Assessment - Planning Page will not show in Custom MSS Role

I have gone through the Notes/Docs for setting up OBN for Performance Management and have implemented the same.
Now if I go to the Standard MSS role and try to open up Assessment > Click on 'Create' for Succession Planning, it works fine by showing up the Talent Assessment window where it can be completed.
Now, we have a custom MSS role copied from the standard one and I have included the same Talent Management workset (with the page, folder inside - just like the standard role).
But when I try the same scenario as above (Z_Manager_role > Talent Management > Assessment (from Service Map) > Click on Create under Succession Planning), I get the following error.
There is no iView available for system "SAP_ERP_HumanResources": object "employee". For more information, contact your administrator.
Why would it work on the standard role and not the copy? Any directions highly appreciated.
FYI. We are on 7.01 SP8, SAP_MSS  600 SP18
Thanks,
BR
Edited by: BR on Oct 5, 2011 12:38 PM
Edited by: BR on Oct 5, 2011 12:39 PM

Thanks Sidharth.
Sorry for not getting back earlier. I had opened a message with SAP. It looks like the problem has to do with Navigation Targets in my custom MSS role - so that is narrowed down now.
The following prerequisite applies: You must include the navigation targets (for the portal pages mentioned below) in your role.
pcd:portal_content/com.sap.pct/line_manager/com.sap.pct.erp.mss.bp_folder/com.sap.pct.erp.mss.14.bp_folder/com.sap.pct.erp.mss.14.pages/com.sap.pct.erp.mss.hcm/com.sap.pct.erp.mss.appraisal_document_wd_ui
pcd:portal_content/com.sap.pct/line_manager/com.sap.pct.erp.mss.bp_folder/com.sap.pct.erp.mss.14.bp_folder/com.sap.pct.erp.mss.14.pages/com.sap.pct.erp.mss.hcm/com.sap.pct.erp.mss.appraisal_document_pmp
How do I include these navigation targets in my custom MSS role? I mean these pages are not part of the role.
Thanks,
BR
Edited by: BR on Oct 14, 2011 11:46 AM

Similar Messages

  • Add Header Footer page will NOT show 100% horizontally

    Using Acobat X ver 10.1.13 on WIN 8.1 - new install
    when trying to use Add Headers Footers , the page will not show the Right side of the HeadersFooters page (pls see image attached) That is as wide as it will go, even on a large external monitor - so you are unable to enter
    information in the other fields.
    TIA
    Doug

    Post a link to the page please. Did you upload the Scripts
    folder? If not,
    then join the THOUSANDS of others who have made the same
    mistake and gotten
    their comeuppance here on this board.... (hint, hint)
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "techmanheffley" <[email protected]> wrote
    in message
    news:g9rumt$p3i$[email protected]..
    > Trying to add a flash file in page. Will not show up on
    website.
    >
    > It works if I do a F12 within dreamweaver (preview in
    browser). But it
    > does not work when I go to my website (tried IE7 and
    Safari)

  • 1 sheet with multiple pages will not show various page numbers

    I'm having a difficult time differentiating between pages and sheets in Numbers. For example, I have 1 sheet with 5 pages. I am inserting page numbers (done, re-done several times after looking through the forum), but each page will not print with a sequential number (ie. 1, 2, 3, 4, 5). Instead, each page is 1. When I scroll over the number "1" on, say, page 3, the number 3 shows up. But unfortunately t will not print with anything but page number 1.

