Assessment of New GL

Hi,
I am trying to run assessment cycle for new GL with transaction code FAGLGA15. In assessment cycle master I have maintained sender rule as posted amount and receiver rule as fixed percentage.
Formal cycle check is successful. I have check all the settings are properly maintained. Data are available in the acount element/ cost element, but getting error as "No senders were found for cycle "
When I am changing the sender rule to Fixed rate leaving other setting as it is. Cycle run successfully and posting data.
Please provide solution if any one knows.
With Regards,
Tushar

Hello
pl check the sender values are existing or not because this type of error i have faced in my testing.
check sender values are relevant to the company code or controlling area in which u are going to do the transaction. If every thing is correct, check any validation or substituions or existing.
I hope it will be helpful to clarify your doubt.
Regards
Madhav

Similar Messages

Cost center assessment in new GL and classic GL

HI ALL
I want to double check one thing. When you run cost center assessments in classic GL, the system will make entries in GLPCT table for PCA with assessment cost element. But when you got migrated into NEW GL then system will not make any entry in FAGLFLEXT table with assessment cost element. These assesments have no effect on PCA module. If I want to reflect the effect of costcenter assesments in PCA in new GL , where can I check for that?....Is there anyway to acheive this without activating both classic and new gl PCA?
Thanks
Steve

Hi,
If you have defined variant for real time integration and it has "Cross profit center" checked and this variant is assigned to company code, then FI-CO reconcilation posting will be posted in each of the profit center.
One can have a single account for all reconcilation posting or different FI-CO recon account can be used for each bussiness process / for each assessement cost element using substitution.
FI-CO reco account is visible in the FAGLFLEXT and hence can be displayed in report.
Regards
Chetan.

Checklist of things a new DBA should assess at new job...

Hi,
I am currently studying Oracle and wish to become an Oracle DBA in the near future, hopefully. I haven't had the chance to actually be able to see a DBA in action in a real production environment, but I am very interested in Oracle and would love to see it all as a whole at a real company. I was told that sometimes it is easier to be able to create your own database than take over an existing database that may have been configured incorrectly. I would like to know what are the most important parts that a DBA should check within an existing database at a new job. Thanks in advance for your much appreciated advise!

WizKid06 wrote:
So would that basically be the most important thing I should first, and then just start my own performance tuning, monitoring, disaster recovery planning, etc and worry about alerts as they come? I tend to over-analyze at times lol
If you can't recover a database from backup, nothing else you can do really matters. The very future and existence of your company could very well depend on it. The Prime Directive of a DBA is to insure you have good, usable backups, and know how to use them in any conceivable data/database loss scenario.

Cost Center Assessment - cost element type 42

Hi dear All,
I got issues running KSU5 to allocate planned costs under cost element type 42. we were expecting that all planned costs (primary and secondary(cost element type 42)) could be allocated by credit cost center (actual). only primary costs are being allocated.
Scenario:
cost center planning (kp06) 1000 currencies in primary cost element in cost center A
running planning assessment - KSUB: cycle uses assessment cost element (type 42): sender cost center A, receiver cost center B (all planned values). assessment cyles posts 1000 currencies from CC A to cost center B
planning in cost center B (primary cost elements through kp06, 500 currencies) total planning 1000 from previous assessment with CE type 42, and 500 from cc planning in a primari CE.
by the period end closing, tcode KSU5 (allocation actual) is running. new cycle created, based on planned values (origini not actual, but planned amounts).
we were expecting to allocate 1500 currencies from cost center B to cost center C (using 100% and through assessment cost element)).
result: credit actual cost center B = 500 currencies debit actual cost center C = 500 currencies.
1000 currencies pending on cost center B (planned).
do you know why SAP is not allocating the 1000? even if those 1000 were planned in cost center B by assessement, a new allocation cycle should be able to post them or not?
thank you for your outcome.

Hi dear Ajay, thank you for your answer.
first, I understand the difference between KSUB and KSU5, in the defined scenario, we have both. planned values, become actual with the MEC activities. business definition.
regarding the cycle, I have setup assessment cost element so we can get all planned lines posted as 1.
On sender tab I have only the cost center. no cost element defined.
receiver its cost center.
furthermore, i've not setup allocation structure, so all cost elements should be allow, there is no restriction on this.
the only difference is: planned costs which their origin is already an assessment are not being assessed again.
I can show you the print screens with cycles setup if it helps
best regards
MF

Can't connect new version of iTunes to iTunes Store through the internet?

