Asset back dated GRN.(Very urgent)
Dear Gurus,
My client is facing an issue that while making backlog they missed out to pass Some asset GRN related to Asset, say for the month April and May after all verifications they came to know that some of the Asset GRN is missing.
know the issue is now if we want to post asset GRN for the month April and MAY it is not possible because we closed the Posting period in MM till OCT.
so please any one suggest me how to post these entries if we take current date our depreciation calculation will be showing wrong Values.
Please Suggest this is very urgent.
Thanks in Advance
SU*
Dear Sivaji<
u can do this way
1) change the Dep. key in u r Asset master (0%) dep. key
2) run the Dep. run once again with Rep Run or Re Start run. ( in this case system shows u the dep. 0 for this asset.
before runing the Dep. better to check the ANLP table and after that also
3) cancell the GRN with MM Consultant help
4) cancell the PO
Regards
radha
Similar Messages
-
Please i need help very urgent !!! after deleting my exchange account because the company changed the password , I lost 150 200 contacts and i need to get them back very soon ! i never backed up on itunes ..please help
No. The contacts are "owned" by the Exchange server.
The Exchange server is owned by the company.
Everything on the Exchange server is owned by the company.
If you quit or were terminated, and your access to the system has been revoked, then there is nothing you and do at this point. Once you deleted the account from your phone, all of the associated data was deleted.
NEVER store personal information on company systems. -
Pls its very urgent - i dropped by iphone 3G and the display became very dim soon after and it still remains the same - pls advise what should be done to bring the display back to normal
sounds like you broke the display when you dropped it. There's nothing we users here can do for you.
Since the iPhone warranty does not cover accidental damage, you will have to pay to have your phone repaired or replaced. You can bring it into Apple for an out of warranty exchange in the country of purchase, or you can find a 3rd party iPhone repair store in your area. -
VERY URGENT: need to access back to trial account - also paying
Hi,
my trial account for Adobe Connect is expired.
If I'll pay for new session, will I be able to access to my trial account? (I need to download the flv registration.)
I've already asked to the Adobe Marketing: NOBODY replied to me.
It's very urgent.
Thank you,
MCSo I contacted an Italian reseller, because I didn't receive any answer from Adobe (how really really bad is the Adobe support?).
They said the registrations couldn't be recover.
How bad!
A reminder that my account was expiring and the chance to upgrade my account would have been enough...
I'm looking forward to other non-Adobe solutions with better support!
MC -
Dear All,
we need to enter the back dated Sales orders, create deliveries , issue goods, & invoice them, all in the previous dates. What we checked is everything is going fine but for only the posting to FI, is not happening. They want the posting also to happen in the previous date.
I want someone to please help me regarding this. As its very urgent.
Thanks & Regards!!Hi Navneeth,
There is a problem with schedule line in the sale order now.
While creating the sales order, i changed the requested delivery date to previous date, say 01.03.2008,
but the system is proposing the delivery date for current date that is todays date. 12.03.2008.
Waiting for the reply
Thanks & Regards!! -
my friend shared a video with me on icloud photo sharing and then she deleted it from her camera roll, how do I save it???(very urgent)
DVDs are encoded into MPEG2, which iMovie cannot edit. So you need to convert the DVD back to something else. For highest quality, I recommend that you convert the DVD to Apple Intermediate Codec. There is a free tool called MPEG Streamclip that will do this. You will also need to install the Apple QuickTIme MPEG2 Playback Component.
Here are the details.
1) Download and install the Apple MPEG2 QuickTime Component ($20) - available online from Apple.
2) Download and install MPEG Streamclip from Squared 5 (free).
3) Start MPEG Streamclip
4) Insert your DVD into your Mac. If DVD Player or Front Row starts automatically quit those.
5) Open a Finder window. Navigate to your DVD to the Video_TS folder.
6) Drag the .VOB files from the Video_TS folder and drop then into MPEG Streamclip.
