Assertion failed! while exporting my pics from lightroom5  plz help?

assertion failed! while exporting my pics from lightroom5  plz help?

If exporting via "hard drive" service, check post-processing in bottom section of export dialog box, and set it to something other than "blank".

Similar Messages

  • CrystalReport - Getting "The Report Application Server failed" while export

    Hi Experts,
    I am using Crystal Reports 2008 in my ASP.NET application to generate reports. Everythings works fine in the development environment. When I deploy it on my Windows Server 2003 system, I get an error "The Report Application Server failed" while exporting the report from the report control. But, the report assuch is working fine even in the production environement. I experience this issue only while exporting to excel or anyother format.
    Do I need to configure anything or any settings needs to be turned on in the .rpt files!!
    Appreciate any help to get this issue resolved.
    TIA,
    Prem

    First a confirmation. When you say; "...exporting the report from the report control...", you mean the printer button on the viewer?
    Questions;
    What version of .NET?
    What Crystal Reports Service Pack are you on?
    How was the CR runtime installed on the server?\
    Can you print the report OK?
    Are you using sessions?
    Ludek

  • Weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Cannot export non clusterable object with jndiName ]

    Hi,
    I am trying to deploy an EJB module have 4-5 EJB's on weblogic 8.1 through JBuilder.
    I am getting following error during deployment.
    Exception:weblogic.management.ApplicationException: prepare failed for Sample.jar
         Module: Sample.jar     Error: Exception preparing module: EJBModule(Sample.jar,status=NEW)
    Unable to deploy EJB: SampleBean from Sample.jar:
    weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Cannot export non
    clusterable object with jndiName ]
         at weblogic.utils.Debug.assertion(Debug.java:57)
         at weblogic.rmi.extensions.server.ServerHelper.exportObject(ServerHelper.java:272)
         at weblogic.ejb20.internal.BaseEJBHome.setup(BaseEJBHome.java:95)
         at weblogic.ejb20.internal.StatelessEJBHome.setup(StatelessEJBHome.java:67)
         at weblogic.ejb20.deployer.ClientDrivenBeanInfoImpl.prepare(ClientDrivenBeanInfoImpl.java:979)
         at weblogic.ejb20.deployer.EJBDeployer.setupBeanInfos(EJBDeployer.java:983)
         at weblogic.ejb20.deployer.EJBDeployer.prepare(EJBDeployer.java:1283)
         at weblogic.ejb20.deployer.EJBModule.prepare(EJBModule.java:477)
         at weblogic.j2ee.J2EEApplicationContainer.prepareModule(J2EEApplicationContainer.java:2962)
         at weblogic.j2ee.J2EEApplicationContainer.prepareModules(J2EEApplicationContainer.java:1534)
         at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1188)
         at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1031)
         at weblogic.management.deploy.slave.SlaveDeployer$ComponentActivateTask.prepareContainer(SlaveDeployer.java:2602)
         at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.createContainer(SlaveDeployer.java:2552)
         at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.prepare(SlaveDeployer.java:2474)
         at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer.java:798)
         at weblogic.management.deploy.slave.SlaveDeployer.prepareDelta(SlaveDeployer.java:507)
         at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java:465)
         at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:25)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
    Any clue?, what its talking about?
    Thanks
    Naresh