Dear all users,
Problem to assess the new version(12.0.1.26)iTunes to iTunes/App Store by internet?Only show error box(occur unknown error,please try again)!
Do anyone help me to fix this?I've re-installed many times!
rgds,
Sands_Monster

Hi there Sands_monster,
You may find the troubleshooting steps in the article below helpful if you are unable to connect to the iTunes Store.
Can't connect to the iTunes Store
-Griff W.

Conducting a Site Survey

Does anyone where I can find a site survey checklist for installing a network infrastructure?
I'm looking for something to document when assessing a new office location to setup a network for a small business.

I have jotted down a few of the important things that need to be considered for setting up a network infrastructure.
The following questions must be answered regarding installation site readiness:
1. Are there any special site considerations (this can include using specific building entrances,
security check points, reception desks, etc)
2. Are all the original console and auxiliary cables, interface adaptors and rack mounting hardware
available if necessary?
3. Where is the equipment physically being installed? In a rack or on a table?
4. Is the necessary power available?
5. Is the WAN circuit installed and connection ready for the installation (i.e. - CSU/DSU installed
and configured, frame-relay active, etc.)?
6. Is the LAN connection available and ready for installation?
7. Is there an analog phone line within 50 feet of the installation location for dial up access?
8. Are the cables you have received of the correct length and presentation for the LAN and WAN
connectivity for your site?
9. Have the relevant TELCO lines been installed and working?

Can you still access a CC trial version if you have previously trial another CC program?

I Teach InDesign at a college that has CS4 installed and, before CC, would suggest to students they download the InDesign trial to try the latest version. Some them have already downloaded trials of other CC programs. Is it possible for them still to access InDesign CC?

GautamBahl wrote:
If they have not used Indesign CC trial for 30 days then they can use the trial version.
Thanks
Hi GautamBahl
Does that apply to Photoshop CC as well ?.
I downed the trial version (14.0 I think) last year. At least two new versions (14.1.2 and 14.2.1) of Photoshop CC have been released since. Obviously I have not used the trial in the last 30 day, is it permissible to download the trial again to assess the new feature that have been added ?.

Apply for a Job

Hi
I am assessing the "new" version of Apply for a Job to see whether it will achieve the requirements of a customer who is not ready to pursue the iRecruitment.
When I apply for a job as an employee I uploaded a resume. Now, acting as the recruiter I want to be able to see that resume. I checked within the core app against the employee's application record and there was nothing visible. Can anyone tell me where this file is stored?
Any ideas?
Thanks
Peta

Start here:
http://www.apple.com/jobs/uk/

Why is Siri not available on the Ipad 2?

Why is Siri not available on the Ipad 2?

Only Apple could tell you that definitively.
Make your own assessment.
http://news.cnet.com/8301-30685_3-57371624-264/why-apples-a5-is-so-big-and-iphon e-4-wont-get-siri/

ESS Address service for international employees.

Hello All,
We recently upgraded from 4.6c to ECC5.0 as part of this we upgraded our portal from ITS to webdynpro. We have ESS for US employees only. There is a employee who moved from Singapore to US. He is unable to update the address to US, So I updated the address in the SAP system from PA30 to US address. But the user when loggin in is still seeing the same error. The error details are as follows. Can anyone please help, this is very urgent!!!! This employee is one of the directors.
Error log:
Critical Error:
Invalid partial field access: Length too large, error key: RFC_ERROR_SYSTEM_FAILURE .
com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Invalid partial field access: Length too large, error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
     at com.sap.xss.hr.per.us.address.fc.FcPerAddressUS.readRecord(FcPerAddressUS.java:242)
     at com.sap.xss.hr.per.us.address.fc.wdp.InternalFcPerAddressUS.readRecord(InternalFcPerAddressUS.java:604)
     at com.sap.xss.hr.per.us.address.fc.FcPerAddressUSInterface.readRecord(FcPerAddressUSInterface.java:150)
     at com.sap.xss.hr.per.us.address.fc.wdp.InternalFcPerAddressUSInterface.readRecord(InternalFcPerAddressUSInterface.java:229)
     at com.sap.xss.hr.per.us.address.fc.wdp.InternalFcPerAddressUSInterface$External.readRecord(InternalFcPerAddressUSInterface.java:305)
     at com.sap.xss.hr.per.us.address.overview.VcPerAddressUSOverview.onBeforeOutput(VcPerAddressUSOverview.java:239)
     at com.sap.xss.hr.per.us.address.overview.wdp.InternalVcPerAddressUSOverview.onBeforeOutput(InternalVcPerAddressUSOverview.java:264)
     at com.sap.xss.hr.per.us.address.overview.VcPerAddressUSOverviewInterface.onBeforeOutput(VcPerAddressUSOverviewInterface.java:158)
     at com.sap.xss.hr.per.us.address.overview.wdp.InternalVcPerAddressUSOverviewInterface.onBeforeOutput(InternalVcPerAddressUSOverviewInterface.java:140)
     at com.sap.xss.hr.per.us.address.overview.wdp.InternalVcPerAddressUSOverviewInterface$External.onBeforeOutput(InternalVcPerAddressUSOverviewInterface.java:224)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.callOnBeforeOutput(FPMComponent.java:503)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:471)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:354)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:179)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:95)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:347)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:382)
     at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:618)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
     at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:251)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:48)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.aii.proxy.framework.core.BaseProxyException: Invalid partial field access: Length too large, error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
     at com.sap.xss.hr.per.us.address.model.HRXSS_PER_P0006_US.hrxss_Per_Read_P0006_Us(HRXSS_PER_P0006_US.java:302)
     at com.sap.xss.hr.per.us.address.model.Hrxss_Per_Read_P0006_Us_Input.doExecute(Hrxss_Per_Read_P0006_Us_Input.java:137)
Message was edited by:
        chakri somisetti
Message was edited by:
        chakri somisetti