7) If MPEG Streamclip offers to fix timecode breaks, say yes.
8) Use FILE/EXPORT TO QUICKTIME to convert the files to Apple Intermediate Codec (or h.264 if you prefer)
9a) Optional: You can deinterlace your footage in this step, if you like
9b) optional: If you know the date and or time of the footage, name your file
clip-yyyy-mm-dd hh;mm;ss
(let mpeg streamclip provide the extension). This will provide metadata that iMovie will use to put the event in the right year and month.
9c) Optional: If you don't want to make one huge clip out of your DVD, you can make smaller clips by using MPEG Streamclip. Move the cursor to the "in" point of the clip, and press i. Move the cursor to the "Out" point of the clip, and press o. Then do steps 8 through 10 and repeat until you have done this for all clips you want.
10) Save the resulting file in a place where you can find it, like your Desktop.
11) Open iMovie.
12) In iMovie, choose FILE/IMPORT/From File and choose the file you saved in steps 8, 9, 10.
13) iMovie will generate thumbnails and you can edit. -
Copy Master Datas in FICo from 1 Company Code to Another --- Very Urgent
Hi Peers
I want to copy all the FI & CO master Data like G/L a/cs , Vendor Master, Customer Master, Cost Centers, Cost Elements, Commitment Items, Funds Center & Assets from one company code to another company code. Both the company codes will have same Chart of accounts. Is there any t.Code by which i can just extend these masters to my company code. Plz help. its very Urgent.
Expecting a reply ASAP.
Regards
RajaramHi
In customization, Assign Chart of A/cs to company code there u will get the path for copying one company code to another company GL Masters.
And also the CCtrs u already assign to the first company code. Once u copy the data for one company to another automatically it will copy to another company code.
Hope this is useful to u.
Shammi -
Hi all,
I have displayed data in alv.and the error condition is that if for a material if it has more than one S as ok_status records then it should throw an error. This logic is working fine.
Now suppose at first time user had entered S through keyboard which fails the condition so it throws an error first time.
Now user can change the ok status back to I or O from S (through keyboard although f4 help is available) which satisfies the conditon so that record should be saved. but when user presses save button then in the ALV display the changed status I or O for that record again converted back to status S automatically. and again gives an error.
if we try third time then it allows to save with record other than s ok status i.e. I or O.
this problem is comming only when we change the value through keyboard. If we select value using f4 help then whole logic is working fine, no problem at all.
Can you please help me out in this regard
Its very urgent.
Thanks & Regards
Ashutosh.Hi,
to exclude toolbar buttons..
DATA: LT_EXCLUDE TYPE UI_FUNCTIONS.
DATA LS_EXCLUDE TYPE UI_FUNC.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_COPY_ROW.
APPEND LS_EXCLUDE TO LT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_DELETE_ROW.
APPEND LS_EXCLUDE TO LT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_APPEND_ROW.
APPEND LS_EXCLUDE TO LT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_INSERT_ROW.
APPEND LS_EXCLUDE TO LT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_MOVE_ROW.
APPEND LS_EXCLUDE TO LT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_COPY.
APPEND LS_EXCLUDE TO LT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_CUT.
APPEND LS_EXCLUDE TO LT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_PASTE.
APPEND LS_EXCLUDE TO LT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_PASTE_NEW_ROW.
APPEND LS_EXCLUDE TO LT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_UNDO.
APPEND LS_EXCLUDE TO LT_EXCLUDE.
CALL METHOD G_GRID1->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
<b> IT_TOOLBAR_EXCLUDING = LT_EXCLUDE</b>
IS_LAYOUT = GS_LAYOUT
CHANGING
IT_FIELDCATALOG = IT_FIELDCAT
IT_OUTTAB = IT_FINAL[].
and you told you are using REUSE_ALV_GRID_DISPLAY_LVC
then in the user_command do this....
then your problem will be solved.
in the top you declare this..