    Hi,
    I am trying to deploy an EJB module have 4-5 EJB's on weblogic 8.1 through JBuilder.
    I am getting following error during deployment.
    Exception:weblogic.management.ApplicationException: prepare failed for Sample.jar
         Module: Sample.jar     Error: Exception preparing module: EJBModule(Sample.jar,status=NEW)
    Unable to deploy EJB: SampleBean from Sample.jar:
    weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Cannot export non
    clusterable object with jndiName ]
         at weblogic.utils.Debug.assertion(Debug.java:57)
         at weblogic.rmi.extensions.server.ServerHelper.exportObject(ServerHelper.java:272)
         at weblogic.ejb20.internal.BaseEJBHome.setup(BaseEJBHome.java:95)
         at weblogic.ejb20.internal.StatelessEJBHome.setup(StatelessEJBHome.java:67)
         at weblogic.ejb20.deployer.ClientDrivenBeanInfoImpl.prepare(ClientDrivenBeanInfoImpl.java:979)
         at weblogic.ejb20.deployer.EJBDeployer.setupBeanInfos(EJBDeployer.java:983)
         at weblogic.ejb20.deployer.EJBDeployer.prepare(EJBDeployer.java:1283)
         at weblogic.ejb20.deployer.EJBModule.prepare(EJBModule.java:477)
         at weblogic.j2ee.J2EEApplicationContainer.prepareModule(J2EEApplicationContainer.java:2962)
         at weblogic.j2ee.J2EEApplicationContainer.prepareModules(J2EEApplicationContainer.java:1534)
         at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1188)
         at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1031)
         at weblogic.management.deploy.slave.SlaveDeployer$ComponentActivateTask.prepareContainer(SlaveDeployer.java:2602)
         at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.createContainer(SlaveDeployer.java:2552)
         at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.prepare(SlaveDeployer.java:2474)
         at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer.java:798)
         at weblogic.management.deploy.slave.SlaveDeployer.prepareDelta(SlaveDeployer.java:507)
         at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java:465)
         at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:25)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
    Any clue?, what its talking about?
    Thanks
    Naresh

  • Problem while exporting the data from a report to an excel file.

    Hi SAP guru's,
    I have a problem while exporting the data from a report to an excel file.
    The problem is that after exporting, the excel file seems to have some irrelevant characters....I am checking this using SOST transaction..
    Required text (Russian):
    Операции по счету                                    
    № документа     Тип документа     № учетной записи     Дата документа     Валюта     Сумма, вкл. НДС     Срок оплаты     Описание документа
    Current Text :
       ? 5 @ 0 F 8 8  ? >  A G 5 B C                                   
    !   4 > : C       "" 8 ?  4 > : C      !   C G 5 B = > 9  7 0 ? 8 A 8        0 B 0  4 > : C         0 ; N B 0      ! C <       ! @ > :  > ? ; 0 B K        ? 8 A 0 = 8 5  4 > : C
    Can you help me making configuration settings if any?
    Regards,
    Avinash Raju

    Hi Avinash
    To download  such characteres you need to adjust code page to be used during export. You can review SAP note 73606 to identify which code page is required for this language
    Best regards

  • In azure microsoft DEPLOYMENT FAILED while fetching the files from git

    Hello there,
    I am using windows azure service for deploying my website but it gets display error  "DEPLOYMENT FAILED"  while fetching the file from my git repository. Please suggest me.

    Hi David,
    Thank you for your response,
    I deployed it using git and now its completed but i have an anather question that is I have created the app in portal.azure.com and a mysql db, both the files and db are deployed but still I am getting error "You
    do not have permission to view this directory or page." 
    Please suggest.

  • I want to delete my i cloude account but i dont know the password of my i cloude account because i bought it from market plz help me

    i want to delete my i cloude account but i dont know the password of my i cloude account because i bought it from market plz help me

    Welcome to the Apple Community.
    You can only wipe your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
    Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely.

  • Transportation failed while sending a request from DEV - Quality

    Hi sdns,,,
                       I got an error while sending a request from DEV -> Quality...Am new to transportation.. mayi know.. wat was this error and wat kind of action i need to take over here...
    I got an error message like this,,
    Start of the after-import method for object type R3TR ELEM (Activation Mode)          
    Element 0QWSUMHUOOK19OOUIFCLB4T8C was copied from 'modified' to 'active'              
    Error when activating element 45HKXU7KAG6V1I0L1W3LWEDZC                               
    Element 3Z571P6G8RCDNR3NQAEI8S6YW is missing in version M                                                                               
    Start of the after-import method for object type R3TR ELEM (Delete Mode)              
    Errors occurred during post-handling RS_AFTER_IMPORT for ELEM L                       
    RS_AFTER_IMPORT belongs to package RS                                                 
    The errors affect the following components:                                           
       BW-WHM (Warehouse Management)                                                      
    Post-import method RS_AFTER_IMPORT completed for ELEM L, date and time: 20070417044624
    Post-import methods of change/transport request I11K903499 completed                  
         Start of subsequent processing ... 20070417044621                                
         End of subsequent processing... 20070417044624                                   
    Answering getz really appreciated,
    Thanks & Regards,
    Aluri

    Hi,
    This error will come when your are transporting any Query/ BW elements to Production system.
    when there is element in the deve. class $TEM in your collected objects this error may come, so identify this elements and change this Dev.class to other package used in transportaion.
    To change all the elements to common dev. class first collecting the elements using transport connection. secondly, using the Pencil button at the menu of trasnport change to required dev.class.
    you can change individaul elements also.
    Regards,
    Vish.

