Asset Acquisition Report(RAZUGA_ALV01)

In asset acquisition report(RAZUGA_ALV01), we can get the field - Ordinary Depreciation(O.dep.) after changing the report layout. While using this report, I found the value of O. dep.(NAFAB) is different from the planned ordinary depreciation (NAFAP) in asset explore. It seems the data in field NAFAB not updated even though changing acquisition date. In AW01N, depreciation area 10(US tax books), the planned ordinary depreciation is not same as the EOrd.dep value in the lower part - Transactions.
Who knows whether it is possible to keep field: NAFAB equal to NAFAP? and whether has the field O.dep of RAZUGA_ALV01 been abandoned after the activation of EA-FIN?
Thanks,
Dy

Hi
In this report RAZUGA_ALV01
NAFAP field is not used.
NAFAB is different & NAFAP is different.
VVR

Similar Messages

  • Fixed asset acquisition report by month?

    Hi,
    We're using the fixed asset acquisition report thru tcode 'S_ALR_87012050 '.
    but there is only the report date input with the last day of the fiscal year concerned.
    Is there any standard report to see acquisition amount with month-end or specific date?
    Thanks for your help.

    Chris,
    I have just one more suggestion.  Even though you have to use a yearend Report date for a closed prior-year, you could define a range in the Posting date selection criteria.  In other words, if you would like to see the acquisitions for a given month or range of months in a closed prior-year, then give a 12/31/PY for the Report date and a specified date range in the Posting date selection criteria.
    Hope this helps.
    Thanks,
    Chad
    Edited by: Chad Busbee on Feb 8, 2008 2:56 PM

  • S_ALR_87012050 Asset Acquisitions Report.

    Hi,
    While executing the transaction S_ALR_87012050 - Asset Acquisitions, I would also like to pull the information like Vendor No., Vendor Name, Invoice No. of the Asset Capitalized. How will it work with this particular TCODE or there is some alternative TCODE to this report.
    Thanks in Advance. 
    Pankaj Amesur.

    Hi,
    You can use the required sort version option in S_ALR_87012050 to get the required output. Use T.code OAVI to create the sort version on your own.
    Hope it resolves your issue.
    Regards,
    Murali

  • Report S_ALR_87012050 - Asset Acquisitions

    Hello,
    The report S_ALR_87012050 - Asset Acquisitions is bringing only information from the "current year" acquisition - Tty 336, and it's not bringing information from the "prior year" - Tty 331.
    Is it a customizing in the report to change it, or is it default by SAP?
    Comparing to the report S_ALR_87011990 - Asset History Sheet, the values from the acquisition don't match because of this difference.
    Thanks,
    Barbara

    Hi Barbara,
    In our system we don't have ttype 331 and 336.
    Have a look in SPRO what Transaction type grp you are using (31 or 33 should be in)
    Financial Accounting / Asset Accounting / Transactions / Transfers / Define Transaction Types for Transfers.

  • Error while doing asset acquisition

    Hi Friends
    I am tryin to post an asset acquisition but gettin the following error-
    Contact your system administrator (table error)
    Message no. AA824
    Diagnosis
    No accounts have been entered for depreciation area 01 for account allocation 11000 (chart of accounts CAIN).
    Procedure
    Maintain the accounts for depreciation area 01.
    I have done the Account determination for Dep Area 01.
    Am i missing something here? Help would be greatly appreciated.

