ASSERTION FAILED DUMP
Hi All,
Some of the users using my appliation is getting the below error.
Short text
The ASSERT condition was violated.
What happened?
In the running application program, the ASSERT statement recognized a
situation that should not have occurred.
The runtime error was triggered for one of these reasons:
- For the checkpoint group specified with the ASSERT statement, the
activation mode is set to "abort".
- Via a system variant, the activation mode is globally set to "abort"
for checkpoint groups in this system.
- The activation mode is set to "abort" on program level.
- The ASSERT statement is not assigned to any checkpoint group.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
The application is working fine for many other users. Only few are facing this issue. They are getting this dump when they are trying to submit the data. What could be the issue?
I checked with the Authorization roles assigned for them. Everything is fine. Is there any special authorization needed to update the table?
Answered.
Assertion Failed Error
Similar Messages
-
Hello,
I am displaying a ALV report as POP-UP . Its developed based on OOPS ( gr_table->Display).
The ALV displaying the output perfectly when the records are less. For example, the ALV pop-up able to show the 50 records perfectly . If the records are more than 50 (example 500), then i have to scroll down to see the records from 51 to 500. When the records are high , the Alv trying to display the output.. but in a second, its throwing the dump((ASSERTION_FAILED)). Few times, its able to display the data, when i am trying to scroll down to see the below records..its throwing the dump (ASSERTION_FAILED). I tried with all possibilities but no luck. And no idea about ASSERTION FAILED DUMP.
Kindly help.
Regards,
VenkatHello Both,
Thanks for the reply. Please find the error details
The ASSERT condition was violated.
Error analysis
The following checkpoint group was used: "No checkpoint group specified"
If in the ASSERT statement the addition FIELDS was used, you can find
the content of the first 8 specified fields in the following overview:
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"ASSERTION_FAILED" " "
"CL_DATAPTABLECACHE============CP" or "CL_DATAPTABLECACHE============CM00P"
"TRANSMIT_PACKET"
Any clue. Please.
Venkat -
Assertion Failed - Dump when clicking on the links from Portal for WD Comp
Hi,
We have a WD Component which is integrated to the Portal . When we click on the link in the Portal for the first 2 times, the selection screen is shown correctly ( when debugged, the program stops in WDDOINIT method before the sel.screen is shown).
When we click on the link for the third or fourth time with no time gap, it shows a dump. This is the dump I am getting.
Runtime Errors ASSERTION_FAILED
Date and Time 01/06/2011 10:13:58
Short text
The ASSERT condition was violated.
What happened?
In the running application program, the ASSERT statement recognized a
situation that should not have occurred.
The runtime error was triggered for one of these reasons:
- For the checkpoint group specified with the ASSERT statement, the
activation mode is set to "abort".
- Via a system variant, the activation mode is globally set to "abort"
for checkpoint groups in this system.
- The activation mode is set to "abort" on program level.
- The ASSERT statement is not assigned to any checkpoint group.
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"ASSERTION_FAILED" " "
"CL_NW7_VIEW_ELEMENT_ADAPTER===CP" or "CL_NW7_VIEW_ELEMENT_ADAPTER===CM004"
"DISPATCH_NW7_EVENT"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
User and Transaction
Client.............. 010
User................ "STECURRY"
Language Key........ "E"
Transaction......... " "
Transactions ID..... "4D250E9ADDFB00BDE10080000A041004"
Program............. "CL_NW7_VIEW_ELEMENT_ADAPTER===CP"
Screen.............. "SAPMHTTP 0010"
Screen Line......... 2
Information on Caller ofr "HTTPS" Connection:
Plug-in Type.......... "HTTPS"
Caller IP............. "10.6.4.220"
Caller Port........... 443
Universal Resource Id. "/sap/bc/webdynpro/sap/ZEM_INV_APP_ASSIGNMENTS/"
Information on where terminated
Termination occurred in the ABAP program "CL_NW7_VIEW_ELEMENT_ADAPTER===CP" -
in "DISPATCH_NW7_EVENT".
The main program was "SAPMHTTP ".
In the source code you have the termination point in line 5
of the (Include) program "CL_NW7_VIEW_ELEMENT_ADAPTER===CM004".
Source Code Extract
Line
SourceCde
1
METHOD dispatch_nw7_event.
2
DATA: l_event_handler TYPE REF TO if_wdr_nw7_event_handler.
