Assessments under FI

Hello Experts
We are using ECC 6.0 with new GL funcitonality.
We are planning to implement the assessment cyles process through General Ledger.
I have created the Assessment Cycle through T.Code FAGLGA11, surprisingly, when choose to SAVE the master data, the system is asking the configuration request.
Is it really a configuration one ? Is there any other T.Code where it is a master data ( like available under Controlling module - assessment cycles)?
Kindly revert
Regards
Anil Kumar

Hello Vivek
Thanks for your reply.
I understand the FAGLGA15 is execution, however the FAGLGA11 also showing under Easy Access screen.
Even under CO, the creation of assessment cycle are not part of configuration i belive.
Regards
Anil

Similar Messages

Talent Analysis Periods

Hello Experts
I have a question regarding the Ehp6 Talent Analysis Periods for Performance/Potential. We are not using the standard functionality to load performance/potential values. We have built a custom program to load 7409/7408 due to specific requirements being different for talent then it is for performance. With that said I'm having issues with the analysis period configuration.
Currently the standard configuration exists in the analysis period table:
Period Group     Period     Description                    Starte Date/End Date Start Day/Month and End Day/Month
SAP_DEF      SAP_JTOD January to December 01/01/2005 12/31/9999 1 January 31 December
The defined group of analysis period being used is SAP_DEF
Even though we are using a program to upload the 7408/7409 vaules I'm having issues with the Define Process Periods and Grouping for my talent assessments which I believe are somehow linked to the Analysis Periods configuration. I have created my forms and the scales for my forms and in the talent assessment area I see "Create" hyperlinks for everyone.
I went through and completed each assessment. I then went into the Define Process Periods and Groups and delimited the current date entires. I created new entries with today's date. What I expected to see was the completed assessments under the assessment Archieve and new "Create" hyperlinks for each of my assessments. However, nothing changed. The assessments were in the same state as I left them..all in "Completed" status.
I'm trying to understand what controls the assessments so they get changed back to the In process status? Is the configuration linked to the Analysis period table?
Any clarification of the configuration would be much appreciated.
Thank you

Hi Luke,
The analysis period that is in the table now is what came standard. I didn't configure it. It has the SAP_DEF period set from Jan to Dec with a begin date of 1/1/2005 and end date of 12/31/9999. In reading the text it says that if you only have one performance period a year (which we do) then to only create one entry. I did adjust the Calendar year setting to "Current year" for both performance and potential (even though we are using a custom program to load the values).
As far as my Determine Periods and Groupings for my assessments I want the manger to be able to "Create" a new assessment every year beginning January 1st. So I have several entries that look like this for example:
          Start Date     End Date
POT      1/1/2013     12/31/2013
POT      1/1/2014     12/31/2014
RISK     1/1/2013     12/31/2013
RISK     1/1/2014     12/31/2014
BAR     1/1/2013     12/31/2013
BAR     1/1/2014     12/31/2014
Analysis Period Config:
Period Group     Period     Description     Start Date     End Date     Start Mth     End Month Comp
SAP_DEF      SAP_JTOD     Jan to Dec     1/1/2005     12/31/999     Jan               Dec
Key Date for Per and Potential
Period Group      Period          Day     Month     Calendar year
SAP_DEF          SAP_JTOD     7          Feb          Current year
I have it set to 7 Feb bc that is the day that we will run our custom load program for performance/potential.

Dust under screen of E71. Do Nokia care points eve...

Ok people bit of a moan really, which I need to get off my chest. I have taken 2 handsets to a Nokia care point and both times I have just walked out p****d off. This time I had an E71. It has a load of dust under the screen in the top left corner and also dust on the camera lens. When you activate the camera there is a black smudge in the top left of the picture. To be honest I noticed the dust after the first month but managed to ignore it. It has now got very bad and realising dust was on the camera lens was the last straw. The phone is under a year old by 3 months. It is in very good condition as I look after my phones, screen protectors etc and has the latest firmware on, version 400.
Now I emailed Nokia asking the best cause of action. I got this response:
"Thank you for contacting Nokia Care.
Sorry to hear that your E71 has a dust inside the screen. As much as we want to help you have a new replacement unit, we are not authorised to do so. We strongly suggest you to send your device on our respected Nokia Care Points. Please be advised that all assessments and repair services on our products are carried out at the Nokia Care Points. A qualified technician will assess your handset and repair it. The phone will be covered under warranty provided you have your original proof of purchase and all standard warranty conditions are met."
Note the last bit as it will be important. I took the phone today and the bloke told me there would be a £45-50 charge to have the phone cleaned, which to be honest I really don't want as I'm guessing the same will happen again a month later. I've read people having exactly the same issue on this forum. Plus there is no way I'm paying that amount of money. Didn't even ask for proof of purchase by the way.
I then took it to my mobile provider shop where it has now been sent away for free. I thought I may as well. They told me they may replace the handset, which to be honest I hope they do.
Has anyone had this level of 'help' through Nokia care points? I just think it's disgusting. What's the point of these '2 year' warranties that Nokia offer with their phones when all the Nokia care points want is money from you!!
Any way rant over. I just hope my phone doesn't come back in worse condition than what I sent it off in, since there was not a scratch on it, just a lot of dust :-/
Ben

send it to a nokia care centre dont attempt yourself it will void warranty if this shop is an official nokia store they will send it an official nokia centre
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Risk Assessment Talent Assessments

