Assembly Scrap Rate and Quality Notification

Hallo Gurus,
i have a big question!!!
I have to include scrap rate in order to guarantee that the MRP generate suggestions that consider the high scrap of my production processes.
The best solution is including Assembly scrap rate in MRP1, but unfortunately this cause problem in QM01 when I have to create a QP ( Production Quality Notification ).
The problem is because we launchProduction Order of1 and SAP doesn't allow me to create QP of a non integer QTY
ES:
Prod.Ord=1
Assembly scarp rate=100%
When i have to do a QP i have a complaint qty of 0,5 due to a scrap of (100%=0,5)
But the sistem doesn't allow me to generate a QP for such a fractional qty.
Any solution to force the creation of a QP of a non integer qty of other ideas?
Please help me, i know you certainly can!!!
Thanks, Ludovico

Hello Amol,
Thank u for your interest.
Here is the problem.
Thank you for the help.
Step1--> Assembly Scrap Rate Implementation on MRP1 View
Step2--> Production Order Creation
Step3-->Quality Notification Problem

Similar Messages

  • Work Center and Quality Notification

    Hi
    Can any one help on linking Quality table (QMFE / QMEL) with work centre info from COOIS .
    We have to get the work center from the above Tcode in to our quality data source. When I checked in this field and table it is derived from a structure (AFVGD - ARBPL). Is there any other place or table I can get this work centre data ? We need this in to Quality for control Key (AFVGD-STEUS) ZZ40 only.... Thanks in advance for the help!!!

    Hi ,
    Please check in table CRHD
    Also check this thread for more info
    Table linking Routing and work center.
    -Mayuri

  • Quality Notifications (QM-QN)

    Experts,
    I am new to Quality Management and Quality Notifications (QN).
    I need to understand QN before as there is a requirement for implementing it to BI.
    Pls can anyone provide:
    a. A good functional writeup on how QN is structured and how it works. I have seen the help.sap but needed a precise document.
    b. Underlying R/3 tables
    c. Transaction codes to view notifications.
    Thanks,
    Jain

    hi
    check this path
    Logistics  -->Quality Management  -->Quality Notification
    QM01 - Create
    QM02 - Change
    QM03 - Display

  • Email and sms alerts against Quality Notifications

    I need to send an e-mail and an sms alert to various people within the organisation and to the respective vendor whenever I create a Quality notification. I also need to attach a copy of the print out of the notification in Smart form alongwith the mail. Please suggest.
    Regards
    Sudhir

    Hi,
    You can send the e-mail to all concerned via standard workflow or via using some exits at the time of saving of notification also.
    Thanks
    SUMIT

  • Using Quality Notification ONLY and not others in QM function, ok?

    Hi,
    I am wondering if the quality notification can be used (i.e.to help department initiate complaints, either internally or externally)without the use of QM module.
    Basically, we do not have QM department, and we don’t need to inspect stuff on receiving material, we are just trading company. But, one of the function in QM called Quality Notification can be used to makes complains and hence, we just wondering if we do not customized the full QMsetting but just only customize Quality Notification Setting (like QN type), can we use this Quality Notification?
    Thanks,
    Tuff

    Hello,
    Yes, you can use it and you can customize the notification type as per your requirements.
    Well, in standard 6 QN type presents. # for complaints and 3 for defect analysis. Q1, Q2 and Q3 are for Complaint records and there analysis. While F1, F2 and F3 are for Defect records and analysis.
    You can customize them , change screen tabs and fields as pe ryour requirements and implement where you exactly required.
    Regards

  • Auto Quality Notification and Return Delivery Via Usage Decision

    Hello Gurus
    Need help !
    I am using the Quality inspection with Material Specification.
    Just an overview of my current system settings -
    Inspection Type 101 for Purchased parts , My Inspection characteristics and Batch Charracteristics are linked .Batch classification is updated as a result of Usage Deceision
    My Requirement -
    If the Inspection lot is getting rejected , system should trigger the Quality notification and return delievery automatically .
    Can someone pl help me with detailed steps for acheiving this...
    Reqward points will be given immediatly for sharing thoughts
    BR