3
4
l_event_handler = get_nw7_event_handler( i_event_handler_id ).
>>>>>
assert l_event_handler is not initial.
6
7
" View-based Delta Rendering: tracking of client events
8
raise event on_nw7_handle_event
9
exporting
10
event_handler = l_event_handler
11
event_name = i_event_name.
12
13
14
l_event_handler->handle_event(
15
i_event_name = i_event_name
16
i_event_parameters = i_event_parameters
17
i_update_data = i_update_data
18
i_event_queue = i_event_queue ).
19
ENDMETHOD.
- I have cut the dump to make it short and clear.
One of my colleague ran a HTTP watch trace and I am attaching it as well.
<body> <table cellpadding="0" cellspacing="0" border="0" width="100%"> <tr> <td> <h1> Error when processing your request </h1> <br> <h2> What has happened? </h2> <p> The URL https://uswasspq.deloitte.com:/sap/bc/webdynpro/sap/ZEM_INV_APPROVER_MAIN//ucfLOADING was not called due to an error. </p> </td> </tr> <tr> <td> </td> </tr> <tr> <td class="emphasize"> <strong> Note </strong> <br> <ul> <li> The following error text was processed in the system SPQ : <b> User session (HTTP/SMTP/..) closed after timeout </b> </li> </ul> <ul> <li> The error occurred on the application server usuxc204_SPQ_01 and in the work process 1 . </li> </ul> <ul> <li> The termination type was: ERROR_MESSAGE_STATE </li> </ul> <ul> <li> The ABAP call stack was: <br> Method: PREPROCESS_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP<BR>Method: IF_HTTP_EXTENSIONHANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP<BR>Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP<BR>Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME<BR>Module: %_HTTP_START of program SAPMHTTP<BR> </li> </ul> </td> </tr> <tr> <td> </td> </tr> <tr> <td> <p> </p> <h2> What can I do? </h2> <ul> <li> If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system SPQ in transaction ST22. </li> </ul> <ul> <li> If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server usuxc204_SPQ_01 in transaction SM21. </li> </ul> <ul> <li> If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 1 in transaction ST11 on the application server usuxc204_SPQ_01 . In some situations, you may also need to analyze the trace files of other work processes. </li> </ul> <ul> <li> If you do not yet have a user ID, contact your system administrator. </li> </ul> <br/> <p class="note"> Error code: ICF-IE-https -c: 010 -u: STHUGHES -l: E -s: SPQ -i: usuxc204_SPQ_01 -w: 1 -d: 20110208 -t: 131808 -v: ERROR_MESSAGE_STATE -e: User session (HTTP/SMTP/..) closed after timeout </p> <br/> <p> HTTP 500 - Internal Server Error <br/> <p> Your SAP Internet Communication Framework Team </p> </td> </tr> </table> </body> </html>
After this error a URL is called form the WebDynpro to the following html page.
https://uswasspq.deloitte.com/sap/bc/webdynpro/sap/zem_inv_approver_main/dps_Error_Page.html ( this is the friendly message we have put so that the user does not see the dump on his screen.
I tried invalidating the nodes in the WDDOEXIT at the view level but it did not help. This is a show stopper for the project to go live.
Thanks,
Guru.Hi Guru,
It is not readable the way you posted and that might be the reason that you do not get reactions.
Can you please confirm the following.
1. Is this problem occurs with out portal when you run the application standalone in SAP GUI.
2. What is going on wddoinit method or wddomodify method, any resource handling there ? -
Assertion Failed - Transformation
Hi All,
We have a transformation(ODS -> ODS) which throws Assertion Failed DUMP when we try to open it in change mode.
We have deleted the entry in RSTRANRULE table only corresponding to this transformation ID which had groupID = 00 as mentioned in SAP Note 998730. But no luck, we are still getting same error.
Should we have to delete all entries in the RSTRANRULE table with groupID = 00?
Can anyone please explain? Any help will be appreciated.
Note: We cannot delete and re-create transformation since it is a complex one.
regards,
Pruthvi RHi All,
Thanks for replying.
@Kathleen & @Meiyalagan,
The some of the notes you have suggested are not directly relation to the issue i am facing. Should i have to apply all of them to resolve the issue? please reply.
@Murali,
Should i have to delete thew rows which satisfies all the conditions together or delete the rows even if it satisfies any one of the condition?