    I am having a problem that is close to this, when I try and preview my site in browser some of the pages show up as a white and gray blocks only.  I can not seem to find any reason or connection to what pages are doing this.  The only page that has a video seems to work fine.  Its almost acting like the links are broken or something.  Any help would be welcomed.
    Thanks
    Mike

  • System Landscape page will not show - still loading

    Hi,
    We have installed EP6.0 after updating SP16 , there are some ivews not showing. When you click system loading then finally we are noat able to see any ivews.
    For example - System administation-system configuration -- then we are not able to see any ivews.
    Some of the other menus are also same.
    We are trying to login as "administrator".
    After that we have created user with admin privilagtes , even no user not able to login into the system
    Ay suggestions for this.
    Thanks,
    Chimsik

    Hi,
    1.Go To System Administration - > Permissions
    Set Permissions for your users for Portal Content and check .
    2.Also check whether you are using FQDN ie abc.company.com instead of IP address.
    3.Also add an entry to c:/Windows/System32/Drivers/etc/host file
    eg: 10.11.22.33  abc.company.com
    Hope it helps.
    Regards,
    venkat

  • The gmail and Dell start up page will not show content. it says a conflict with browser. don't know what that means.

    I'm unable to find what is wrong or how to fix. I also could not view video on websites as per usual but now that seems to be okay again, whether it was something I did or other mystery.

    I don't know if this will work and I know nothing about the BT homehub, but it's worth a shot. Reboot the hub, unplug it for about 30 seconds and then plug it in again. Wait until the hub fully boots ups and then see if the iPad will recognize it.

  • My music page will not show when clicked on?

    Hi im having difficulty to get my ipod to load my music page when clicked on and dont know what to do to fix it? I was wondering if someone would be able to help me.

    Try the following. Usually the first ones works:
    - Reset. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod.

  • The Index page will not show the title with Bookmarking and the Facebook "like" or "share"

    When you utilize the Facebook Like button on your Muse created web pages, it carries the title over (from the Page Properties) and works fine, except for the Index. This also applies to bookmarking pages. When the Facebook like is used (and the sub window for Facebook opens) it is titled “Home” that’s it. When the index page is bookmarked it also says “Home”. Why won’t the whole title be used? Is there any way to correct this?

    Hi,
    Could you please provide the url of the site and let me take a look to your current settings,

  • My facebook page will not load properly just shows the text headings on page no graphics like there should be.

    My facebook page will not load properly just shows the text headings on page no graphics like there should be.

    You can try these steps in case of issues with web pages:
    You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Hold down the Shift key and left-click the Reload button
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (Mac)
    Clear the cache and remove cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • 2013 Custom Web Parts in Page Layouts not showing for users

    Custom Web Parts in Page Layouts not showing for users
    I have created a master page in the root site collection for a subsite I am developing. I created content types and custom page layouts for the pages within the subsite.
    I used the snippet tool in the design manager to create web parts and page field markup which I copied into the custom layout HTML pages in the root site collection. For instance I have an image viewer web part that I place there to serve as a section title.
    The problem is that I can see all these customer layout page parts no problem but my users cannot. This leads me to believe its permissions, I am site owner of both the subsite and root site collection.
    The users that cannot see the web parts are site members of the site and restricted read users on the root site collection (where the layouts are stored).
    What gives I'm finding it hard to understand why a snipet generated web part wouldn't show in all pages created from that layout page.
    Any help would be appreciated, Havent found anything on this issue online. weird.

    It is a permission issue indeed. Fix is simple, make sure you check out the page layout page, then check it back in as published version.
    John Architect

  • Safari 7.0.5 Will not show a pdf. I Can't view, save, download or print a PDF. Just get a black page.

    Safari 7.0.5 Will not show a pdf. I Can't view, save, download or print a PDF. Just get a black page.

    Macintosh HD > Library > Internet Plug-ins
    Look for these two files.
    AdobePDFViewerNPAPI.plugin
    AdobePDFViewer.plugin
    Right click those and select “Move To Trash’.

  • I made a Photo Book in Lightroom 5.5 converted to jpg and tried to upload to Shutterfly. The only page that I had text added in will not show up in the online Book!!  Thanks For Your Help,  Scott

    I Made a Photo Book in Lightroom 5.5 converted to jpg and tried to upload to Shutterfly. The only page that had text added in will not show up in the online Book!!!  Help,  Scott

    There's a whole lot to read in your post, and frankly I have not read it all.
    Having said that, this troubleshooting guide should help:
    http://support.apple.com/kb/TS1538
    In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

  • I have a friend who is not very savvy with computers. He works on a PC. (There may be versions for pc OS versions) I use a Mac-your website will not show the PC pages to me. How can I find the proper URL to embed in a button?

