Assertion Error: Cannot Load Dyamically Generated Stub

Hi Everyone,
I am getting an Assertion Error in Weblogic 9.2, the root cause being a ClassNotFoundException for a dynamically-generated WL Stub for an Oracle JDBC wrapper. The partial stacktrace is as follows:
ASSERTION FAILED *****[Could not find dynamically generated class: 'weblogic.jdbc.rmi.internal.ResultSetImpl_weblogic_jdbc_wrapper_ResultSet_oracle_jdbc_driver_OracleResultSetImpl_920_WLStub']
Caused by: java.lang.ClassNotFoundException: weblogic.jdbc.rmi.internal.ResultSetImpl_weblogic_jdbc_wrapper_ResultSet_oracle_jdbc_driver_OracleResultSetImpl_920_WLStub
So...not sure if the RMI stub is never generated because/or there is something dorked up in my classpath re: Oracle. Any insight would be awesome
Thanks!
--John                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

Hi yoster,
I have the same problem, but I couldn't solve the problem by removing a war file like you did.
It's nearly the same stacktrace:
ASSERTION FAILED *****[ Could not find dynamically generated class: 'weblogic.jdbc.rmi.internal.StatementImpl_weblogic_jdbc_wrapper_Statement_oracle_jdbc_driver_T4CStatement_921_WLStub' ].
java.lang.ClassNotFoundException: weblogic.jdbc.rmi.internal.StatementImpl_weblogic_jdbc_wrapper_Statement_oracle_jdbc_driver_T4CStatement_921_WLStub
My database is also oracle.
Do you have other ideas that could sold this ?
I hope you do, because I'm stuck ... don't know where to look anymore :(
Toni

Similar Messages

  • Internal error, cannot load engine Number 2 due to error 5

    I have had a StartStop transcription program for several years. I bought my Dell computer with Windows 8 (now 8.1) in late 2014. I had no problems running the StartStop program until it got a tune-up by my regular tech.  Since then, when I click to
    open it, I get the message: "##### Internal error, cannot load engine Number 2 due to error 5."  My tech couldn't figure it out and another tech couldn't fix it either after looking at it for hours.  StartStop could not figure it out either.
    Since then, I bought a Digitope digitalizer, which converts cassette tapes to CD's. When I try to open that program the exact same error message comes up!  
    So I am thinking there is something awry with certain audio programs. I am able to run another transcription program, Express Scribe. 
    Any thoughts!  
    The 2nd tech suggested rebooting the entire computer and reinstalling all programs, but I'm not sure I can find all my original programs. 
    Thanks!

    Hello Silent Fisher,
    What StartStop transcription program do you mean?
    Please share me a screenshot.
    If it is a third-party software, it is recommended to contact the support of the software.
    If the issue occurs after your change, please use the system restore to restore your computer’s system files to an earlier point in time.
    http://windows.microsoft.com/en-HK/windows-8/restore-refresh-reset-pc
    Best regards,
    Fangzhou CHEN
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • JMFSecurity Error: Cannot Load Library jmam

    hi,
    I get below exception when I try to run XletviewJMFExample.java program provided by sun.
    JMFSecurity Error: Cannot Load Library jmam
    I tried to set jmam.dll in the classpath,but I get following error when I compile program from command prompt
    error reading C:\javatv_fcs\lib\jmam.dll; error in opening zip file
    Please help me resolve this problem
    Thanks
    Rajesh

    Hello,
    i am running TestTVXlet on the Fedora Core 3.
    I do set the path variable, but it still shows the "JMFSecurity Error: Cannot Load Library jmam" message.
    Is the problem that jmam.dll is not suitable for linux?
    Any advise will be appreciated. : )
    Best Regards,
    Tony

  • Server Monitor error - "CANNOT LOAD BUNDLE ERR"

    I got 2 Xserve(s) intel based - 1 installed 10.6.8 and the other 10.5.8 - both server(s) are upto date on software updates.
    Server Monitor works fine on both of these server(s) when run locally (from the server). When I run the Server Monitor from my local machine (still in the same network), the server with 10.5.8 works fine, but the server with 10.6.8 shows the error "CANNOT LOAD BUNDLE ERR". I am not sure where I am making a mistake.
    Any help highly appreciated..:)
    Regards,
    -Raj.