Hi,
following are the processes which can be done from manager.
Absence Days ,
Accounting ,
Appraisals
Approve Plan
Approve Time by Manager
Attendance Overview
Change Plan for Employee
Communication
Company Property
Compensation
Compensation Additional Link Sample
Cost Distribution
Cost Distribution
Create New Candidate Assessment
Create New Requisition Request
Create Plan for Employee
Data Tracking
Dependents
Display Plan
Display Process Details
Employee Group
Employee Search
Entries
General Data
General Description
HCM Process Overview
Holders
HRAS Process
Illness Costs
Illness Rate
Leavers
Long-Term Incentives
Long-Term Incentives
LPA Reporting
Message Box
Monitoring of Tasks
Monitoring of Tasks
Open Processes
Organizational Assignment
OrgChart Tester
Overtime Costs
Overtime Rate
PCR Direct Launch
Performance Management Document
Personal Data
Personnel Change Request
Photo
Photo
Planning Transfer
Position Description
Position Requirements
Position Search
Private Address
Process Overview
Profile Matchup
Qualification Details
Qualifications
Qualifications
Recruiting Questionnaire BSP
Recruiting Requisition: Status Overview
Recruiting: Candidate Status Overview
Related Activities
Display Personnel File)
Related Activities Launcher (Search Processes)
Related Activities Launcher (Start Processes)
Reminder of Dates
Reporting
Reporting BW
Reporting CR
Reporting IAC
Requirements
Salary Data
Salary Data
Salary Development
Start Processes
Status Overview
Status Overview for Personnel Change Requests
Team Calendar
Training Activities
Training Event Details
Vacancy
Working Time
Working Time
for more information log in the system with the super user goto
Content Administration -> Portal Content -> Content Provided by SAP -> line_manager -> Manager Self-Service

Set where on screen swing appears

I have four different swing views and I want them to appear along side each other. Instead they appear under each other.
Please can someone help

