Assertion failed in Survey mode

I have to images up on primary monitor in Survey mode...
A rollover on the X in the lower right corner of the left image cause a Assertion failure
you can't see the mouse pointer because it was involved in the screen grab.. but the error pops up on rolling over the X.
LR keeps working however.
Mac OS 10.6.8 / Lighroom 4.0 Beta 800002

Hi Srikanth,
Goto table RSTRANRULE
Give your trasnformation tech id:
display data
there select you rule and where rule type as null or space and delete that rule.
now try to activate it
then it will work
Regards
Edited by: Srinivas Gogineni on Jan 27, 2009 10:12 PM

Similar Messages

Uttsc assertion failed

Dear all,
I'm running Solaris 10.4, SRSS 4.0 and Sun Ray Connector 1.1; until I tried using the Sun Ray Connector, everything was working very well and I was very happy with it all.
If I run:
$ /opt/SUNWuttsc/bin/uttsc <a windows server>
I have the following error returned to me:
Assertion failed: 0 && "Invalid mode value", file admin.c, line 354
/opt/SUNWuttsc.bin/utsc[137]: 13753 Abort
What am I doing wrong? Any help would be greatly appreciated; my googles have yet to turn up anything that resolves this.
Thanks in advance

An assertion failure means that the program has encountered a situation that should never occur and that the program logic can not handle in any sensible way. The program has deliberately crashed itself rather than taking the risk of proceeding and perhaps causing damage to your data. The failure might mean that there is a bug in the program or it might mean that the RDP traffic stream has been corrupted, but in any case it's very unlikely that you can do anything to fix the problem. You should open a support call with Sun and give them as many details as you can about your environment and what was happening at the time this failure happened. If the program left a file named "core" behind then send that to Sun too. It contains a snapshot of the memory of the process at the time it failed.
It's possible that you could work around (hide, not fix) the problem by changing some of the RDP or Sun Ray settings that are being used for this session, but I don't know enough about the Windows Connector to make any suggestions. If you decide to try this then please make a note of what the settings are now, before you change anything, so that you can describe your current configuration correctly to Sun. This will give them the maximum chance of being able to reproduce and then fix the real problem.

Assertion Failed with switching between editing mode of table view

I'm writing an app that can switching between edit mode of a table view
- in edit mode a new line appear at the bottom
- out edit mode this line will disappear
I used insertRowsAtIndexPath and deleteRowsAtIndexPath to achieve this effect, but then during testing, if I switching edit mode too frequently, I got an assertion failure
Assertion failed: (cache->size >= g->size), function evictglyph_entry_fromcache, file Fonts/CGFontCache.c, line 836.
It seems someone has also encountered this before, but I have found no solution yet. Anyone know how to fix it or work around it?

Hi,
Please check if you have entries on the table RSTRANRULE with:
GROUPID   = 'space'
GROUPTYPE = 'space' or 'S'
REF_RULE <> 'space'
If there are inconsistent entries in the RSTRANRULE table such as:
       TRANID         *
       OBJVERS        *
       RULEID         *
       SEQNR          *
       GROUPID        00
       GROUPTYPE      space or GROUPTYPE    'S'
       RULETYPE       space
       REF RULE       *
Delete these entries from the table.
Activate the affected transformations.
More info check the note 998730.
9987300-ASSERTION_FAILED when calling or changing groups, group 00.
Thanks,
Walter Oliveira.