    I have a friend who is not very savvy with computers. He works on a PC. (There may be versions for pc OS versions) I use a Mac-your website will not show the PC pages to me. How can I find the proper URL to embed in a button?

    Try going to the following
    Tools->Web Developer-> Page Source.
    You can also access this by way of keyboard shortcut Ctrl + U
    The View Page Source option is also available via the right-click menu by just right-clicking inside the page window & it will be the penultimate menu item.

  • Help please.. .iweb will not show pages anymore

    have 2 different full sites built and have had no problem in iweb 09.. until now. had moved pages and was publishing back to folder when . . . . it wouldn't publish... then i went to open pages in iweb and it will not show any pages or any site. i can open iweb, but the directory will not come up...
    even tried to restore the application .... no go.... i now have 2 sites and, oh, about 25-plus pages lost somewhere..
    any ideas?
    thanks!

    Welcome to the Apple Discussions. Try the following:
    1 - close iWeb.
    2 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your User/Library/Preferences folder.
    3 - go to your User/Library/Caches/com.apple.iWeb folder and delete the contents.
    4 - reboot.
    5 - launch iWeb and see if there's any improvement.
    If that doesn't help continue:
    6 - move the domain file from your User/Library/Application Support/iWeb folder to the Desktop.
    7 - launch iWeb, create a new test site and save.
    8 - go to the your User/Library/Application Support/iWeb folder and delete the new domain file.
    9 - move your original domain file from the Desktop to the iWeb folder.
    10 - launch iWeb and try again.
    OT

  • I want to purchase an ipad but the program I would use onit the most to access my customer base will not show me the full screen and I can not side it over to show the rest of the ifo. Tis program will work on the Motorola xoom but thats not what I want .

    I want to use sagefire a company program for entering customer info and billing but the Ipad will not show the entire screen.

    Embie wrote:
    I was told by support that my problem was a hardware problem and that HP would not replace the faulty hardware.  Great.  I will replace my faulty hardware manufacturer.  Simple, HP never again.
    In the hour since you have registered you have posted seven messages, none of which contain any useful information that would allow someone here to help you.  Please read this post then provide some details in a new thread.  What printer model? What operating system? How is the printer connected - USB, wired LAN, Wireless LAN, bluetooth?  What is the problem you are having (with the printer...)?
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • My app store will not show the update page. Any suggestions?

    My app store app will not show the update page. Any suggestions?

    You haven't told us which version of iOS you're running.
    Anyway, is it restricted?  Check Settings > General > Restrictions

Maybe you are looking for

  • File Info Dialog problem

    Hi, Not sure if this is a bug or if I'm just missing a setting someplace. Problem: I write a lengthy caption in the "Description" window of the File Info dialog. Later on I want to use that same caption on a different image. Using CS3 on Windows I ca

  • Report in Excel in Oracle Apps 11i

    Hi every one, Is there any way to fetch the report directly in Excel instead of opening in XML,PDT,TEXT etc. I not not talking about the profile option in which we open the text report into excel. My clients requirement is to open report directly int

  • How to find the First block....in a multi block form

    hi How i can find which is the first block in a multi block form.... ( there are n number of forms with multi blocks...so i need to generalise the code to find the first block in all of the forms) regards Kris

  • Why can I only see my Camera Roll when uploading photos?

    Trying to upload pictures to Facebook but when I click the camera I can only see the camera roll, can't see any of my albums. Any help would be appreciated.

  • MULTIPLE PRINTS FROM MB90 WITHOUT DIALOG BOX

    Hello Friends , I am to take print of goods receipt voucher from MB90 . i have attached my smartform and program their its working fine , but i want to print of all the documents together not indididual , for that i have suppressed the dialog box but