    Hi
    Thanks for reply.
    I think I missed some thing in my question
    I understand that this is Standard Sap when you post the stock into Return Deilivery stock , it 'll do the movement type 122 and create the material docuement.
    However My requiremnet is to get the Delivery Document number with the reference of which i can do the PGI .
    I gone thru the SAP help and learnt that we can trigger the Quality notification automatically if we reject the inspection lot...But not confident "how" as never done before..that the reason i posted my query if someone has done this before..
    OR
    Any option to create Delivery  Document when rejecting one Inspection Lot is UD..W/o Notification also will work for me..
    So I am aiming to get Delivery Document not material document as our materials are WM managed...
    Could some one put some light on this...
    BR

  • Restricting authobject I_QMEL for Quality notifications and HR PCRs

    Hello,
    We have encountered an role conflict when the authorization object I_QMEL is used both for Quality notification and HR PCR access on the portal.  Here is the scenario.
    Quality Administrator has I_QMEL for:
    - notification type X
    - transaction IQS1 and IQS2
    - all work is done in the GUI
    Employee who is a Manager has I_QMEL for:
    - notification type Z
    - transactions IQS1 and IQS2
    - all work is done on the portal
    The role conflict arises when one user has both the Quality Administrator role and the Manage role.  The user can then use the GUI to view notifications of type Z - that any manager has submitted.  This means the user can view all personnel change requests in the systems.  These PCRs contain sensitive information.
    Any ideas on how I can design the security such that this role conflict is suppressed?
    Thanks!

    Hi Vicky,
    I have the same problems you had. I also need to implement your requirements 2) and 3)
    How have you solved your requirements? Please let me know your solutions.
    Thanks in advance
    Sarah

  • Assign Execute and Review for Quality Notification

    Hello Experts,
    Can we configure the workflow WS24500047 or is their any change in configuration in SPRO so that we can make the following business scenario.
    1- Quality Administrator will create quality notification in QM01.
    2- Quality Administrator will assign the task to the responsible person for eg. User1 is responsible to complete the task to fix a bolt of a machine
    3- After fixing the issue. User1 will make the the task complete and request to close the task
    4- Other User say Reviewer will see the request from User1 and finds the the task is properly done and he will make a request to the approver to close the task
    5- The approver will approve the request and close the task.
    6- And if the all the task of the quality notification is complete then
    quality administrator will complete the quality notification and close the task.
    in other words.
    QA (will create the Quality notification and assign to user) --> User1 (Fix the issue and make a request to complete the outstanding task to the reviewer ) --> Reviewer (Inspect and make a request to the Approver to approve and close the outstanding task) --> QA (finally close the quality notification after completion of all Outstanding tasks)
    Thanks and Regards,
    Kuldeep Verma

    Hi Kuldeep,
                       You have to generate 3 SAP Login ID's like ...
    1. Q_01 : Who will have the rights of Creating & Changing the Notification. He will also have the right to complete the Notification as wel as revoke it.
    2. Q_02 : Who will have the rights to enter the details about the Task and its activities as you said fix a bolt on machine.
    3. Q_03 : Who will have the rights to review the whole process thru closing the Task.
    I feel that there is no need to have fourth one in picture as your all requirement can meet within these three.
    Please revert with comments.

  • Automatic generation of Quality notification of type Q1 and/or F1

    Hi,
    Can anybody give me the steps to generate F1 and/or Q1 quality notifications automatically. Please give me detailed process which should i fallow to achieve this.
    Thanks in advance.
    Anand K

    It is not possible to create Q1 and F1 notifications automatically

  • Quality Notification and Inspection Lots

    Hello everyone:
    Does anyone have an SAP environment in which the quality notifications are generated automatically followed by inspection lot creation? In these instances please explain how you manage to assign the quality notifications to the related inspection lots.
    I am working on a project to create quality notifications at the time of receipt into quality inspection stock then inspection lot creation/results recording and subsequent automatic closure of quality notifications.
    Appreciate your feedback.
    Thank you.