  • Exporting develoved pics from lightroom ( laptop) to lightroom (workstation)

    Hi everybody,
    I have Lightroom 2.1 on my workstation and on my laptop. After a long journey I want to move the pictures I've stored in Lightroom (Laptop) to the Lightroomversion on my workstation.
    During the journey I have develloped a lot of these pictures and want to export the pictures with the develloping data. How can I manage this? Thanks for helping me Tom

    There are two major ways.
    I. Export a catalog from your images. Just select your images or a collection containing the images you want to transfer on the laptop and choose "export as catalog" from the filemenu. Make sure to select "export negative files." You'll get a folder with the catalog file and all originals in it. Copy this over to your desktop and import the catalog into your main catalog there or just use the catalog as is.
    II. Export all files as originals or as dngs. Then import those into your desktop.

  • Error while Exporting to Excel from ALV Report

    Dear Experts,
    When I am exporting my report output to an Excel Sheet  directly some of the headers are appearing in Row No 1 and some are displaying in Row No. 2. Hence the corresponding values are also showing in the same manner.
    I want to show all the Rows in a single row in row No 1. I am unable to find the solution for this.
    But when I am exporting the same report into the MHTML Excel format the Report Headings are showing correctly in a single row and hence the respective values are also showing correctly in a single row. And if I save the same MHTML Excel as normal EXCEL(97-2003) format then also it is showing correctly.
    The problem comes only when I as exporting it directly into EXCEL(97-2003) format. 
    Plz help.

    Hi,
    This is the Technical limitation of ABAP list export to local file.
    ALV grid greater than 1023 characters per line will be split into 2 lines.
    To prevent a line break occuring when you download the list as a local spreadsheet file, you must reduce the width of the list in ALV. You can do this either by hiding columns or by changing the column widths in the ALV. Take care that the column heading characters also dont exceed 1023 characters. This will work.
    Thanks
    LG

  • How to specify the target name while deploying a code in OSB-- Plz Help

    Hi all,
    Am working in creating a cluster environment. For my testing i created a new managed server(OSB_Server) in 9001 port in the admin console itself and that server started running. The default managed server(Admin_Server) is in 7001 port. So when i deploy a code in 7001 sb console the WSDL gets exposed in 7001 because the default admin server port is 7001. While deploying a code in service bus admin console we are not specifying the target name. So how to specify the target name while deploying the code in service bus admin console. Plz help me.
    Regards
    Prabhu

    Hi Prabhu,
    There are three kind of server architecture possible for OSB -
    1. Single server - Everything gets deployed on Admin server itself
    2. Admin Server + Single Managed Server for OSB -- OSB configuration gets deployed on OSB managed server. OSB resources (proxy service, WSDL, Schema) will remain available on OSB managed server port only and NOT on admin server port
    3. Admin Server + OSB cluster -- OSB configuration gets deployed on OSB cluster. OSB resources (proxy service, WSDL, Schema) will remain available on OSB Cluster port(s) only and NOT on admin server port
    Converting one type of server architecture to any other type, requires a manual tedious process, so it is suggested that you create domain accordingly i.e. if you need clusters then while creating domain itself, create OSB cluster, so that all OSB applications gets deployed to OSB cluster. I will suggest you to create a clustered domain from scratch and import the configuration from your existing domian to this new clustered domain.
    You may refer-
    http://download.oracle.com/docs/cd/E17904_01/doc.1111/e15022/toc.htm
    Regards,
    Anuj

  • Hi I am from Pakistan Plz help me???????????