ISR_PROCESS_EVENT assert fails

I'm trying to call ISR_PROCESS_EVENT as an RFC, passing in the data for a form, and trying to validate the fields. To do this i first call ISR_PROCESS_EVENT with mode "CREATE" and get back the fields I need. So far so good.
Later, I call the same RFC, this time passing in parameters mode = "CREATE" and event = "CHECK". When calling the RFC this second time i get an assert failed error in the code pasted below.
Is it a requirement that the "check" variation must be called from the same abap session as the initial create call? I ask this because I've been able to make it work if i write a custom function module which calls first ISR_PROCESS_EVENT CREATE with event space and then immediately call ISR_PROCESS_EVENT CREATE CHECK int he same RFC, but with the same input tables it fails if called separately. My only working assumption at this point is that it relies on the function to be initialized with CREATE first in the same session, and since I'm doing this via RFC call in two steps, this isn't the case.
Please help!
The "data_containers" are initial in class CL_IM_HRASR00ISR=>GET_PROCESS_OBJECT_HANDLER
Get all data containers from all scenarios
IF data_containers IS REQUESTED.
    CALL METHOD process_object_handler->get_all_data_containers
      EXPORTING
        message_handler = message_handler
      IMPORTING
        data_containers = data_containers_xml
        is_ok           = is_ok.
    IF is_ok EQ false.
      EXIT.
    ENDIF.
    LOOP AT data_containers_xml INTO data_container_xml.
    Create a new data container if XML is not empty
    (This happens if the BAdI is called from the glue step)
      IF data_container_xml-data_container IS NOT INITIAL.
        CREATE OBJECT data_container
          EXPORTING
            xml    = data_container_xml-data_container.
        APPEND data_container TO data_containers.
        data_container_pair-data_container     = data_container.
        data_container_pair-data_container_xml = data_container_xml
        APPEND data_container_pair TO data_container_pairs.
      ENDIF.
    ENDLOOP.
    ASSERT data_containers IS NOT INITIAL.
ENDIF.
Edited by: Chris Hesse on Jun 30, 2010 8:13 PM
Edited by: Chris Hesse on Jun 30, 2010 8:14 PM

Chris,
I have resolved the issue in our system, so maybe the same resolution will work for you. The answer is in Note [1440741|http://service.sap.com/sap/support/notes/1440741]. In our system we are on HR SP 23, which contains all the code corrections from earlier versions of this Note, but does not contain the manual corrections described (essentially creating the characteristic or data type for ASYNC_BACKGROUND_SAVE). I just had to set up the characteristic as described and our form now submits just fine. I found this only by running the ABAP debugger on Method GET_EXTERNAL_DATA_VALUE of Class CL_IM_HRASR00ISR with a breakpoint set on the line "ASSERT sy-subrc EQ 0." I just stepped through until I saw the return code turn to something other than 0, and made a note that it was looking for a fieldvalue of ASYNC_BACKGROUND_SAVE. A search of Notes for this fieldvalue turned up 1440741, and that appears to have resolved the problem. The problem was not so much with the form itself, but with the asynchronous background save in the workflow step.
Hope this helps you!
--Matt

Assertion Failed - Transformation

Hi All,
We have a transformation(ODS -> ODS) which throws Assertion Failed DUMP when we try to open it in change mode.
We have deleted the entry in RSTRANRULE table only corresponding to this transformation ID which had groupID = 00 as mentioned in SAP Note 998730. But no luck, we are still getting same error.
Should we have to delete all entries in the RSTRANRULE table with groupID = 00?
Can anyone please explain? Any help will be appreciated.
Note: We cannot delete and re-create transformation since it is a complex one.
regards,
Pruthvi R

Hi All,
Thanks for replying.
@Kathleen & @Meiyalagan,
The some of the notes you have suggested are not directly relation to the issue i am facing. Should i have to apply all of them to resolve the issue? please reply.
@Murali,
Should i have to delete thew rows which satisfies all the conditions together or delete the rows even if it satisfies any one of the condition?
Should i have to delete only entries related to the corrupted transformation ID or for all transformation ID?
please replay.
note: We are on SP13.
regards,
Pruthvi R

ASSERTION FAILED DUMP

Hi All,
Some of the users using my appliation is getting the below error.
Short text
    The ASSERT condition was violated.
What happened?
    In the running application program, the ASSERT statement recognized a
    situation that should not have occurred.
    The runtime error was triggered for one of these reasons:
    - For the checkpoint group specified with the ASSERT statement, the
      activation mode is set to "abort".
    - Via a system variant, the activation mode is globally set to "abort"
      for checkpoint groups in this system.
    - The activation mode is set to "abort" on program level.
    - The ASSERT statement is not assigned to any checkpoint group.
What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
The application is working fine for many other users. Only few are facing this issue. They are getting this dump when they are trying to submit the data. What could be the issue?
I checked with the Authorization roles assigned for them. Everything is fine. Is there any special authorization needed to update the table?