This is everything I have. There are seven diff files here
Please help
import java.awt.*;
import javax.swing.*;
import java.awt.event.*;
import java.util.*;
class MyController1 extends JFrame{
/// the code below initilises all the variables
private Container pane ;
private JButton getResults;
private JLabel marks,weight,empty1,empty2, cw1L, cw2L, examL, cw1wL, cw2wL,ccwL, examwL, modnL;
private JTextField cw1, cw2, exam, cw1w, cw2w,cww, examw;
private Assessment calc;
private JComboBox module;
private String[] modname = {"Select a module...","ISD", "OOSAD", "Databases","Man Fin"};
private JMenuBar bar;
private JMenu fileMenu;
private JMenuItem aboutItem, exitItem;
public MyController1(Assessment c){
     super("Module Mark Calculator.... By Jonny McAllister"); // the heading that is displayed in the Swing
               /// this sets variables to select values
     pane = this.getContentPane();
     module = new JComboBox(modname);
     module.setSelectedIndex(0);
     bar = new JMenuBar();
     this.setJMenuBar(bar);
     fileMenu = new JMenu("File");
     fileMenu.setMnemonic('F');
     bar.add(fileMenu);
     aboutItem = new JMenuItem("About...");
     aboutItem.setMnemonic('A');
     fileMenu.add(aboutItem);
     exitItem = new JMenuItem("Exit");
     exitItem.setMnemonic('x');
     fileMenu.add(exitItem);
     getResults = new JButton("Get Results");
     marks = new JLabel("Marks");
     weight = new JLabel("Weighting");
     empty1 = new JLabel("");
     empty2 = new JLabel("");
     modnL = new JLabel("Module name");
     cw1L = new JLabel("Cw 1 mark");
     cw2L = new JLabel("Cw 2 mark");
     examL = new JLabel("Exam mark");
     cw1wL = new JLabel("Cw1 weighting");
     cw2wL = new JLabel("Cw2 weighting");
     ccwL = new JLabel("Combined Cw weighting");
     examwL = new JLabel("Exam weighting");
     cw1 = new JTextField(3);
     cw2 = new JTextField(3);
     exam = new JTextField(3);
     cw1w = new JTextField(3);
     cw2w = new JTextField(3);
     cww = new JTextField(3);
     examw = new JTextField(3);
                    JPanel panel1 = new JPanel();
                    JPanel panel2 = new JPanel();
                         calc =c;
          /// below is the code for the layout of the swing
          pane.setLayout(new BorderLayout(1,2));
          panel1.setLayout(new GridLayout(5,2)); //sets panel size
          panel1.setBackground(Color.cyan);          //sets the backgrount colour of panel 1
          panel2.setLayout(new GridLayout(5,2)); //sets panel size
          panel2.setBackground(Color.green);          //sets the backgrount colour of panel 2
          pane.add(getResults, BorderLayout.SOUTH); // sets button to the bottom
          pane.add(panel1, BorderLayout.WEST); // sets panel1 to the right IE WEST
          pane.add(panel2, BorderLayout.EAST); // sets panel2 to the left IE EAST
          /// below adds all the variables etc to the panels indicated
          panel1.add(marks);
          panel1.add(empty1);
          panel1.add(modnL);
          panel1.add(module);
          panel1.add(cw1L);
          panel1.add(cw1);
          panel1.add(cw2L);
          panel1.add(cw2);
          panel1.add(examL);
     panel1.add(exam);
          panel2.add(weight);
          panel2.add(empty2);
          panel2.add(cw1wL);
          panel2.add(cw1w);
          panel2.add(cw2wL);
          panel2.add(cw2w);
          panel2.add(ccwL);
          panel2.add(cww);
          panel2.add(examwL);
panel2.add(examw);
          //creates the about handler
          AboutHandler explain = new AboutHandler();
          aboutItem.addActionListener(explain);
          //creates the module listener
ModuleListener combolistener = new ModuleListener();
module.addActionListener(combolistener);
          //creates the window quitter
          WindowQuitter exits = new WindowQuitter();
          exitItem.addActionListener(exits);
          //creates button listener
          ButtonListener blistener = new ButtonListener();
          //creates the quit function
          Terminator quit = new Terminator();
          //adds button to listener
          getResults.addActionListener(blistener);
     this.addWindowListener(quit);
     this.pack();
     this.show();
//start of button listener class
class ButtonListener implements ActionListener {
     public void actionPerformed(ActionEvent e){
if(e.getActionCommand().equals("Get Results")){
     // sets the values entered in the fields
calc.setSecondNum(new Integer(cw1.getText()).intValue());
calc.setThirdNum(new Integer(cw2.getText()).intValue());
     calc.setFourthNum(new Integer(exam.getText()).intValue());
     calc.setFifthNum(new Integer(cw1w.getText()).intValue());
     calc.setSixthNum(new Integer(cw2w.getText()).intValue());
     calc.setSeventhNum(new Integer(cww.getText()).intValue());
     calc.setEigthNum(new Integer(examw.getText()).intValue());
     calc.calculateOverallCwkGrade();
     calc.calculateModuleGrade();
} //end of ButtonListener class
// start of abouthandler class
class AboutHandler implements ActionListener{
          public void actionPerformed(ActionEvent e){
               JOptionPane.showMessageDialog
(null, "This program shows a pass or fail for a module. This program was Written by Jonny McAllister",
               "About", JOptionPane.PLAIN_MESSAGE);
     }// end of about listener class
     // start of windowquitter class
     class WindowQuitter implements ActionListener {
     public void actionPerformed(ActionEvent quit){