    Genrally it's not the way it operates, but I can understand the way business forces their requirements on SAP team. The way you have given the requirements, it can done but everything has to be done through development. I never come across this type of requirement but you can check the following stuff.
    1. As per SAP, once the material is received (any case Ware houes managed/ or simple IM) based on the master data set up system creates inspection lot and put the quality into stock. So, If you want to create q -note prior to inspection lot creation either it should be manual or independant of goods receipt. I suggest, find a user exit which fires at the time of GR (just before insp.lot gets created) and create the q-note based on the information from the p.o. There standard sap BAPI's available, so no complex developmen is required. Just need to find the correct user exit and timing of creating q-notes. What minmum required fields for your q-note? Do you want any defects info to be passed on to q-note from the data you maintain in MIC? You need see all these things before you go with creating prior q-note.
    2. The biggest challenge will be mtaching the q-notes created in advance to the defects/out of spec. recorded during result.recording. Again if you have a smart developer, I think it is possible. Find out the user exit/ or any BADI which can be used when the results are out of spec., turn on standard settings of SAP to create a defect record but while q-note is generated(standard sap functionality) for defect - force your logic to find out the corresponding q-note which was already created and update it with defect info. You can explore passing p.o/item number as refe. no to q-note when it was created and same can be used in add. to your Material/plant/serial no if required.
    I am sure, it's a challenging one and not the normal way we do in sap, but you have to go for it if business insists. In general its not the way I have seen, may be other experts might have come across.
    Hope it helps.
    Thanks,
    Ram

  • QM quality notification : existence check and modify

    Hi,
    I would like to know if there dedicated BAPi or standard module function to perform following tasks on QM quality notifications (QM02 /QM03 notifications).
    - existence check from notification type and number
    - data changes such as tasks, header data, status
    - lock object
    Do you also know some document with relation diagram about involved data tables such as VIQMEL, QMFE QMUR and so on ?
    Thanks for help
    Regards
    morgan

    Hi Bala,
    Please see the below links:-
    http://help.sap.com/saphelp_46c/helpdata/en/58/e82c7dd435d1118b3f0060b03ca329/content.htm
    http://help.sap.com/bp_pharmav1500/Pharma_DE/Documentation/GxP_Assessment_List.pdf
    Regards,
    Anil

  • Bapi to create quality notification with inspection lot and defects of char

    Hello experts,
    Can any body tell me how to create notification using inspection lot.
    regards
    Narendranath Reddy

    Hi Narendranath,
    Have you tried BAPI_QNOTIFICAT_CREATE? Based on inspection lot data, you should have the data you need to create a quality notification.
    Good luck.
    Best regards,
    Guus
    Edited by: Guus Jansen on Feb 2, 2011 10:05 AM

  • Assembly scrap in REM scenario

    Hi Experts,
    My scenario is relevant to REM, during back flush in transaction MFBF am posting the assembly scrap by selecting assembly scrap radio button and in the scrap posting screen with reason of variance, as per logic the quantity of the plan order should be reduced by scrap quantity, am able to see the goods issue document but the plan order quantity is not getting reduced.
    Are there any specific setting needs to be done for posting of assembly scrap?
    Please help to explain the complete process of assembly scrap in case of REM.
    Regards
    cs

    Hi Anupam,
    I have checked the process as per your advise and it is working fine, but here am having an issue as if am scraping through quality it is scrapped with movement type 553, which is booked as loss.
    But actually we are retrieving the components from these 5 units and reusing them in another FG.
    As we are working with REM we are using CO07 production order without material for rework purpose in that case the scrapped assembly is issued to production order and components are retrieved with 531.
    Is there any possibility that the scrapped assembly can be shown as stock and issuance can be done?
    Or how can we address this scenariou2026
    Regards
    Chandan

  • Send Email from QUality Notification

    Can we send an email to internal/ external address from Quality Notification without any development? It should be SAP std (out of box) functionality.
    How?
    Reply highly appreciated.