DATA: REF_GRID TYPE REF TO CL_GUI_ALV_GRID.
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
*then insert the following code in your USER_COMMAND routine...
IF REF_GRID IS INITIAL.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
E_GRID = REF_GRID.
ENDIF.
IF NOT REF_GRID IS INITIAL.
CALL METHOD REF_GRID->CHECK_CHANGED_DATA
ENDIF.
ENDFORM.
Regards
vijay -
XML SQL utility ( Very Urgent)
Hi,
Running the Client side Front-End works for me....Thank you
very much. These are all my questions.
1. As far as my understanding goes XML Parsers are used to parse
the incoming XML documents before updating the database. But
when I used the Oraxle XML class(getXML option)I found one
command line option called -useDOMDoc( Use the DOM API to
generate the XML doc). I am not clear about it's functionality.
Why it's being used to create a XML document? Or explain me
clearly about the functionality of getXML option?
2.With the help of putXML command line option I could insert one
XML document into Oracle 8i ( I could insert one table only). My
question is if I have a XML document which contains elements
from two tables( emp and detail) and tags from the same two
table too. In that case how could I insert into two tables? what
I should do?
For example my DTD has columns for two tables emp and detail.
Here is my xml document, and the command which I am going to use
in the command line would be
java OracleXML putXML -user "scott/tiger" -filename xxxxx emp,
details
<?xml version="1.0"?>
<!DOCTYPE ROWSET [
<!ELEMENT ROWSET (ROW)*>
<!ELEMENT ROW (EMPNO, ENAME?, JOB?, MGR?, HIREDATE?, SAL?,
COMM?, DEPTNO?)>
<!ATTLIST ROW num CDATA #REQUIRED>
<!ELEMENT EMPNO (#PCDATA)>-----------To Table EMP
<!ELEMENT ENAME (#PCDATA)>-----------To Table EMP
<!ELEMENT JOB (#PCDATA)>-------------To Table EMP
<!ELEMENT MGR (#PCDATA)>-------------To Table EMP
<!ELEMENT HIREDATE (#PCDATA)>--------To Table EMP
<!ELEMENT SAL (#PCDATA)>-------------To Table EMP
<!ELEMENT COMM (#PCDATA)>------------To Table EMP
<!ELEMENT DEPTNO (#PCDATA)>----------To Table EMP
<!ELEMENT LOCATION (#PCDATA)>--------To Table DETAILS
<!ELEMENT ALLOWANCE (#PCDATA)>-------To Table DETAILS
]>
<ROWSET>
<ROW num="1">
<EMPNO>88</EMPNO>
<ENAME>cmos</ENAME>
<LOCATION>usa</LOCATION>
<ALLOWANCE>1000</ALLOWANCE>
</ROW>
</ROWSET>
Thanks,
Chan...
nullHi Chan,
Hello Mr. "very urgent" Chan,
1- The command line front end of the XSU, besides being useful
for you users, it is also a great tool for us to test the XSU.
Basically the -useDOMDoc makes the XSU use OracleXMLDocGenDOM to
generate the doc. When using the query API you can pass the
OracleXMLDocGenDom class to the getXML request and instead of a
string contining the xml document you will get back a DOM tree
(i.e. Document object).
2- This issue is visited at:
http://f2.dejanews.com/oracletechnet/members/index.cgi?do=showmsg
&conf=Oracl1.XML&msg=1431&show=all&depth=all
Chan (guest) wrote:
: Hi,
: Running the Client side Front-End works for me....Thank you
: very much. These are all my questions.
: 1. As far as my understanding goes XML Parsers are used to
parse
: the incoming XML documents before updating the database. But
: when I used the Oraxle XML class(getXML option)I found one
: command line option called -useDOMDoc( Use the DOM API to
: generate the XML doc). I am not clear about it's functionality.
: Why it's being used to create a XML document? Or explain me
: clearly about the functionality of getXML option?
