Asset Acquisition Error: Global Company is not supported

Dear All
i am trying to post and asset acquisition through F-90 when i try to save the document i am getting the
following message
Global company XXXXX is not supported
Message no. GI102
Diagnosis
The direct posting function could not find the global company specified. The global company has either been entered in the document or read from table T001 based on the transferred company code. Each global company must be defined in table T880.
System Response
Direct posting to General Ledger cannot take place.
Procedure
Check the document as well as tables T001 and T880.
Please tell me how to rectify this problem
Regards
Bilal

Hi Have a look to SE16 if the values are in both tables are the same.
In SM30 you can fill in the table name and click on the button Customizing to found where you have to change the settings
Paul

Similar Messages

Oracle 11i Fixed Assets - Additions Error Message Company is not value

I have created Fixed Assets Corporate Book and trying to add a new record through Assets Workbench and Addition Option. When I try to create information in Assignment Detail to enter Expenses Account and I am selecting Expense Account but getting Message "Company is not value for Book selected (Company Name1 should be 01, Company Name2 should be 02, Company Name3 should be 03)
It shows message with old existing Corporate Book.
Do you have any idea Why this message is shown.
Your Help in this regard will be apreciated.

Its 01.10.2000. So i think thats the problem
I want to post in 1st April 2009 (7th month of fiscal year 2009) and 01st November 2009 (ie 2nd month of fiscal year 2010). So what date i should put ?
Edited by: Deepak Agrawal on Nov 6, 2009 10:51 AM

"error: thread-local storage not supported for this target"

