Assessable Value and Wrong Value in SEcess in first row in J1IS

Hi,
This is a scenario of Vendor Return when we are returning multiple excisable materials to Vendor.
I have created Return Delivery using movement type in MIGO with choosing the option Part 1 only.
In J1IS,
The First problem is the assessable value which is coming wrongly as 111.11 whereas the gross value of the material is Rs. 100 only with Excise Duty 10% BED, 2% ECess and 1% SEcess & 2% CST.
The second problem is
The duty values are showing correct in the screen e.g., BED 10, ECS 0.2 and AT1 0.1 (according to gross value 100, 10% BED, 2% ECess and 1% SEcess )
There are total five items with the same gross value and other duties (gross value 100, 10% BED, 2% ECess and 1% SEcess)
But as soon as the transaction is saved, the AT1 value against first row changes wrongly from 0.1 to 0.6 and the same is flowing to the table.
Can any one provide some idea to resolve this?
Thanks in advance

Hi,
Please check my previous reply on this "Get Excise Invoice" problem thro' the link provided below.
Re: J1IS: u2018Get Excise invoiceu2019 not showing any values
Regards,
Siva

Similar Messages

Can anybody tell me how to extract sales value and cost value for an materi

dear all,
Can anybody tell me how to extract sales value and cost value for an material sold .
All the values of cost value and sale values are getting stored in bseg-wrbtr field .
How to identify them uniquely.
Or there is another way to find the sale and cost values.
Regards
Mave

Hi Mave!
Normally there is no condition change, when something is sold.
But sales price depends on sales conditions (not only price, but also surcharges, discounts, taxes - if customized).
Nevertheless, after selling you have a invoice document, where correct values should be stored (see VBRP fields mentioned above). If here is a problem, then customizing of price determination is in question, not a programming of user-exits with MARD selection for costs (or some other tries to get a price).
When you specify your requirements more in detail, you might get better answers - but currently only general hints are possible ('see in invioce / G/L accounts').
Regards,
Christian

APC Value and Plan Value for an Asset.

HI Gurus,
I am developing a report where I have to display the APC value and Plan value of an Asset.Can anyone pls give an insight how to find this for the Asset.

Hi,
why don´t you use the logical database ADA which most of the FI-AA standard reports do? The logical database is a service to get this information without developing all the READ information and translation by yourself, especially when talking about mid-year-reporting, consistence checks, etc..
If you decide to use ADA, then the events GET ANLA0, GET ANLAV and GET ANLCV are from interest for you for information about APC and planned/posted depreciation value.
Regards,
Markus

Excise Value and Freight value should be add to material cost in the depot

Hi,
Can any one help me on my scenario?
We have depot concept my client requirement is excise Value and Freight value should be add to material cost (inventories at depot) in the depot
Thanks & Regards
KMR

Hi All,
In Depot Sale. This are the Excise Duty Passed on to the Customer BED, AED ECS, SHECS, Other then that its added to the material cost. Define a Pricing procedure for value added to the material cost in both Procurement & Sales base your problem will be solved.
Regards,
Pherasath

ABAP program to neutralize 0Unit value and 0quantity value

Hi all,
I'm not expert in ABAP, and i would like implement a small abap program (routine)in my cube.
I would like neutralize the 0UNIT value and 0QUANTITY value only when 0VTYPE = 1 or 2 :
in other words, if 0vtype = 1 or 4 then 0unit = space and 0quantity = 0
b]
Can you tell me please how and where write the ABAP program please ?
Message was edited by:
Pontoise Pontoise
Message was edited by:
Pontoise Pontoise

Hi,
I amnt able to understand your requirement. But the code for which you asked is simple.
If 0vtype = 1 or 0vtype = ' '.
0unit = space.
0quantity = 0.
endif.
Regards
Aneesh.

Report on OA target value and net value

Hi all,
Is there any standard report that can list out the target value and net value of a number of OA? The values are similar to ME33K -> Header -> Statistics -> General. Thanks.

Thanks all. I had found the answer. It should be transaction ME3L, change layout to select "Released value" and mark the column to show total value.