Answered.
Assertion Failed Error

Assertion Failed alert when exporting in Lightroom 2 BETA

Please help! I am currently using the Lightroom 2 Beta on a Mac (OS X 10.4.11) and installed a plug-in to allow for a graphical watermark. Unfortunately, the plug-in wouldn't work properly (showed an internal error even though the plug in manager said it was working fine) and when I removed the plug in (through the plug in manager) I now cannot export at all through the export button in the Library mode. I get an alert saying "assertion failed". Technically I can still export through the file/export option but cannot get to the settings window (filenames, folders etc) to show what folder to put them into or specify the export settings.
Console report: "2008-04-08 10:21:19.413 Adobe Lightroom 2 Beta[308] Oops! An untagged string (assertion failed!) got thrown far enough that we display it to the user. This shouldn't happen."
I tried reinstalling but must have missed a file as the same error keeps appearing.
Can anyone give me a hand?

See the notes on the beta forum. Post this there.

Assertion failed during save of slideshow settings

Hi,
Great to be able to try out the new Lightroom version!
Here are two things I'm noticing:
There seem to be several issues with slideshow. When I try to change slideshow settings, "impromptu slideshow" stops working in all modes. Also, on occasion, when I try to save slideshow parameters (in the slideshow module), I get the following error message: "Unexpected error performing command: assertion failed!".
What I did was turning almost everything off in the slideshow, no border, cast shadow, guides, no borders, identity plate, rating stars, text overlays, color wash, intro/ending screens, then tried to save that.
The other issue is that it's significantly slower than my current Lightroom 2 version, as many people have already pointed out.
Am using a 4-core Vista 64 machine.

Hi Victoria,
Thanks very much for your quick reply and for looking into this. Here is a sequence that reliably reproduces it for me, after some trials, hopefully this is helpful:
Go to Library module, exit Lightroom 4
Start Lightroom 4 again (starts in Library module).
Switch to Slide show module
Make some changes to settings in the right panel (e. g. disable "Stroke Border") and save changes (Slideshow->Save Slideshow settings). Note: When I first did that, I unchecked all the boxes, except for "Slide Duration" and "Repeat").
Switch back to Library module.
Exit Lightroom and restart it (is in Library module now).
Click on "impromptu slide show" button in the toolbar. The slide show will start, but with different settings from what was saved earlier.
Exit out of slide show with ESC. Switch to Slideshow module.
You can see now that the settings are different from what was saved. Make some changes to settings in the right panel (e. g. ...) and try to save changes (Slideshow->Save Slideshow settings). I get an assertion failure when I do this.
Generally, when I exit Lightroom from the Slideshow module and come back, I see the previously saved settings. However, when I exit Lightroom from the Library module and restart it, I get different slideshow settings from what I last saved.
Also, it seems like "impromptu slideshow" stops working, once I visit the Slideshow module.
Once I saw Lightroom abend when I exited after getting the assertion - but I can't reproduce that. Here is the event that was generated:
Faulting application lightroom.exe, version 4.0.0.1, time stamp 0x4ef2621d, faulting module ntdll.dll, version 6.0.6002.18541, time stamp 0x4ec3e855, exception code 0xc0000374, fault offset 0x00000000000acb17, process id 0x59c, application start time 0x01ccd4c03f0b3450.

Assertion failed: Incorrect use of AdfRichUIPeer....

