Assessable value in RG1 register for IWE classification

Dear Sirs,
We are not getting Assessable value for export issues made from RG1 register under IWE category in j1i5. Is there any solution to bring in assessable values for IWE in RG1 register?
regards,
rahul

Dear Pankaj,
Refer SAP Note: 951955. FAQ for RG1 question number 10.
Content of the same provided below:
===
10. Assessable value is not appearing the RG1 register in transaction J1I5.
Answer: If the scenario has another pricing condition other than PR00 (for example, another price condition exists containing the balance of the PR00 and discount condition) then PR00 has to be maintained as a statistical condition so that the base value will be PR00 minus discount condition, i.e., the second price condition.
===
Value column in RG1 register is updated based on the Condition Type in Pricing Procedure for which setting is as below:
Condition Class: B - Prices
Condition Category: H - Basic Price
Excise Values are updated in RG1 on creation of Excise Invoice
Regards
Rajat

Similar Messages

Error in excise duty values in RG1 register

Dear All,
While extracting the RG1 registers it has been found that values for Basic excise duties, Education cess and SH edu. cess are not appearing properly.
I have verified the following
1. There were 3 deliveries against which 3 separate invoices have been created. Against these 3 invoices, 3 excise invoices have been created. All the inoices are posted to accounting.
2. Sales material as well as sold to and ship to parties are same in all the three invoices.
3. Dispatch location i.e. plant is same for all 3 invoices.
4. In J_1IEXCDTL table EXBAS as well as EXBED, ECS and EXADDTAX1values are appearing properly for all the 3 line items.
But no values are coming for 2 line tiems; whereas correct values are coming in 1 line item in the Excel download as well script for RG1 register.
Please help ASAP.
Thanks & Regards
Piyush

Dear Lakshmipathi,
All the 3 invoices are psoted to accounts. All the 3 excises invoices are also posted to accounts. Duty values are flowing properly.
The problem is in the RG1 register extraction.
BED, ECS and HCS values are displayed for line 1 but it is blank for remaining 2 line items.
Thanks & Regards
Piyush

Rounding off value on RG1 register

Dear Gurus,
When I extracting RG1 register values of duty are not round up.
In logistic genral, Basic setting, Company code setting, I marked the cheakbox for rounding off.
Then also problem is still there.
There are any note for that?
Pls give me soluation.
Thanks & Regards

Dear uday
In LGBasic Settings>Maintain Company Code settings, as you said on the right side, there is a field "Exc Rndg". You would have selected but if you go inside this by clicking the blue lens, you can see two fields under the tab "Rounding Rules". Tick the box for "Rounding duty on Removal". Now retry.
thanks
G. Lakshmipathi

Updation of Excise Base Value in RG1 Register

Dear All,
I have maintained the Condition category as H in Condition Type. But still the Excise Base value is not getting updated in RG1 Register.
Please help me out with the solution.
Thanks
Tanushree

Hi Tanushree,
R u working in Ecc 6.0 or in ZYG?
To update the Excise Base value is in RG1 Register,wat u nid to do is assing Condition category as H.
Thanks
Kapil

Updation of RG1 register for make-to-stock material

Dear Experts,
Will you please guide me how to update the RG1 register in case of sales for make-to-stock materials?
With regards,
Jhelum Roy

Read SAP help documentation [Update of Registers RG 1 and RG 23 (Part I)|http://help.sap.com/saphelp_erp60_sp/helpdata/en/09/ebf138cdd78a4be10000000a114084/frameset.htm]

RG1 register register updation prob for some of the deivery docs.

Dear All,
While updating the RG1 register for classification type IDH,
on simulation system is giving red signal for some of the documents.
Can any one pur some light on this issue.And guide me what i have to do?
I like knwo for which movement type which classification we have to used.
The issue issue is very urgent as we have to submit the register with the excise department.
Thanks in advance.
deepti

Hi shyam,
Did you got the answer for your question if so please tell me the solution since i am also facing same problem.
thanks
Srinivas

Values not Appearing in RG1 Register

Dear All,
When I take a print out of the RG1 Register following coloumns are coming blank pls advice what needs to be done.
1) On Payment of duty
    Quantity
    Value
2) Without Payment of Duty
    For Export
    To other factories
    For Other Purpose
3) Duty
    BED Rate
    BED
    ECS
    SECS
4) Closing Balance
    Others
Please advice what needs to be done to rectify the error.
Best Regards
Atul Keshav

Hi
   The values in RG1 register will flow only if your J_IEXCHDTL (excise item details table) table EXBAS (excise base value) should be updated. If this is not updated then system will not bring the excise values in RG1 register.
In order to ensure that J_1IEXCHDTL table EXBAS field is updated please mark you pricing condition conditon category as "H'-Basic Price in V/06. By this EXBAS field will be updated with excise base value.
Please note that for already created document system will not update this value.
Regards
MBS

Material form Packed, Loose is maintained for RG1 Register----where?

Pls Suggest me to solve the problem. I want to know where the material form is maintained. P for packed, L for Loose. In RG1 register for Packed material everything is getting reflected in RG1 Register. Whereas for loose material opening balance, Total of opening and manufacture & Closing balance are not getting reflacted in Rg1 register.
I have checked till the date all production & issue are there in J_1IRG1 table after J1I5. After extracting the thru J2I5 only packed material is getting updated in J_2IRG1BAL table. But not the loose or unspecified material. However my clients need to get packed as well as loose material in RG1 register.
Manually in development client i changed the Losse or unspecified material as Packed by direct table entry in J_1IRG1 for testing. After doing the same when i extract the data thru J2I5, everything is coming in J_2IRG1BAL table. And getting reflected in RG1 register.
Now I have to change the Loose material as Packed material. So my problem will be solved. That is my objective.
Pls tell me how to do the change. Is any config setting or assignment?
Its urgent.
NB: helpfull answer will be awarded.
Regards
Srimanta
Edited by: Srimanta De on Jun 25, 2008 11:46 AM

Srimanta,
for better and quick reply post this thread in MM section.
Amit.