Should i have to delete only entries related to the corrupted transformation ID or for all transformation ID?
please replay.
note: We are on SP13.
regards,
Pruthvi R -
Hi,
I have a JNI native library that calls a custom C++ shared library with a number of number of dependencies. At runtime, in the process of loading the custom C++ library, I got the folloing message.
Assertion failed: 0, file ../lnk/exthrow.cc, line 425
Abort (core dumped)
If I did mdb on core dump, the following is the result.
mdb java.29922
mdb: core file data for mapping at ffb7a000 not saved: Bad address
Loading modules: [ libc.so.1 libuutil.so.1 ld.so.1 ]
$Cffbf7c90 libc.so.1`_lwp_kill+8(6, 0, ff2f2e10, ff2a8bd0, ffffffff, 6)
ffbf7cf0 libc.so.1`abort+0x110(ffbf7de0, 1, 0, ad314, ff2f12d8, 0)
ffbf7d80 libc.so.1`_assert+0x64(ff1d9358, ff1d935a, 1a9, ff1ea810, ad030, ff1d418c)
ffbf7fe0 libCrun.so.1`__1cG__CrunMex_rethrow_q6F_v_+0xf0(0, fffb, 0, 14c14, 2, 0)
ffbf8040 libtssclt.so.3`__1cDstdNbasic_istream4Ccn0ALchar_traits4Cc___2t6Mn0AIios_baseJEmptyCtor__v_+0xb8(eef09710, 0,
eef0df94, eef0a088, eef09730, eef09748)
ffbf80a0 libtssclt.so.3`__SLIP.INIT_A+0x20(0, ff2f3700, acb18, ff2bb774, f0bd4840, f0bd4880)
ffbf8100 libtssclt.so.3`__1cU__STATIC_CONSTRUCTOR6F_v_+4(ee774a48, ff2f3700, acb18, ff1d6e50, f0bd3b40, f0bd3b80)
ffbf8160 libtssclt.so.3`_init+0x110(ff3f40fc, ff3f5a50, 2b414, 0, ff3f4910, 821)
ffbf81c0 ld.so.1`call_init+0x16c(c10081, 1, fe9d0f60, ee7c5eb4, ff3f4910, ffdfffff)
ffbf8228 ld.so.1`dlmopen_intn+0x164(ff3f40fc, 10000, c01, 24, 3b, ff161f30)
ffbf8288 ld.so.1`dlmopen_check+0x160(ff3f40fc, 10c5c8, c01, ff3914f8, ffbf834c, 0)
ffbf82e8 ld.so.1`dlopen+0x30(10c5c8, 1, 1, ff185fac, 57c0, ff185fa8)
ffbf8350 libjvm.so`__1cCosIdll_load6Fpkcpci_pv_+0x20(10c5c8, ffbf8858, 400, 0, 12eed4, 5400)
ffbf83f0 libjvm.so`JVM_LoadLibrary+0x15c(10c5c8, 64fc, 38810, ff18696c, ff185fac, 2)
ffbf8c58 libjava.so`Java_java_lang_ClassLoader_00024NativeLibrary_load+0xe8(388cc, ffbf8f2c, ffbf8f28, 0, 10c5c8, 0)
ffbf8dc0 0xf900bc20(11, ffbf8f2c, ffbf8ea8, ffffff80, 64fc, 0)
ffbf8e40 0xf900bbc4(f0c303c0, b6, 0, 8, 1ffc, ffbf8ec0)
ffbf8ec0 0xf9005764(f0c30080, b8, f0c09478, f9014760, f0c374a8, ffbf8f90)
ffbf8f58 0xf90057a8(0, b8, ffbf911c, f9014a20, 110, ffbf9028)
ffbf9018 0xf9005764(f0c08de8, b6, ffbf919c, f9014a68, 57c0, ffbf90c0)
ffbf90b8 0xf9005764(339b8, 0, 64fc, f9014760, ff185fac, ffbf9140)
ffbf9140 0xf9005764(c000, 2, 4c00, f9014a70, ff17fca0, ffbf91b8)
ffbf91b8 0xf9000218(ffbf92a0, ffbf9380, a, f4d5f2f8, f900a7e0, ffbf9390)
ffbf9218 libjvm.so`__1cJJavaCallsLcall_helper6FpnJJavaValue_pnMmethodHandle_pnRJavaCallArguments_pnGThread__v_+0x5b8(
ffbf9378, 38810, ffbf938c, ffbf92b0, 38eb8, 0)
ffbf92e0 libjvm.so`__1cNinstanceKlassPinitialize_impl6FnTinstanceKlassHandle_pnGThread__v_+0x68c(ffbf9524, 38810, f4d5f330,
391cc, 38eb8, 38eb4)
ffbf94c0 libjvm.so`__1cNinstanceKlassKinitialize6MpnGThread__v_+0x80(38e20, 38810, fecd7a8c, f4d5f330, 38810, ff181fbc)
ffbf9540 libjvm.so`__1cbCfind_class_from_class_loader6FpnHJNIEnv__nMsymbolHandle_CnGHandle_3CpnGThread__pnH_jclass__+0xd8(
388cc, 1, 1, 38e18, f4d5f330, 1)
ffbf95b0 libjvm.so`jni_FindClass+0x720(388cc, 0, 0, ff18696c, 391cc, 0)
ffbf9640 main+0xe3c(6, 388cc, ff182ba0, 39348, 0, 1)
ffbf9ed0 _start+0x108(0, 0, 0, 0, 0, 0)
Any help/assistance on this issue would be highly appriciated.