I have a program that uses the __thread specifier, to be run on a Solaris 9/UltraSprac.
I am not able to compile it using gcc 3.4.4 or 4.0.4, it emits the msg "error: thread-local storage not supported for this target".
xz@gamera% gcc -v -Wall -D_REENTRANT -c -o func_stack.o func_stack.c
Reading specs from /opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/specs
Configured with: ../srcdir/configure --prefix=/opt/gcc/3.4.4 --disable-nls
Thread model: posix
gcc version 3.4.4
/opt/gcc/3.4.4/libexec/gcc/sparc-sun-solaris2.8/3.4.4/cc1 -quiet -v -D_REENTRANT -DMESS func_stack.c -quiet -dumpbase func_stack.c -mcpu=v7 -auxbase-strip func_stack.o -Wall -version -o /var/tmp//cc0poHSN.s
ignoring nonexistent directory "/usr/local/include"
ignoring nonexistent directory "/opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/../../../../sparc-sun-solaris2.8/include"
#include "..." search starts here:
#include <...> search starts here:
/opt/gcc/3.4.4/include
/opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/include
/usr/include
End of search list.
GNU C version 3.4.4 (sparc-sun-solaris2.8)
        compiled by GNU C version 3.4.4.
GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
func_stack.c:16: error: thread-local storage not supported for this target
func_stack.c:17: error: thread-local storage not supported for this target
func_stack.c:19: error: thread-local storage not supported for this target
xs@gamera% gcc -v -D_REENTRANT -c -o func_stack.o func_stack.c
Using built-in specs.
Target: sparc-sun-solaris2.9
Configured with: /net/clpt-v490-0/export/data/bldmstr/20070711_mars_gcc/src/configure --prefix=/usr/sfw --enable-shared --with-system-zlib --enable-checking=release --disable-libmudflap --enable-languages=c,c++ --enable-version-specific-runtime-libs --with-cpu=v9 --with-ld=/usr/ccs/bin/ld --without-gnu-ld
Thread model: posix
gcc version 4.0.4 (gccfss)
/pkg/gcc/4.0.4/bin/../libexec/gcc/sparc-sun-solaris2.9/4.0.4/cc1 -quiet -v -I. -iprefix /pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/ -D__sparcv8 -D_REENTRANT -DMESS func_stack.c -quiet -dumpbase func_stack.c -mcpu=v9 -auxbase-strip func_stack.o -version -m32 -o /tmp/ccjsdswh.s -r /tmp/cc2w4ZRo.ir
ignoring nonexistent directory "/pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/../../../../sparc-sun-solaris2.9/include"
ignoring nonexistent directory "/usr/local/include"
ignoring nonexistent directory "/usr/sfw/lib/gcc/sparc-sun-solaris2.9/4.0.4/include"
ignoring nonexistent directory "/usr/sfw/lib/../sparc-sun-solaris2.9/include"
#include "..." search starts here:
#include <...> search starts here:
/pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/include
/usr/sfw/include
/usr/include
End of search list.
GNU C version 4.0.4 (gccfss) (sparc-sun-solaris2.9)
        compiled by GNU C version 4.0.4 (gccfss).
GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
func_stack.c:16: error: thread-local storage not supported for this target
func_stack.c:17: error: thread-local storage not supported for this target
func_stack.c:19: error: thread-local storage not supported for this targetJust as comparison, the corresponding output of compiling another file which does not have __thread declaration is as follows:
xz@gamera% gcc -v -Wall -D_REENTRANT -c -o common.o common.c
Reading specs from /opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/specs
Configured with: ../srcdir/configure --prefix=/opt/gcc/3.4.4 --disable-nls
Thread model: posix
gcc version 3.4.4
/opt/gcc/3.4.4/libexec/gcc/sparc-sun-solaris2.8/3.4.4/cc1 -quiet -v -D_REENTRANT -DMESS common.c -quiet -dumpbase common.c -mcpu=v7 -auxbase-strip common.o -Wall -version -o /var/tmp//cc4VxrLz.s
ignoring nonexistent directory "/usr/local/include"
ignoring nonexistent directory "/opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/../../../../sparc-sun-solaris2.8/include"
#include "..." search starts here:
#include <...> search starts here:
/opt/gcc/3.4.4/include
/opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/include
/usr/include
End of search list.
GNU C version 3.4.4 (sparc-sun-solaris2.8)
        compiled by GNU C version 3.4.4.
GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
/usr/ccs/bin/as -V -Qy -s -xarch=v8 -o common.o /var/tmp//cc4VxrLz.s
/usr/ccs/bin/as: Sun WorkShop 6 update 2 Compiler Common 6.2 Solaris_9_CBE 2001/04/02Note that the last 2 lines seem to suggest that a Sun assembler is used as the back-end of gcc. I am not sure whether the failure to compile the first file (with __thread) was due to the incompatibility of this Sun assembler. In the first case, the error msg was emitted before these 2 lines are printed.
I further read a post about gcc 3.3.3's inability to compile code that has __thread in it, on a HP-UX 11.11: http://forums12.itrc.hp.com/service/forums/questionanswer.do?admit=109447627+1216595175060+28353475&threadId=1148976 The conclusion seems to suggest that "the 2.17 GNU assembler did not support thread local storage" and gcc sees that and thus disallows TLS.
If the assembler is the culprit, then does anyone know whether this "Sun WorkShop 6 update 2" assembler in my installation can work with TLS? And how come a Sun assembler becomes the back-end of gcc? I read that gas (the GNU assembler) is the default backend of gcc. (How) can one specify the assembler to be used for gcc?
As an aside, I am able to compile my file on this same Solaris 9/UltraSparc platform using the Sun Studio 12 C Compiler:
xz@gamera% cc -V -# -D_REENTRANT -c -o func_stack.o func_stack.c
cc: Sun C 5.9 SunOS_sparc Patch 124867-01 2007/07/12
### Note: NLSPATH = /pkg/SUNWspro/12/prod/bin/../lib/locale/%L/LC_MESSAGES/%N.cat:/pkg/SUNWspro/12/prod/bin/../../lib/locale/%L/LC_MESSAGES/%N.cat
###     command line files and options (expanded):
### -c -D_REENTRANT -V func_stack.c -o func_stack.o
/pkg/SUNWspro/12/prod/bin/acomp -xldscope=global -i func_stack.c -y-fbe -y/pkg/SUNWspro/12/prod/bin/fbe -y-xarch=generic -y-xmemalign=8i -y-o -yfunc_stack.o -y-verbose -y-xthreadvar=no%dynamic -y-comdat -xdbggen=no%stabs+dwarf2+usedonly -V -D_REENTRANT -m32 -fparam_ir -Qy -D__SunOS_5_9 -D__SUNPRO_C=0x590 -D__SVR4 -D__sun -D__SunOS -D__unix -D__sparc -D__BUILTIN_VA_ARG_INCR -D__C99FEATURES__ -Xa -D__PRAGMA_REDEFINE_EXTNAME -Dunix -Dsun -Dsparc -D__RESTRICT -xc99=%all,no%lib -D__FLT_EVAL_METHOD__=0 -I/pkg/SUNWspro/12/prod/include/cc "-g/pkg/SUNWspro/12/prod/bin/cc -V -D_REENTRANT -c -o func_stack.o " -fsimple=0 -D__SUN_PREFETCH -destination_ir=yabe
acomp: Sun C 5.9 SunOS_sparc Patch 124867-01 2007/07/12Interestingly, the output no longer mentions the "/usr/ccs/bin/as: Sun WorkShop 6 update 2" assembler.