Dear all,
i have a table which its partial trigger is set to a button and that button's partial submit is set to true...
now i got that error when trying to navigate between the input texts when the table is in the insertion mode -->
Assertion failed: Incorrect use of AdfRichUIPeer.GetDomNodeForCommentComponent.AdfRichSelectOneChoice [oracle.adf.RichSelectOneChoice] id=r1:2:t1:17:soc1
StackTrace:
I searched the forum and changed the partial submit of the button to false and everything went fine with me , but am not sure why the partial submit of the button caused that problem ?
Thanks in Advance,
Lama
Edited by: Delta on Sep 28, 2010 5:37 AM

Hi,
I too have come across this kind of exception.
Generally we get this error message, when the adf tags are not used properly. I mean the syntax. In my case, i got this exception because of using render property.
The page was supposed to render a taksflow from the list of 3 taskflows based on the value selected from a selectOneChoice. With this implementation, i got this error. Later i used visible property and then it starts working fine.
Hence would like to have a look at your page/fragments. Can you post your code here.
Thanks,
Kiran Konjeti

AMS 5 - Assert failed

Hello,
I am running AMS 5 on Amazon and I`m facing some troubles.
I am running CentOS 5.5 on my server and when I run the command TOP I don`t the process amscore, but, my server is running.
When i run the command
./amscore, I get the following error:
Adobe Adobe Media Server (Core)Console mode.
FMS detected IPv6 protocol stack!
FMS config <NetworkingIPv6 enable=false>
FMS running in IPv4 protocol stack mode!
Host: ip-10-252-24-80 IPv4: 10.252.24.80
Assert failed in tincan/util/TCIpcQueue.cpp line 48
Server aborted.
Segmentation fault
When I run the command netstat -nap, I get this:
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address               Foreign Address             State            PID/Program name
tcp        0      0 127.0.0.1:11110                       0.0.0.0:*                   LISTEN           2166/amsadmin
tcp        0      0 0.0.0.0:1935                            0.0.0.0:*                   LISTEN           1446/amsedge
tcp        0      0 127.0.0.1:19350                       0.0.0.0:*                   LISTEN           1446/amsedge
tcp        0      0 0.0.0.0:1111                             0.0.0.0:*                   LISTEN           2166/amsadmin
tcp        0      0 127.0.0.1:11110             127.0.0.1:55331             ESTABLISHED      2166/amsadmin
tcp        0      0 127.0.0.1:48667             127.0.0.1:19350             ESTABLISHED      2393/amscore
tcp        0      0 127.0.0.1:11110             127.0.0.1:52737             ESTABLISHED      2166/amsadmin
tcp        0      0 127.0.0.1:19350             127.0.0.1:48667             ESTABLISHED      1446/amsedge
tcp        0      0 127.0.0.1:55183             127.0.0.1:1935              ESTABLISHED      2104/httpd
tcp        0      0 127.0.0.1:55182             127.0.0.1:1935              ESTABLISHED      2104/httpd