Thanks and Regards
SomeshI ran into this exact same problem (on Solaris, JVM 1.4.1). Although I don't know the exact cause, I can tell you what I did to fix it..
Of course, this happens when you try to load a native library (a .so in this case). I ldd'd that .so, and found that it in turn was linked to two other libraries in my control, and some other OS libraries.
When I statically linked either one of my libraries, such that only one of the libraries under my control was still linked dynamically, leaving the OS libaries untouched, then the problem went away. Note that it didn't matter which one I linked statically- as long as one (or both) were static there was no problem.
My guess was that there were some sort of cyclic dependencies with these libraries, but right now I'm happy enough that it works, so I'm not going to try and pursue this further.. -
Assert Failed: Flashfarm
I am having a problem on intel macs with a crash after an
assert is tripped
Assert failed:
/flashfarm/depot/main/player/branches/FlashPlayer/FlashPlayer8_MacIntel_Integrated/platfo rm/mac/plugins/../mpi_player.cpp:5445
this is with 8.0r27 (is there a later one for intel mac)
my code dumps har after this any word on why this assert
fails?Yes, there is now a Flash Player 9 Beta for Intel-based
Macintosh computers:
http://www.adobe.com/products/flashplayer/public_beta/ -
Experts,
I am performing Homogeneous System copy using backup/restore method.I have taken QA system backup ie dump files and trying to build on Sandbox system for testing purpose.Everything went fine and was able to load the dump but stuck at one of the point and throwing me error
ERROR [cinstallercallbackimpl.cpp:228]
CJS-00030 Assertion failed: Execution of SQL script reports an unexpected error.
When I checked the sapinst_dev log I found the below error but not able to fix it and not aware to proceed further
1> use SID
1> EXEC sp_changedbowner sapsa
Msg 17362, Level 16, State 1:
Server 'SID', Procedure 'sp_changedbowner', Line 181:
The proposed new db owner already is a user in the database or owns the database.
(return status = 1)
I am sure these may be small changes that have to be made by changing the db owner and Im not exactly sure how to perform it.
Note:I am Using the Windows environment with Sybase ase database and SWPM tool to perform.
Appreciate your suggestions
ThanksI fixed the issue ..by changing the owner sapsa.Bingo !!!!
-
'Assertion failed' in metattach
Hi!