: 2.With the help of putXML command line option I could insert
one
: XML document into Oracle 8i ( I could insert one table only).
My
: question is if I have a XML document which contains elements
: from two tables( emp and detail) and tags from the same two
: table too. In that case how could I insert into two tables?
what
: I should do?
: For example my DTD has columns for two tables emp and detail.
: Here is my xml document, and the command which I am going to
use
: in the command line would be
: java OracleXML putXML -user "scott/tiger" -filename xxxxx emp,
: details
: <?xml version="1.0"?>
: <!DOCTYPE ROWSET [
: <!ELEMENT ROWSET (ROW)*>
: <!ELEMENT ROW (EMPNO, ENAME?, JOB?, MGR?, HIREDATE?, SAL?,
: COMM?, DEPTNO?)>
: <!ATTLIST ROW num CDATA #REQUIRED>
: <!ELEMENT EMPNO (#PCDATA)>-----------To Table EMP
: <!ELEMENT ENAME (#PCDATA)>-----------To Table EMP
: <!ELEMENT JOB (#PCDATA)>-------------To Table EMP
: <!ELEMENT MGR (#PCDATA)>-------------To Table EMP
: <!ELEMENT HIREDATE (#PCDATA)>--------To Table EMP
: <!ELEMENT SAL (#PCDATA)>-------------To Table EMP
: <!ELEMENT COMM (#PCDATA)>------------To Table EMP
: <!ELEMENT DEPTNO (#PCDATA)>----------To Table EMP
: <!ELEMENT LOCATION (#PCDATA)>--------To Table DETAILS
: <!ELEMENT ALLOWANCE (#PCDATA)>-------To Table DETAILS
: ]>
: <ROWSET>
: <ROW num="1">
: <EMPNO>88</EMPNO>
: <ENAME>cmos</ENAME>
: <LOCATION>usa</LOCATION>
: <ALLOWANCE>1000</ALLOWANCE>
: </ROW>
: </ROWSET>
: Thanks,
: Chan...
Oracle Technology Network
http://technet.oracle.com
null -
I had 250 photos stored in photo stream but i restore them now they are just 150. I m missing about 100 photos those were very urgent please please help
Photo stream only keeps photos in iCloud for 30 days, even though up to 1000 photos will remain on your device until you delete them (such as by restoring your phone). When you turned on photo stream again you only got back the photos added in the last 30 days as the others have already been removed.
If the missing photos were still in your camera roll when you last backed up, restoring the backup should recover them. (The backup includes camera roll photos but not photo stream photos.) -
Error in Personnel Data Iview (its very urgent)
Hi All,
Personal Data
Critical Error
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator.
failed to create or init instance of model 'com.sap.xss.hr.per.in.pdata.model.HRXSS_PER_P0002_IN' in scope APPLICATION_SCOPE with instanceId 'null'
Caused by: com.sap.tc.webdynpro.progmodel.model.api.WDModelException: failed to create instance of model 'com.sap.xss.hr.per.in.pdata.model.HRXSS_PER_P0002_IN'
at com.sap.tc.webdynpro.progmodel.model.api.WDModelFactory.getNewModelInstance(WDModelFactory.java:392)
at com.sap.tc.webdynpro.progmodel.model.api.WDModelFactory.getOrCreateModelInstanceFromScopeMaintainer(WDModelFactory.java:329)
... 65 more
Caused by: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: no jcoMetadata found for RFC function 'HRXSS_PER_GET_F4_P0002_IN'! Please verify, that your model is consistent with the ABAP backend: 'EC6'.
Hi Please help me to solve this error it's very urgent ?
thanks and regards,
Phanikumar.Hi,
I am not very much sure about this.
Are u calling a BAPi from WD application?
If yes then the error seems to be that : JCOs metadata is not available.
Please check that ur JCO definitions in portal and make sure the name in Portal and the name u defined in WD application are same( case sensitive).