tcp        0      0 127.0.0.1:55181             127.0.0.1:1935              ESTABLISHED      2104/httpd
tcp        0      0 127.0.0.1:55180             127.0.0.1:1935              ESTABLISHED      2104/httpd
tcp        0      0 127.0.0.1:53028             127.0.0.1:19350             ESTABLISHED      1727/amscore
tcp        0      0 127.0.0.1:19350             127.0.0.1:53028             ESTABLISHED      1446/amsedge
tcp        0      0 127.0.0.1:1935              127.0.0.1:55183             ESTABLISHED      1446/amsedge
tcp        0      0 127.0.0.1:1935              127.0.0.1:55182             ESTABLISHED      1446/amsedge
tcp        0      0 127.0.0.1:1935              127.0.0.1:55181             ESTABLISHED      1446/amsedge
tcp        0      0 127.0.0.1:1935              127.0.0.1:55180             ESTABLISHED      1446/amsedge
tcp        0      0 127.0.0.1:52737             127.0.0.1:11110             ESTABLISHED      1727/amscore
tcp        0      0 10.252.24.80:1935           201.45.72.62:65364          ESTABLISHED      1727/amscore
tcp        0      0 127.0.0.1:55331             127.0.0.1:11110             ESTABLISHED      2393/amscore
tcp        0      0 10.252.24.80:1111           189.29.131.28:62777         ESTABLISHED    2166/amsadmin
tcp        0      0 10.252.24.80:1935           177.81.58.187:55591         ESTABLISHED      1727/amscore
tcp        0      0 10.252.24.80:1935           201.28.179.130:16364        ESTABLISHED      1727/amscore
tcp        0      1 10.252.24.80:1935           200.193.77.204:48404        LAST_ACK    -
tcp        0      0 :::8134                     :::*                        LISTEN      1441/httpd
tcp        0      0 :::80                       :::*                        LISTEN      1441/httpd
tcp        0      0 :::22                       :::*                        LISTEN      1345/sshd
tcp        0   3632 ::ffff:10.252.24.80:22      ::ffff:201.28.179.130:26781 ESTABLISHED 2851/2
tcp        0      0 ::ffff:10.252.24.80:22      ::ffff:177.139.162.15:54599 ESTABLISHED 2831/1
tcp        0      0 ::ffff:10.252.24.80:22      ::ffff:177.139.162.15:64996 ESTABLISHED 2352/0
udp        0      0 10.252.24.80:1935           0.0.0.0:*                               1446/amsedge
udp        0      0 127.0.0.1:1935              0.0.0.0:*                               1446/amsedge
udp        0      0 10.252.24.80:19350          0.0.0.0:*                               1446/amsedge
udp        0      0 127.0.0.1:19350             0.0.0.0:*                               1446/amsedge
udp        0      0 10.252.24.80:19351          0.0.0.0:*                               1727/amscore
udp        0      0 127.0.0.1:19351             0.0.0.0:*                               1727/amscore
udp        0      0 10.252.24.80:19352          0.0.0.0:*                               2393/amscore
udp        0      0 127.0.0.1:19352             0.0.0.0:*                               2393/amscore
udp        0      0 0.0.0.0:68                  0.0.0.0:*                               1223/dhclient
Thanks