                    System.exit(0);
} // end of windowquitter class
// start of moduleListener class
class ModuleListener implements ActionListener
     public void actionPerformed(ActionEvent e)
          JComboBox cb = (JComboBox)e.getSource();
          String moduleSelected = (String)cb.getSelectedItem();
          calc.setFirstNum(moduleSelected);
}// end of modulelistener class
} //end of class MyController1
import java.util.*;
import java.awt.*;
import javax.swing.*;
import java.awt.event.*;
class Manager{
public static void main(String[] args) {
          Assessment am = new Assessment();
          MyView1 V1 = new MyView1();
          MyView2 V2 = new MyView2();
          MyView3 V3 = new MyView3();
          am.addObserver(V1);
          am.addObserver(V2);
          am.addObserver(V3);
          MyController1 controler = new MyController1(am);
import java.util.*;
class Assessment extends Observable{
     private int fstCwM, sndCwM, examM, cwM, modM, fstCwW, sndCwW, overallCwW, examW;
     private String module;
     public Assessment(){
          super();
     public void setFirstNum(String one){
          if(one!="Select a module...")
               module = one;
     public void setSecondNum(int two){fstCwM = two;}
     public void setThirdNum(int three){sndCwM = three;}
     public void setFourthNum(int four){examM = four;}
     public void setFifthNum(int five){fstCwW = five;}
     public void setSixthNum(int six){sndCwW = six;}
     public void setSeventhNum(int seven){overallCwW = seven;}
     public void setEigthNum(int eight){examW = eight;}
     public void calculateOverallCwkGrade()
          cwM=(int)((((double)
          fstCwM*(double)
          fstCwW)/100)+(((double)
          sndCwM*(double)
          sndCwW)/100));
     setChanged();
               notifyObservers();
     //method to calculate overall module grade
     public void calculateModuleGrade()
          modM=(int)((((double)
          cwM*(double)
          overallCwW)/100)+(((double)
          examM*(double)
          examW)/100));
          setChanged();
          notifyObservers();
     public double getCwkGrade(){return cwM;}
               //method to get overall module grade
               public double getModuleMark(){return modM;}
          //method to get Module name
               public String getModule(){return module;}
     public boolean studentPassed()
               if(cwM>=35 && examM>=35)
               if(modM>=40){return true;}
               else{return false;}
               else{return false;}
}     //end of class Assessment
import java.util.*;
import java.awt.*;
import javax.swing.*;
import java.awt.event.*;
class MyView1 extends JFrame implements Observer{
private Container pane ;
private JLabel resultLabel, output;
private Assessment m;
public MyView1(){
     super("Coursework Mark");
          pane = this.getContentPane();
          resultLabel = new JLabel("Mark");
          output = new JLabel(" ");
//          image = new JLabel(new ImageIcon("images/blank.jpg"));
          pane.setLayout(new GridLayout(1,3));
          pane.add(resultLabel);
          pane.add(output);
//          pane.add(image);
          Terminator quit = new Terminator();
          this.addWindowListener(quit);
          this.pack();
          this.show();
public void update(Observable o, Object arg){
          m = (Assessment)o;
     output.setText(String.valueOf(m.getCwkGrade()));
import java.util.*;
import java.awt.*;
import javax.swing.*;
import java.awt.event.*;
class MyView1 extends JFrame implements Observer{
private Container pane ;
private JLabel resultLabel, output;
private Assessment m;
public MyView1(){
     super("Coursework Mark");
          pane = this.getContentPane();
          resultLabel = new JLabel("Mark");
          output = new JLabel(" ");
//          image = new JLabel(new ImageIcon("images/blank.jpg"));
          pane.setLayout(new GridLayout(1,3));
          pane.add(resultLabel);
          pane.add(output);
//          pane.add(image);
          Terminator quit = new Terminator();
          this.addWindowListener(quit);
          this.pack();
          this.show();
public void update(Observable o, Object arg){
          m = (Assessment)o;
     output.setText(String.valueOf(m.getCwkGrade()));
import java.util.*;
import java.awt.*;
import javax.swing.*;
import java.awt.event.*;
class MyView3 extends JFrame implements Observer{
private Container pane ;
private JLabel course, output;
private Assessment m;
private String mark;
public MyView3(){
     super("Pass / Fail");
          pane = this.getContentPane();
          output = new JLabel(" ");
          course = new JLabel(" ");
          // image = new JLabel(new ImageIcon("images/blank.jpg"));
          pane.setLayout(new GridLayout(1,3));
          pane.add(output);
          pane.add(course);
          // pane.add(image);
          Terminator quit = new Terminator();
          this.addWindowListener(quit);
          this.pack();
          this.show();
public void update(Observable o, Object arg){
          m = (Assessment)o;
          if(m.studentPassed()==true)
               mark ="Passed";
               else
               mark = "Failed";
     output.setText(mark);
     // image.setIcon("images"+mark+".jpg");
     course.setText(m.getModule());
} //end of class MyView3
import java.util.*;
import java.awt.*;
import javax.swing.*;
import java.awt.event.*;
class Terminator extends WindowAdapter{
     public void windowClosing(WindowEvent e){
          System.exit(0);