Hello Experts,
Question on the Risk Assessment, TM Ehp6. I've created a risk assessment with two elements and a scale of 1-3 (Low, Med, High). The two elements (Likelihood of Occurance, and Impact of Business) can be assessed by the manager and saved, no problem there. The Risk assessment with the scales and the final score are dislaying fine on the MSS/TMS talent profile (detail) however on the short profile where it says Risk Assessment it displays N/A. It also shows N/A anywhere else there is risk assessment field like on the Grid and Nakisa 4.0. How does the Risk assessment display in these fields? If there is more than one element does it take an average? All other assessments, Per/Pot/Derailers etc, display correctly.
Any clarification would be much appreciated.
Thanks
Sarah

Hi Sarah,
Firstly, for Nakisa you need to configure the VB object ID in the ABAP Add-on settings in the Data Center in the AdminConsole.
For the Short Profile, it seems like there might be a bug because it uses the same BAdI fields to display the data. You can check this in the IMG under Talent Management & Talent Development > Basic Settings > Adjusting the User Interfaces. Here you can check the Talent (Long) Profile and Short Profiles to ensure that they are using the same fields.
Best regards,
Luke

SSO to partner application running under IIS

Hi,
We have a complete set-up for 9iAS Release2 where some applications are running. In parallell we have an application running under IIS, and would now like to enable the IIS application as a partner application to 9iAS letting the 9iAS SSO server handle the authentication.
In the documentation of Oracle Proxy Plug-in I read that this proxy plug-in can be used to proxy requests from IIS to Oracle http server (OHS) and also in this way enable SSO.
My question is if this can be done only for applications running under 9iAS but having IIS as web server, or if it is also possible like in our case to enable SSO via the proxy plug-in to applications runnind under IIS?
If this is not supported is the only available solution to use the SSO SDK in my IIS application?
Thanks and regards,
Rikard

Here's a DIY answer.
See Metalink Note 269820.1 which shows you how to use Perl to overwrite the host name in the HTTP header and remove the port number.

Can I put more than one user under one Apple ID account. I want to let other family members use imessage on their own Apple device. Or is there another way to get this end result?

Can I put more than one user under one Apple ID account. I want to let other family members use imessage on their own Apple device. Or is there another way to get this end result?

You can seach the net for solutions like this one http://appletvvpn.com/how-to-connect-apple-tv-2-to-vpn/ another idea is to use a PC as the control and fit that with a wireless card and set up a ad hoc wireless network that the Apple TV uses.

My mac's software is only available under my profile on MacBook pro. How can other family members get to the optional SW logged in under their own profile

Is there a way to share purchased SW under mote than one profile on the MacBook pro?
Thanks

If the software is in the HD>Applications folder it's available to everyone. If for some reason you put software into User>Applications folder it will be available only to that user.

Application working under NetBeans but not as a *.jar file

Hello,
recently I found a little problem. I wrote application that shows all available ports in my computer. When I am running this applications under NetBeans it works with no problem - finds all available ports. Then I am building it to the *.jar file. Application is working with no problem but command:
Enumeration PortIds = CommPortIdentifier.getPortIdentifiers();
is not returning any identifiers - PortIds is empty.
Anyone knows a solution for this type of problems? Thanks

Hi Venkatesh,
Few questions.
1. What is your JDeveloper version? (Always better to post your JDev version along with the question, which would help us to help you better).
2. Did you try adding webserviceclient.jar to the classpath? (Search in your JDev installation directory for the location of this jar file).
-Arun

Application stuck under menu toolbar

An application I'm running (Filezilla FTP client) is stuck under the mac menu toolbar. I can't grab the toolbar of the application to move it or access what I need to access. I've researched this issue and other people have had the same problem, but none of their solutions have worked for me. I've tried changing the resolution of my screen, disconnecting my dual monitor, "zoom" is not available in the program I'm working with, and I've tried a multitude of expose/spaces/random key commands to no avail. Any other ideas?
Using 10.9.5

I can't see from your screenshot if there available screen space around the window. You could try dragging the window down from one of the bottom edge - making it smaller first if necessary (when the cursor is near the edge it has double arrow that indicates changing the window size), then make sure that your mouse is enough inside the window that the cursor is a normal one-arrow and drag it down. Repeat if necessary until the title bar reappears.