    Hello Vishal
    Use report RACKONTO to have an extended log of eventual inconsistencies in any of your account determinations. Make sure the log is error free for all the account determinations.
    Regards
    Javier Reviriego

  • Asset acquisition value is not updating in Asset history sheet & AW01N

    Hi,
    The issue is the asset acquisition values are not updated in AW01N & Asset history sheet report for particular asset acquisition transaction only.
    it`s showing in asset history sheet but its nt added in the current APC value in the asset history report & also its showing in AW01N transaction but in acquisition change column its not updating.
    I have also checked the below link but still i am persisting the same problem.
    Asset acquisition value not updating
    Regards
    Amit

    Hi Amit,
    check note  366848.
    Implement reports RACORR110_B and the report RACORR55 from the note 366848 in your system.                                                                               
    At first run the report RACORR110_B. Check the  field ANLC-ANSWL bevor and after running the report.                   
    The report RACORR110_B accumulates the values of the asset line items  and writes the result in the field ANLC-ANSWL.                                                                               
    After this, please start the report RACORR55. This report forwards the  values in the following year.
    (If this is not the reason (ANLC is correct), the report makes nothing.) 
    Regards Bernhard

  • Need FM/BAPI for asset acquisitions, disposals and balances...

    Hello Experts,
    I need to create a report wherein it shows the asset acquisitions(S_ALR_87012050),
    disposals/retirements(S_ALR_87012052) and balances(S_ALR_87011964).
    Anybody has done this requirement? Please let me know what are the tables and BAPIS that
    I need to use.
    Hoe you can help me guys. Thank you and take care!

    Hi,
    Pls check this link for Asset balances-
    Asset balances
    Regards
    Lekha

  • Asset acquistion reports

    We are looking for a report in SAP that shows asset acquisitions and for these acquisitions the cost centre and business area that they post to.  At the moment we have 2 run 3 different reports to get this information.  I was wondering if there is a report or a query that we could use.
    Thanks,

    HI,
    Please check AR02 report it those field are not available create new sort variant. or else create query with logical data base.
    Regards,
    Raman

  • Fixed Asset Additions Report

    Hello,
    Is there a way to run a fixed asset addition report in SAP and then export it into excel?  I have run S_ALR_87012058, however, there is no way to export this into excel.  Can anyone help please?
    Thank you,
    Lesley-Anne

    Hi,
    you can export the result of report S_ALR_87012058 and save it into excel file.
    please follow the path below.
    Regards,
    otep

  • Fixed Asset Book Report

    When running the Fixed Asset Book report, the system shows every instance of an asset number. By that I mean that when and asset has changed locations the asset shows in the report in both locations with a value of zero in one location. This makes using this report for NBV reconciliations to the GL very difficult as I need to find ways of tracking and eliminating the duplicates before I can even begin.
    Is there a way to get the report to provide the data only in the current locations or is there a differant report I can use that provides a NBV at a period end broken out by cost and accumulated depreciation.
    Any assistance would be appreciated.

    Please see (FAQ: RXi Reports (JGRX/RXJG, FARX/RXFA, APRX/RXAP, ARRX/RXAR) [ID 430075.1]) -- How To Find The Source Code Of An RXi Report ?
    Thanks,
    Hussein

  • Asset balance report Vendor/supplier wise

    Dear All,
    I want to take asset balances report vendor/ supplier wise.
    Is any report avaliable like this?
    Thanks & Regards,
    Pritam

    Hi,
    you can use sort variants which contain the vendor information. You can find some information in SAP notes 98739 and 546856.
    Regards,
    Markus

  • PS report does not equal to asset balance report

    Hi SAP Gurus,
    We have this problem where PS report S_ALR_87013557 is showing higher amount than the Asset Balances report S_ALR_87011964.
    Have checked on the transactions and found out that some postings are not yet settled to asset that is why the amount is different. However, there are instances that settlement has been done to Asset but it did not reflect to Asset Balances report. Is there a way or report so that I can further check on discrepancy?
    Also, is there any existing report where I can view all postings made to WBS element or even project definition?
    Thanks in advance.

    Hi Ahmed,
    Thanks for your response.
    Receiver in settlement rule is  fixed asset, but some did not have WBS in asset master, maybe this is the reason.
    Have checked report S_ALR_87013558, though I'm not sure what is Commitment column all about?
    Can any one help the purpose of the commitment column and in what scenario it will reflect to actual column?
    Appreciate any inputs on this. Thank you.