In the core log I see this:
2012-09-13
19:44:04
3516
(w)2581171
System memory load (91) is high.
2012-09-13
19:44:05
3516
(i)2581172
System memory load (90) is now below the maximum threshold.
2012-09-13
19:44:08
3516
(w)2581171
System memory load (91) is high.
2012-09-13
19:44:09
3516
(i)2581172
System memory load (90) is now below the maximum threshold.
2012-09-13
19:44:10
3516
(w)2581171
System memory load (91) is high.
2012-09-13
19:44:11
3516
(i)2581172
System memory load (90) is now below the maximum threshold.
Nothing on Master, the time was around the time it crashed, the problem is that it crashes when I have 100+ clients connected and crashes when I have 30 clients connects.
It`s like this. The server start with very low memory usage, around 30%, then, with the same number of clients it goes to 50 ~ 60%, then I have more clients (70 ~ 90) and the memory usage goes to 100%, and the memory usage never goes down, no matter what. Sometimes I have 100 clients and my memory usage is in 100%, then my clients disconect and I get 30 and my memory usage is still at 100%.
Seems like the server increases the memory usage and even on 100% tries to increase even more and crashes.
Thanks

SWPM - System Copy - Assertion Failed Unable to load database

Hello again,
(already the next question form me, sorry for this
I am executing a sysetm copy (DB-refresh) on ASE using SWPM.
However, in "Configure Components" step I get the error: Assertion failed. Unable to load database <SID of Target Sysetm>.
Where else can I check for errors?
I think it is still something on which I already worked (with other thread).
In sapinst_dev.log I found this
TRACE      2015-03-25 11:05:00.320
SAPInst calls the LogInquirer. The output of the LogInquirer can be found in file sapinst_loginquirer.log.
TRACE      2015-03-25 11:05:06.122 [iaxxgenimp.cpp:638]
            CGuiEngineImp::showMessageBox()
<html> <head> </head> <body> <p> An error occurred while processing option <i>SAP Enhancement Package 1 for SAP N
etWeaver 7.3 > SAP ASE > System Copy > Target System > Standard System > Based on AS ABAP > Database Refresh or M
ove( Last error reported by the step: Assertion failed: Unable to load database <SID>.)</i>. You can now: </p> <ul>
<li> Choose <i>Retry</i><br>to repeat the current step. </li> <li> Choose <i>Log Files</i><br>to get more inform
ation about the error. </li> <li> Stop the option and continue later. </li> </ul> <p> Log files are written to /t
mp/sapinst_instdir/NW731/SYB/COPY/SYSTEM/STD/AS-ABAP/REF. </p> </body></html>
TRACE      2015-03-25 11:05:06.124 [iaxxgenimp.cpp:1031]
           CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
In sapinst.log I found this:
ERROR 2015-03-25 11:04:59.573
FCO-00011 The step syb_step_setup_preload with step key |NW_ABAP_DB_DBRefresh|ind|ind|ind|ind|0|0|NW_ABAP_DB|ind
|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|createdbandload|0|NW_CreateDB|ind|ind|ind|ind|createdb|0|NW_S
YB_DB|ind|ind|ind|ind|SYB_DB_CONTEXT|0|syb_step_setup_preload was executed with status ERROR ( Last error reporte
d by the step: Assertion failed: Unable to load database <SID>.).
INFO 2015-03-25 11:04:59.772
Creating file /tmp/sapinst_instdir/NW731/SYB/COPY/SYSTEM/STD/AS-ABAP/REF/__instana_tmp.xml.
INFO 2015-03-25 11:05:00.307
Removed file /tmp/sapinst_instdir/NW731/SYB/COPY/SYSTEM/STD/AS-ABAP/REF/instslana.xml.
INFO 2015-03-25 11:05:00.308
Creating file /tmp/sapinst_instdir/NW731/SYB/COPY/SYSTEM/STD/AS-ABAP/REF/instslana.xml.

Hello Kiran,
I did a few tests again yesterday, and it was really a stupid mistake from myside.
The error message did mean, that there wasn't enough space.
It isn't the authority issue, it was a leak of space.
FYI, the complete DB-Size of Source System is required - NOT JUST RESERVED SPACE!!!
Thx for help and sorry for stealing your time :O

Master Data loading got failed: error "Update mode R is not supported by th

Hello Experts,
I use to load master data for 0Customer_Attr though daily process chain, it was running successfully.
For last 2 days master data loading for 0Customer_Attr got failed and it gives following error message:
"Update mode R is not supported by the extraction API"
Can anyone tell me what is that error for? how to resolve this issue?
Regards,
Nirav

Hi
Update mode R error will come in the below case
You are running a delta (for master data) which afils due to some error. to resolve that error, you make the load red and try to repeat the load.
This time the load will fail with update mode R.
As repeat delta is not supported.
So, now, the only thing you can do is to reinit the delta(as told in above posts) and then you can proceed. The earlier problem has nothing to do with update mode R.
example your fiorst delta failed with replication issue.
only replicating and repeaing will not solve the update mode R.
you will have to do both replication of the data source and re-int for the update mode R.
One more thing I would like to add is.
If the the delat which failed with error the first time(not update mode R), then
you have to do init with data transfer
if it failed without picking any records,
then do init without data transfer.
Hope this helps
Regards
Shilpa
Edited by: Shilpa Vinayak on Oct 14, 2008 12:48 PM

Assert Failed: Flashfarm

I am having a problem on intel macs with a crash after an
assert is tripped
Assert failed:
/flashfarm/depot/main/player/branches/FlashPlayer/FlashPlayer8_MacIntel_Integrated/platfo rm/mac/plugins/../mpi_player.cpp:5445
this is with 8.0r27 (is there a later one for intel mac)
my code dumps har after this any word on why this assert
fails?