Just as another comparison, I compiled a file without __thread on the Solaris 9/UltraSparc platform using gcc 4.0.4. Not surprisingly it worked. But I no longer see the mention of the Sun assembler as in the case of gcc 3.4.4. Nor did I see the mention of "GNU assembler" as in the case of gcc 4.0.4/Solaris 10/x86. Instead, I saw something called "iropt" and "cg". Does anyone know what they are?
xz@gamera% gcc -v -Wall -D_REENTRANT -c -o common.o common.c
Using built-in specs.
Target: sparc-sun-solaris2.9
Configured with: /net/clpt-v490-0/export/data/bldmstr/20070711_mars_gcc/src/configure --prefix=/usr/sfw --enable-shared --with-system-zlib --enable-checking=release --disable-libmudflap --enable-languages=c,c++ --enable-version-specific-runtime-libs --with-cpu=v9 --with-ld=/usr/ccs/bin/ld --without-gnu-ld
Thread model: posix
gcc version 4.0.4 (gccfss)
/pkg/gcc/4.0.4/bin/../libexec/gcc/sparc-sun-solaris2.9/4.0.4/cc1 -quiet -v -iprefix /pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/ -D__sparcv8 -D_REENTRANT -DMESS common.c -quiet -dumpbase common.c -mcpu=v9 -auxbase-strip common.o -Wall -version -m32 -o /tmp/ccSGJIDD.s -r /tmp/ccKuJz76.ir
ignoring nonexistent directory "/pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/../../../../sparc-sun-solaris2.9/include"
ignoring nonexistent directory "/usr/local/include"
ignoring nonexistent directory "/usr/sfw/lib/gcc/sparc-sun-solaris2.9/4.0.4/include"
ignoring nonexistent directory "/usr/sfw/lib/../sparc-sun-solaris2.9/include"
#include "..." search starts here:
#include <...> search starts here:
/pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/include
/usr/sfw/include
/usr/include
End of search list.
GNU C version 4.0.4 (gccfss) (sparc-sun-solaris2.9)
        compiled by GNU C version 4.0.4 (gccfss).
GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
/pkg/gcc/4.0.4/SUNW0scgfss/4.0.4/prod/bin/iropt -F -xarch=v8plus -xchip=generic -O1 -xvector=no -xbuiltin=%none -xcache=generic -Qy -h_gcc -o /tmp/ccUl4mVM.ircg /tmp/ccKuJz76.ir -N/dev/null -is /tmp/ccSGJIDD.s
/pkg/gcc/4.0.4/SUNW0scgfss/4.0.4/prod/bin/cg -Qy -xarch=v8plus -xchip=generic -OO0 -T3 -Qiselect-C0 -Qrm:newregman:coalescing=0 -xcode=abs32 -xcache=generic -xmemalign=8i -il /pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4//gccbuiltins.il -xvector=no -xthreadvar=no%dynamic -xbuiltin=%none -Qassembler-ounrefsym=0 -Qiselect-T0 -Qassembler-I -Qassembler-U -comdat -h_gcc -is /tmp/ccSGJIDD.s -ir /tmp/ccUl4mVM.ircg -oo common.o

Account 'Acquisition from affiliated company' could not be found

Hi All
Account 'Acquisition from affiliated company' could not be found.
Message no. AU133
Diagnosis
When creating the accounting document, the system could not find account 'Acquisition from affiliated company' for company code but already i have maintained account in AO90.
Procedure
Enter this account in the account determination for Asset Accounting

Hi,
Perhaps you have maintain the account determination, just double check and ensure that both fields KTVZU (Acquisition from affiliated company) and KTVBAB (Clear.revenue sale to affil.company) is input with an appropriate account.
Kind regards,
John Chin

SapEHP Installer - ERROR: Release '701' is not supported by this tool!