    Yes there is a Standard functionality available in SAP use the tcode scot and confifure the SMTP.
    Prerequisites
    The mail server in question must be SMTP-compatible.
    Settings for the Profile Parameters (Transaction RZ10)
    You have to adjust the profile of the SAP Web Application Server if you want to use the SMTP function. The SAPconnect send job can only be scheduled for servers on which SMTP has been activated. For this reason, you must activate SMTP for all of the SAP systemu2019s application servers.
    icm/server_port_<*> = PROT=SMTP,PORT=<port>
    is/SMTP/virt_host_<*> = <host>:<port>,<port>,...;
    User Maintenance (Transaction SU01)
    u2022        Service user
    You have to create a service user for processing incoming mails in every SAP system client in which you want to receive mails (or status notifications). Call transaction SU01 to create a user with type Service and assign the profile S_A.SCON to this user.
    u2022        User addresses
    Every user that is to receive e-mails in an SAP system requires an Internet mail address. This is also used as a sender address. Enter the Internet mail address for a user in transaction SU01, under E-Mail on the tab page Address.
    Assigning the Client (Transaction SICF)
    Every SAP system client that is to receive and process incoming mails (or status notifications) must have an SMTP server. One SMTP server (SAPconnect) has already been created in transaction SICF and is delivered with every SAP system. Use this to create the first client and then create another SMTP server for each additional client. Configure the following settings on the SMTP servers:
    u2022        Host data
    Enter the sequence number of a parameter is/SMTP/virt_host_<*> from the profile. If you have only created one client and therefore have not specified this parameter type, enter 0.
    u2022        Service data
    Enter the client to which the mails received through the virtual mail host are to be forwarded, and then enter the logon data of the system user that you created for the incoming mails.
    u2022        Handler list
    Enter CL_SMTP_EXT_SAPCONNECT at position 1.
    SAPconnect Administration (Transaction SCOT)
    You have to configure SAPconnect settings for every client that is used for send processes.
    u2022        Default Domain
    Under Settings  Default Domain, define the domain of the SAP system client. This allows for the following to take place:
    u2022         The SMTP plug-in logs on to the mail server using the domain as ID.
    u2022         The message ID of the outbound e-mails is assembled with this domain.
    u2022         If an SAP user who does not have an Internet mail address sends an e-mail, a sender address consisting of the SAP user name and this domain is generated.
    u2022        Nodes
    Each client has an SMTP node. This node is created by the SAP system and cannot be deleted. The following steps need to be carried out to configure the node so that sending Internet mail is possible:
    i.         Make sure you are in the Node view.
    ii.       Double-click the node name.
    iii.      Choose Node in use.
    iv.      In the Mail Host and Mail Port fields, specify the mail server to which the outbound mails are to be sent.
    v.        Next to Internet, choose Settings.
    vi.      Enter the address area of the recipient addresses that are to be reached using this node. In general, * is used if all e-mails are to be sent using SMTP.
    vii.     Enter the output format for SAP documents. We recommend that you use the following settings:
    SAPscript/Smart Forms     PDF
    ABAP list     HTM
    Business Object / Link     HTM
    RAW Text     TXT
    viii.   Confirm your selection.
    Regards,
    Sumeet M Naidu

  • Report for the list of materials with component & assembly scrap

    Dear Experts ,
    I have been told to generate a report for the materials which are subjected to component and assembly scrap . Please guide me for the same . Many thanks in advance.
    Yours
    Aman Khan

    Dear Aman,
    It you are maintaining both assembly scrap  & component scrap both in MM you can read MARC table by creating simple query.
    Read Field MARC-AUSSS & MARC-KAUSF.
    If you are maintaining component scrap in BOM item read STPO-AUSCH.
    [Query Creation|How do create query in SAP?]

Maybe you are looking for