Yes, there is now a Flash Player 9 Beta for Intel-based
Macintosh computers:
http://www.adobe.com/products/flashplayer/public_beta/

Internal error: assertion failed - still won't work in LR4

When I try to export an image from LR4 I get the "internal error: assertion failed" error. I'm running Lion 10.7.3 on a MacBook.
I started by reading the thread at:
Re: "internal error: assertion failed" when exporting via LR4
tinaTS offered what she thought was the correct fix but her suggestion didn't apply to my situation. She suggested moving user presets but I don't have any to move.
I also tried the basic “repair permissions” and Lion restart with no luck.
Kirk Marcus suggested removing the com.adobe.Lightroom4.plist from my library. This didn't help, still getting the error.
Then I removed these files as well:
com.adobe.Lightroom3.plist
com.adobe.Lightroom2.plist
com.adobe.Lightroom3.LSSharedFileList.plist
com.adobe.Lightroom3.plist.lockfile
None of that helped.
I tried removing all files that began with com.adobe.Lightroom and then creating a new library and just importing one picture but I still get the same "internal error" VERY FRUSTRATING.
Obviously, the program is worthless to me if I can't export images.
Additional suggestions would be appreciated. I see that lots of people on the internet are having this problem but none of the suggestions I've found so far have been of any help.

Thanks for the suggestions. I tried removing the com.adobe.Lightroom4.plist. This didn't help, still getting the error.
Then I removed these files as well:
com.adobe.Lightroom3.plist
com.adobe.Lightroom2.plist
com.adobe.Lightroom3.LSSharedFileList.plist
com.adobe.Lightroom3.plist.lockfile
None of that helped.
I tried creating a new library and just importing one picture but I still get the same "internal error" VERY FRUSTRATING.