Yesterday I've started to receive the following error while running metattach command to expand softpartition:
# metattach d101 100M
Assertion failed: mp->un_ext.un_poff != 0, file ../common/meta_sp.c, line 3339
metattach: Abort
Abort (core dumped)
# pstack core
core 'core' of 9612: metattach d101 100M
ff1205c8 _kill (52, ffbff4f8, 52, 7efefeff, 81010100, ff00) + 8
ff0b6ff0 _assert (ff2248b8, ff2248d4, d0b, 4, 27d88, 0) + 54
ff1f8ca4 meta_sp_fillextarray (263fea, 0, 11b, 0, 0, ffbff978) + 198
ff1f8e68 meta_sp_updateunit (24798, 24c90, 27c28, 0, 32000, 1) + cc
ff1fadb8 meta_sp_attach (22f00, 4, 1, 5, 0, 0) + 3bc
00011798 ???????? (ffbff9ac, 24798, 3, ffbffa14, 5, ffbff978)
000124d4 main (3, ffbffa14, ffbffa24, 22c00, 0, 0) + 698
00011644 _start (0, 0, 0, 0, 0, 0) + 108
# uname -a
SunOS men-orafunc-03 5.9 Generic_118558-26 sun4u sparc SUNW,Sun-Fire-V240
The softpartition itself is placed on a top of 2-way mirror and each submirror consists of two concatenated partirions. Other softpartitions laying on this mirror are expanded withot an error. About a week and a half ago I've applied recent Recommended Patch Cluster.No, /etc/system contains no UFS-related or SVM-related customizations except required to boot from metadevice:
set semsys:seminfo_semmni=100
set semsys:seminfo_semmns=8192
set semsys:seminfo_semmsl=256
set shmsys:shminfo_shmmax=8589934592
set shmsys:shminfo_shmmin=1
set shmsys:shminfo_shmmni=100
set shmsys:shminfo_shmseg=10
* Begin MDD root info (do not edit)
forceload: misc/md_trans
forceload: misc/md_raid
forceload: misc/md_hotspares
forceload: misc/md_sp
forceload: misc/md_stripe
forceload: misc/md_mirror
forceload: drv/pcisch
forceload: drv/glm
forceload: drv/sd
rootdev:/pseudo/md@0:0,10,blk
* End MDD root info (do not edit)
* Start of HPfcraid edits. DO NOT DELETE THIS LINE
forceload: drv/clone
forceload: drv/ssd
set maxphys=8388608
set sd:sd_max_throttle=32
set sd:sd_io_time=180
set ssd:ssd_max_throttle=32
set ssd:ssd_io_time=180
* End of HPfcraid edits. DO NOT DELETE THIS LINE -
After installing the latest update to Lightroom 5, I started getting this message when I started Lightroom:
Adobe Photoshop Lightroom 5[4407]: Oops! An untagged string (assertion failed!) got thrown far enough that we display it to the user. This shouldn't happen.
From what I've found through searches, plugins may be related to the problem.
The problem I'm having here is the lack of any information - no crash log, no reference to what caused this - in any log file. I've taken the most recently installed or updated pugins and moved them elsewhere to test and am still getting this message.
I assume that when I see "This shouldn't happen" as a message from the software, that it's a significant warning. What can go wrong / is going wrong as a result of the related problem? Is my data in danger?
All help gratefully appreciated.Off.line wrote:
Thanks for your thoughts, Rob.
You're welcome .
Off.line wrote:
The few times I wrote something like this, I dumped as much data as I could somewhere to facilitate the debugging process and it's a bit dissappointing that there seems to be no such output.
No such output enabled for users. I'm sure the developers have some way of debugging..
Off.line wrote:
I wonder what the output of the -tracebacks switch would be.
It shows the error in context (I've done it before, but it was a long time ago) - what Lr was doing when error occurred. For example, if plugin was executing, it would show that.
Off.line wrote:
I'm not familiar with the .agprefs file
It's where Lr stores preferences - see your presets folder (location is accessible via a button in Lr preferences dialog box: "Show Lightroom Presets Folder..."). Look in 'Preferences' subfolder. It's the source of some aberrant behavior sometimes..
Off.line wrote:
my catalog is backed up in two places, on two separate devices. But if there's corruption within the catalog, then the backups are bad, too.
If you've been using Lightroom's built-in catalog backup feature, then it creates a new backup each time, so old backups, if not yet deleted, may not have same problem as newer backups. But I think we're getting ahead of ourselves now.
Rob -
Assertion failed: t- numPointers == 0, ....
I develop software on true64 Unix 5.0 and use JDK1.3.1 beta 2 (Fast VM) , I found exception like this
Assertion failed: t->numPointers == 0, file ../../../src/share/native/sun/awt/font/t2k/tsimem.c, line 92
exception system: exiting due to multiple internal errors:
exception dispatch or unwind stuck in infinite loop
exception dispatch or unwind stuck in infinite loop
Had anyone ever met this exception before , what is it wrong , and how can i solve it ?Hi -
We also came across this problem. It seems to be related to using anti aliased text in a drawString() call. Interestingly it happens on the second call using a particular font.
Test case code is pasted below, which will crash the JVM on the second run through the main loop - i.e. the second time iterating through all the fonts.