    Hi,
          I am from Pakistan I need you help kindly plz help me. Here I describe my problem to and hope fully that you shoud try your level best to solve and support to me. I shall very thank full to you in advance. Respected I have"Samsung saga i" model of windows mobile with "window ver 6.1 pro " with coperate support of Verizon. Problem I am face is that I have purchased it here from my local market. After updating of software my set became "GSM LOCKED" try to unlock it but still it was for Gsm network here I write error to you"CANNOT REGISTERED ON THIS NETWORK AT THIS TIME CHANGE YOUR NET WORK OR CLOSED YOUR DATA ACCOUNT NOW"And also require from me Pin on dialing screen. I am very distrust bcoz I love it and crazy it but it was now unable to work for me . 
    Plz guide to right me. I am very thank full to you
    Thank you
    From
    Hammad Sabir
    {edited for privacy}

    There is a thread which spells out the method of unlocking a Verizon global sim card.
    The post in particular which gives the information is from a Verizon employee and I have listed it below:
    "Please keep in mind that only Verizon Wireless Global Support Team completes the SIM Unlock procedure. Please contact our Global Support team at 9085594899.
    The following qualifications must be met for the SIM (Subscriber Identity Module) to be unlocked:
    Must be a Verizon Wireless customer.
    The device being unlocked must be active on a Verizon Wireless line of service.
    The line of service must be active at least 60 days.
    The line of service must be in good standing for the past 60 days.
    Only one SIM Unlock per line every 10 months.
    The customer's manufacturer's device warranty is not affected by a SIM unlock as long as the customer remains with Verizon Wireless."
    Edit: As it does not seem you meet the qualifications, Verizon will probably not be willing to help you.

  • Hi I have a problem of purchasing from zynga plz help

    Hi I have a problem of purchasing from zynga plz help

    What happens when you try to buy them ? If you are getting a message to contact iTunes support then you can so via this page and ask them why it's appearing (these are user-to-user forums, we won't know) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

  • SSIS SharePointListAdapter fails while exporting a SharePoint List from SharePoint 2007

    Greetings,
    I'm trying to export List from SharePoint 2007 into SQL Server table, using SSIS  SharePointListSource component (installed from https://sqlsrvintegrationsrv.codeplex.com/releases/view/17652)
    But in component editor I'm getting this error :
    Error at Data Flow Task [SharePoint List Source [13]]: Microsoft.Samples.SqlServer.SSIS.SharePointUtility.SharePointUnhandledException: Unspecified SharePoint Error.  A possible reason might be you are trying to retrieve too many items at a time (Batch
    size) ---> System.ServiceModel.FaultException: Exception of type 'Microsoft.SharePoint.SoapServer.SoapServerException' was thrown.
    Server stack trace: 
       at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc rpc)
       at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
       at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
    Exception rethrown at [0]: 
       at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
       at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData msgData, Int32 type)
       at Microsoft.Samples.SqlServer.SSIS.SharePointUtility.ViewsService.ViewsSoap.GetViewCollection(GetViewCollectionRequest request)
       at Microsoft.Samples.SqlServer.SSIS.SharePointUtility.ViewsService.ViewsSoapClient.ViewsService_ViewsSoap_GetViewCollection(GetViewCollectionRequest request)
       at Microsoft.Samples.SqlServer.SSIS.SharePointUtility.ViewsService.ViewsSoapClient.GetViewCollection(String listName)
       at Microsoft.Samples.SqlServer.SSIS.SharePointUtility.Adapter.ViewsAdapter.GetSharePointListViews(String listName)
       --- End of inner exception stack trace ---
       at Microsoft.Samples.SqlServer.SSIS.SharePointUtility.Adapter.ViewsAdapter.GetSharePointListViews(String listName)
       at Microsoft.Samples.SqlServer.SSIS.SharePointUtility.Adapter.ViewsAdapter.GetViewList(String listName)
       at Microsoft.Samples.SqlServer.SSIS.SharePointUtility.Adapter.ListsAdapter.LookupViewName(String listName, String viewName)
       at Microsoft.Samples.SqlServer.SSIS.SharePointUtility.ListServiceUtility.GetFields(Uri sharepointUri, NetworkCredential credentials, String listName, String viewName)
       at Microsoft.Samples.SqlServer.SSIS.SharePointListAdapters.SharePointListSource.GetAccessibleSharePointColumns(String sharepointUrl, String listName, String viewName)
       at Microsoft.Samples.SqlServer.SSIS.SharePointListAdapters.SharePointListSource.CreateExternalMetaDataColumns(IDTSOutput100 output, String sharepointUrl, String listName, String viewName, Dictionary`2 existingColumnData)
       at Microsoft.Samples.SqlServer.SSIS.SharePointListAdapters.SharePointListSource.LoadDataSourceInformation(IDTSOutput100 output, Dictionary`2 existingColumnData)
       at Microsoft.Samples.SqlServer.SSIS.SharePointListAdapters.SharePointListSource.ReinitializeMetaData()
       at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostReinitializeMetaData(IDTSManagedComponentWrapper100 wrapper)
    Increased Batch Size from default 1000 to 32000, still that error.
    Thought, this was List size problem, but small lists still do not export.
    Also, the same lists perfectly export from SharePoint 2010 using the very same component.
    Any solutions for this error ?
    Thanks in advance