Hi gurus, I am trying to do a EHP4 upgrade using the EHPI. I am using the latest EHPI 710. The moment i enter the KEYword and Download directory it go through and then come up with an error message "701 is not supported by this tool". Please help me solve this issue.

Hi Ram,
1) You are using wrong EHPI , you need to use SAP EHPI 700 version . The EHPI 710 to upgrade SAP NW 710 system to EHP1 i.e to 711
My Company's Application Components" SAP EHP INSTALLER" SAP EHP INSTALLER 7.00
2) You need to generate .xml file from SAP Solution Manager by seleting required ECC usagae types. SAP EHPI will ask for .xml file in future steps.
Regards,
Preethish

In MB1B - Error " AC519 - Company code not defined"

Dear All,
I tried posting in T-code MB1B & ME2O for Sub contracting (Item category L in PO).
After assigning Purchase Order in MB1B or ME2O, system is giving Error Msg
" Company code not defined" Message no. AC519
AC519 is related to Asset Accounting.
I have checked OBY6 all the settings is in place.
All answers/suggestion will be rewarded with point.
Thanks in Advance.
Velu Mudaliar

Hello Velu,
This may help:
You have to check the content of tables T093C, T093U, T093B, T093D.
There might be entries with value ' ' (initial).
If you cannot use SE16N to delete these entries, or you may create a
a self made abap to delete the entries.
cheers,
Jon

HT1476 when i plug my phone into the usb port with the apple charger that came with my phone i get an error msg say charging not supported by this device. But when i use a gigaware (radioshack brand) usb charger, no error msg. Why?

when i plug my phone into the usb port with the apple charger that came with my phone i get an error msg say charging not supported by this device. But when i use a gigaware (radioshack brand) usb charger, no error msg. Why?

- Try restoring the iPod, first from backup and then try to factory settings/new iPod to rule out a software problem.
- Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, foreign material and broken or cracked plastic.
- Could you have damaged something when you took the iPod apart and replaced the Home button?

What does the Error Message: "File format not supported" mean?

When I first open an existing project, I get an Error Message: "File format not supported". After a few seconds all the windows open up and I can continue to edit. My question is will this "File format not supported" haunt me later or shall I continue to edit as I am doing? Why does this error message come up? All the current footage is shot on same camera, the Canon 5D Mark III at 23.98 time code rate, 1920 x 1080.

More information might help someone help you - Information FAQ http://forums.adobe.com/message/4200840
Also, are your files on an external drive?

Error: "Function or method not supported." when using RF List Mode on NI 5673E

Hi,
I am trying to use the RF List Mode in NI RFSG 5673E. I tried running the sample code "RFSG Configuration List Frequency and Power Sweep.vi" but an error would show up:
"Error: niRFSGCreateConfigurationList.VI <ERR> The LO reported the following error: Function or method not supported." with the error code: BFFA4239.
I also tried running other sample codes that contain the Configuration List VI's but the same error appeared. I am using NI RFSG 1.8.5.
I would really appreciate any help on this. Thanks!

Hello jdlabrador,
I setup a 5673E here and tried to run the same example. I did not encounter an error.
Other reports I've found pertaining to this error usually involved a large number of steps - there was not enough space on the hardware to accommodate them. The error text you're seeing is a little different in that it states that the Create Configuration List method isn't supported for the LO.
Do each of the modules in your 5673E (5450, 5611, 5652) pass a self-test in MAX?
Have you associated the 5450 and 5652 with the 5611?
Could you post a screenshot of the fully-expanded Devices and Interfaces tree from MAX?
Since RFSG 1.9.5 is available, it may be a good first-step to upgrade to it.
Best regards,
Matthew H.
Applications Engineer
National Instruments

ERROR: Release '640' is not supported by this tool!