Net value and assesable value

Dear Experts,
In Import pricing procedure we different pricing condition like
1.PACKING AND FORWARDING
2. SUPPLIER INSURANCE
3. OCCAN/ AIR FRIGHT CHARGES
4.IMPORT INSURANCE
5. LANDING CHARGES
to obtain NET VALUE which are pricing condiion value has to added
Please tell me what is difference between Net VALUE and ASSESABLE VALUE,
THIS

Hi,
Net value is basic material price with includes all delivery cost & fright.
Asseable value is
Basic price (% of material value) depent on product & chapter ID. (Custom will provide abetment for product)
Fright (Import)
Insurence cost
Landing cost 1%
SAM
Edited by: Saminathan Gopalan on Jun 9, 2010 4:19 PM

Urgent! Display lookup value and return value at the same time.

We are using pop up lov.
How can we display lookup value and return value at the same time. let me claer..
Our lov query is like fallowing
select dname, deptno from dept
we want to return deptno column into a database bind text item and dname column into a display item (look up)
can we do it (we need to do)
thanks for your help.

We did it .
But pop up key lov (display description return value ) property doesn't appear for tabular forms item.
(Report Attributes pages Tabular Form Element section display As property list)
can we set or not.
Thank you.

Integer values and decimal values in weblient UI - Display mode

Hello,
i have developed an custom assignmentblock with some custom fields.
Some of this fields are integer values and text values.
Some other fields are decimal values.
I face the issue that this decimal values are in display mode right-aligned all other fields are left-aligned.
In edit mode all values are right-alligned.
How can i change this behaviour? All values left-alligned in display mode!
Otherwise this looks strange.
Thank you
Kind regards
Manfred

Hi,
Decimal values will be displayed right-aligned. To change that you need to modify the GET_M method.
In get_m method, you have to change the attr datatype to string.
Data: attr type string.
Data: dref type ref to data.
Get reference of attr into dref.
Regards,
Arun
Edited by: Arun Kumar on May 14, 2010 3:03 PM

Posted values and unposted values

Hi,
Could anybody please tell me whats posted values and unposted values?
Thanks.

Hi Komalapriya,
I can imaging two scenarios where the word "posted/unposted value" makes sense.
1. If you have a master data value which is not being used in your transaction data, then this master data value in an unposted value.
2. If you have transaction data with empty characteristic values (which are shown as "#" in your reports), then these values could be named unposted values as well.
Kind regards,
Stefan

Standard report which can show the details of Invoice value and PO value

Hi all,
Is there any standard report which can show the details of Invoice value is more than 5% of PO value. MIRO value and PO value.
If any report which caters the maximum requirement is also fine
Regards
Sanjith
Edited by: Sanjith Sethu Lekha on Dec 6, 2011 2:42 PM

Hi
Please refer the below mentioned link
/thread/1789934 [original link is broken]
Regards
Praveen P C

How do I create a 1d array that takes a single calculation and insert the result into the first row and then the next calculation the next time the loop passes that point and puts the results in thsecond row and so on until the loop is exited.

The attached file is work inprogress, with some dummy data sp that I can test it out without having to connect to equipment.
The second tab is the one that I am having the problem with. the output array from the replace element appears to be starting at the index position of 1 rather than 0 but that is ok it is still show that the new data is placed in incrementing element locations. However the main array that I am trying to build that is suppose to take each new calculation and place it in the next index(row) does not ap
pear to be working or at least I am not getting any indication on the inidcator.
Basically what I am attempting to do is is gather some pulses from adevice for a minute, place the results for a calculation, so that it displays then do the same again the next minute, but put these result in the next row and so on until the specifiied time has expired and the loop exits. I need to have all results displayed and keep building the array(display until, the end of the test)Eventually I will have to include a min max section that displays the min and max values calculated, but that should be easy with the min max function.Actually I thought this should have been easy but, I gues I can not see the forest through the trees. Can any one help to slear this up for me.
Attachments:
regulation_tester_7_loops.vi ‏244 KB