New GL Assessment Run Issue

We use New GL (ECC 6.0 EHP 3) and real time CO-FI integration/ posting have been activated. I ran Assessment Cycle for allocating primary CE data in sender cost center to secondary CE's in receiver cost centers. The program works fine. However I note that it creates new FI GL account postings. We do not want FI GL postings to be created for running assessment cycle. I went thru AC 210 training document which says that segment characteristics has to have zero balance according to customizing 'clearing line items are created' automatically to achieve a zero balance for each segment. Where do I get to see this customizing setting? Can any one please advise? Or can any one advise any solution for running assessment cycle which should not create new FI GL postings.

To create a rule for this use t-code (KALK). Menu path Financial accounting - Financial accounting global settings - Ledger - Realtime integration of controlling with financial accounting - Define rules for selecting CO line items. Once your rule is created assign it to the real-time integration variant.
If you decided to use a badi instead, the name of the badi is FAGL_COFI_LNITEM_SEL.
Also, just to make sure this is clear, the settings associated with the real-time CO-FI intergration variant only effect postings that originate from CO (i.e assessments, distributions, overhead allocations, activity type allocations, etc). I think you may be concerned that if you unclicked some of the checkboxes that this would impact document splitting. It will not. Any FI posting that requires a balanced amount per characteristic will still generate a clearing postings regardless of the settings here. So you only need to create this rule or badi if you want some CO postings to create FI documents and others that don't (i.e. assessment no, activity allocations yes).
thanks,
Edited by: rback59 on May 5, 2010 1:28 PM

Use Assessment Cycles in New GL.

Hello,
I have come across a strange thing in SAP.
I am creating assessment cycle in the New GL.
1. I am trying to enter Account Number and Profit Centre.
My Sender Account Number ####### (please note that I am entering symbols and not the number) and Profit centre $$$$$$$ (please note that I am entering the symbols mentioned and not the exact profit centre which are created in system)
Now when i try to save this cycle it gets saved.
My question is, why SAP is not checking the master data in the assessment cycle? The cycle is getting saved with the master data which is not at all avaiable in the system.
2. In the New GL Allocation, there is a field called assessment account similar to assessment cost element in CO. Do we need to created a separate assessment account in FI also as we do in CO?
Appreciate your inputs.
Regards,
MG

Hi
My question is, why SAP is not checking the master data in the assessment cycle? The cycle is getting saved with the master data which is not at all avaiable in the system.
Sol: Yes. Default system is behaving like this. System wont check whether master data exisit or not.
System wont check any master record like cost center, cost element, WBS etc

Ading new customised field in Assessment

Hi,
I have created one customised field through transaction code OXK3. This field is for location. We used this field with the combination of cost center or profit center so that number of profit center & cost center is reduced as the same structure of cost & profit center is repeated 8-9 times for location purpose.
Now the question is when we do the allocation of common cost through assessment / distribution. This location field is not there.
So I will not be able to make use of this field & allocation will be incorrect.
Is there any way out for this. Can we add one field as sender & receiver in assessment cycle screen .
Regards,
Abhijit Joshi

hi,
Can i know which development class it is used to create new field.
S.Subbiah.

Run PCA Assessment Cycle under New GL

I'm on ECC6.0, and I'm trying to run PCA assessment cycle using FAGLGA15, I've created the PCA assessment cycle. But I got the warning message saying " no valid sender found", I checked table FAGLFLEXA, the sender profit center has values which I posted through FB50 , anybody has encountered the same issue?
please advise.

Hi,
In NewGL, all actual data is saved under version '1' by system design. You can see this in FAGLFLEXT-RVERS.
Kyoko

Assessment of New GL

Similar Messages

Maybe you are looking for