Application running slowly under Hyper-V (factor of 100 times slower)

I have an application running in a non virtual Windows Server 2008R2/SP1 environment. It processes about 60,000 records from an indexed file (about 20MB in length) in about a second running in that environment. I want to move the application
to a Hyper-V virtual server also running Windows Server 2008R2/SP1. When I do so, the application runs, but processing the same file takes almost 2 minutes.
The application is the only thing running in the virtual machine and the virtual machine is the only VM running on the physical box. The VM is configured with a single processor, 2048M of fixed (not dynamic) memory and a fixed size disk of 255GB.
There is no network traffic so the single network connection is not used. The physical machine is a quad core with 8GB of memory and two 1TB drives that are less than 1/4 used in each case.
Now for the weird part. The application runs from the command line. If I start it and do nothing else, it takes about 2 minutes to complete its process. But, if I start the application, switch focus to another window on the virtual
machine then switch back, the process completes immediately upon switching back to the command line window.
Any thoughts?

The VM is configured with a single processor - The physical machine is a quad core
Do you mean the physical machine that was running the application has a quad core processor? If not, what did the physical machine running the application actually have? Is the application multithreaded so that it can make use of multiple processors?
Did the application in the physical world have OS and data on the same disk or on different disks? Did you run this application shortly after you started the VM, or did you let the system quiesce a bit? Did you measure performance on the physical
under the same sort of conditions? Are you running from a cmd window or PowerShell? (Your comment about clicking away and coming back brings to mind things I've seen with PowerShell) Does it run quickly on a second instantiation, or does
it run poorly every instantiation?
Determining performance requires a lot more information than what you provided.
I always assign at least two virtual CPUs to any Windows Server VMs. There are enough system processes running on the box that two processors will almost always benefit the workload. Also, it it not uncommon that the first run of an application
shortly after a machine has started will never perform as it will after a machine has settled in. This is why every benchmark worth its salt will start the benchmark and let it run for a few minutes before they actually start measuring.
.:|:.:|:. tim

How to allow access to web service running under ApplicationPoolIdentity

Hi All,
I have a WCF web service hosted in IIS 7 (or maybe 7.5, whichever comes with Windows server 2008 R2) using DefaultAppPool running under ApplicationPoolIdentity per Microsoft's recommendation. The web service needs to call a stored procedure to insert data
to a db. The web server is on a different VM than the database server. The db server is running SQL 2008 R2. Both VMs run Windows server 2008 R2.
When the web service tries to connect to db, it encounters this exception:
Exception in InsertToDb()System.Data.SqlClient.SqlException (0x80131904): Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'.
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
Here's the connection string in web.config:
Application Name=somewebservice;Server=somewebserver;Integrated Security=SSPI;Database=somedatabase;Connection Timeout=60"
How should I configure SQL security to make this work?
Thanks in advanced.

Thanks for the link Dan. Maybe I'm the one who cause the confusion :)
If I understand you(and Erland) correctly, you suggest using a custom, domain account for application pool identity. However, if we do that, our IT will need to maintain those accounts, and they don't want that. So I'm choosing a built-in account called
ApplicationPoolIdentity as the application pool identity, but it's not working. Network Service, on the other hand, works, but my boss wants us to follow MS's best practice.
What's puzzling is that according to this: http://learn.iis.net/page.aspx/624/application-pool-identities/, both Network Service and ApplicationPoolIdentity uses machine account to access network resource (like db in this case), but in my case, Network Service
works, but not ApplicationPoolIdentity.
Hallo Stephen,
with respect - it seems to me that only idiots are working at your IT ;)... It is absolutely useful to work with "service accounts" created within the domain. That's the only way to manage and control accounts!
If you want to "pass through" the identity of the web user (SSO) you have to check whether the app pool is set to "allow impersonate". As far as I understand the ApplicationPoolIdentity-function the app pool will create a unique user named as the service.
I assume that will not work with the connection to the sql server because this user is unknown.
Local Service will not work because it's restriction is located to the local machine.
Network Service will work because access to network resources will be available.
So my recommendation is to use a dedicated service account or impersonation:
http://msdn.microsoft.com/en-us/library/xh507fc5.aspx
Uwe Ricken
MCITP Database Administrator 2005
MCITP Database Administrator 2008
MCITS Microsoft SQL Server 2008, Database Development
db Berater GmbH
http://www-db-berater.de

Global data getting reset when running under IIS?