I didn't really have time to dig in and understand your program in depth,
but I have a few tips for you that might things a bit easier:
- You use local variables excessively which really complicates things. Try
not to use them and it will make your life easier.
- If you flowchart the design (very similar to a dataflow diagram, keep in
mind!) you want to gather data, calculate a value from that data, store the
calculation in an array, and loop while the time is in a certain range. So
theres really not much need for a sequence as long as you get rid of the
local variables (sequences also complicate things)
- You loop again if timepassed+1 is still less than some constant. Rather
than messing with locals it seems so much easier to use a shiftregister (if
absolutely necessary) or in this case base it upon the number of iterations
of the loop. In this case it looks like "time passed" is the same thing as
the number of loop iterations, but I didn't check closely. There's an i
terminal in your whileloop to read for the number of iterations.
- After having simplified your design by eliminating unnecessary sequence
and local variables, you should be able to draw out the labview diagram.
Don't try to use the "insert into array" vis since theres no need. Each
iteration of your loop calculates a number which goes into the next position
of the array right? Pass your result outside the loop, and enable indexing
on the terminal so Labview automatically generates the array for you. If
your calculation is a function of previous data, then use a shift register
to keep previous values around.
I wish you luck. Post again if you have any questions. Without a more
detailed understanding of your task at hand it's kind of hard to post actual
code suggestions for you.
-joey
"nelsons" wrote in message
news:[email protected]...
> how do I create a 1d array that takes a single calculation and insert
> the result into the first row and then the next calculation the next
> time the loop passes that point and puts the results in thsecond row
> and so on until the loop is exited.
>
> The attached file is work inprogress, with some dummy data sp that I
> can test it out without having to connect to equipment.
> The second tab is the one that I am having the problem with. the
> output array from the replace element appears to be starting at the
> index position of 1 rather than 0 but that is ok it is still show that
> the new data is placed in incrementing element locations. However the
> main array that I am trying to build that is suppose to take each new
> calculation and place it in the next index(row) does not appear to be
> working or at least I am not getting any indication on the inidcator.
>
> Basically what I am attempting to do is is gather some pulses from
> adevice for a minute, place the results for a calculation, so that it
> displays then do the same again the next minute, but put these result
> in the next row and so on until the specifiied time has expired and
> the loop exits. I need to have all results displayed and keep building
> the array(display until, the end of the test)Eventually I will have to
> include a min max section that displays the min and max values
> calculated, but that should be easy with the min max function.Actually
> I thought this should have been easy but, I gues I can not see the
> forest through the trees. Can any one help to slear this up for me.

Webi displays null and wrong values after BW upgraded to SP6

Hi,
Webi report retrieves blank values after BW Backend upgraded to SP6.
We were on SAP EHP 1 for SAP Net Weaver 7.0 and SP4. On the BO side we are on BO XI R/3 FP 2.1.
Once we add new filters to a simple webi query the webi displays the null values for the characteristics which already exist in the report and more ever wrong values displayed for few columns. We have checked the MDX query in BW by using 'MDXTEST' and the results are good.
It looks like that it is a rendering issue in Webi side and exactly no idea...
Can anybody know how to fix the issue or any SAP notes exists for resolving this?
Thank you,
Regards,
Satya

Hi Ingo,
We are also facing the same issue that satya is facing.
We have developed the reports in BO XI 3.1 SP2 FP2.1 and SAP BW 7.01 EHP1 which was running correctly and showing the right result.
But we upgraded the BW system to SAP BW 7.01 SP6 and check the WebI reports which was showing the unexpected results. ( instead of n rows it shows only 1 row for any query without dimension values)
So we upgraded the BO sys to BO XI 3.1 SP2 FP 2.6 and checked the result but no luck with that also.
The workaround i found is i must need to add the Node objects from the universe in the Query which are also used in the query filter of Web Intelligence. But this is not reliable as we need to change all the developed queries.
We have also tried to perform the things shown in the notes but no MDX trace is enabling.
Please let me know if there is any other solution.

Cant able to see new value and old value for change in purchase order text

Hi all ,
I am not able to see changes done in material's purchase order text in material master. When i use tcode MM04 to see changes done material master it does not report new and old value for change if it is done in purchase order text of that material .
Thanks in advance ,
Shikha

Hi Shikha,
I'm not sure it works or not. But you can try SCU3 t.code and table DBTABLOG. May it can help you out.
I also faced this type of issue in Plant data and it get resolved.
Try and let me know...
Regards
Sunil Sisodia

How to create a PDF with substituted key-value and table-values using a template language

I have about 50 key-values and 10 table-values that I want to substitute into a formatted report template (language can be anything standard, would create a small number of these templates) and then use an Adobe tool to substitute the values into the template and produce a PDF. Preferably the template language would permit some basic conditional logic (if <key #> has value <value> then <show key label here> and <key value here> in close spatial proximity on the form) and permit embedding of a static graphic logo, text with fonts/styles, etc. to produce a polished report but also handle pagination (e.g. enable page breaks or numbering) to be handled automatically.
What is a recommended template language and product to accomplish this?

Are you thinking of something like a blank form that you can enter information into, save, and send to another user? If so, what you want is possible. If you want more information, post again and include more details about how you want to use it and how the recipient will use it.

Assessable Value and Wrong Value in SEcess in first row in J1IS

Similar Messages

Maybe you are looking for