Asset accnting - Documents from last posting run in 2007 r not yet updated

Dear expert,
I have accidentatlly repeat run the depreciation so I deleted the batch file and re-run the correct one however I received message Documents from last posting run in 2007 are not updated. How to correct this?
thank you

I have resolved this issue. Actually the porblem was not as complicated as I thought.
Since I have accidentally run the reverse depreciation for 2007, I just let it post to 2007 period 12.
Then I changed the depreciation key back to ZLIN and re-run the depreciation and posted it in 2007 period 12. By doing this I nullified the previous wrong depreciation.
Next step I carried AJAB and closed the year 2007 without error. After that I went to change back the depreciation key to '0000' no depreciation.
With this workaround I managed to resolve the problem.
From this experience I advice user who want to change the depreciation key, before doing that better make sure your previous year has been closed. Else you will have problem closing your previous year after you have changed the depreciation key.
Dear Paul Annotee,
Many thanks to the support and suggestions you have given me. Thanks again.
regards,
Max

Similar Messages

  • Document from last posting run in 2007 are not yet updated

    Hi Guru's,
    When I run the AJRW fiscal year change 2009, it was not successful because a system message says" fiscal year change in company code XXX, possible only after year end closing 2007.
    So I execute AJAB-Year End closing in 2007, in Tab " Closed Carried Out - it say "NO", when i double click  it says: "Document from last posting run in 2007 are not yet updated"
    So i check it in SM35 to see when did this error started, i found out it started at around mid 2007, July, status is In background instead of Processed. Out of 15 thousand transaction, 14 of which got an error.
    Please help how we are able to post asset accounting for 2009.
    Thanks
    Mila
    Edited by: Mila Calonge on May 4, 2009 10:02 AM

    check the error log why the transactions are not processed. Recreate the session with transaction code AFBD giving the year and fiscal period and check the error log. It will give the clue why the transactions are not processed.
    Those might not have processed due to GL account assignment or cost center master data issues.

  • Depreciation Run Error "Not all the documents in the last posting run were

    Hi,
    When I tried to run depreciation, I found the error message as below.
    "Not all the documents in the last posting run were posted"
    How do I solve the problem?
    Please advise me..
    Thank you for your help..
    Jake

    Hi,
    For an Update termination you need to go into the System Log to check the real cause of the termination.
    My guess is that the document number has already been used. It has happened to me and I found no cause for that.
    I did the following then:
    I checked the highest used document number in that number range and corrected the from number of the number range.
    Then I went into the TABA table and corrected the entries there that they corresponded to the number range.
    Then I did a manual reconcilliation between AA and GL. In my case they matched, If they don't you would need to post manually to the GL to get them to match.
    Then I ran recalculation of asset values. and finally an unplanned depreciation run.
    For me it solved the problem.
    Br
    Cricke

  • Last posting run terminated (Restart in period 2011 010) _ Depre posting

    Hi
    I am trying post depreciation for the month of October 2011 for an asset.
    I am getting the following error:
    Last posting run terminated (Restart in period 2011 010)
    Message no. AA730
    Diagnosis
    The last posting run in period 010 2011 was terminated by an error. Before any more posting runs are performed, you must restart the posting run for period 010 2011.
    Procedure
    Start the posting run for period 010 2011 again using the restart parameter.
    I checked OB52 and the settings look ok.
    Any idea what might be the reason for the error?
    Thank you in advance
    Regards
    Vedavatee

    i checked in TABA
    and found:
    Client         Co Code    Fiscal year     Posted up to  No. of posting runs FROM Doc.No.     To doc.no.     Document posted
    123     ABCD     2011     008     01          0000000001     0000000001              N
    123     ABCD     2011     009     01          0000000001     0000000001              N
    123     ABCD     2011     009     02          0000000001     0000000001              N
    123     ABCD     2011     009     03          0000000001     0000000001              N
    123     ABCD     2011     010     01          0000000001     0000000001              1

  • Last posting run terminated (Restart in period 2010 001)