Export RG1 Register Updation

Dear Expert,
i want to update RG1 Register for Export process.
when i want to update? whether after ARE1 Creation or Before ARE1 Creation.
Thanks for advance

HI
You can Extract,Update and print the PG1 register after creating the Excise Invoice even domestic or Exports.
There is no hard and fast rule with regards to updation of registers with ARE1 or ARE3.
Use the Classification type IWE as classification type
regards
Prashanth

RG1 register flow in SAP

Hi friends,
I would like to know the complete flow for RG1 i.e. update,extraction, mvt type I should use, legends meanings(green/red) etc. Would anybody can contribute.
Thanks & Best Regards,
Atul

Hi Atul,
Normally RG1 register is updated 2 times'
1) when production of fineshed product is produced and transferred to Bonded storage location. Movement type - 101
2) When Material is dispatched to customer, movement type - 601 or 641 for STO
Steps are ................
1. Update RG 1 = Tcode is J1I5, enter require data and select proper classification.
in register tab select RG 1 register
First we update the RG1 register for Production of Fineshed Product with classification RMA
Next update is for Dispatch Material to Customer with Classification IDH
2. Extract RG 1 = T code J2I5, enter require data and select RG1 Register
3. Print RG 1 = T Code is J2I6, select RG1 and Execute.
If you are issuing material from RG1 (Taking Classification IDH) and u dont have stock in RG1 then u get Red Mark and if issuing entry has passed successfully then u will get Green Mark.
Regards,
PM

RegardinG RG1 register

Dear All
Dear All
My client requirement is like they have two plant with same excise registration number & want single RG1 register for both the plant.
Is this scenario possible in SAP & what are the steps?

Hi
This is not possible in Non SAP even, check with them how they are managing stock in two different plant on same time.This is legal requirement you can have different process for different client. Across the same it should be same as per Legal requirement.
SAP will help you the same business which is there as per Legal in Non SAP.
Rgs

RG1 Register : opening & closing balance does not match with actual Stock

Hi
I am working on SAP AFS 6.0.
The RG1 register for a particular month displays data of only those materials which have been transacted in that month. I checked the tables J_1IRG1 and J_2IRG1BAL found that system retrives all records of the given period from the table J_1IRG1 and picks opening balance of these records from the table J_2IRG1BAL. The records of those materials which have closing balance in J_2IRG1BAL but was not transacted in the given period are not considered in RG1 register.
I want RG1 register to show opening balance of all materials which have closing balance in J_2IRG1BAL but have not been transacted in the subsequent periods.
Regards
Niraj

HI
Yes it is mandatory to update the table J_2IRG1BAL with material form and opening stock etc. for all the new materials
EXGRP: Excise group of the material
DATUM: Date from which you want RG1 report i.e. 01.01.2004
MATNR: Material
FORM: P for packed, L for loose. note that the same material cannot be maintained as both packed and loose.
WERKS: Leave it blank
Maintain all relevant opening balance fields. These fields start with OP
Note 951955 - CIN: General clarifications for RG1 goods*
check the above note
regards
Prashanth

Excise - RG1 register reset

Hello,
We went live on SAP 4 years back, we used the RG1 register for a few days, however the users being naive to the system stopped using it. Now there is a proposal to start using the RG1 register from SAP from the current financial year.
I understand that the following tables need to be reset:-
J_1IRG1
J_1IRGSUM
J_2IRG1BAL
but can someone throw light on how the tables i.e. which fields are to be updated in these tables? Also, do we need to delete the previous entries in the tables?
thank you for your help,
with regards,
Hussain

Hi,
Please refer the note- 951955 for the data to be updated in J_2IRG1BAL table.
J_1IRGSUM table should be updated with initial stock if any under column ***_receipt qty.
J_1IRG1 gets updated when you run J1I5.
Regards,
Brinda

Excise duties values not appearing in the RG1 register

Dear All
After updation of RG1 register and extraction of the same on checking the entries in the table J_1IRG1 we are not getting the BED ,Ecess and SECS.In printing of this register the same values are not appearing.
Further this register is around 524 pages.It is showing per transection.How can we redure no of pages.
Please guide in this matter.
deepti

hi,
once again check
1.Tcode: J1id
2.Tcode:J1iex
here see part1 created or not check it.
3. Tcode:J1i5 update register
4. Check condi.types for SH
is not fine pls revert back
regards
ka

Different material description for RG1 register

Dear Experts,
I have a client requirement for change in material description (materialmaster) to a different description.
The description maintained in material master is for viz
SS CT BT 200mm-123-093MKO
But excise need description
SS BILLET
Where to maintain this additional description in material master and fetch the same for RG1 register.
Let me know any stranded user exit is available. If the above case is possible than also let me know what would be the bad implications on processes (like stock will not match with description).
Regards,
RB
Edited by: RB on Feb 26, 2009 6:18 PM

you either create a quickview by joining MARC and MAKT tables for this.
or much easier. you press F4 in a material number field.
then you go to search help W plant material.
there you erase the language from the selection pop-up and execute
in the hitlist do a right mouse click and you can directly download

Assessable value in RG1 register for IWE classification

Similar Messages

Maybe you are looking for