This code was cannibalised from another example posted here a while ago.
Chris Davey
===========
import java.awt.*;
import java.awt.font.*;
import java.awt.image.*;
class Test {
public static void main(String[] argv) {
FontMetrics fm = null;
String strings [] ={""," "," ","a","test string"};
int iaBITypes [] = {BufferedImage.TYPE_3BYTE_BGR ,BufferedImage.TYPE_4BYTE_ABGR ,
BufferedImage.TYPE_4BYTE_ABGR_PRE ,BufferedImage.TYPE_BYTE_BINARY ,
BufferedImage.TYPE_BYTE_GRAY ,BufferedImage.TYPE_BYTE_INDEXED ,
BufferedImage.TYPE_INT_ARGB ,BufferedImage.TYPE_INT_ARGB_PRE ,
BufferedImage.TYPE_INT_BGR ,BufferedImage.TYPE_INT_RGB ,
BufferedImage.TYPE_USHORT_555_RGB ,BufferedImage.TYPE_USHORT_565_RGB ,
BufferedImage.TYPE_USHORT_GRAY };
Toolkit t = Toolkit.getDefaultToolkit();
System.out.println("hi");
for (int idx = 0; idx < 100; idx++){
Font fonts [] = GraphicsEnvironment.getLocalGraphicsEnvironment().getAllFonts();
for (int ff=0;ff<fonts.length;ff++) { // Try all fonts
for (int iBIType = 0; iBIType < iaBITypes.length; iBIType++){
BufferedImage bi = new BufferedImage(1000,1000,iaBITypes[iBIType]);
Graphics2D g= (Graphics2D) bi.getGraphics();
//FontRenderContext frc = g.getFontRenderContext();
//XXX Problem Here - if
//2nd Param (anti - aliasing ) is TRUE, then This
//will crash on True 64 Unix - with either Sun or
//Compaq JVM, on 2nd pass through
FontRenderContext frc2 = new FontRenderContext(null,true,false);
//TextLayout tl = new TextLayout("test-string",fonts[ff],frc);
TextLayout tl2 = new TextLayout("test-string",fonts[ff],frc2);
g.setFont(fonts[ff]);
for (float a = -1000; a < 2000; a+=200)
g.drawString("test",a,a);
System.out.println("dumping threads: " );
Thread ath[] = new Thread[512];
Thread.currentThread().enumerate(ath);
for (int i=0; i < ath.length; i++){
if (ath[i] != null)
System.out.println("\tThread: " + i + " " + ath);
Keywords: Tru64 tsimem.c assert true64 crash -
Hello,
When calling lua_error(L) (pushing a Lua error in an embedded lua interpreter in my CVI code), I have been encountering a complete crash. Not only does my code stop running, but the full CVI 9.1.1 IDE crashes without even an error message. When I look in the windows xp event log I find the following:
The description for Event ID ( 0 ) in Source ( CVI ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: [16:45:30.768] [FATAL] [LW_UAE_Handler] [..\jeff\i386\except.c:161] Assertion failed: 0.
When I recompile my project with visual studio, the identical code does not crash or cause any problems. Any insite on this problem would be greatly appreciated.
thanks,
Alex CorwinHello Alex,
Could you try to generate a crash dump? Also, here is a community example of code using an embedded interpreter LUA in a LabWindows/CVI Project.
Regards,
Jeff L.
Applications Engineer | National Instruments -
SWPM - System Copy - Assertion Failed Unable to load database
Hello again,
(already the next question form me, sorry for this
I am executing a sysetm copy (DB-refresh) on ASE using SWPM.
However, in "Configure Components" step I get the error: Assertion failed. Unable to load database <SID of Target Sysetm>.
Where else can I check for errors?
I think it is still something on which I already worked (with other thread).
In sapinst_dev.log I found this
TRACE 2015-03-25 11:05:00.320
SAPInst calls the LogInquirer. The output of the LogInquirer can be found in file sapinst_loginquirer.log.