Also TEST JCO in Portal.
Please revert back with current status and explain ur problem a bit more.
Regards,
Sumit -
Hi to All...
I Designed the PDF forms using Adobe Acrobat Live Cycle Designer 7.0.
but i am facing tab problem.
for example: if i entered in the some text boxes then if i want to go back to previous text boxex means curser will go to the some other text boxes.
and also if open in internet Explorer tab issue is more.
is there any property we need to set?
please guide me its very urgent.
thanks in Advance...
chalmal SeetaramTo set the Tab order choose: 'Tab Order' under 'View' menu and read through the Tips.... it is easy.
Good Luck,
SekharN -
RE: (forte-users) Hi All....very urgent...Forte doesn'thandle La rge ar
Okay, here's my three cents worth,
Are you using Forte "Keep Alive" settings? If yes, you may simply have a
time-out.
While a partition is waiting for a reply from a database, it blocks and
won't respond
to anything, including pings to check if it's still alive. So, if the query
takes longer to
complete than the time-out period of the communication manager, then you
will
loose the connection to the partition.
-----Original Message-----
From: Aberdour George [SMTP:george.aberdourdet.nsw.edu.au]
Sent: Sunday, February 13, 2000 11:39 AM
To: 'Babu Raj'; kamranaminyahoo.com
Subject: RE: (forte-users) Hi All....very urgent...Forte doesn't
handle La rge array properly
Hi,
This sounds almost identical to a problem we have experienced.
If it is the same problem it is because you have compiled a back-end
load-balanced partition, but NOT the router that manages it.
With such a configuration, attempts to send greater than a few thousand
rows
will fail - and it doesn't seem to matter what you set -fm to.
You don't see the problem running distributed from your workspace because
everything is interpreted.
So just compile the router and try again.
Hope this helps.
George Aberdour
(George.Aberdourdet.nsw.edu.au)
-----Original Message-----
From: Babu Raj [mailto:ibcsmartboyyahoo.com]
Sent: Saturday, 12 February 2000 7:24
To: kamranaminyahoo.com
Subject: (forte-users) Hi All....very urgent...Forte doesn't handle
Large array properly
Hi All,
Have anyone experienced problem of retrieving
more than 1500 records from the database table, into
the object.
I use dynamic SQL statement, and populating Array
object from the DBDataSet. When it runs from my
workspace distributed, it works fine. But, when I make
deployment, and install on the test bed, I face
Network connection failure from the client machine. It
looks like, server read the data from the Database,
and while packaging it, to send it across to the
client, server seems to run out ouf memory or couldn't
maintain the connection with the client. I tried to
set -fm flag on that partition, and separately setting
FORTE_GC_SPECIAL too, but still no luck.
we have increased, the rollback segment size on
Oracle too, but still no luck.
Appreciate, your suggestions, if you can,
Thank you,
Babu
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.comOkay, here's my three cents worth,
Are you using Forte "Keep Alive" settings? If yes, you may simply have a
time-out.
While a partition is waiting for a reply from a database, it blocks and
won't respond
to anything, including pings to check if it's still alive. So, if the query
takes longer to
complete than the time-out period of the communication manager, then you
will
loose the connection to the partition.
-----Original Message-----
From: Aberdour George [SMTP:george.aberdourdet.nsw.edu.au]
Sent: Sunday, February 13, 2000 11:39 AM
To: 'Babu Raj'; kamranaminyahoo.com
Subject: RE: (forte-users) Hi All....very urgent...Forte doesn't
handle La rge array properly
Hi,
This sounds almost identical to a problem we have experienced.
If it is the same problem it is because you have compiled a back-end
load-balanced partition, but NOT the router that manages it.
With such a configuration, attempts to send greater than a few thousand
rows
will fail - and it doesn't seem to matter what you set -fm to.
You don't see the problem running distributed from your workspace because
everything is interpreted.
So just compile the router and try again.
Hope this helps.