    The reason was the  difference in List's names on web portal and the name of list itself.

  • Error while Exporting large data from Reportviewer on azure hosted website.

    Hi,
    I have website hosted on azure. I used SSRS reportviewer control to showcase my reports. while doing so i faced an issue.
    Whenever i export large amount of data as Excel/PDF/word/tiff it abruptly throw following error:
    Error: Microsoft.Reporting.WebForms.ReportServerException: The remote server returned an error: (401) Unauthorized. ---> System.Net.WebException: The remote server returned an error: (401) Unauthorized.
    at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
    at Microsoft.Reporting.WebForms.SoapReportExecutionService.ServerUrlRequest(AbortState abortState, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
    --- End of inner exception stack trace ---
    at Microsoft.Reporting.WebForms.SoapReportExecutionService.ServerUrlRequest(AbortState abortState, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
    at Microsoft.Reporting.WebForms.SoapReportExecutionService.Render(AbortState abortState, String reportPath, String executionId, String historyId, String format, XmlNodeList deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
    at Microsoft.Reporting.WebForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
    at Microsoft.Reporting.WebForms.ServerReport.Render(String format, String deviceInfo, NameValueCollection urlAccessParameters, String& mimeType, String& fileNameExtension)
    at Microsoft.Reporting.WebForms.ServerModeSession.RenderReport(String format, Boolean allowInternalRenderers, String deviceInfo, NameValueCollection additionalParams, Boolean cacheSecondaryStreamsForHtml, String& mimeType, String& fileExtension)
    at Microsoft.Reporting.WebForms.ExportOperation.PerformOperation(NameValueCollection urlQuery, HttpResponse response)
    at Microsoft.Reporting.WebForms.HttpHandler.ProcessRequest(HttpContext context)
    at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
    at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
    It works locally (developer machine) or having less data. But it didn't work with large data when publish on azure.
    Any help will be appreciated.
    Thanks.

    Sorry, let me clarify my questions as they were ambiguous:
    For a given set if input, does the request always take the same amount of time to fail? How long does it take?
    When it works (e.g. on local machine using same input), how big is the output file that gets downloaded?
    Also, if you can share your site name (directly or
    indirectly), and the UTC time where you made an attempt, we may be able to get more info on our side.

  • Facing error while exporting a table from command prompt.

    Hi Everyone,
    Please see the below error and suggest me what to do? My database is 11g.
    SQL> connect system/manager;
    Connected.
    SQL> expdp scott directory=test_dir dumpfile=scott.dmp tables=emp;
    SP2-0734: unknown command beginning "expdp scot..." - rest of line ignored.Regards,
    BS2012.
    Edited by: BS2012 on Apr 29, 2013 1:57 PM

    BS2012 wrote:
    Hi Jeneesh,
    Thanks for correcting me. I've never done import and export before. if I'll have to do that from sqlplus then what should I write?
    Regards,
    BS2012.Could you explain your business requirements?
    You cannot do export/import as it is from sqlplus...
    You may be able to write pl/sql code using DBMS_DATAPUMP package..
    Explain your requirements, people will be able to help..

Maybe you are looking for