Assertion Failed - Dump when clicking on the links from Portal for WD Comp

Hi,
We have a WD Component which is integrated to the Portal . When we click on the link in the Portal for the first 2 times, the selection screen is shown correctly ( when debugged, the program stops in WDDOINIT method before the sel.screen is shown).
When we click on the link for the third or fourth time with no time gap, it shows a dump. This is the dump I am getting.
Runtime Errors         ASSERTION_FAILED
Date and Time          01/06/2011 10:13:58
Short text
The ASSERT condition was violated.
What happened?
In the running application program, the ASSERT statement recognized a
situation that should not have occurred.
The runtime error was triggered for one of these reasons:
- For the checkpoint group specified with the ASSERT statement, the
activation mode is set to "abort".
- Via a system variant, the activation mode is globally set to "abort"
for checkpoint groups in this system.
- The activation mode is set to "abort" on program level.
- The ASSERT statement is not assigned to any checkpoint group.
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"ASSERTION_FAILED" " "
"CL_NW7_VIEW_ELEMENT_ADAPTER===CP" or "CL_NW7_VIEW_ELEMENT_ADAPTER===CM004"
"DISPATCH_NW7_EVENT"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
User and Transaction
Client.............. 010
User................ "STECURRY"
Language Key........ "E"
Transaction......... " "
Transactions ID..... "4D250E9ADDFB00BDE10080000A041004"
Program............. "CL_NW7_VIEW_ELEMENT_ADAPTER===CP"
Screen.............. "SAPMHTTP 0010"
Screen Line......... 2
Information on Caller ofr "HTTPS" Connection:
Plug-in Type.......... "HTTPS"
Caller IP............. "10.6.4.220"
Caller Port........... 443
Universal Resource Id. "/sap/bc/webdynpro/sap/ZEM_INV_APP_ASSIGNMENTS/"
Information on where terminated
Termination occurred in the ABAP program "CL_NW7_VIEW_ELEMENT_ADAPTER===CP" -
in "DISPATCH_NW7_EVENT".
The main program was "SAPMHTTP ".
In the source code you have the termination point in line 5
of the (Include) program "CL_NW7_VIEW_ELEMENT_ADAPTER===CM004".
Source Code Extract
Line
SourceCde
1
METHOD dispatch_nw7_event.
2
DATA: l_event_handler TYPE REF TO if_wdr_nw7_event_handler.
3
4
l_event_handler = get_nw7_event_handler( i_event_handler_id ).
>>>>>
assert l_event_handler is not initial.
6
7
" View-based Delta Rendering: tracking of client events
8
raise event on_nw7_handle_event
9
exporting
10
event_handler = l_event_handler
11
event_name    = i_event_name.
12
13
14
l_event_handler->handle_event(
15
i_event_name       = i_event_name
16
i_event_parameters = i_event_parameters
17
i_update_data      = i_update_data
18
i_event_queue      = i_event_queue ).
19
ENDMETHOD.
- I have cut the dump to make it short and clear.
One of my colleague ran a HTTP watch trace and I am attaching it as well.
<body> <table cellpadding="0" cellspacing="0" border="0" width="100%"> <tr> <td> <h1> Error when processing your request </h1> <br> <h2> What has happened? </h2> <p> The URL https://uswasspq.deloitte.com:/sap/bc/webdynpro/sap/ZEM_INV_APPROVER_MAIN//ucfLOADING was not called due to an error. </p> </td> </tr> <tr> <td> </td> </tr> <tr> <td class="emphasize"> <strong> Note </strong> <br> <ul> <li> The following error text was processed in the system SPQ : <b> User session (HTTP/SMTP/..) closed after timeout </b> </li> </ul> <ul> <li> The error occurred on the application server usuxc204_SPQ_01 and in the work process 1 . </li> </ul> <ul> <li> The termination type was: ERROR_MESSAGE_STATE </li> </ul> <ul> <li> The ABAP call stack was: <br> Method: PREPROCESS_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP<BR>Method: IF_HTTP_EXTENSIONHANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP<BR>Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP<BR>Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME<BR>Module: %_HTTP_START of program SAPMHTTP<BR> </li> </ul> </td> </tr> <tr> <td> </td> </tr> <tr> <td> <p> </p> <h2> What can I do? </h2> <ul> <li> If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system SPQ in transaction ST22. </li> </ul> <ul> <li> If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server usuxc204_SPQ_01 in transaction SM21. </li> </ul> <ul> <li> If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 1 in transaction ST11 on the application server usuxc204_SPQ_01 . In some situations, you may also need to analyze the trace files of other work processes. </li> </ul> <ul> <li> If you do not yet have a user ID, contact your system administrator. </li> </ul> <br/> <p class="note"> Error code: ICF-IE-https -c: 010 -u: STHUGHES -l: E -s: SPQ -i: usuxc204_SPQ_01 -w: 1 -d: 20110208 -t: 131808 -v: ERROR_MESSAGE_STATE -e: User session (HTTP/SMTP/..) closed after timeout </p> <br/> <p> HTTP 500 - Internal Server Error <br/> <p> Your SAP Internet Communication Framework Team </p> </td> </tr> </table> </body> </html>
After this error a URL is called form the WebDynpro to the following html page.
https://uswasspq.deloitte.com/sap/bc/webdynpro/sap/zem_inv_approver_main/dps_Error_Page.html ( this is the friendly message we have put so that the user does not see the dump on his screen.
I tried invalidating the nodes in the WDDOEXIT at the view level but it did not help. This is a show stopper for the project to go live.
Thanks,
Guru.

Hi Guru,
It is not readable the way you posted and that might be the reason that you do not get reactions.
Can you please confirm the following.
1. Is this problem occurs with out portal when you run the application standalone in SAP GUI.
2. What is going on wddoinit method or wddomodify method, any resource handling there ?

Assertion failed in Survey mode

Similar Messages

Maybe you are looking for