    HI,
    There is the challenge issue for Depreciation run in AFAB,
    While running the depreciation for the month of jan month system never allowing to post.
    After the upload of assets through BDC, this is the first time we are trying to run  the depreciation
    Also, in the test run, some times documents are created and for the same input parameters, if the test run is executed again, the below error appears.
    Job started
    Step 001 started (program RAPOST2000, variant &0000000000027, user ID TRAINING1)
    Last posting run terminated (Restart in period 2010 001)
    Spool request (number 0000010067) created without immediate output
    Job finished
    Can somebody help on this issue...
    Thanks & Regards
    Rajesh Kumar.S
    09620791110

    Hi Rajesh,
    Please check the depreciation (production run) log in AFBP by inputing Company Code Fiscal Year and period. This will provide you mored details of the error as to why the depreciation run went into error.
    After the errors are rectified, please run AFAB in restrat mode, this will resolve your issue.
    Thanks!!!
    Murlidhar Khatri

  • Last posting run terminated (Restart in period 2008 12)

    One Week ago we upgraded from SAP 4.6 to ECC6 and implemented recommendation in note 890976 (in transaction FBN1 I have set the accounting doc. 03 to internal number range determination). The first period (11) we executed the depreciation run for appeared to run successfully but for the second period (12) we are receiving the message "Last posting run terminated (Restart in period 2008 012)". This message will appear each time we run the depreciation for period 12.
    When I run transaction ARMO, I get the error "Document number 2100 300000001 2008 was already assigned
    Message no. F5152"
    In Transaction FBN1, we can no longer set the number range to external and the current status for company 2100 is 300000000.
    Can any one assist with resolving this issue?
    Thanks,
    Nicholas

    Ran some test in our QA system and found the solution. Changed the status number from 30000000 to 30000050 using transaction FBN1. Everything appears to be working now.
    Edited by: Nicholas Archer on Sep 15, 2008 11:56 AM

  • Error "Last posting run terminated"

    Hi Experts,
    When I tried to run the depreciation for Nov, I encounter the error "Last posting run terminated.  Restart in period 2009 010",
    But when I tried to restart the depreciation for October, I encounter the error Account 'Expense account for ordinary depreciat.' could not be found for area 01.  When I checked the assets, I can see in AW01N, that it has already posted a depreciation for October.  Why then would it ask for an expense account for period 10 when it has already posted a depreciation last October.
    Thanks to advise.
    Regards,
    Thess

    Dear,
    Just check account assignment in AO90 if G/L for 'Expense account for ordinary depreciat.' has not been changed. And also see the change document for more clarity.
    Regards,
    Chintan Joshi.

  • Message no. AA730 Last posting run terminated

    Hello,
    I loaded incorrectly assets (asset class land) with depreciation key but for a land there is no account determination.
    I´ve deleted the incorrect assets and when I run the depreciaton I´m receiving the error message Message no. AA730 Last posting run terminated Start the posting run for period xxxx again using the restart parameter.
    When I run the Restart there is the error message Message no. AU101 - There is no data record which meets the selection conditions specified.
    Is there any correction programm.
    Thanks

    Hi, it´s testing client but I can´t to delete the line item within one company code. I´ve found out the table ANLP has still value even I deleted the assets. Is there any transaction or program to delete ANLP entries with determination of Fixed asset No (one asset No not all table). I cant to go and delete directly in a table.
    Thank you a lot

  • Depreciation Run -"Last Posting run terminated Restart in period 03 2010"

    Hello Friends,
    Please help me for this. I am trying to run depreciation for a CoCd 2002 in
    production. When I do AFAB
    for FY 2010 Period 04. It gives a error message "Last Posting run
    terminated, restart in period 2010 003"
    Diagnosis*
    The last posting run in period 003 2010 was terminated by an error.
    Before any more posting runs are performed, you must restart the
    posting run for period 003 2010.
    Procedure
    Start the posting run for period 003 2010 again using the restart
    parameter.
    After this I run AFAB (03 2010) using the Restart radio tab, it runs ok in
    Test and w/o Test (i.e in backgrond),
    when I check SM37 - it shows a program RAPOST2000 is finished. Then I am
    able to run AFAB for (04 2010)
    in test and background also. Again a program is there in SM37.
    But when I try to run for period 05 2010 - it again shows the earlier error
    " "Last Posting run terminated, restart in period 2010 003""
    You see the error message comes again.
    Can someone suggest me a solution. Do I need to go sm35 and process the
    Batch I/P session . Why this error is
    coming up?
    Regards,
    George

    Hi George,
    please look at table-field TABA-XBUKZ.
    If there is a  "1" it means "Restart" necessary.
    If you have the restart sign you have to solve the error and after the restart the TABA-XBUKZ shoudl change to "X".
    regards Bernhard

  • Just upgraded my system to snow leopard...now when I open documents from my memory stick, its in 'pages' not word...how do I fix that??