TRACE 2015-03-25 11:05:06.122 [iaxxgenimp.cpp:638]
CGuiEngineImp::showMessageBox()
<html> <head> </head> <body> <p> An error occurred while processing option <i>SAP Enhancement Package 1 for SAP N
etWeaver 7.3 > SAP ASE > System Copy > Target System > Standard System > Based on AS ABAP > Database Refresh or M
ove( Last error reported by the step: Assertion failed: Unable to load database <SID>.)</i>. You can now: </p> <ul>
<li> Choose <i>Retry</i><br>to repeat the current step. </li> <li> Choose <i>Log Files</i><br>to get more inform
ation about the error. </li> <li> Stop the option and continue later. </li> </ul> <p> Log files are written to /t
mp/sapinst_instdir/NW731/SYB/COPY/SYSTEM/STD/AS-ABAP/REF. </p> </body></html>
TRACE 2015-03-25 11:05:06.124 [iaxxgenimp.cpp:1031]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
In sapinst.log I found this:
ERROR 2015-03-25 11:04:59.573
FCO-00011 The step syb_step_setup_preload with step key |NW_ABAP_DB_DBRefresh|ind|ind|ind|ind|0|0|NW_ABAP_DB|ind
|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|createdbandload|0|NW_CreateDB|ind|ind|ind|ind|createdb|0|NW_S
YB_DB|ind|ind|ind|ind|SYB_DB_CONTEXT|0|syb_step_setup_preload was executed with status ERROR ( Last error reporte
d by the step: Assertion failed: Unable to load database <SID>.).
INFO 2015-03-25 11:04:59.772
Creating file /tmp/sapinst_instdir/NW731/SYB/COPY/SYSTEM/STD/AS-ABAP/REF/__instana_tmp.xml.
INFO 2015-03-25 11:05:00.307
Removed file /tmp/sapinst_instdir/NW731/SYB/COPY/SYSTEM/STD/AS-ABAP/REF/instslana.xml.
INFO 2015-03-25 11:05:00.308
Creating file /tmp/sapinst_instdir/NW731/SYB/COPY/SYSTEM/STD/AS-ABAP/REF/instslana.xml.Hello Kiran,
I did a few tests again yesterday, and it was really a stupid mistake from myside.
The error message did mean, that there wasn't enough space.
It isn't the authority issue, it was a leak of space.
FYI, the complete DB-Size of Source System is required - NOT JUST RESERVED SPACE!!!
Thx for help and sorry for stealing your time :O -
Internal error: assertion failed - still won't work in LR4
When I try to export an image from LR4 I get the "internal error: assertion failed" error. I'm running Lion 10.7.3 on a MacBook.
I started by reading the thread at:
Re: "internal error: assertion failed" when exporting via LR4
tinaTS offered what she thought was the correct fix but her suggestion didn't apply to my situation. She suggested moving user presets but I don't have any to move.
I also tried the basic “repair permissions” and Lion restart with no luck.
Kirk Marcus suggested removing the com.adobe.Lightroom4.plist from my library. This didn't help, still getting the error.
Then I removed these files as well:
com.adobe.Lightroom3.plist
com.adobe.Lightroom2.plist
com.adobe.Lightroom3.LSSharedFileList.plist
com.adobe.Lightroom3.plist.lockfile
None of that helped.
I tried removing all files that began with com.adobe.Lightroom and then creating a new library and just importing one picture but I still get the same "internal error" VERY FRUSTRATING.
Obviously, the program is worthless to me if I can't export images.
Additional suggestions would be appreciated. I see that lots of people on the internet are having this problem but none of the suggestions I've found so far have been of any help.Thanks for the suggestions. I tried removing the com.adobe.Lightroom4.plist. This didn't help, still getting the error.
Then I removed these files as well:
com.adobe.Lightroom3.plist
com.adobe.Lightroom2.plist
com.adobe.Lightroom3.LSSharedFileList.plist
com.adobe.Lightroom3.plist.lockfile
None of that helped.
I tried creating a new library and just importing one picture but I still get the same "internal error" VERY FRUSTRATING. -
"Assertion failed" error when executing a simple UCI program
I am using a simple UCI program (tt1.c) with Xmath version 7.0.1 on Sloaris 2.8 that performs the followings:
- Start Xmath701
- Sleep 10 Seconds
- Load a sysbuild model
- Stop Xmath
I am calling the uci executable using the following command:
> /usr/local/apps/matrixx-7.0.1/bin/xmath -call tt1 &
In this way everything works fine and the following printouts from the program are produced.
--------- uci printout ----------
## Starting Xmath 701
## sleep 10 seconds
## load "case_h_cs_ds.xmd";
## Stopping Xmath 701
All the processes (tt1, XMATH, xmath_mon, and sysbld) terminate correctly.