    I'm having the same problem.  Were you able to fix it?
    Thanks

  • Error "cannot load request real time data targets" for new cube in BI 7.

    Hi All,
    WE have recently upgarded our SCM system from 4.1 to SCM 7.0 which incorporated BI 7.0.
    I am using BI 7.0 for first time and ahve the following issue:
    I ceated a new infocube and data source of flat file and succesfully created transformation, and Data Transfer Process. Everything looked fine. I added flat file and checked preview and could see data. Now when I start job to load data in infocube the follwing error is shown "cannot load request real time data targets". 
    I checked cube type in setting in infcune is shows as Standard.  When I doube clicked on error the following message showed up
    You are trying to load data into a real-time InfoCube using a DTP.
    This is only possible if the correct load settings have been defined for the InfoCube.
    Procedure
    In the object tree of the Data Warehousing Workbench, call Load Behavior of Real-Time InfoCube from the context menu of the InfoCube. Switch load behavior to Transactional InfoCube can be loaded; planning not allowed.
    I did not understand what it is meant and how to set changes. Can someone advice and follow me through.
    Thanks
    KV

    Hi Kverma,
    Real-time InfoCubes can be filled with data using two different methods: using the transaction for entering planning data, and using BI staging, whereby planning data cannot be loaded simultaneously. With Real time cube you can select the method you want to use for update as
    Real Time data Target can be loaded With Data; Planning not allowed &
    Real Time data Target can be Planned; Data loading not allowed
    You can change this behaviour by right clicking on cube and selecting Change real time load behaviour and select first option. You will be able to load the data then
    Regards,
    Kams

  • Xrpcc modeler error when trying to generate stub classes from a WSDL

    I'm trying to generate JAX-RPC stub classes (both client and server side) from a WSDL in which one of the message parts references a complexType element defined in the <types> section of the WSDL. Here is my little WSDL document:
    <?xml version="1.0" encoding="UTF-8"?>
    <definitions name="Book_Def"
    targetNamespace="myTypes"
    xmlns:tns="myTypes"
    xmlns:xsd1="myTypes"
    xmlns="http://schemas.xmlsoap.org/wsdl/"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/">
    <types>
    <xsd:schema targetNameSpace="myTypes"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema">
    <xsd:element name="Book" type="xsd1:BookType"/>
    <xsd:complexType name="BookType">
    <xsd:all>
    <xsd:element name="authors" type="xsd:string" maxOccurs="10"/>
    <xsd:element name="preface" type="xsd:string"/>
    <xsd:element name="price" type="xsd:float"/>
    </xsd:all>
    </xsd:complexType>
    </xsd:schema>
    </types>
    <message name="runMyPgm">
    <part name="book" type="xsd1:Book"/>
    </message>
    <message name="getPgmResponse">
    <part name="result" type="xsd:string"/>
    </message>
    <portType name="MyPgmIFPortType">
    <operation name="runMyPgm">
    <input message="tns:runMyPgm"/>
    <output message="tns:getPgmResponse"/>
    </operation>
    </portType>
    ... Binding stuff
    </port>
    </service>
    </definitions>
    I've tried many combinations of defining my complex type and input message and whenever I run xrpcc using this WSDL as input, I get a Error: Modeler error: invalid entity name: Book (in namespace "myTypes"). Sorry if this is a dumb question, but what am I doing wrong in my <types> or <message> definitions to cause this error? I've had some luck generating stubs when the part types are all simple types, but I've not had any luck with getting a <complexType> definition accepted by xrpcc. Thanks in advance for any help you can offer.