Hi,
i'm trying to upgrade system SAP ERP 5.0 to SAP ERP 6.0 EHP 4 and i got problem with EHP installer,
1. I readed and made all the steps as described in Upgrade guide
2. Downloaded EHP installer version 7.00 (but when it starts shows me on screen version 7.10)
3. Via MOPZ i took the list and XML file for the SAR files
4. Downloaded corrections for EHP installer
when i start EHP installer, it asks me for the code and for the download directory, i put all required and after that EHP installer works for 5-10 minutes and stops with error:
ERROR: Release '640' is not supported by this tool!
in VERSSTAMP file wroten:
EHPIVersion = 2.005.001
SAPJup = NWSL702_00
SAPehpi = 710-1
ostype = hp_64
release = 702_REL
toolrelease = 710
date = 2010-2-4
time = 7:35:22
packversion = 24
crpkversion = 1.020
Please anyone give solution!

i think i didn't start the master dvd ))

ME52n - Error Message - Company was not supplied in function module.

Hello,
It is giving error Message - "Company was not supplied in function module" in the initial screen of ME52n and ME53n.
Please help.
Thanks,
Piyush

Hi Vadi,
when ever you open me52n or me53n ..system by default opnes/shows your last created/ opned PR.
so if that last created / changed PR is having wrong/faulty data (missing assignment/ plat stolocation deleted etc) ..system will not be able to fetch respective data....thats why you will get above eror message...
Solution : Create any smaple PR in ME51n/ or try to chnage any existing PR.. and then save it.
try this 1 or 2 times.
Hope so this will help.
Regards,
Nilesh

Error message airport utility not supported on this architecture

I'm using a macbook pro with OS X v10.5.8 and trying to set up a new Time Capsule network, however I'm getting the error message "airport utility not supported on this architecture". How do I fix this so I can set up my network?

Hmmm, that message would imply that Airport Utility is from a PPC Mac, or an older version of the OS?
Might download & install this...
http://support.apple.com/downloads/AirPort_Utility_5_3_2_for_Leopard
Also see...
http://support.apple.com/kb/HT1998

When trying to change ringtone I keep getting the error message file type not supported.

I have downloaded some ringtones fro VZ Tones and when I go to make them the default it gives me the error message file type not supported. If I go to my storage and try to look at pictures, it tells me the same thing.

That's definitely odd CrystiDawn, and I understand it can be quite frustrating. Let's get to the bottomof this. What device make and model phone do you have? Did you receive a text message with a link to download the ringtones? If so, once downloaded, please go to all your Apps, locate "Files" and play the ringtone using the media player. You will have the option to set it as ringtone while playing and pressing the menu icon. Were the pictures taken from the phone or transferred using the USB cable?
AdaS_VZW
Follow us on Twitter at @VZWSupport

Hosting company does not support SQL query with OUTFILE clause

From my mysql database, I want to allow the user to run a query and produce a csv / text file of our membership database. Unfortunately, I just found out my hosting company does not support the SQL query with OUTFILE clause for MySQL database.
Are there any other options available to produce a file besides me running the query in phpadmin and making the file available to users.
Thanks. George

Maybe this external Export Mysql data to CSV - PHP tutorial will be of help
Cheers,
Günter

Error "This class does not support SAAJ 1.3" in oim 11g

hai all,
i have error "This class does not support SAAJ 1.3" when i running create user.
i already tried added in startWeblogic.cmd and in setDomainEnv.cmd :
-Djavax.xml.soap.MessageFactory=weblogic.xml.saaj.MessageFactoryImpl and -Djavax.xml.soap.MessageFactory=com.sun.xml.internal.messaging.saaj.soap.ver1_1.SOAPMessageFactory1_1Impl
step like this site (http://blog.xebia.com/2009/07/14/jax-ws-cxf-and-saaj-on-oracle-weblogic-103/)
i already too set path for = saaj-impl-1.3.jar but the error still same "This class does not support SAAJ 1.3"
i used weblogic 10.3.5, i'm generate soap message used rt.jar (import javax.xml.namespace.QName; etc)
any idea to solving this error ?
thank's
darvesth
Edited by: darvesth on Mar 19, 2013 4:08 AM

thank you darvest, i follow your step before.
but i added any steps after that.
1. include saaj-impl-1.13.jar and saaj-api.jar in project adapter
2. add parameter "SOAPConstants.SOAP_1_2_PROTOCOL" in line code, MessageFactory mf= MessageFactory.newInstance()
-> MessageFactory mf= MessageFactory.newInstance(SOAPConstants.SOAP_1_2_PROTOCOL);
so, my problem already resolve..
i hope this solution usefull to resolve our problem, darvest.
thanks,
Tim BENGA

Asset Acquisition Error: Global Company is not supported

Similar Messages

Maybe you are looking for