The problem occurs if the 10 second wait after starting xmath is omitted:
- Start Xmath701
- Load a sysbuild model
- Stop Xmath
This results to the following printouts:
--------- uci printout ----------
## Starting Xmath 701
## load "case_h_cs_ds.xmd";
Assertion failed: file "/vob1/xm/ipc/ipc.cxx", line 420 errno 0.
Note that the last line is not produced by the uci program and the tt1 did not
finish (the printout before stopping xmath "## Stopping Xmath 701" was
not produced).
A call to the unix "ps -ef" utility shows that none of the related process has been terminated:
fs085312 27631 20243 0 10:45:29 pts/27 0:00 tt1
fs085312 27643 1 0 10:45:30 ? 0:00 /usr/local/apps/matrixx-7.0.1/solaris_mx_70.1/xmath/bin/xmath_mon /usr/local/app
fs085312 27641 27631 0 10:45:30 ? 0:01 /usr/local/apps/matrixx-7.0.1/solaris_mx_70.1/xmath/bin/XMATH 142606339, 0x8800
fs085312 25473 25446 0 10:45:33 ? 0:01 sysbld ++ 19 4 7 6 5 8 9 0 25446 ++
The questions are as follows:
1- What is "Assertion failed: file "/vob1/xm/ipc/ipc.cxx", line 420 errno 0" and why is that produced?
2- Should the UCI program waits for end of sysbld initialization before issuing commands?
3- If the answer to the above question is yes, is there a way to check the termination of sysbld initialization?
Thanks in advance for you help.
Attachments:
tt1.c 1 KBI tracked down the problem and it is a race condition between the many processes being started up. A smaller delay should also solve the problem. Or, maybe do something else before the first 'load'. The 'load' command tries to launch systembuild and causes the race condition.
-
Assert Failer Error while installing the Trial Version
Hi,
I am getting the following error while installing the trail version. any help is greatly appreciated. I am also not able to find XCMDOUT.LOG.
ERROR 2005-01-27 11:59:43 [iaxabactorext.cpp:420]
CIaSdbActorExt::sdbSessionExecute_impl
MDB-07001 No action defined for actor.
ERROR 2005-01-27 11:59:43 [iaxxinscbk.cpp:223]
abortInstallation
CJS-00081 Assertion failed: in
function sdb_inst_enum() {
var actn = "SDB_INST_ENUM";
var call_arr = sdb_action_with_info(actn, "75");
ASSERT(arguments.callee, call_arr != undefined, "ERROR WHILE EXECUTING dbmcli COMMAND! CHECK THE XCMDOUT.LOG FILE");
ASSERT(arguments.callee, call_arr[0] != "false", "ERROR WHILE EXECUTING dbmcli COMMAND! CHECK THE XCMDOUT.LOG FILE");
var e_arr;
e_arr = new Array();
for (var a_cnt = 1; a_cnt < call_arr.length; a_cnt++) {
e_arr.push(call_arr[a_cnt]);
return e_arr;
ERROR WHILE EXECUTING dbmcli COMMAND! CHECK THE XCMDOUT.LOG FILEHi Lakshmi,
Were you ever able to resolve the problem?
-wael
Maybe you are looking for
-
Error when Starting Default Admin Server
I have Installed WebLogic6.0 Beta Trial Version on Windows89. When I Start the Default Admin Server It Starts Configuring but at last terminates with Error :- Unable to Load Performance Pack Error. Please Help No Info available on bea site. Manoj
-
How to disable some "columns to display"?
Hello! I have one management pack (it's monitor some our network devices), which was written by contractors for our company. This mp have many unnecessary columns in it's view. I deleted some of these <ColumnInfo> from mp (.xml file). Then I import
-
Using variants to set/get container variables?
I am trying to determine if there is a way to retreive TestStand container variables into CVI using variants. The goal is to not have to get each member of the container separately. I am not seeing a way to do this - if it can please done can you p
-
I cannot find ITunes on my PC. Can anyone help?
-
Wlc 2504 7.4.100 to 7.4.110 upgrade fails
Hello, I've got a strange behaviour while upgrading my 2504 wlc from 7.4.100 to 7.4.110. I used the gui procedure to transfer the updated aes file to the wlc. The procedure started fine, finished downloading, and then the wlc got completely stuck on