George Aberdour
(George.Aberdourdet.nsw.edu.au)
-----Original Message-----
From: Babu Raj [mailto:ibcsmartboyyahoo.com]
Sent: Saturday, 12 February 2000 7:24
To: kamranaminyahoo.com
Subject: (forte-users) Hi All....very urgent...Forte doesn't handle
Large array properly
Hi All,
Have anyone experienced problem of retrieving
more than 1500 records from the database table, into
the object.
I use dynamic SQL statement, and populating Array
object from the DBDataSet. When it runs from my
workspace distributed, it works fine. But, when I make
deployment, and install on the test bed, I face
Network connection failure from the client machine. It
looks like, server read the data from the Database,
and while packaging it, to send it across to the
client, server seems to run out ouf memory or couldn't
maintain the connection with the client. I tried to
set -fm flag on that partition, and separately setting
FORTE_GC_SPECIAL too, but still no luck.
we have increased, the rollback segment size on
Oracle too, but still no luck.
Appreciate, your suggestions, if you can,
Thank you,
Babu
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com -
Capex budget using Internal Oder - very urgent
Dear All
My requirement is to use statistical internal order to control the capex budget. I have created stat order , activated commitment management, availability control. and assigned order number in asster master.
But the problem is when creating purchase requisition the system should be a warning or information as per the availability control . to do this what should i do ?
Please respond .. its very urgent for me
regards
VenkatThank you Sridevi and Murali for the responses .
I want to do the aquisition of fixest asset using PR-PO-MIGO-MIRO . The system should react as per the available budget by giving warning / error at the time of PR itself. one more thing is i need not give order nuber in PR or PO as suggested by Murali . The system deriving IO number from the Asset master.
Now its working perfectly .
Now i found the reason for not working earlier .
I have done all the settings relating to Order type, Budget Profile , Availability Control every thing .
I have not done the following setting in the asset module :
In order for you to be able to makes this automatic statistical posting, all of the following must apply:
The acquisition transaction types in Asset Accounting have to be designated as relevant to the budget.
The APC asset balance sheet accounts have to be defined as statistical cost elements.
The APC asset balance sheet accounts have to have a field status definition that allows additional account assignment to orders or WBS elements.
I have rectified the above now . I hope this will help others who have the same requirement
best regards
Venkat -
Very Urgent..How to create a report Using SQ01 and Sq02.
Hi Friends,
It's very urgent.pl help me in generating a report using SQ01 and SQ02.
Help is appreciated.
thanks In advance.
Regards,
Nanditha.Check out these links...
http://www.insightcp.com/res_15.htm
http://www.ams.utoronto.ca/Assets/output/assets/adhoc_2990830.pdf.pdf
Also, do basic search in this forum...you will find a lot of threads related to this.
SKR
Maybe you are looking for
-
I got a new computer so I transfered all my old music to my new iTunes. When I play a song I have purchased on a previous computer, the song stops playing after 40 seconds or so before the song ends. What's the deal?
-
IStat Pro: which fan speeds/temps do you have (iMac)
Hi there, yes, I know, this kind of question has passed before... In order to eliminate everything which could cause my iMac to shut down itself after a while running, I really would be pleased to get a clear answer on this one. It seems more and mor
-
I submitted a order at a store for a iphone 6 plus silver on 9/22. when i would check my order a online it would say OderWe received your order and it is in process. Expected Ship Date: 10/24. As of today my order statues says We received your order
-
ITunes spinning beach ball with update
I haven't seen this anywhere else on the net yet: I'm having a problem with CPU hog when updating podcasts. iTunes has no problem when I just run the program (offline or if I don't have it automatically update podcasts). But once I set it to update o
-
Why does hiding the menu bar hide the window title?
[FF4.0] If I uncheck Menu Bar (R click top area) the title in the title bar at the top of window also disappears. IE9 just has a blank title bar! What's with the losing of the title bar? It's actually useful...