine.Engine.processIncomingMessage(Engine.java:1650)
            at oracle.tip.b2b.transport.InterfaceListener.onMessageLocal(InterfaceListener.java:403)
            at oracle.tip.b2b.transport.InterfaceListener.onMessage(InterfaceListener.java:214)
            at oracle.tip.b2b.transport.basic.TransportServlet.doPost(TransportServlet.java:754)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
            at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
            at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
            at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
            at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
            at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
            at java.security.AccessController.doPrivileged(Native Method)
            at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
            at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
            at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
            at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
            at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
            at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
            at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
            at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
            at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
            at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
            at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
            at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
            at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
            at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
            at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    From the b2b_wire_message we get these Protocol_Transport_BINDINGS:
    ChannelName=TransportServlet
    Reverse-Via=LIN-ISA1
    AS2-To=accobra.....
    Date=Fri, 26 Sep 2014 05:46:17 +0000
    AS2-Version=1.2
    AS2-From=K.......
    Disposition-Notification-Options=signed-receipt-protocol=optional, pkcs7-signature; signed-receipt-micalg=optional, sha1
    Disposition-Notification-To=http://<ip&port>/as2in
    Message-ID=<[email protected]>
    MSG_RECEIVED_TIME=Fri Sep 26 00:46:17 CDT 2014
    ECID-Context=1.0050z5j^buc6yGn6wnZf6G0002f60007bt;kXjE1ZDLIPGIj2QCYV8QoKSSmLRO_PQT_IS
    Content-Type=application/pkcs7-mime; smime-type=enveloped-data; name=smime.p7m
    Proxy-Client-IP=172.17.25.101
    MIME-Version=1.0
    User-Agent=e-integration AS2 Server V 6.1.8
    X-Forwarded-For=172.17.25.101
    Content-Length=3602
    Host=nalinsoa05.abd.ad.acco.com
    x-weblogic-cluster-hash=QoZzGUzdcjBD5fGIE8Uos5abiHI
    EDIINT-Features=multiple-attachments, CEM
    Connection=Keep-Alive
    X-WebLogic-KeepAliveSecs=30
    X-WebLogic-Request-ClusterInfo=true
    The message creates a wire message, business message, and an application message.
    What doesn't happen is no MDN gets sent back to the partner.  It should be a synchronous MDN.
    We have double checked the certificates on both ends and they are OK.
    The document and Agreement get recognized OK:
    Refer To Message
    Refer To Message
    Sender Type
    AS2 Identifier
    Sender Value
    K. . .
    Receiver Type
    AS2 Identifier
    Receiver Value
    accobr. . .
    Sender
    K. . . l
    Receiver
    ACCO . . .
    Agreement Id
    K. . .l_EDI_X12_4010_856_856Def_Inbound
    Agreement
    K. . .l_EDI_X12_4010_856_856Def_Inbound
    Document Type
    856
    Document Protocol
    EDI_X12
    Document Version
    4010
    Message Type
    REQ
    Direction
    INBOUND
    State
    MSG_ERROR
    Acknowledgement Mode
    SYNC
    Response Mode
    ASYNC
    Send Time Stamp
    09/26/2014 12:46:17 AM
    Receive Time Stamp
    09/26/2014 12:46:17 AM
    The error is vague enough to provide little or no help in locating the root cause of the issue.
    Any assistance in providing information on how to get this working would be greatly appreciated.
    We do have dozens of other AS2 partners working in this instance just foe reference.  We are just having issues with this new partner setup.
    Thank you.
    Regards,
    Ken

    Ken,
    I am observing the Ack Mode is set as "SYNC" . This is selected by default. This option is available in the channel configuration section
    If the usecase is not SYNC, please change as ASYNC and test. It should work.

  • An unexpected processing error occurred. Please contact Microsoft

    Before I get flamed like I did on StackOverflow, can I please make the point that there does NOT seem to be a clear route for getting official support for the Live SDK from Microsoft? I'm just trying to get someone from Microsoft to explain to me either
    what I need to be doing to my code OR how best to reach out to someone at Microsoft regarding this particular issue.
    Using this C# code:
    LiveConnectClient liveClient = new LiveConnectClient(currentSession);
    LiveOperationResult operationResult = await liveClient.GetAsync(file.FileLocation);
    dynamic contentResults = operationResult.Result;
    IDictionary<string, object> item = contentResults as IDictionary<string, object>;
    the following exception occurred on the GetAsync call:
    Microsoft.Live.LiveConnectException occurred
    HResult=-2146233088
    Message=An unexpected processing error occurred.
    Please contact Microsoft.
    Source=mscorlib
    ErrorCode=server_internal_error
      StackTrace:
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task
    task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task
    task)
       at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
       at Relative_History.OneDriveViewModel.<GetPictureURL>d__86.MoveNext()
      InnerException:
    I've not encountered this exception before and the code works as-is on other files. Restarting the app and the code works as expected so I'm not sure what I'm supposed to do other than "contact Microsoft" as instructed and, as stated at the start
    of this post, Microsoft don't say HOW to contact them.

    Hi,
    Do you have some anti-virus software installed and set to scan network drive, temporarily disable it, check if that is the cause.
    I also suggest you update the firmware of your router.
    Please alos share more information in event viewer with us as mentioned by ZigZag31343x
    Meanwhile you can contact the support of My Book Live
    http://wdc.com/en/products/products.aspx?id=280
    NOTE
    This
    response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
    Microsoft
    does not control these sites and has not tested any software or information found on these sites.
    Regards
    Yolanda
    TechNet Community Support

  • I need help, i can't download free applications in App store. they answer me "your request cannot be processed Error code:1009". and after they said "we could not complete your request. There was an error in the App Store. Please try again later (nul

    i need help, i can't download free applications in App store. they answer me "your request cannot be processed Error code:1009".
    and after they said "we could not complete your request. There was an error in the App Store. Please try again later (null)".
    COMPUTER DETAILS: MacBook Pro 13-inch, Mid 2012 OS X Version 10.9.5; Processor 2,5GHz Intel Core i5; Memory 4 Go 1600 MHz DDR3.
    Thanks beforehand!!!

    Error
    what is error code 1009?

  • HT4623 I can not get connected to App Store , download or update any apps,  EVEN I DID RESET ALL SETTING , STILL I RECIEVE A MESSAGE says: YOUR REQUEST IS NOT PROCESSED ,ERROR COD: 109 !! WHAT DOSE IT MEAN? HOW CAN I SOLVE THE PROBLEM??

    I can not get connected to AppStore , DOWNLOAD OR UPDATE ANY OF MY APPS , WHEN I GO FOR INSTALLING , THE MESSAGE SAYS: YOIR REQUEST IS NOT PROCESSED ,  ERROR CODE, 1009!!! HOW CAN I SOLVE THIS PROBLEM??

    Try contacting the iTunes support staff, they do the app store also, at:  http://www.apple.com/emea/support/itunes/contact.html

Maybe you are looking for