    Just upgraded my system to snow leopard...now when I open documents from my memory stick, its in 'pages' not word...how do I fix that??

    Did you click on the little triangle? Did you select one of the document files before pressing COMMAND-I to open the Get Info window? If the panel is closed it looks like this:
    If you then click on that little triangle gadget you get this:
    A temporary solution is to CTRL- or RIGHT-click on the document file, navigate to the Open With item, and select from the sub-menu.
    The first method makes the association permanent. This method only applies to the currently selected document.

  • I had a mac pro system..from last 2 days the keyboard is not working properly..if i typed a key but it displayed 2 or 3 keys..what is the problem? is keyboard gone..?

    i had a mac pro system..from last 2 days the keyboard is not working properly..if i typed a key but it displayed 2 or 3 keys..what is the problem? is keyboard gone..?

    Hey ynareshbabu,
    Thanks for the question. I understand you are having issues with your keyboard. The following article provides some great troubleshooting steps:
    One or more keys on the keyboard do not respond
    http://support.apple.com/kb/TS1381
    You may want to refer to the "Some keys don't work as expected" section.
    Thanks,
    Matt M.

  • I have not used ipad from last 1 year and now its not starting any suggestion how to start, i have not used ipad from last 1 year and now its not starting any suggestion how to start

    i have not used ipad from last 1 year and now its not starting any suggestion how to start,

    Using the Supplied iPad charger, Connect it to the mains for at least 60 minutes...
    Then try to turn it on.

  • I've MacBook Pro 2009 model... from last few days my airport is not functional. This happened when I deleted list com.apple..... from systems folder from library- preference- system. Now, when you check the status of Airport hardware it says "Not

    I've MacBook Pro 2009 model... from last few days my airport is not functional. This happened when I deleted plist of com.apple..... from systems folder from library-> preference->system. Now, when you check the status of Airport hardware it says "Not Associated".  One more thing that came to my notice is that 'com.apple.internetconfigpriv.plist' this file is missing from system folder. Any help would be appreciated.
    Thanks

    Thank you for your reply......
    I have tried using different OS 10.7, 10.8... further OS doesn't suit my MacBook, so currently I am on 10.6. I did reinstallation twice using 10.6 but the files were not restored.
    Yes.. I am talking about internet wireless card.
    I don't have back up files for files which i deleted and they are not in trash as well.... the reason I deleted files was from the image attached from OSXdaily.com
    I have tried resetting the PRAM, NVRAM, SMC but to no use.
    now what do I do.??

  • Infospoke error +The last extraction for this InfoSpoke is not yet Complete

    Hello Experts,
                      I am receiving the error  "The last extraction for this InfoSpoke is not yet Complete " while starting the load for Infospoke.
    Please advice
    Thanks and Regards,
    Rezwan Asraf Ali

    Hi,
    This error RSBO320 is usually related to an inconsistency of infospoke internal tables which is will need to be reset manually by SAP developers. So you'll probably be best opening a ticket under BW-WHM-DBA-OHS.
    Rgds,
    Colum

  • How to get sales order data in substitution of fi-docu from GM posting ?

    How to get sales order data in substitution of FI documents from goods movement posting?
    When I posting a material document with movement type "501E", the system will creating a FI document automatically. And I need to get the sales order data in the substitution of FI document.
    I tried to export the data of the material document in user-exit "MB_CF001 Updating of material document data upon posting", but this user-exit does not triggered in the posting process at all. what's the problem?
    Do you have better solution or idea for this? Please help me. Thank you!

    Hello Harish,
    Please use BAPI_BUSPROCESSND_GETDETAILMUL to read details of sales order. This works as a remote enabled counterpart of CRM_ORDER_READ.
    Similarly if you want to display sales order from R/3, use FM BAPI_BUSPROCESSND_DISPLAY.
    Regards
    Kaushal

Maybe you are looking for