    Yes you can specify type mapping in configuration file and probably this will solve the problem, but I've never tested this approach. Perhaps I'm not advanced user. Actually the serializerFactory and deserializerFactory are a little vague for me:(

  • Error: cannot load library unit CTXSYS.CTX_CONTAINS

    Anyone know what might be causing this error when doing a query that uses CONTAINS?
    It was working fine, then suddenly stopped working
    [Oracle][ODBC][Ora]ORA-29900: operator binding does not exist ORA-06540: PL/SQL: compilation error ORA-06553: PLS-907: cannot load library unit CTXSYS.CTX_CONTAINS (referenced by CTXSYS.CONTAINS)

    Could you please explain what you mean by recompile packages?
    Sorry - new to Oracle - I'm playing with an Eval and running on NT.
    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Hernan Mejia ([email protected]):
    may be your packages corrupts, I haved a similar problem try to recompile and look for the status of your packages<HR></BLOCKQUOTE>
    null

  • Download error cannot load the DLL (pdh dll)

     I've tried and tried several times to download Skype but half way through the down load I get the following error message: cannot load the DLL (pdh.dll)

    Try to run System File Checker tool (sfc /scannow): http://support.microsoft.com/kb/929833

  • Toad Error - Cannot load OCI DLL: C:\Oracle\instantclient_11_1\oci.dll

    Hello All,
    Help needed to fix this error.
    We are getting the below error from Toad after fresh install on Windows 7 64 Bit.
    Toad for Oracle Base
    Version: 10.6.1.3
    Cannot load OCI DLL: C:\Oracle\instantclient_11_1\oci.dll
    We are using the Oracle Instant Client (instantclient-basic-nt-11.2.0.2.0).
    We are able to connect to the database from the command line successfully, but when we tried to launch the Toad and connect it we are getting the above error.
    How do we fix this issue?
    Thanks in advance.
    Sandeep S

    mseberg wrote:
    So is this a Toad issue or an Oracle client issue?More like a general software or programming "issue". If Toad (or other program) is 32-bit, then loaded libraries (e.g. Oracle Client dll's) needs to be 32-bit.
    I'm sure this is documented in requirements for Toad. See e.g. [url http://toadfororacle.com/servlet/KbServlet/download/4264-102-12585/10.6_ReleaseNotes.htm#SystemRequirements]Toad 10.6 Release notes.
    Edited by: orafad on Aug 10, 2011 2:35 AM

  • Publishing error - cannot load .XLM file

    I have Adobe Presenter 7.0 and have tried to publish a presentation. I receive an error that Presenter cannot load .XLM file. No filename is specified. Any ideas?

    1) Please verify that the mfc42*.dll's on your machine are version 6.xxx.xxxx
    2) Please verify that the sqora32, sqresus, and sqoras32 DLL's are in your %Oracle_home%\bin directory and that that directory appears in your path.
    3) Please verify that you are using the proper version of the ODBC driver (i.e. 8.1.5.10 on an 8.1.5 system, 8.1.6.3 on an 8.1.6 system, etc.).
    Justin
    null

  • Using MBSA 2.2 getting error 'Cannot load security CAB file" when attempting to scan any remote systems

    Could scan all remote servers previously from same sources and version.  Replaced/updated all cabs and other files associated (C:\Documents and Settings\<username>\Local Settings\Application Data\Microsoft\MBSA\Cache) with no change.  Removed/re-installed
    MBSA 2.2 with not effect.
    Local scans appear to function fine, but do not wish to download MBSA on EVERY system we need to scan.
    Settings for remote scan are: Check for security updates>Configure computers for Microsoft
    Update and scanning prerequisites>Advanced Update Services
    options:>Scan using
    Microsoft Update only
    Have attempted from different systems/OS's, with same results.  Checked firewall for any blocked traffic from both host and scanner, no entries.
    Checked Technet/blogged for about two hours, without any positive results. Please advise/assist.
    Regards,
    AJ Lebeau
    MCSE, MCP, MCP+I, CNA, ACNA, A+
    Server Administrator
    Progenics Pharmaceuticals
    [email protected]
    (914) 789-4558