  • Error in Asset Transactions Report in ECC 6

    Hi Friends,
    We have upgraded from ECC 4.7 to ECC 6.0 in Nov 2007.
    In Asset Transactions Report (S_ALR_87012048) the Depreciation column is displaying Zero Values for individual line items after November 2007 (ie for Assets posted after Nov, 07).
    We posted the same to SAP and they are saying that since New Depreciation Calculation has been activated, Depreciation on Individual transactions will not be calculated.
    SAP has quoted the following note:
    As per note 965032 point 4d under the header 'No depreciations ontransactions' which states:-
    .... if you use the new depreciation calculation, the system no longer saves depreciations on transactions in the line items. Exceptions to this rule are - proportional value adjustments in the case of retirements or retirement transfers, since these must continue to be calculated at single transaction level.
    My questions are:
    1.Even after this the report with depreciation values as Zero can be grossly misleading (other reports are showing correct values).  Is it correct?
    2.If what SAP is saying is correct, then How is this New Depreciation calculated? If anybody has an idea, please explain...
    I hope i am clear in stating my requirements.
    Thanks in advance.
    SK

    Hello,
    Can you please look in the /put/log directory and copy the error from the appropriate log file. You should find a log file with a name similar the to upgrade phase that is causing the error.
    Thanks
    N.P.C

  • How to get loss from asset retirement..in asset acounting report

    Hi  in my asset acounting report i have to show Loss from asset retirement . in structure ANEPV the field is MINERL. in the standard report they are using logical dtaabse ADA and node ANEPV(report  RAABGA_ALV01) . i don't want to include the node in my report.Is there any FM showing the loss value or any other way to show this value .
    THANKS in advance...

    Hi  in my asset acounting report i have to show Loss from asset retirement . in structure ANEPV the field is MINERL. in the standard report they are using logical dtaabse ADA and node ANEPV(report  RAABGA_ALV01) . i don't want to include the node in my report.Is there any FM showing the loss value or any other way to show this value .
    THANKS in advance...

  • Error While Executing the Asset history report S_ALR_87011990

    Hi,
    I am getting the below error while executing the Asset History Report - S_ALR_87011990
    No data was selected
    Message no. AB064
    Kindly advice me

    Hi,
    Thi may be a authorisation issue. I doubt that it will get recorded in su53 for report executing. Check with basis guy for respective asset class authorization.

Maybe you are looking for

  • Providing WS in ABAP and consuming the WS in JAVA and vice-versa

    Hi Folks, Pls help me in creating  the below mentioned scenarios. 1) Providing Webservice in ABAP and Consuming in JAVA. 2) Providing Webservice in JAVA and consuming in ABAP. Also...pls let me know what are the system requirements for the above 2 sc

  • Errors during install with libraries.

    Hi, i get this errors when i try to install CrossOver Office. [jack@GNU ~]$ sh install-crossover-pro-6.0.0.sh Verifying archive integrity...OK Uncompressing CrossOver Linux Professional ./setup.sh: line 173: /home/jack/.setup9272: No existe el ficher

  • How to reuse a centrally stored Canonical Datamodel

    Hello, For a client we are placing the Canonical Data Model, containing all cross domain message definitions, in a central location. The XSD definitions are reachable with a URL, for instance http://localhost:7001/CDM/Relatie.xsd <xsd:schema xmlns:xs

  • How do i set the multiplicity between two entities to any custom value?

    Hello people, is there a way to set the multiplicity of a relation to custom values instead of only 1 or * in the logical model? I really need to set it to "1..2" but can't find an option to set own numbers. What should i do? Shall I just create a no

  • Clean up my clutter on my iMAC

    I've had my iMAC since the end of 2004. I have come to the conclusion that many of the built in programs installed will never be used by myself. I was given a program that took away the un-needed languages and that freed up 2Gigs. Does anyone know a