We have a scenario using IIS with an ASP.NET web service written in VB.NET. When a call to the web service is made, the web service calls a native dll (written in C, compiled using VS2010) using platform invoke, which in turn calls into our product API:
VB.NET web service -> native library (p/invoke) -> native API ....
Web service requests are successfully completed and the system runs without problem for hours. A trace of the native API shows it is being called by multiple processes and multiple threads within those processes.
The main native API dll contains a static global variable used to detect whether it is the first time it has been called and run initialization logic if it is. This dll is itself linked to a second dll that contains a global variable used to detect if it is
the first time it has been called.
After some hours the trace shows that the native API is invoked by an existing process but that the initialization logic is being exercised again, even though the global variable was set to indicate not first time and is never reset. One theory was that
the first process has ended and a new process has started almost instantaneously using the same process ID. However this is not the case as existing thread IDs from the same process are seen to write to the trace again after the first time logic has executed
for the second time, indicating the process has not restarted. The problem occurs regularly.
It is as though the process's global data has been initialized again and malloc'ed memory freed while the processing is still running. Is there any way this is possible when running under IIS?
There is an internal thread which waits on a blocking read of a named pipe (via ReadFile), and when the problem occurs, the ReadFile call ends with ERROR_NO_ACCESS, which appears to indicate the malloc'ed buffer is no longer valid, again implying something
has happened to the memory allocated to the process.

Suggestting you asking it on:
http://forums.iis.net/

Flex application running under AIR takes a long, long time to start.

I have a flex application which runs on a desktop under AIR. The application has an assets folder with 3,500 mp3 soundclips totalling about 50MB. The problem is, the application takes around 90 seconds to load. I'm sure that AIR is scanning the application folder and doing something with the contents because if I delete the assets folder it loads in about 5 seconds. Does anyone know why AIR/Flex would do this, and why it doesn't exhibit the same problem if I run or debug in Flexbuilder on eclipse? It's making my killer app unusable!
Thanks
Paulo

Well, I've spent a bit longer looking at this now, and the problem appears to lie with my encrypted local store. The first thing that happens is for the app to read the product key from the ELS. But, it fails (for some unknown reason). So, the app seems to hang there for 90 seconds until it eventually renders the welcome screen. If I remove the assets folder it still fails to read from the ELS, but only takes a couple of seconds to start the welcome screen. This is where the scanning of the application folder seems to come into play, because if I remove the code which reads from the ELS the app starts within 2 seconds whether the asset folder is there or not.
I think the slow startup and the scanning of the assets folder are just symptoms of a different problem, i.e. a problem with the ELS. I don't have the same problem with my development environment though - it's only when I test deploy the application.
Thanks for your help on this problem EgorKDie. I think I should be able to resolve it once I can sort out why the ELS is being awkward.

RE: How to have multiple application running under one server

          I have one server
          I have many application
          Question: Is it possible for me to have a weblogic properties file under each
          of this application.


If your question is whether you can run multiple instances of WebLogic
          (or multiple applications) on one server, the answer is yes. The only
          problem is, you must have a unique port for each of the servers to run
          on. I.e., they can not all run under port 80 which has obvious
          internet/network implications.
          This also means you have multiple weblogic.properties files etc. for
          each instance.
          We do this with WL5.1 on a Linux 2.4 kernel in developement to allow
          multiple developers run their own instance on one box.
          Dano
          Mettu Kumar <[email protected]> wrote in message news:<[email protected]>...
          > No if you are running single instance of wls.
          >
          > Kumar.
          >
          > Sonny wrote:
          >
          > > I have one server
          > > I have many application
          > > Question: Is it possible for me to have a weblogic properties file under each
          > > of this application.

My downloaded text sounds do not show up under the sounds tab in settings after installing 8.1.1. can someone help me please?

i downloaded a couple text tones and since installing 8.1.1, they will not show up under the sounds tab. in fact, they do not show up in my recent purchases on itunes, but when i go to buy them again, it says that i have already bought this tone. I just want to use the tones i paid for as the tones on my phone. not asking much.... thanks for the help. i hope someone can help me get the tones working. thank you.

This was happening to me too but only for some of my songs. I have a mac so I dunno about PCs, but for most of my ringtones I had to create an ACC version in itunes to make them short enough then turn that into a m4r and those all worked fine. But if the song was already short enough and I didn't create an ACC version and just turned the original into a m4r, then it wouldn't appear in my itunes.
so if you're on a mac:
1. go to get info, options, pick when you want the song to start and end.
     Has to be pretty short to work, 30 second or less is good
     if it's already short enough that's fine
2. right click and click 'create ACC version'
     a copy with the length you put in will appear, drag that into a folder or whatever and just type in m4r where m4a would be
     still make an ACC version even if it's the right length
Hopefully this helps someone else.

Assessments under FI

Similar Messages

Maybe you are looking for