    Thank you for sending this to the MBSA forums!
    If you haven't already, you may want to check the MBSA FAQ located here:
    http://technet.microsoft.com/en-us/security/cc184922 specifically under the sections titled, "How can I scan a computer that is protected by a firewall" (to resolve potential DCOM connectivity issues), and "When attempting to scan a remote machine,
    why do I see the error 'Cannot deploy security metadata?"
    This is also a very misleading error message since the problem could be due to connectivity to the target (client) machines - nothing relating to the CAB file.  In any circumstance, you should not need to install MBSA on all of the target machines to
    successfully assess their security state. 
    Possible solutions include
    Confirm the latest WUA client is installed on all target machines (with the files you've already placed in the cache directory, you can simply check the scan option to "Configure computers for Microsoft
    Update and scanning prerequisites" - which will update and re-register each target machine with the latest WUA client and the ability to respond to requests from MBSA.
    Check whether the target machines have limited disk space (unlikely)
    Check DCOM settings on both the server - but more likely due to the failure to remotely scan - the target machines.
    Change the scan options to further troubleshoot.  Specifically, 'Check for security updates' option uses a DCOM connection to the target WUA client while the other scan settings 'Check for weak passwords, etc." use specific UDP/TCP ports as indicated
    in the System Requirements section of the MBSA help file and the MBSA FAQ.  Also use the 'Advanced Update Services options' to determine whether WSUS connectivity may be at issue.
    Please let me know if that helps.
    Doug Neal - Microsoft Update and MBSA

  • Firefox will not open error: "cannot load XPCOM"

    Tried to get on FF and I keep getting this message "cannot load XPCOM"
    Also, I red directions on how to "reach" my profile, and I get 3 messages telling me my profile cannot be read.
    I am s'posed to be the "administrator" but I can['t make any changes Help!

    Create a new profile as a test to check if your current profile is causing the problem.
    See "Creating a profile":
    *https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
    If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over problems.
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
    *Download the full Firefox installer and save the file to the desktop<br>https://www.mozilla.org/en-US/firefox/all/
    If possible uninstall your current Firefox version to cleanup the Windows registry and settings in security software.
    *Do NOT remove "personal data" when you uninstall your current Firefox version, because this will remove all profile folders and you lose personal data like bookmarks and passwords including data in profiles created by other Firefox versions.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    *(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
    *(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    *http://kb.mozillazine.org/Uninstalling_Firefox
    Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure NOT to remove personal data when you uninstall Firefox as that will remove all Firefox profile folders and you lose your personal data.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • After closing the Firefox browser, a message appears "Severe error: Cannot load resource file; can not run". What could be wrong?

    The message: "Severe Error; Can 't load resourse file; can not run" appears after closing Firefox4. All other applications on my pc do not have this problem.

    I've found text of this error in npdjvu.dll plugin, remove it and error seems to disappear.

  • File not found error while trying to generate stub using wsdl2java

    Hi
    I am facing this peculiar problem while generating the stub thru the wsdl2java command.
    It shows series of file not found exception.
    What all thing need to be set or taken care while we execute the command . anybody having window script for doing this please share it with me.
    Your help is higly appreciated
    Thanks
    Ottran

    It could be that the wsdl file is not found if you are invoking this command for a wsdl which is locally existing
    Could you send the command and the exception msgs that you are getting
    Regards
    Mari

  • How do I resolve the error cannot load XML! Help is not available?

    I am using InDesign CC 2014 in Windows 8.1.  In using the Object Model Viewer to load the Object Model for my version of InDesign I get this error.  What is the help that is being referred to?

    Please try the mentioned steps:
    1. Navigate to Applications/Utilities/Adobe Installer and look for CC desktop, if present run the uninstaller to uninstall it.
    2. Navigate to Applications/Utilities and look for Adobe Application Manager folder and Creative cloud folder. If present move to trash and empty it.
    3. Navigate to Library/Application Support/Adobe/OOBE and rename to OOBE.old
    4. Download CC desktop from: https://creative.adobe.com/products/creative-cloud and try to install again.
    Other references are:
    Troubleshoot CCM Applet installation and download
    Re: Adobe application manager fails to update/install
    Regards
    Rajshree

Maybe you are looking for